NaOH-activated slow-release energy material agents for rock preconditioning: Enhanced expansive pressure and a mechanistic framework

Abstract

With the increasing global demand for critical minerals and low-impact subsurface energy systems, efficient and sustainable rock preconditioning methods are urgently needed. Slow-release energy material agents (SREMAs) are promising next-generation materials for enhancing rock permeability, with potential applications in mineral recovery, geothermal stimulation, and underground hydrogen storage. However, their broader adoption has been limited by suboptimal expansive pressure and a lack of mechanistic understanding. This study addresses both challenges by incorporating sodium hydroxide (NaOH) as an inorganic accelerator to enhance the performance and reveal the underlying expansion mechanism. Seven SREMAs formulations with varying NaOH contents were evaluated using the outer pipe method, and three representative samples were characterized using inductively coupled plasma mass spectrometry, scanning electron microscopy, and X-ray diffraction. The results show that NaOH accelerates hydration reactions and increases 24-h expansive pressure by 15.03% to 52.62%, with a peak performance at 0.15wt% NaOH. NaOH addition promoted the formation of calcium hydroxide and ettringite and optimized the microporous structure of calcium silicate hydrate, the latter playing a critical role in transforming internal expansion into effective outward pressure. A novel mechanistic framework linking mineralogical transformations to enhanced macroscopic performance is proposed. This study provides new insights into sustainable rock preconditioning and offers a foundation for optimizing SREMAs for applications in which low-carbon, high-efficiency subsurface engineering is essential.

Keywords

slow-release energy material agents / thermodynamic equilibrium / mineralogical transformation / expansion mechanism / sustainable subsurface engineering / mineral recovery

References

[1] O. Vidal, H. Le Boulzec, B. Andrieu, and F. Verzier, Modelling the demand and access of mineral resources in a changing world, Sustainability, 14(2022), No. 1, art. No. 11.

[2] Mudd GM, Weng ZH, Jowitt SM. A detailed assessment of global Cu resource trends and endowments. Econ. Geol., 2013, 108(5):1163.

[3] Tian HY, Zhu DQ, Pan J, Yang CC, Huang WQ, Chu MS. Effect mechanism of aluminum occurrence and content on the induration characteristics of iron ore pellets. Int. J. Miner. Metall. Mater., 2023, 30(12):2334.

[4] G. Calvo, G. Mudd, A. Valero, and A. Valero, Decreasing ore grades in global metallic mining: A theoretical issue or a global reality, Resources, 5(2016), No. 4, art. No. 36.

[5] Koppelaar RHEM, Koppelaar H. The ore grade and depth influence on copper energy inputs. Biophys. Econ. Resour. Qual., 2016, 1(2):1.

[6] Mudd GM. Critical review of acid in situ leach uranium mining: 1. USA and Australia. Environ. Geol., 2001, 41(3):390.

[7] Su XL, Li DY, Zhao JJ, Wang MM, Su X, Zhou AH. Numerical simulation of microwave-induced cracking and melting of granite based on mineral microscopic models. Int. J. Miner. Metall. Mater., 2024, 31(7):1512.

[8] Lu GM, Li YH, Hassani F, Zhang XW. The influence of microwave irradiation on thermal properties of main rock-forming minerals. Appl. Therm. Eng., 2017, 112: 1523.

[9] Hui G, Chen ZX, Lei ZD, et al.A synthetical geoengineering approach to evaluate the largest hydraulic fracturing-induced earthquake in the East Shale Basin, Alberta. Pet. Sci., 2023, 20(1):460.

[10] R.V. De Silva, R. Pathegama Gamage, and M.S. Anne Perera, An alternative to conventional rock fragmentation methods using SCDA: A review. Energies, 9(2016), No. 11, art. No. 958.

[11] Zhang W, Yang FL, Cao LC, Chang JY, Zhao SX, Mao JF. Evolution law of static expansion-induced cracking and borehole parameter optimization in coal measure hard rocks. Comput. Part. Mech., 2025, 12(5):3499.

[12] Z. Zhong, Y.H. Cui, P. Tao, C. Gao, R. Lou, and J. Liu, Quantitative assessment and optimized utilization of soundless cracking demolition agent for fragmentations of basalt fiber–reinforced concrete, J. Mater. Civ. Eng., 37(2025), No. 3, art. No. 04025010.

[13] Guo TK, Zhang SC, Ge HK, Wang XQ, Lei X, Xiao B. A new method for evaluation of fracture network formation capacity of rock. Fuel, 2015, 140: 778.

[14] K. Kim, H. Cho, D. Sohn, and J. Lee, The use of expansive chemical agents for concrete demolition: Example of practical design and application, Constr. Build. Mater., 272(2021), art. No. 121849.

[15] Tang W, Zhai C, Xu JZ, Sun Y, Cong YZ, Zheng YF. The influence of borehole arrangement of soundless cracking demolition agents (SCDAs) on weakening the hard rock. Int. J. Min. Sci. Technol., 2021, 31(2):197.

[16] Zeng S, Song JY, Sun B, et al.Seepage characteristics of the leaching solution during in situ leaching of uranium. Nucl. Eng. Technol., 2023, 55(2):566.

[17] Liu LY, Jin J, Liu JD, et al.Mechanical properties of sandstone under in-situ high-temperature and confinement conditions. Int. J. Miner. Metall. Mater., 2025, 32(4):778.

[18] Huynh MP, Laefer DF. Expansive cements and soundless chemical demolition agents: state of technology review. Proceedings of the 11th Conference on Science and Technology, 2009

[19] T. Kannangara and P.G. Ranjith, Revolutionizing mineral recovery: The untapped potential of non-explosive expansive agents for eco-friendly mining, Sustain. Mater. Technol., 43(2025), art. No. e01238.

[20] T. Kannangara, P.G. Ranjith, and V.R.S. De Silva, Eco-friendly rock fracturing: Enhancing SREMA with calcium sulfate for sustainable mineral recovery, Mater. Today Sustain., 31(2025), art. No. 101167.

[21] Zhu XY, Zhai C, Xu JZ, Yu X, Sun Y, Chen ZY. Effects of proportion of anhydrous CaCl₂ on the expansion properties of soundless cracking agents. Energy Fuels2022, 36(14):7507.

[22] X.Y. Zhu, C. Zhai, J.Z. Xu, Y. Sun, Y.F. Zheng, and H.X. Xu, Investigation of hydration mechanism of non-explosive expansion material modified with anhydrous calcium chloride, Adv. Powder Technol., 35(2024), No. 5, art. No. 104433.

[23] X.Y. Zhu, C. Zhai, X. Yu, et al., Effects of anhydrous CaCl₂ on flocculation characteristics, rheological properties and blowout inhibition mechanism of non-explosive expansive cement, Constr. Build. Mater., 456(2024), art. No. 139167.

[24] Ali M, Shams MA, Bheel N, et al.A review on chloride induced corrosion in reinforced concrete structures: Lab and in situ investigation. RSC Adv., 2024, 14(50):37252.

[25] T.J. Huang, K. Zhang, K.G. Kang, and Q. Yuan, The effect of NaOH addition on the physico-chemical phenomena of cement setting acceleration, Constr. Build. Mater., 458(2025), art. No. 139761.

[26] Z. Zheng, J. Yang, H.R. Fu, et al., The coupling impact of Na-OH and NaNO₃ on hydration process, products and Sr²⁺ adsorption ability of the major phases in Portland cement, Constr. Build Mater., 459(2025), art. No. 139813.

[27] Z.Q. Zhang, Y. Shao, L. Huang, X.M. Liu, F.H. Han, and P.Y. Yan, A new hydration kinetic model based on boundary nucleation and growth mechanism with time-dependent growth rate: Application to quantitively characterize the influence of alkali on the early hydration of cement, Constr. Build. Mater., 411(2024), art. No. 134616.

[28] Y.R. Yan, S.Y. Yang, G.D. Miron, et al., Effect of alkali hydroxide on calcium silicate hydrate (C–S–H), Cem. Concr. Res., 151(2022), art. No. 106636.

[29] Ish-Shalom M, Bentur A. Properties of type K expansive cement of pure components III. Hydration of pure expansive component under varying restraining conditions. Cem. Concr. Res., 1975, 5(2):139.

[30] Cohen MD. Modeling of expansive cements. Cem. Concr. Res., 1983, 13(4):519.

[31] Ioannidou KAndreoni W, Yip S. Mesoscale structure and mechanics of C–S–H. Handbook of Materials Modeling, 2020, Cham: Springer International Publishing, 1747.

[32] Richardson IG. The nature of C–S–H in hardened cements. Cem. Concr. Res.1999, 29(8):1131.

[33] De Silva VRS, Ranjith PG, Perera MSA, Wu B, Rathnaweera TD. A modified, hydrophobic soundless cracking demolition agent for non-explosive demolition and fracturing applications. Process. Saf. Environ. Prot., 2018, 119: 1.

[34] De Silva VRS, Ranjith PG, Perera MSA, Wu B, Rathnaweera TD. Investigation of the mechanical, microstructural and mineralogical morphology of soundless cracking demolition agents during the hydration process. Mater. Charact., 2017, 130: 9.

[35] Harada T, Soeda K, Idemitsu T, Watanabe A. Characteristics of expansive pressure of an expansive demolition agent and the development of new pressure transducers. Doboku Gakkai Ronbunshu, 1993, 1993(478):91.

[36] Gholinejad M, Arshadnejad Sh. An experimental approach to determine the hole-pressure under expansion load. J. South Afr. Inst. Min. Metall., 2012, 112(7):631

[37] Vollpracht A, Lothenbach B, Snellings R, Haufe J. The pore solution of blended cements: A review. Mater. Struct., 2016, 49(8):3341.

[38] Gražulis S, Chateigner D, Downs RT, et al.Crystallography Open Database–an open-access collection of crystal structures. J. Appl. Crystallogr., 2009, 42(4):726.

[39] Mesecke K, Warr LN, Malorny W. Structure modeling and quantitative X-ray diffraction of C–(A)–S–H. J. Appl. Crystallogr., 2022, 55(1):133.

[40] Hoffmann C, Armbruster T. Clinotobermorite, Ca₅(Si₃O₈(OH))₂·4(H₂O)Ca₅(Si₆O₁₇)·5(H₂O), a natural C–S–H(I) type cement mineral: Determination of the substructure. Z. Kristallogr., 1997, 212(12):864.

[41] Stumm W, Morgan JJAquatic Chemistry: Chemical Equilibria and Rates in Natural Waters, 1996, New York: Wiley

[42] O.T. Majekodunmi, S. Kilic, and E. Ozdemir, Contributory roles of concentration and pH in CaCO₃ growth inhibition for submicron particles synthesis with additive Ca²⁺, Powder Technol., 437(2024), art. No. 119588.

[43] T. Kawabata, Y. Takeda, M. Hori, K. Kandori, and T. Yaji, Partitioning of sodium into calcium carbonates synthesized at 10–40°C: Influence of organic ligands and temperature, Chem. Geol., 559(2021), art. No. 119904.

[44] Zhao ZM, Yang ZJ, Kang D, et al.Crystal growth of hydrated calcium silicate synthesized from fly ash and lime milk at 100°C. Ceram. Int.2024, 50(24):52770.

[45] Y.T. Gui, Z.M. Jiang, C.Y. Dai, and Q.B. Zhang, Enhanced effect of self-propagating subsequent heating on the expansive pressure on soundless chemical demolition agent, Constr. Build. Mater., 364(2023), art. No. 129866.

[46] Y.L. Wang, J. Yu, J.J. Wang, D. Xiang, H. Gu, and J.H. Cheng, Effects of sodium aluminate and quicklime on the properties of CSA grouting materials, J. Build. Eng., 58(2022), art. No. 105060.

[47] Richardson IG. Tobermorite/jennite- and tobermorite/calcium hydroxide-based models for the structure of C–S–H: Applicability to hardened pastes of tricalcium silicate, β-dicalcium silicate, Portland cement, and blends of Portland cement with blast-furnace slag, metakaolin, or silica fume. Cem. Concr. Res., 2004, 34(9):1733.

[48] X.Y. Shen, P. Feng, Q. Zhang, et al., Toward the formation mechanism of synthetic calcium silicate hydrate (C–S–H)-pH and kinetic considerations, Cem. Concr. Res., 172(2023), art. No. 107248.

Rights & permissions

The Author(s)