Three-magnet-ring quasi-zero stiffness isolator for low-frequency vibration isolation

Abstract

A three-magnet-ring quasi-zero stiffness (QZS-TMR) isolator is designed to solve the problem of low-frequency vibration isolation in the vertical direction of precision equipment. QZS-TMR has both positive and negative stiffness structures. The positive stiffness structure consists of two mutually repelling magnetic rings and the negative stiffness structure consists of two magnetic rings nested within each other. By modulating the relative distance between positive and negative stiffness structures, the isolator can have QZS characteristics. Compared with other QZS isolators, the QZS-TMR is compact and easy to manufacture. In addition, the working load of QZS-TMR can be flexibly adjusted by varying the radial widths of the inner magnetic ring. In this paper, the static analysis of QZS-TMR is carried out to guide the design, and the low-frequency vibration isolation performance is studied. In addition, the experimental prototype of QZS-TMR is designed and manufactured. The static and vibration isolation experiments are carried out on the prototype. The results show that the initial vibration isolation frequency of the experimental prototype is about 4 Hz. The results show an excellent low-frequency vibration isolation effect, which is consistent with the theoretical research. This paper introduces a new approach to the design of the QZS isolator.

Keywords

low-frequency vibration isolation / magnet rings / quasi-zero stiffness / vibration isolator

References

[1] Molyneux WG. Supports for Vibration Isolation. Her Majesty’s Stationery Office;1957.

[2] Carrella A, Brennan MJ, Kovacic I, Waters TP. On the force transmissibility of a vibration isolator with quasi-zero-stiffness. J Sound Vib. 2009;322(4-5):707-717.

[3] Kovacic I, Brennan MJ, Lineton B. Effect of a static force on the dynamic behaviour of a harmonically excited quasi-zero stiffness system. J Sound Vib. 2009;325(4-5):870-883.

[4] Zhang YT, Cao QJ, Huang WH. Bursting oscillations in an isolation system with quasi-zero stiffness. Mech Syst Signal Process. 2021;161:107916.

[5] Hao Z, Cao Q, Wiercigroch M. Nonlinear dynamics of the quasizero-stiffness SD oscillator based upon the local and global bifurcation analyses. Nonlinear Dyn. 2017;87(2):987-1014.

[6] Ravindra B, Mallik AK. Hard Duffing-type vibration isolator with combined Coulomb and viscous damping. Int J Non Linear Mech. 1993;28(4):427-440.

[7] Meng Q, Hou L, Lin R, et al. Accurate nonlinear dynamic characteristics analysis of quasi-zero-stiffness vibration isolator via a modified incremental harmonic balance method. Nonlinear Dyn. 2024;112(1):125-150.

[8] Gatti G, Svelto C. Performance of a vibration isolator with sigmoidal force-deflection curve. J Vib Control. 2023;29(23-24):5713-5724.

[9] Zhao F, Ji J, Luo Q, Cao S, Chen L, Du W. An improved quasi-zero stiffness isolator with two pairs of oblique springs to increase isolation frequency band. Nonlinear Dyn. 2021;104(1):349-365.

[10] Gatti G. A nonlinear quasi-zero stiffness vibration isolator with quintic restoring force characteristic: a fundamental analytical insight. J Vib Control. 2023.In press.

[11] Le TD, Ahn KK. Experimental investigation of a vibration isolation system using negative stiffness structure. Int J Mech Sci. 2013;70:99-112.

[12] Le TD, Ahn KK. A vibration isolation system in low frequency excitation region using negative stiffness structure for vehicle seat. J Sound Vib. 2011;330(26):6311-6335.

[13] Wang X, Liu H, Chen Y, Gao P. Beneficial stiffness design of a high-static-low-dynamic-stiffness vibration isolator based on static and dynamic analysis. Int J Mech Sci. 2018;142-143:235-244.

[14] Shahraeeni M, Sorokin V, Mace B, Ilanko S. Effect of damping nonlinearity on the dynamics and performance of a quasi-zerostiffness vibration isolator. J Sound Vib. 2022;526:116822.

[15] Liu C, Yu K. Superharmonic resonance of the quasi-zero-stiffness vibration isolator and its effect on the isolation performance. Nonlinear Dyn. 2020;100(1):95-117.

[16] Zhou J, Wang X, Xu D, Bishop S. Nonlinear dynamic characteristics of a quasi-zero stiffness vibration isolator with cam-roller-spring mechanisms. J Sound Vib. 2015;346:53-69.

[17] Ye K, Ji JC, Brown T. Design of a quasi-zero stiffness isolation system for supporting different loads. J Sound Vib. 2020;471:115198.

[18] Zhou J, Xu D, Bishop S. A torsion quasi-zero stiffness vibration isolator. J Sound Vib. 2015;338:121-133.

[19] Wang K, Zhou J, Xu D. Sensitivity analysis of parametric errors on the performance of a torsion quasi-zero-stiffness vibration isolator. Int J Mech Sci. 2017;134:336-346.

[20] Liu X, Huang X, Hua H. On the characteristics of a quasi-zero stiffness isolator using Euler buckled beam as negative stiffness corrector. J Sound Vib. 2013;332(14):3359-3376.

[21] Huang X, Liu X, Sun J, Zhang Z, Hua H. Effect of the system imperfections on the dynamic response of a high-static-low-dynamic stiffness vibration isolator. Nonlinear Dyn. 2014;76(2):1157-1167.

[22] Huang X, Liu X, Sun J, Zhang Z, Hua H. Vibration isolation characteristics of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: a theoretical and experimental study. J Sound Vib. 2014;333(4):1132-1148.

[23] Chao TL, Xu XL, Wu ZJ, Wen SR, Li FM. Quasi-zero stiffness vibration isolators with slender Euler beams as positive stiffness elements. Mech Adv Mater Struc. 2023. In press.

[24] Kim J, Jeon Y, Um S, Park U, Kim KS, Kim S. A novel passive quasizero stiffness isolator for ultra-precision measurement systems. Int J Precis Eng Manuf. 2019;20(9):1573-1580.

[25] Ding BX, Li X, Chen SC, Li YM. Modular quasi-zero-stiffness isolator based on compliant constant-force mechanisms for low-frequency vibration isolation. J Vib Control. 2023. In press.

[26] Xu D, Yu Q, Zhou J, Bishop SR. Theoretical and experimental analyses of a nonlinear magnetic vibration isolator with quasi-zerostiffness characteristic. J Sound Vib. 2013;332(14):3377-3389.

[27] Wu W, Chen X, Shan Y. Analysis and experiment of a vibration isolator using a novel magnetic spring with negative stiffness. J Sound Vib. 2014;333(13):2958-2970.

[28] Jiang Y, Song C, Ma X, Wu H, Mai Z. Dynamics and stability of magnetic-air hybrid quasi-zero stiffness vibration isolation system. Int J Acoust Vib. 2023;28(1):65-75.

[29] Xie YJ, Niu F, Sun JG, Meng LS. Design and analysis of a novel quasizero stiffness isolator under variable loads. Math Probl Eng. 2022;2022:9082752.

[30] Wang MT, Su P, Liu SY, Chai K, Wang BX, Lu JF. Design and analysis of electromagnetic quasi-zero stiffness vibration isolator. J Vib Eng Technol. 2023;11:153-164.

[31] Wu JL, Zeng LZ, Han B, et al. Analysis and design of a novel arrayed magnetic spring with high negative stiffness for low-frequency vibration isolation. Int J Mech Sci. 2022;216:106980.

[32] Wang S, Xin WP, Ning YH, Li B, Hu Y. Design, experiment, and improvement of a quasi-zero-stiffness vibration isolation system. Appl Sci. 2020;10:2273.

[33] Zhou J, Wang K, Xu D, Ouyang H, Fu Y. Vibration isolation in neonatal transport by using a quasi-zero-stiffness isolator. J Vib Control. 2018;24(15):3278-3291.

[34] Wang Q, Zhou JX, Xu DL, Ouyang HJ. Design and experimental investigation of ultra-low frequency vibration isolation during neonatal transport. Mech Syst Signal Process. 2020;139:106633.

[35] Wang Q, Zhou J, Wang K, Xu D, Wen G. Design and experimental study of a compact quasi-zero-stiffness isolator using wave springs. Sci China Technol Sci. 2021;64(10):2255-2271.

[36] Yan G, Wu ZY, Wei XS, et al. Nonlinear compensation method for quasizero stiffness vibration isolation. J Sound Vib. 2022;523:116743.

[37] Yan G, Qi WH, Shi JW, et al. Bionic paw-inspired structure for vibration isolation with novel nonlinear compensation mechanism. J Sound Vib. 2022;523:116743.

[38] Zhao TY, Yan G, Qi WH, Lu JJ, Zhang WM. Magnetically modulated tetrahedral structure for low frequency vibration isolation with adjustable load capacity. Int J Mech Sci. 2023;526:116819.

[39] Lu JJ, Yan G, Qi WH, et al. Sliding-boundary-constrained cantilever structure for vibration isolation via nonlinear stiffness modulation. Int J Mech Sci. 2022;235:107733.

[40] Qi WH, Yan G, Lu JJ, et al. Magnetically modulated sliding structure for low frequency vibration isolation. J Sound Vib. 2022;526:116819.

RIGHTS & PERMISSIONS

2024 2024 The Authors. International Journal of Mechanical System Dynamics published by John Wiley & Sons Australia, Ltd on behalf of Nanjing University of Science and Technology.