Enhancing performance of mining phenolic filling materials by tailoring closed cell morphology with fly ash geopolymer

Abstract

Phenolic foam (PF) has attracted growing attention in plugging areas due to its lightweight, flame retardancy and high fillability, yet its friable character and high reaction temperature severely weaken its potentials toward practical coal mining applications. Herein, a novel phenolic composite material filled with modified fly ash (MFA) geopolymer has been proposed to address the above issues. By modifying fly ash (FA) particles with siloxanes, robust interfacial bonding between the organic PF polymer and inorganic geopolymer network has been established, which enables modulation of their micro-morphologies to optimize their macro performances. The foam structure of PF evolves from an open-cell to a closed-cell morphology with the incorporation of MFA, leading to a decreased pulverization ratio (41%) while enhanced mechanical properties (15%). Compared with neat PF, the composite exhibits faster gelation dynamics during curing, with a maximum reaction temperature as low as only 40 °C. PF/MFA composite show high reliability against gas leakage during a laboratory designed coal mine plugging test. Furthermore, the formation of a silica hybrid char layer with higher graphitization degree and a multiple continuous closed-cell structure following the combustion of PF/MFA effectively inhibits the release of combustible volatiles and toxic gases. It is provided that this strategy of geopolymer filled polymer cross-linking networks with tunable morphology opens up an avenue for advanced mining phenolic filling materials.

Keywords

Continuous closed-cell structure / Fly ash geopolymer / Coal mining / Filling and plugging ability / Flame retardancy

Acknowledgments

This study was supported by the National Natural Science Foun-dation of China (No. U22A20151), and Taiyuan Major Science and Technology Project in 2021.

Supplementary material

Supplementary data to this article can be found online at https://doi.org/10.1016/j.ijmst.2025.06.008.

References

[1] Oliveira MLS, Pinto D, Tutikian BF, da Boit K, Saikia BK, Silva LFO. Pollution from uncontrolled coal fires: continuous gaseous emissions and nanoparticles from coal mines. J Clean Prod 2019; 215:1140-8.

[2] Zheng XZ, Zhang D, Wen H. Design and performance of a novel foaming device for plugging air leakage in underground coal mines. Powder Technol 2019; 344:842-8.

[3] Li QL, Chen L, Ding JJ, Zhang JJ, Li XH, Zheng K, Zhang X, Tian XY. Open-cell phenolic carbon foam and electromagnetic interference shielding properties. Carbon 2016; 104:90-105.

[4] Xu K, Li S, Lu C, Liu J. Risk assessment of coal mine gas explosion based on cloud integrated similarity and fuzzy DEMATEL. Process Saf Environ Prot 2023; 177:1211-24.

[5] Yuan H, Liu JP, Yuan YJ. Using 4-D seismic data for detecting gob areas of coal mines: A case study from the Zhangji coal mine. IEEE Trans Geosci Remote Sens 2022; 60:5917810.

[6] Tang KH, Tang XJ, Liu XF, Zhang AL, Ge TJ, Li YJ. Phenolic foams toughened with triethylene glycol by in situ polymerization and prepolymerization processes. ACS Appl Polym Mater 2022; 4(11):8303-14.

[7] Li XY, Wang ZZ, Wu LX. Preparation of a silica nanospheres/graphene oxide hybrid and its application in phenolic foams with improved mechanical strengths, friability and flame retardancy. RSC Adv 2015; 5(121):99907-13.

[8] Reghunadh Sarika P, Nancarrow P, Ibrahim T. Comparison of toughening effects of various additives on phenolic foam. ACS Omega 2024; 9 (4):4695-704.

[9] Liu L, Wang ZZ. Facile synthesis of a novel magnesium amino-tris-(methylenephosphonate)-reduced graphene oxide hybrid and its high performance in mechanical strength, thermal stability, smoke suppression and flame retardancy in phenolic foam. J Hazard Mater 2018; 357:89-99.

[10] Hou F, Zhong XX, Zanoni MAB, Rashwan TL, Torero JL. Quantifying oxygen diffusion during thermal degradation of combustible porous media. Appl Therm Eng 2024; 257:124219.

[11] Song SA, Chung YS, Kim SS. The mechanical and thermal characteristics of phenolic foams reinforced with carbon nanoparticles. Compos Sci Technol 2014; 103:85-93.

[12] Akatsuka M, Takezawa Y, Amagi S. Influences of inorganic fillers on curing reactions of epoxy resins initiated with a boron trifluoride amine complex. Polymer 2001; 42(7):3003-7.

[13] Ma XD, Da YQ, He TS, Su FY, Wan ZM. Improvement of harmlessness and resource utilization of incineration fly ash by high temperature sintering. J Build Eng 2024; 84:108589.

[14] Ngo I, Ma LQ, Zhai JT, Wang YY. Enhancing fly ash utilization in backfill materials treated with CO2 carbonation under ambient conditions. Int J Min Sci Technol 2023; 33(3):323-37.

[15] Pattanaik A, Mukherjee M, Mishra SB. Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite. Compos Part B Eng 2019; 176:107301.

[16] Kuźnia M, Magiera A, Pielichowska K, Zia˛bka M, Benko A,Szatkowski P, Jerzak W. Fluidized bed combustion fly ash as filler in composite polyurethane materials. Waste Manag 2019; 92:115-23.

[17] Liu X, Ni CW, Meng K, Zhang LY, Liu DX, Sun LZ. Strengthening mechanism of lightweight cellular concrete filled with fly ash. Constr Build Mater 2020; 251:118954.

[18] Lu CY, Wang QP, Liu YX, Xue TT, Yu QB, Chen S. Influence of new organic alkali activators on microstructure and strength of fly ash geopolymer. Ceram Int 2022; 48(9):12442-9.

[19] Aliabdo AA, Abd Elmoaty AEM, Salem HA. Effect of cement addition, solution resting time and curing characteristics on fly ash based geopolymer concrete performance. Constr Build Mater 2016; 123:581-93.

[20] Jiang ZQ, Xue B, Mai XP, Wu CM, Zeng LJ, Xie L, Zheng Q. Integrating fly ash-controlled surface morphology and candle grease coating: access to highly hydrophobic poly (L-lactic acid) composite for anti-icing application. Nanomaterials 2023; 13(7):1230.

[21] Li FP, Chen QS, Lu YY, Zou YL, Li S. Dry shrinkage and micro-structure of alkali-activated fly ash/slag pastes incorporated with silane coupling agent modified MWCNTs. Cem Concr Res 2024; 175:107382.

[22] Deng P, Shi Y, Liu YS, Liu Y, Wang Q. Solidifying process and flame retardancy of epoxy resin cured with boron-containing phenolic resin. Appl Surf Sci 2018; 427:894-904.

[23] Liu C, Xu LH, Deng JS, Han ZG, Li Y, Wu JH, Tian J, Wang DH, Xue K, Fang JM. Exploring the mechanism of a novel cationic surfactant in bastnaesite flotation via the integration of DFT calculations, in situ AFM and electrochemistry. Int J Min Sci Technol 2024; 34(10):1475-84.

[24] Liu JP, Li XY, Lu YS, Bai XH. Effects of Na/Al ratio on mechanical properties and microstructure of red mud-coal metakaolin geopolymer. Constr Build Mater 2020; 263:120653.

[25] Ren QM, Li XZ, Ji YK, Ding XL, Sun Q, Zhao P, Li F, Vandeginste V. Thermal insulation of phenolic resin modified fly ash geopolymer. Constr Build Mater 2023; 409:133840.

[26] Wang ZH, Liu BW, Zeng FR, Lin XC, Zhang JY, Wang XL, Wang YZ, Zhao HB. Fully recyclable multifunctional adhesive with high durability, transparency, flame retardancy, and harsh-environment resistance. Sci Adv 2022; 8(50): eadd8527.

[27] Song SA, Lee Y, Kim YS, Kim SS. Mechanical and thermal properties of carbon foam derived from phenolic foam reinforced with composite particles. Compos. Struct. 2017; 173:1-8.

[28] Luo M, Liu BJ, Li TY, Xu JB, Zhu NG, Zeng XB, Jiang TH, He L. Effect of viscosity on foaming behavior and surface quality of foamed Polyamide 6. J Appl Polym Sci 2023; 140(43):e54588.

[29] Liu SX, Wang W, Xin S, Meng XX, Zhang Z. Preparation and characterization of oligomeric thermal phase change polyurethane foam. J Energy Storage 2023; 72:108703.

[30] Li QL, Chen L, Li XH, Zhang JJ, Zhang X, Zheng K, Fang F, Zhou HF, Tian XY. Effect of multi-walled carbon nanotubes on mechanical, thermal and electrical properties of phenolic foam via in situ polymerization. Compos Part A Appl Sci Manuf 2016; 82:214-25.

[31] Chen XK, Yu WC, Ma L, Zhou SS, Liu XX. Mechanical properties and thermal characteristics of different-density phenolic foams. J Therm Anal Calorim 2021; 144(2):393-401.

[32] Mao J, Zhuang QX, Peng S, Liu Q, Qian J. Effect of modified phenolic resin on crosslinked network and performances of polyvinyl acetate blending emulsion. J Appl Polym Sci 2018; 135(27):46448.

[33] Li JJ, Zhang AB, Zhang SF, Gao Q, Zhang W, Li JZ. Larch tannin-based rigid phenolic foam with high compressive strength, low friability, and low thermal conductivity reinforced by cork powder. Compos Part B Eng 2019; 156:368-77.

[34] Del Saz-Orozco B, Alonso MV, Oliet M, Domínguez JC, Rodriguez F.Mechanical, thermal and morphological characterization of cellulose fiber-reinforced phenolic foams. Compos Part B Eng 2015; 75:367-72.

[35] Song F, Li Z, Jia PY, Bo CY, Zhang M, Hu LH, Zhou YH. Phosphorus-containing tung oil-based siloxane toughened phenolic foam with good mechanical properties, fire performance and low thermal conductivity. Mater Des 2020; 192:108668.

[36] Del Saz-Orozco B, Alonso MV, Oliet M, Domínguez JC, Rojo E, Rodriguez F. Lignin particle- and wood flour-reinforced phenolic foams: Friability, thermal stability and effect of hygrothermal aging on mechanical properties and morphology. Compos Part B Eng 2015; 80:154-61.

[37] Bo CY, Wei SK, Hu LH, Jia PY, Liang BC, Zhou J, Zhou YH. Synthesis of a cardanol-based phosphorus-containing polyurethane prepolymer and its application in phenolic foams. RSC Adv 2016; 6(67):62999-3005.

[38] Tang KH, He XF, Xu GQ, Tang XJ, Ge TJ, Zhang AL. Effect of formaldehyde to phenol molar ratio on combustion behavior of phenolic foam. Polym Test 2022; 111:107626.

[39] Liu J, Wang LL, Zhang W, Han YM. Phenolic resin foam composites reinforced by acetylated poplar fiber with high mechanical properties, low pulverization ratio, and good thermal insulation and flame retardant performance. Materials 2019; 13(1):148.

[40] Melro E, Duarte H, Antunes FE, Valente AJM, Romano A,Norgren M, Medronho B. Engineering novel phenolic foams with lignin extracted from pine wood residues via a new levulinic-acid assisted process. Int J Biol Macromol 2023; 248:125947.

[41] Gao C, Li M, Zhu CJ, Hu YQ, Shen T, Li MY, Ji XX, Lyu GJ, Zhuang W. One-pot depolymerization, demethylation and phenolation of lignin catalyzed by HBr under microwave irradiation for phenolic foam preparation. Compos Part B Eng 2021; 205:108530.

[42] Li MG, Wang SX, Han LX, Yuan WJ, Cheng JB, Zhang AN, Wang YZ. Hierarchically porous SiO2/polyurethane foam composites towards excellent thermal insulating, flame-retardant and smoke-suppressant performances. J Hazard Mater 2019; 375:61-9.

[43] Liu JJ, Wang W, Yuen RKK, Gui Z, Hu Y. 1/2D SnO2 nanowires on MnO2 nanosheets hybrid architecture for reducing fire hazards of epoxy nanocomposites. Compos Part A Appl Sci Manuf 2018; 107:461-70.

[44] Zhang WJ, Zhou MT, Kan YC, Chen J, Hu Y, Xing WY. Synthesis and flame retardant efficiency study of two phosphorus-nitrogen type flame retardants containing triazole units. Polym Degrad Stab 2023; 208:110236.

[45] Wu NJ, Fu GL, Yang Y, Xia MF, Yun H, Wang QG. Fire safety enhancement of a highly efficient flame retardant poly(phenylphosphoryl phenylenediamine) in biodegradable poly(lactic acid). J Hazard Mater 2019; 363:1-9.

[46] Li Q, Zhu YQ, Eichhorn SJ. Carbonized electrospun cellulose composite nanofibres containing silicon carbide nanoparticles. Compos Part A Appl Sci Manuf 2019; 123:71-8.

[47] Vasiljević J, Jerman I, Jakša G, Alongi J, Malucelli G, Zorko M, Tomšič B, Simončič B. Functionalization of cellulose fibres with DOPO-polysilsesquioxane flame retardant nanocoating. Cellulose 2015; 22 (3):1893-910.

[48] Qiu Y, Qian LJ, Feng HS, Jin SL, Hao JW. Toughening effect and flame-retardant behaviors of phosphaphenanthrene/phenylsiloxane bigroup macromolecules in epoxy thermoset. Macromolecules 2018; 51(23):9992-10002.

[49] Fang YZ, Miao JS, Yang XW, Zhu Y, Wang GY.Fabrication of polyphosphazene covalent triazine polymer with excellent flame retardancy and smoke suppression for epoxy resin. Chem Eng J 2020; 385:123830.

[50] Dong H, Hu XM, Liu JD, Liang YT, Wang W, Tang H, Zhu FS, He ZL, Wang P. Study of preparation and properties of environmentally friendly phenolic resin for mining. J Appl Polym Sci 2023; 140(23):e53932.