Growth kinetics of cubic carbide free layers in graded cemented carbides

Abstract

In order to reveal the formation mechanism of cubic carbide free layers (CCFL), graded cemented carbides with CCFL in the surface zone were fabricated by a one-step sintering procedure in vacuum, and the analysis on microstructure and element distribution were performed by scanning electron microscopy (SEM) and electron probe micro-analyzer (EPMA), respectively. A new physical model and kinetic equation were established based on experimental results. Being different from previous models, this model suggests that nitrogen diffusion outward is only considered as an induction factor, and the diffusion of titanium through liquid phase plays a dominative role. The driving force of diffusion is expressed as the differential value between nitrogen partial pressure and nitrogen equilibrium pressure essentially. Simulation results by the kinetic equation are in good agreement with experimental values, and the effect of process parameters on the growth kinetics of CCFL can also be explained reasonably by the current model.

Keywords

graded materials / cemented carbides / diffusion / kinetics

References

[1] Lengauer W., Dreyer K. Functionally graded hardmetals. J. Alloys Compd., 2002, 338(1–2): 194

[2] Llanes L., Torres Y., Anglada M. On the fatigue crack growth behavior of WC-Co cemented carbides: Kinetics description, microstructural effects and fatigue sensitivity. Acta Mater., 2002, 50, 2381

[3] List G., Nouari M., Géhin D., et al. Wear behaviour of cemented carbide tools in dry machining of aluminum alloy. Wear, 2005, 259, 1177

[4] Söderberg S., Sjöstrand M., Ljungberg B. Advances in coating technology for metal cutting tools. Met. Powder Rep., 2001, 56, 24

[5] Feng P., He Y.H., Xiao Y.F., Xie H. Advance in functionally graded cemented carbides with cubic carbide free layer. Chin. J. Nonferrous Met., 2007, 17(8): 1221.

[6] Fallqvist M., Olsson M., Ruppi S. Abrasive wear of multilayer k-Al₂O₃-Ti(C,N) CVD coatings on cemented carbide. Wear, 2007, 263(1–6): 74

[7] Fitzsimmons M., Sarin V.K. Development of CVD WC-Co coatings. Surf. Coat. Technol., 2001, 137(2–3): 158

[8] Chen L., Wu E.X., Yin F., Li J. Effects of gradient structure on the microstructures and properties of coated cemented carbides. J. Univ. Sci. Technol. Beijing, 2006, 13(4): 363

[9] Suzuki H., Hayashi K., Taniguchi Y. beta-free layer formed near the surface of vacuum-sintered WC-beta-Co alloys containing nitrogen. Trans. Jpn. Inst. Met., 1981, 22, 758.

[10] Schwarzkopf M., Exner H.E., Fischmeister H.F., Schintlmeister W. Kinetics of compositional modification of (W,Ti)C-Co alloy surface. Mater. Sci. Eng. A, 1988, 105–106, 225

[11] Gustafson P., Östlund Binder-phase enrichment by dissolution of cubic carbides. Int. J. Refract. Met. Hard Mater., 1993, 12, 129

[12] Ekroth M., Frykholm R., Lindholm M., Andrén H.O., Ågren J. Gradient zones in WC-Ti(C,N)-Co-based cemented carbides: Experimental study and computer simulations. Acta Mater., 2000, 48, 2177

[13] Frykholm R., Jansson B., Andrén H.O. The influence of carbon content on formation of carbo-nitride free surface layers in cemented carbides. Int. J. Refract. Met. Hard Mater., 2002, 20, 345

[14] Frykholm R., Ekroth M., Jansson B., Andrén H.O., Ågren J. Effect of cubic phase composition on gradient zone formation in cemented carbides. Int. J. Refract. Met. Hard Mater., 2001, 19, 527

[15] Yohe W.C. The development of cubic-carbide-free surface layers in cemented carbides without nitrogen. Int. J. Refract. Met. Hard Mater., 1993, 12, 137

[16] Frykholm R., Ekroth M., Jansson B., Ågren J., Andrén H.O. A new labyrinth factor for modeling the effect of binder volume fraction on gradient sintering of cemented carbides. Acta Mater., 2003, 51, 1115

[17] Chen L.M., Lengauer W., Ettmayer P., Dreyer K., Daub H.W. Fundamentals of liquid phase sintering for modern cermets and functionally graded cemented carbonitrides (FGCC). Int. J. Refract. Met. Hard Mater., 2000, 18, 307