Preparation and performance of dye-sensitized solar cells based on ZnO-modified TiO₂ electrodes

Abstract

The ZnO-modified TiO₂ electrode was prepared by adding Zn(CH₃COO)₂·2H₂O to the TiO₂ colloid during the sol-gel production process, and was used in dye-sensitized solar cells (DSCs). The open circuit voltage (V _OC) and fill factor (ff) of the cells were improved significantly. The performances of the ZnO-modified TiO₂ electrode such as dark current, transient photocurrent, impedance, absorption spectra, and flat band potential (V _fb) were investigated. It is found that the interface charge recombination impedance increases and V _fb shifts about 200 mV toward the cathodic potential. The effect mechanism of ZnO modification on the performance of DSCs may be that ZnO occupies the surface states of the TiO₂ film.

Keywords

dye-sensitized solar cells / TiO₂ electrode / modification / photoelectrochemical properties

References

[1] O’Regan B., Grätzel M. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO₂ film. Nature, 1991, 353, 737.

[2] Barbé C.J., Arendse F., Comte P., et al. Nanocrystalline titanium oxide electrodes for photovoltaic applications. J. Am. Ceram. Soc., 1997, 80, 3157.

[3] Grätzel M. Photoelectrochemical cells. Nature, 2001, 414, 338.

[4] Yamamoto J., Tan A., Shiratsuchi R., et al. A 4% efficient dye-sensitized solar cell fabricated from cathodically electrosynthesized composite titania films. Adv. Mater., 2003, 15, 1823.

[5] W. Kubo, T. Kitamura, K. Hanabusa, et al., Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator, Chem. Commun., (2002), p.374.

[6] K. Tennakone, G.R.R.A. Kumara, I.R.M. Kottegoda, et al., An efficient dye-sensitized photoelectrochemical solar cell made from oxides of tin and zinc, Chem. Commun., 1999, No.1, p.15.

[7] Sheng X., Zhao Y., Zhai J., et al. Electro-hydrodynamic fabrication of ZnO-based dye sensitized solar cells. Appl. Phys. A, 2007, 87, 715.

[8] Park N.G., Kang M.G., Kim K.M., et al. Morphological and photoelectrochemical characterization of core-shell nanoparticle films for dye-sensitized solar cells: ZnO type shell on SnO₂ and TiO₂ cores. Langmuir, 2004, 20, 4246.

[9] Palomares E., Clifford J.N., Haque S.A., et al. Control of charge recombination dynamics in dye sensitized solar cells by the use of conformally deposited metal oxide blocking layers. J. Am. Chem. Soc., 2003, 125, 475.

[10] Van de Lagemaat J., Park N.G., Frank A.J. Influence of electrical potential distribution charge transport and recombination on the photopotential and photocurrent conversion efficiency of dye-sensitized nanocrystalline TiO₂ solar cells: A study by electrical impedance and optical modulation techniques. J. Phys. Chem. B, 2000, 104, 2044.

[11] Chen S.G., Chappel S., Diamant Y., et al. Preparation of Nb₂O₅ coated TiO₂ nanoporous electrodes and their application in dye-sensitized solar cells. Chem. Mater., 2001, 13, 4629.

[12] Jung H.S., Lee J.K., Nastasi M. Preparation of nanoporous MgO-coated TiO₂ nanoparticles and their application to the electrode of dye-sensitized solar cells. Langmuir, 2005, 21, 10332.

[13] Zhang X.T., Sutanto I., Taguchi T., et al. Al₂O₃-coated nanoporous TiO₂ electrode for solid-state dye-sensitized solar cell. Sol. Energy. Mater. Sol. Cells, 2003, 80, 315.

[14] Wang Z.S., Yanagida M., Sayama K., et al. Electronic-insulating coating of CaCO₃ on TiO₂ electrode in dye-sensitized solar cells: Improvement of electron lifetime and efficiency. Chem. Mater., 2006, 18, 2912.

[15] Kim S.S., Yum J.H., Sung Y.E. Flexible dye-sensitized solar cells using ZnO coated TiO₂ nanoparticles. J. Photochem. Photobiol. A, 2005, 171, 269.

[16] Kim K.E., Jang S.R., Park J., et al. Enhancement in the performance of dye-sensitized solar cells containing ZnO-covered TiO₂ electrodes prepared by thermal chemical vapor deposition. Sol. Energy. Mater. Sol. Cells, 2007, 91, 366.

[17] S.J. Roh, R.S. Mane, S.K. Min, et al., Achievement of 4.51% conversion efficiency using ZnO recombination barrier layer in TiO₂ based dye-sensitized solar cells, Appl. Phys. Lett., 89(2006), Art. No.253512.

[18] Nazeeruddin M.K., Kay A., Rodicio I., et al. Conversion of light to electricity by cis-X₂bis(2,2′-bipyridyl-4,4′-dicarboxylate) ruthenium(II) charge transfer sensitizers (X=Cl⁻, Br⁻, I⁻, CN⁻, and SCN⁻) on nanocrystalline TiO₂ electrodes. J. Am. Chem. Soc., 1993, 115, 6382.

[19] Wang M., Zhang Q.L., Weng Y.X., et al. Investigation of mechanisms of enhanced open-circuit photovoltage of dye-sensitized solar cells based the electrolyte containing 1-hexyl-3-methylimidazolium iodide. Chin. Phys. Lett., 2006, 23, 724.

[20] Redmond G., Fitzmaurice D. Spectroscopic determination of flatband potentials for polycrystalline TiO₂ electrodes in nonaqueous solvents. J. Phys. Chem., 1993, 97, 1426.

[21] Hoshikawa T., Kikuchi R., Eguchi K.J. Impedance analysis for dye-sensitized solar cells with a reference electrode. Electroanal. Chem., 2006, 588, 59.

[22] Koide N., Islam A., Chiba Y., et al. Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit. J. Photochem. Photobiol. A, 2006, 182, 296.

[23] Schlichthörl G., Huang S.Y., Sprague J., et al. Band edge movement and recombination kinetics in dye-sensitized nanocrystalline TiO₂ solar cells: A study by intensity modulated photovoltage spectroscopy. J. Phys. Chem. B, 1997, 101, 8141.

[24] Dloczik L., IIeperuma O., Lauermann I., et al. Dynamic response of dye-sensitized nanocrystalline solar cells: characterization by intensity-modulated photocurrent spectroscopy. J. Phys. Chem. B, 1997, 101, 10281.

[25] Linsebigler A.L., Lu G., Yates J.T. Photocatalysis on TiO₂ surfaces: Principles, mechanisms, and selected results. Chem. Rev., 1995, 95, 735.

[26] Yin X., Zhao H., Chen L.P., et al. The effects of pyridine derivative additives on interface processes at nanocrystalline TiO₂ thin film in dye-sensitized solar cells. Surf. Interface Anal., 2007, 39, 809.

[27] Liu Y., Hagfeldt A., Xiao X.R., et al. Investigation of influence of redox species on the interfacial energetics of a dye-sensitized nanoporous TiO₂ solar cell. Sol. Energy. Mater. Sol. Cells, 1998, 55, 267.

[28] Watson D.F., Meyer G.J. Cation effects in nanocrystalline solar cells. Coord. Chem. Rev., 2004, 248, 1391.