Fabrication and thermal conductivity of copper matrix composites reinforced by tungsten-coated carbon nanotubes

Abstract

Carbon nanotubes (CNTs) were coated by tungsten using metal organic chemical vapor deposition. Magnetic stirring was employed to disperse the W-coated CNTs (W-CNTs) in a Cu matrix, and then, the mixed powders were consolidated by spark plasma sintering. The W-CNTs obtained a uniform dispersion within the Cu matrix when the W-CNT content was less than 5.0vol%, but high content of W-CNTs (10vol%) resulted in the presence of clusters. The W-CNT/Cu composites containing low content of W-CNTs (<5.0vol%) exhibited a higher thermal conductivity than the sintered pure Cu, while the CNT/Cu composites exhibited no increase in thermal conductivity after the incorporation of uncoated CNTs. The W-CNT content was found to play a crucial role in determining the thermal conductivity of the W-CNT/Cu composites. The thermal conductivity of the W-CNT/Cu composites increased first and then decreased with the W-CNT content increasing. When the W-CNT content was 2.5vol%, the W-CNT/Cu composite obtained the maximum value of thermal conductivity. The thermal resistance of the (W-CNT)-Cu interface was predicted in terms of Maxwell-Garnett effective medium approximation, and its calculated value was about 3.0×10⁻⁹ m²·K·W⁻¹.

Keywords

metallic matrix composites (MMCs) / carbon nanotubes / tungsten / copper / spark plasma sintering / thermal conductivity

References

[1] Schubert Th., Brendel A., Schmid K., Koeck Th., Ciupiński Zieliński W., Weißgärber T., Kieback B. Interfacial design of Cu/SiC composites prepared by powder metallurgy for heat sink applications. Compos. Part A, 2007, 38(12): 2398

[2] Chu K., Liu Z.F., Jia C.C., Chen H., Liang X.B., Gao W.J., Tian W.H., Guo H. Thermal conductivity of SPS consolidated Cu/diamond composites with Cr-coated diamond particles. J. Alloys Compd., 2010, 49(1–2): 453

[3] D.J. Yang, Q. Zhang, G. Chen, S.F. Yoon, J. Ahn, S.G Wang, Q. Zhou, Q. Wang, and J.Q. Li, Thermal conductivity of multiwalled carbon nanotubes, Phys. Rev. B, 66(2002), No.16, art. No.165440.

[4] Baughman R.H., Zakhidov A.A., de Heer W.A. Carbon nanotubes: the route toward applications. Science, 2002, 297(5582): 787

[5] Kim S.W., Kim J.K., Lee S.H., Park S.J., Kang K.H. Thermophysical properties of multi-walled carbon nanotube-reinforced polypropylene composites. Int. J. Thermophys., 2006, 27(1): 152

[6] Huang Q., Gao L., Liu Y.Q., Sun J. Sintering and thermal properties of multiwalled carbon nanotube-BaTiO₃ composites. J. Mater. Chem., 2005, 15(3): 1995

[7] M.B. Bryning, D.E. Milkie, M.F. Islam, J.M. Kikkawa, and A.G. Yodh, Thermal conductivity and interfacial resistance in single-wall carbon nanotube epoxy composites, Appl. Phys. Lett., 87(2005), No.16, art. No.161909.

[8] Kim C., Lim B., Kim B., Shim U., Oh S., Sung B., Choi J., Ki J., Baik S. Strengthening of copper matrix composites by nickel-coated single-walled carbon nanotube reinforcements. Synth. Met., 2009, 159(5–6): 424

[9] Xu C.L., Wei B.Q., Ma R.Z., Liang J., Ma X.K., Wu D. Fabrication of aluminum-carbon nanotube composites and their electrical properties. Carbon, 1999, 37(5): 855

[10] Chu K., Wu Q.Y., Jia C.C., Liang X.B., Nie J.H., Tian W.H., Gai G.S., Guo H. Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications. Compos. Sci. Technol., 2010, 70(2): 298

[11] Cha S.I., Kim K.T., Arshad S.N., Mo C.B., Hong S.H. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing. Adv. Mater., 2005, 17(11): 1377

[12] Huxtable S.T., Cahill D.G., Shenogin S., Xue L., Ozisik R., Barone P., Usrey M., Strano M.S., Siddons G., Shim M., Keblinski P. Interfacial heat flow in carbon nanotube suspensions. Nat. Mater., 2003, 2(11): 731

[13] Shaikh S., Lafdi K., Silverman E. The effect of a CNT interface on the thermal resistance of contacting surfaces. Carbon, 2007, 45(4): 695

[14] Kim K.T., Eckert J., Liu G., Park J.M., Lim B.Y., Hong S.H. Influence of embedded-carbon nanotubes on the thermal properties of copper matrix nanocomposites processed by molecular-level mixing. Scripta Mater., 2011, 64(2): 181

[15] Ang L.M., Hor T.S., Xu G.Q., Tung C.H., Zhao S.P., Wang J.L.S. Decoration of activated carbon nanotubes with copper and nickel. Carbon, 2000, 38(3): 363

[16] Shi X.L., Yang H., Shao G.Q., Duan X.L., Yan L., Xiong Z., Sun P. Fabrication and properties of W-Cu alloy reinforced by multi-walled carbon nanotubes. Mater. Sci. Eng. A, 2007, 457(1–2): 18.

[17] Chen X.H., Xia J.T., Peng J.C., Li W.Z., Xie S.S. Carbon-nanotube metal-matrix composites prepared by electroless plating. Compos. Sci. Technol., 2000, 60(2): 301

[18] Esawi A.M.K., Morsi K., Sayed A., Gawad A., Borah P. Fabrication and properties of dispersed carbon nanotube-aluminum composites. Mater. Sci. Eng. A, 2009, 508(1–2): 167.

[19] Kwon H., Estili M., Takagi K., Miyazaki T., Kawasaki A. Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites. Carbon, 2009, 47(3): 570

[20] Nan C.W., Birringer R. Determining the Kapitza resistance and the thermal conductivity of polycrystals: a simple model. Phys. Rev. B, 1998, 57(14): 8264

[21] H.L. Zhang, J.F. Li, K.F. Yao, and L.D. Chen, Spark plasma sintering and thermal conductivity of carbon nanotubes bulk materials, J. Appl. Phys., 97(2005), No.11, art. No.114310.

[22] Majumdar A., Reddy P. Role of electron-phonon coupling in thermal conductance of metal-nonmetal interfaces. Appl. Phys. Lett., 2004, 84(23): 4768

[23] Li Q.W., Liu C.H., Fan S.S. Thermal boundary resistances of carbon nanotubes in contact with metals and polymers. Nano Lett., 2009, 9(11): 3805

[24] Stevens R.J., Smith A.N., Norris P.M. Measurement of thermal boundary conductance of a series of metal-dielectric interfaces by the transient thermoreflectance technique. J. Heat Transfer, 2005, 127(3): 315

[25] Dujardin E., Ebbesen T.W., Hiura H., Tanigaki K. Capillarity and wetting of carbon nanotubes. Science, 1994, 265(5180): 1850

[26] Ebbesen T.W. Wetting, filling and decorating carbon nanotubes. J. Phys. Chem. Solids, 1996, 57(6–8): 951

[27] Nan C.W., Liu G., Lin Y.H., Li M. Interface effect on thermal conductivity of carbon nanotube composites. Appl. Phys. Lett., 2004, 85(16): 3549

[28] P. Kim, L. Shi, A. Majumdar, and P.L. McEuen, Thermal transport measurements of individual multiwalled nanotubes, Phys. Rev. Lett., 87(2001), No.21, art. No.215502.

[29] Small J.P., Shi L., Kim P. Mesoscopic thermal and thermoelectric measurements of individual carbon nanotubes. Solid State Commun., 2003, 127(2): 181

[30] Xie X.L., Mai Y.W., Zhou X.P. Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Mater. Sci. Eng. R, 2005, 49(4): 89