Simulation of the continuous casting process in a mold of free-cutting steel 38MnVS based on a MiLE method

Abstract

A new method called mixed Lagrangian and Eulerian (MiLE) method was used to simulate the continuous casting process in a mold of free-cutting steel 38MnVS. The simulation results are basically in agreement with experimental data in the literature, achieving the three-dimensional visualization of temperature distribution, melt flow, shell thickness, and stress distribution of blooms in a mold. It is shown that the flow velocity of steel melt becomes smaller gradually as the casting proceeds. When the flow reaches a certain depth, two types of flow patterns can be observed in the upper zone of the mold. The first flow pattern is to flow downwards, and the second one is to flow upwards to the meniscus. The corner temperature is higher, and the thickness is thinner than those in the mid-face. The effective stress in the corner area is much bigger than that in the mid-face, indicating that the corner area is the dangerous zone of cracking.

Keywords

free-cutting steel / melt flow / continuous casting / computer simulation

References

[1] Noh W.F. Alderb B. A time-dependent two-space-dimensional coupled Eulerian-Lagrangian code. Methods in Computational Physics, 1964 New York, Academic Press, 47.

[2] J. Donea, P. Fasoli-Stellap, and S. Giuliani, Lagrangian and Eulerian finite element techniques for transient fluid structure interaction problems, Therm. Fluid/Struct. Dyn. Anal. B, 1977, p.12.

[3] Belytschko T.B., Kennedy J.M. Computer models for subassembly simulation. Nucl. Eng. Des., 1978, 49, 17.

[4] Belytschko T.B., Kennedy J.M., Schoeberle D.F. Quasi-Eulerian finite element formulation for fluid-structure interaction. J. Pressure Vessel Technol. Trans. ASME, 1980, 102, 62.

[5] Hughes T.J.R., Liu W.K., Zimmermann T.K. Lagrangian-Eulerian finite element formulation for incompressible viscous flows. Comput. Methods. Appl. Mech. Eng., 1981, 29, 329.

[6] Yu H.Q., Zhu M.Y. Numerical simulation of liquid steel superheat removal in slab continuous casting mold. Acta Metall. Sin., 2009, 45(4): 476.

[7] Saraswat R., Maijer D.M., Lee P.D., Mills K.C. The effect of mould flux properties on thermo-mechanical behaviour during billet continuous casting. ISIJ Int., 2007, 47(1): 95.

[8] Hwang J.D., Lin H.J., Hwang W.S., Hu C.T. Numerical simulation of metal flow and heat transfer during twin roll strip casting. ISIJ Int., 1995, 35(2): 170.

[9] Li C.H., Thomas B.G. Thermo-mechanical finite element model of shell behavior in the continuous casting of steel. Key Eng. Mater., 2002, 233–236, 827.

[10] Gupta D., Lahiri A.K. A water model study of the flow asymmetry inside a continuous casting mold. Metall. Mater. Trans. B, 1996, 27(5): 757.

[11] Thomas B.G., Mika L.M., Najjar F.M. Simulation of fluid flow inside a continuous slab casting machine. Metall. Trans. B, 1990, 21(3): 387.

[12] Samonds M., Waite D.M. ProCAST User Manual, 2007 USA, UES Software Inc.

[13] M. Samonds and J.Z. Zhu, Coupled Thermal-fluids-stress Analysis of Castings, UES Software Inc., USA.

[14] Cabrera-Marrero J.M., Carreňo-Galindo V., Morales R.D., et al. Macro-micro modeling of the dendritic microstructure of steel billets processed by continuous casting. ISIJ Int., 1998, 38(38): 812.

[15] Wang Z., Shen H.F., Liu B. Finite element analysis of shell growth in a continuous casting mold. J. Tsinghua Univ. Nat. Sci., 2004, 44(11): 1448.

[16] Y. Chen, X. Luo, and H.F. Shen, Finite element numerical simulation on thermo-mechanical couple in bloom mold, [in] Proceedings of the 4th International Conference on Continuous Casting of Steel in Developing Countries, Beijing, 2008, p.270.

[17] Suzuki H., Nishimura S., Yamaguchi S. Characteristics of embrittlement in steels above 600°C. Tetsu-to-Hagané, 1979, 65(14): 2038.