Preparation and photocatalytic properties of ilmenite NiTiO₃ powders for degradation of humic acid in water

Abstract

The powders of ilmenite structure NiTiO₃ were prepared by a modified Pechini process using tetrabutyl titanate and nickel acetate as raw materials, and using citric acid and ethanol as a chelating agent and a solvent respectively. The powder samples were characterized by thermogravimetric and differential thermal analysis (TG-DTA) and X-ray diffraction (XRD). The photocatalytic activity of NiTiO₃ under the irradiation of ultraviolet rays (UV) light was evaluated by degrading humic acid (HA) in water as a probe reaction. The possible photodegradation mechanism was studied by the examination of active species ·OH, ·O₂ ⁻, and holes (h⁺) through adding scavengers. The TG-DTA and XRD results indicated that the good crystal structure of ilmenite phase NiTiO₃ could be obtained when the Ni-Ti citrate complex was calcined at 600°C. The photocatalytic activity experiments indicated that NiTiO₃ had favourable photocatalytic activity under the irradiation of UV light, and the photocatalytic degradation rate of HA reached 95.3% after a 2.5 h reaction with the photocatalyst calcined at 600°C and a photocatalyst dosage of 0.4 g/L. The possible photocatalytic mechanism was deduced that holes (h⁺) and ·OH radicals are the major reactive active species in the photocatalytic reaction, and dissolved oxygen plays a weak role in the degradation of HA.

Keywords

photocatalysis / nickel titanate / degradation / humic acid / water treatment

References

[1] Portjanskaja E., Stepanova K., Klauson D., Preis S. The influence of titanium dioxide modifications on photocatalytic oxidation of lignin and humic acids. Catal. Today, 2009, 144(1–2): 26

[2] Li X.Z., Fan C.M., Su Y.P. Enhancement of photocatalytic oxidation of humic acid in TiO₂ suspensions by increasing cation strength. Chemosphere, 2002, 48(4): 453

[3] Zhou L., Zhang S.Y., Cheng J.C., Zhang L.D., Zeng Z. Optical absorptions of nanoscaled CoTiO₃ and NiTiO₃. Mater. Sci. Eng. B, 1997, 49(2): 117

[4] Wang S.F., Lü M.K., Gu F., Song C.F., Xu D., Yuan D.R., Zhou G.J., Qi Y.X. Photoluminescence characteristics of Pb²⁺ ion in sol-gel derived ZnTiO₃ nanocrystals. Inorg. Chem. Commun., 2003, 6(2): 185

[5] Chu X.F., Liu X.Q., Wang G.Z., Meng G.Y. Preparation and gas-sensing properties of nano-CoTiO₃. Mater. Res. Bull., 1999, 34(10–11): 1789

[6] Lin Y.J., Chang Y.H., Yang W.D., Tsai B.S. Synthesis and characterization of ilmenite NiTiO₃ and CoTiO₃ prepared by a modified Pechini method. J. Non Cryst. Solids, 2006, 352(8): 789

[7] Yamamoto O., Takeda Y., Kanno R., Noda M. Perovskite-type oxides as oxygen electrodes for high temperature oxide fuel cells. Solid State Ionics, 1987, 22(2–3): 241

[8] Obayashi H., Sakurai Y., Gejo T. Perovskite-type oxides as ethanol sensors. J. Solid State Chem., 1976, 17(3): 299

[9] Phani A.R., Santucki S. Structural characterization of iron titanium oxide synthesized by sol-gel spin-coating technique. Mater. Lett., 2001, 50(4): 240

[10] Dharmaraj N., Park H.C., Kim C.K., Kim H.Y., Lee D.R. Nickel titanate nanofibers by electrospinning. Mater. Chem. Phys., 2004, 87(1): 5

[11] Sharma Y.K., Kharkwal M., Uma S., Nagarajan R. Synthesis and characterization of titanates of the formula MTiO₃ (M = Mn, Fe, Co, Ni and Cd) by co-precipitation of mixed metal oxalates. Polyhedron, 2009, 28(3): 579

[12] Lopes K.P., Cavalcante L.S., Simões A.Z., Varela J.A., Longo E., Leite E.R. NiTiO₃ powders obtained by polymeric precursor method: synthesis and characterization. J. Alloys Compd., 2009, 468(1–2): 327

[13] Sadjadi M.S., Zare K., Khanahmadzadeh S., Enhessari M. Structural characterization of NiTiO₃ nanopowders prepared by stearic acid gel method. Mater. Lett., 2008, 62(21–22): 3679

[14] Maher G.H., Hutchins C.E., Ross S.D. Preparation and characterization of ceramic fine powders produced by the emulsion process. J. Mater. Process. Technol., 1996, 56(1–4): 200

[15] Gupta V., Bamzai K.K., Kotru P.N., Wanklyn B.M. Mechanical characteristics of flux-grown calcium titanate and nickel titanate crystals. Mater. Chem. Phys., 2005, 89(1): 64

[16] Fan C.M., Min Y.Q., Hao X.G., Sun Y.P., Li X.J., Li F.B. Adsorption and photocatalytic degradation of phenol over TiO₂/ACF. Trans. Nonferrous Met. Soc. China, 2003, 13(2): 452.

[17] Xiang Q.J., Yu J.G., Wong P.K. Quantitative characterization of hydroxyl radicals produced by various photocatalysts. J. Colloid Interface Sci, 2011, 357(1): 163

[18] Chen Y.X., Yang S.Y., Wang K., Lou L.P. Role of primary active species and TiO₂ surface characteristic in UV-illuminated photodegradation of Acid Orange 7. J. Photochem. Photobiol. A, 2005, 172(1): 47

[19] Zhang L.S., Wong K.H., Zhang D.Q., Hu C., Yu J.C., Chan C.Y., Wong P.K. Zn:In(OH)_yS_z solid solution nanoplates: synthesis, characterization, and photocatalytic mechanism. Environ. Sci. Technol., 2009, 43(20): 7883

[20] Cui Y.M., Sun W.Zh. Degradation of BPB in photocatalysis enhanced by photosensitizer. Rare Met., 2006, 25(2): 141

[21] Liu H., Cheng S.A., Cao J. Z. C.N., Zhang S.K. Titanium dioxide as photocatalyst on porous nickel: Adsorption and the photocatalytic degradation of sulfosalicylic acid. Chemosphere, 1999, 38(2): 287