Semisolid die forging process, microstructures and properties of AZ31 magnesium alloy mobile telephone shells

Abstract

A semisolid slurry of AZ31 magnesium alloy was prepared by vibrating wavelike sloping plate process, and the semisolid die forging process, microstructures, and properties of the magnesium alloy mobile telephone shell were investigated. The semisolid forging process was performed on a YA32-315 four-column universal hydraulic press. The microstructures were observed by optical microscopy, the hardness was analyzed with a model 450SVD Vickers hardometer, the mechanical properties was measured with a CMT5105 tensile test machine, and the fractograph of elongated specimens was observed by scanning electron microscopy (SEM). The results reveal that with the increase of die forging force, the microstructures of the product become fine and dense. A lower preheating temperature and a longer dwell time are favorable to the formation of fine and dense microstructures. The optimum process conditions of preparing mobile telephone shells with excellent surface quality and microstructures are a die forging force of 2000 kN, a die preheating temperature of 250°C, and a dwell time of 240 s. After solution treatment at 430°C and aging at 220°C for 8 h, the Vickers hardness is 61.7 and the ultimate tensile strength of the product is 193 MPa. Tensile fractographs show the mixing mechanisms of quasi-cleavage fracture and ductile fracture.

Keywords

magnesium alloys / semisolid forging / microstructure / mechanical properties / fracture

References

[1] Friedrich H., Schumann S. Research for a “new age of magnesium” in automotive industry. J. Mater. Process. Technol., 2001, 117(3): 276.

[2] Bussiba A., Ben Artzy A., Shtechman A., et al. Grain refinement of AZ31 and ZK60 Mg alloys-towards superplasticity studies. Mater. Sci. Eng. A, 2001, 302(1): 56.

[3] Chino Y., Kobata M., Iwasaki H., Mabuchi M. An investigation of compressive deformation behaviour for AZ91 Mg alloy containing a small volume of liquid. Acta Mater., 2003, 51(11): 3309.

[4] Luo S.J., Tian W.T., Mao W.M., Xie S.S. Semisolid process and application. Chin. J. Nonferrous Met., 2000, 10(6): 765.

[5] Mao W.M., Cui C.L., Zhao A.M., et al. Dynamical coarsening processes of microstructures in non-dendritic AlSi7Mg alloy remelted in semi-solid state. Trans. Nonferrous Met. Soc. China, 2000, 10(1): 25.

[6] Haghayeghi R., Zoqui E.J., Green N.R., Bahai H. An investigation on DC casting of a wrought aluminium alloy at below liquidus temperature by using melt conditioner. J. Alloys Compd., 2010, 502(2): 382.

[7] Ji Z.S., Hu M.L., Zheng X.P. Effect of holding time on thixotropic fluidity of semi-solid AZ91D magnesium alloy. J. Mater. Sci. Technol., 2007, 23(2): 247.

[8] Bettles C.J., Gibson M.A. Current wrought magnesium alloys: strengths and weaknesses. JOM, 2005, 57(5): 46.

[9] Wang K.K. Thixo-forging and simulation of complex parts of aluminum alloy AlSi7Mg. Int. J. Miner. Metall. Mater., 2010, 17(1): 53.

[10] Guan R.G., Wang C., Shang J.H., Xing Z.H. Semisolid metal forming by novel sloping plate process. Trans. Nonferrous Met. Soc. China, 2006, 16(z3): 1265.

[11] Guan R.G., Xing Z.H., Shi L., et al. Preparing semisolid light alloys by vibrating wavelike sloping plate process and thixoforming. Mater. Sci. Forum, 2007, 561–565, 865.

[12] Guan R.G., Cao F.R., Chen L.Q., et al. Dynamical solidification behaviors and microstructural evolution during Vibrating Wavelike Sloping Plate process. J. Mater. Process. Technol., 2009, 209(1): 2592.

[13] Xing S.M., Zhang L.Z., Tan J.B., et al. Basic rules for rheologic forging process of semisolid alloy. J. Univ. Sci. Technol. Beijing, 2004, 11(6): 566.

[14] Ioan D.C. M. a. I. Laboratory stage experiments on the semisolid state steel die forging. Metal. Int., 2008, 13(6): 49.

[15] Chen Q.F., Zhang Z.H., Xie J.X. Experimental investigation of high efficiency die forging process of precise spur gears. J. Plast. Eng., 2007, 14(6): 11.