Formation mechanism of an aluminium-based chemical conversion coating on AZ91D magnesium alloy

Abstract

An environmentally clean aluminium-based conversion coating on AZ91D magnesium alloy was studied in aluminium nitrate solutions. The morphology, composition, structure, and formation mechanism of the coating were investigated in detail using scanning electron microscopy/energy dispersion spectrometry, X-ray diffraction, transmission electron microscopy, and electrochemical corrosion tests. The results show that the conversion coating is composed of magnesium, aluminium, and oxygen, and shows an amorphous structure. In the initial stage of coating formation, the grain-like nucleus is composed of Al₁₀O₁₅·xH₂O, (Al₂O₃)_5.333, Al₂O₃, AlO(OH), MgAl₂O₄, (Mg_0.88Al_0.12)(Al_0.94Mg_0.06)₂O₄, and (Mg_0.68Al_0.32)(Al_0.84Mg_0.16)₂O₄. The conversion coating formed in the 0.01 mol/L aluminium nitrate solution for 15 min can improve the corrosion resistance of the magnesium alloy greatly. The discussion reveals that the possible formation mechanism for the aluminium-based conversion coating is the reduction reaction on micro-cathodic sites due to the electrochemically heterogeneous magnesium alloy substrate.

Keywords

magnesium alloys / coatings / aluminium nitrate / corrosion resistance

References

[1] Gray J.E., Luan B. Protective coatings on magnesium and its alloys—A critical review. J. Alloys Compd., 2002, 336(1–2): 88.

[2] Chen Z.H., Ren X.P., Zhang Y. Effect of RE on the ignition-proof, microstructure and properties of AZ91D magnesium alloy. J. Univ. Sci. Technol. Beijing, 2005, 12(6): 540.

[3] Li W.P., Zhu L.Q., Li Y.L., Zhao B. Growth characterization of anodic film on AZ91D magnesium alloy in an electrolyte of Na₂SiO₃ and KF. J. Univ. Sci. Technol. Beijing, 2005, 13(6): 450.

[4] Montemor M.F., Simoes A.M., Carmezim M.J. Characterization of rare-earth conversion films formed on the AZ31 magnesium alloy and its relation with corrosion protection. Appl. Surf. Sci., 2007, 253(16): 6922.

[5] Zucchi F., Frignani A., Grassi V., et al. Stannate and permanganate conversion coatings on AZ31 magnesium alloy. Corros. Sci., 2007, 49(12): 4542.

[6] Lin C.S., Lee C.Y., Li W.C., et al. Formation of phosphate/permanganate conversion coating on AZ31 magnesium alloy. J. Electrochem. Soc., 2006, 153(3): B90.

[7] Dabalà M., Brunelli K., Napolitani E., Magrini M. Cerium-based chemical conversion coating on AZ63 magnesium alloy. Surf. Coat. Technol., 2003, 172(2–3): 227.

[8] Chong K.Z., Shih T.S. Conversion-coating treatment for magnesium alloys by a permanganate-phosphate solution. Mater. Chem. Phys., 2003, 80(1): 191.

[9] Zhao M., Wu S.S., Luo J.R., et al. A chromium-free conversion coating of magnesium alloy by a phosphate-permanganate solution. Surf. Coat. Technol., 2006, 200(18–19): 5407.

[10] Lin J.K., Hsia C.L., Uan J.Y. Characterization of Mg,Al-hydrotalcite conversion film on Mg alloy and Cl⁻ and CO₃ ²⁻ anion-exchangeability of the film in a corrosive environment. Scripta Mater., 2007, 56(11): 927.

[11] Kouisni L., Azzi M., Zertoubi M., et al. Phosphate coatings on magnesium alloy AM60 part 1: Study of the formation and the growth of zinc phosphate films. Surf. Coat. Technol., 2004, 185(1): 58.

[12] Umehara H., Takaya M., Terauchi S. Chrome-free surface treatments for magnesium alloy. Surf. Coat. Technol., 2003, 169–170(2): 666.

[13] Liang J., Guo B., Tian J., et al. Effects of NaAlO₂ on structure and corrosion resistance of microarc oxidation coatings formed on AM60B magnesium alloy in phosphate-KOH electrolyte. Surf. Coat. Technol., 2005, 199(2): 121.