Microstructure and mechanical properties of F_GBA/B_G air cooling bainitic steels containing niobium

Abstract

The effect of different Nb additions on the mechanical properties and microstructure evolution of grain boundary allotriomorphic ferrite (F_GBA) / granular bainite (B_G) air cooling bainitic steels was investigated. The results indicate that the tensile strength and yield strength increase by 157 and 97 MPa, respectively with the addition of 0.02wt% Nb. The steel acquires superior strength and toughness with the addition of 0.06wt% Nb. The results of scanning electron microscopy and transmission electron microscopy reveal that the addition of Nb not only refines the size of granular bainite but also increases the volume fraction of granular bainite in F_GBA/B_G steels. The refinement effect of granular bainite is improved with the increase of Nb content.

Keywords

granular bainite / microstructure evolution / mechanical properties / Nb

References

[1] Irvine K.J., Pickering F.B., Gladman T.R. Grain-refined C-Mn steels. J. Iron Steel Inst., 1967, 205(2): 161.

[2] Yada H., Li C.M., Yamagata H. Dynamic γ→α transformation during hot deformation in iron-nickel-carbon alloys. ISIJ Int., 2000, 40(2): 200.

[3] Fang H.S., Xu P.G., Bai B.Z., et al. New duplex microstructure-grain boundary allotriomorphic ferrite/granular bainite. Heat Treat. Met., 2000, 25(11): 1.

[4] Xu P.G., Fang H.S., Bai B.Z. Development of grain boundary allotriomorphic ferrite/granular bainite duplex steel. J. Univ. Sci. Technol. Beijing., 2003, 10(2): 39.

[5] Xu P.G., Fang H.S., Bai B.Z. Toughness of grain boundary allotriomorphic ferrite/granular bainite duplex microstructure. Acta Metall. Sin., 2002, 38(3): 255.

[6] Wang J.P., Yang Z.G., Bai B.Z., et al. Grain refinement and microstructural evolution of grain boundary allotriomorphic ferrite/granula bainite steel after prior austenite deformation. Mater. Sci. Eng. A, 2004, 369(1–2): 112.

[7] Long L., Ding H., Du L.X., et al. Microstructures and mechanical property of low carbon manganese steel with grain boundary allotriomorphic ferrite/bainite structure. Acta Metall. Sin., 2006, 42(11): 1227.

[8] Hehemann R.F., Kinsman K.R., Aaronson H.I. Growth kinetics and mechanism of bainite transformation. Metall. Trans., 1972, 3(3): 1977.

[9] Fang H.S., Bai B.Z., Zheng X.H., et al. Morphology and phase transformation of granular bainite and granular structure. Acta Metall. Sin., 1986, 22(4): a283.

[10] Kudjumow F., Sachs G. The mechanism of steel hardening. Z. Phys., 1930, 64(5): 325.

[11] Kinsman K.R., Eichen E., Aaronson H.I. Thickening kinetics of pro-eutectoid ferrite plates in Fe-C alloys. Metall. Trans., 1975, 6(2): 303.

[12] Edmonds D.V., Cochrane R.C. Structure-property relationships in bainitic steels. Metall. Trans. A, 1990, 21, 1527.

[13] Fegredo D.M. Hold-period accelerated cooling experiments on Nb- and Ti-HSLA steels. Met. Technol., 1977, 4(9): 417.

[14] Shanmugam S., Ramisetti N.K., Misra R.D.K., et al. Microstructure and high strength-toughness combination of a new 700 MPa Nb-microalloyed pipeline steel. Mater. Sci. Eng. A, 2008, 478(1–2): 26.

[15] Aaronson H.I. Decomposition of Austenite by Diffusional Processes, 1962 New York, Interscience Press, 387.

[16] Balasubramanian K., Kroupa A., Jirkaldy J.S. Experimental investigation of the thermodynamics of Fe-Nb-C austenite and nonstoichiometric niobium and titanium carbides (T=1273 to 1473 K). Metall. Trans. A, 1992, 23(3): 729.

[17] Fang H.S., Wang J.J., Yang Z.G., et al. Bainite Transformation, 1999 Beijing, Science Press, 10.

[18] Bhadeshia H.K.D.H. Bainite in Steels, 2001 London, IOM Communications Ltd., 112.