Carbon-negative backfill design: Dual functionality of aluminum nanoparticles in strength enhancement and CO₂ fixation

Abstract

The sustainable management of coal-based solid waste and effective CO₂ sequestration are critical challenges for the mining industry. To address this, a novel aluminum nanoparticle-modified CO₂-carbonated backfill (ANCB) material was developed that synergistically enhances mechanical properties with carbon capture functionality. The effects of varying aluminum nanoparticles (Al-NPs) concentrations (0.02wt%–0.1wt%) were investigated on the unconfined compressive strength (UCS), CO₂ adsorption capacity, hydration and carbonation reactions, and microstructural evolution of the ANCB. Results demonstrate that low-dose Al-NPs (0.02wt%–0.06wt%) enhance UCS by up to 73.8%, with early-age strength development accelerated by promoting nucleation and hydration kinetics. Notably, CO₂ adsorption was strongly correlated with this strength gain, with an optimal concentration of 0.06wt% achieving a balanced enhancement of both properties. Microstructural and spectroscopic analyses (scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR)) revealed that Al-NPs promote the formation of a denser calcium aluminosilicate hydrate (C–A–S–H) gel, facilitate CaCO₃ precipitation, and release reactive [Al(OH)₄]⁻ ions that drive pozzolanic reactions. However, excessive Al-NPs led to agglomeration and microstructural heterogeneity, impairing performance. This study establishes the dual role of Al-NPs in advancing the multifunctionality of backfill materials. The ANCB system thus presents a scalable, carbon-negative strategy for underground mining, effectively bridging the gap between waste valorization and in-situ CO₂ sequestration.

Keywords

aluminum nanoparticles / carbonated backfill / calcium aluminosilicate hydrate gel / pozzolanic reaction / microstructure

References

[1] Fang ZY, Liu L, Zhang XY, et al. . Carbonation curing of modified magnesium-coal based solid waste backfill material for CO₂ sequestration. Process Saf. Environ. Prot., 2023, 180778

[2] Wu BQ, Wang XD, Zhu SB, et al. . CO₂ sequestration by wet carbonated magnesium slag with high-content aragonite whiskers for improving cement performance as underground filling material. J. Ind. Eng. Chem., 2024, 140413

[3] B.B. Huo, Q. Zhang, M. Li, and S.H. Xing, Using recycled gangue to capture CO₂ and prepare alkali-activated backfill paste: Adsorption and microevolution mechanisms, Fuel, 358(2024), art. No. 130194.

[4] H.N. Mangi, L.Q. Ma, M.H. Sajib, et al., CO₂ carbonation process of cemented paste backfill material using polycarboxylate ether (PCE) and MgCl₂, Results Eng., 28(2025), art. No. 107742.

[5] Guo Q, Zhang JX, Li M, et al. . Rheological and CO₂ sequestration properties of alkali-activated gangue-based backfill slurry: Effect of temperature. J. Mater. Res. Technol., 2025, 363886

[6] T.Y. Yin, Y. Leng, L. Jin, and R. Yu, Promoting the application of water-quenched manganese slag in high-strength mortar through high pressure-temperature-concentration carbonation curing, Constr. Build. Mater., 445(2024), art. No. 137993.

[7] Ding Y, Li SG, Zhu B, et al. . Research on the feasibility of storage and estimation model of storage capacity of CO₂ in fissures of coal mine old goaf. Int. J. Min. Sci. Technol., 2023, 336675

[8] Zhou HY, Wu Y, Liu CH, Geng HZ, Yao CY. Study on the diffusion and migration law of CO₂ sequestrated in abandoned coal mine goaf. Deep Underground Sci. Eng., 2025, 44530

[9] Z.Y. Zhang, H.M. Zhang, T. Ma, et al., Environmental hazards of coal fires: Fracture-driven radon anomalies and migration, Process Saf. Environ. Prot., 201(2025), art. No. 107592.

[10] K.C. Zhang, Y.C. Xue, D.Y. Liu, J.F. Zhao, M. Sibhat, and Y. Tong, Optimizing chloride and calcium ion extraction from municipal solid waste incineration fly ash from Zhoushan, China: Effects of leaching conditions and industrial applications, ChemEngineering, 9(2025), No. 1, art. No. 6.

[11] Williams JM, Zhang N, Moment AJ. Assessment of ammoniacal leaching agents for metal cation extraction from construction wastes in mineral carbonation. ACS Omega, 2024, 92729776

[12] X. Liu, P. Feng, J. Chen, et al., A critical review on the interaction between calcium silicate hydrate (C–S–H) and different ions, Constr. Build. Mater., 413(2024), art. No. 134931.

[13] M. Ambarita, Y.M. Pusparizkita, W.W. Schmahl, et al., Using selective HCl and H₂SO₄ acids to extract calcium from extracted asphalt waste residues in preparation for subsequent indirect mineral carbonation, Case Stud. Chem. Environ. Eng., 10(2024), art. No. 100998.

[14] K. Ramasenya, B. Oladipo, V.N. Katambwe, et al., Comparative study of direct and indirect aqueous mineral carbonation of construction and demolition waste fines for CO₂ sequestration, J. Environ. Chem. Eng., 13(2025), No. 5, art. No. 117754.

[15] Z. Hussain, J.X. Fu, J.J. Li, and Y. Li, CO₂ injection stirring through slurry to enhance performance of gold tailings based sustainable cement paste backfill, J. Cleaner Prod., 518(2025), art. No. 145950.

[16] D.Z. Wang, K.R. Jin, Y. Zhao, H.W. Zhang, L.C. Meng, and X.M. Zhou, Production of low-carbon composite materials using magnesium slag and coal gasification slag via CO₂ curing, Constr. Build. Mater., 463(2025), art. No. 140003.

[17] Li ZJ, Chen J, Lv ZZ, Tong YC, Ran JY, Qin CL. Evaluation on direct aqueous carbonation of industrial/mining solid wastes for CO₂ mineralization. J. Ind. Eng. Chem., 2023, 122359

[18] Li Y, Fu JX, Jing PY, Wang J, Wang K. Experimental study on the macroscopic and microscopic properties of cement paste backfill after treatment with carbon dioxide carbonize filling slurries during the mixing process. J. Mater. Res. Technol., 2024, 331654

[19] J.P. Zhu, D. Ma, S.H. Liu, X.M. Guan, and S.P. Shah, The influence of nano-SiO₂ on the carbonation properties of low calcium CO₂ sequestration binder and its mechanism, Constr. Build. Mater., 416(2024), art. No. 135124.

[20] W.W. Liu, Y. Gu, Y.K. Li, et al., The role of amino nano silica in enhancing carbon capture and strength development in MgO-substituted MSWI fly ash blended mortars, Constr. Build. Mater, 487(2025), art. No. 142094.

[21] H.M. Zhang, P.C. Wang, Y.J. Wang, et al., Investigate on spontaneous combustion characteristics of lignite stockpiles considering moisture and particle size effects, Energy, 309(2024), art. No. 133193.

[22] J.Q. Zhang, M.D. Xiao, and Y.K. Feng, A review on nanomaterials and polymers modified cementitious materials with high performances, J. Build. Eng., 104(2025), art. No. 112331.

[23] C.Q. Li, Y.P. Cao, G.Y. Li, et al., Modified cementitious materials incorporating Al₂O₃ and SiO₂ nanoparticle reinforcements: An experimental investigation, Case Stud. Constr. Mater., 19(2023), art. No. e02542.

[24] H.S. Yang, Y.J. Che, and M.Y. Shi, Influences of calcium carbonate nanoparticles on the workability and strength of 3D printing cementitious materials containing limestone powder, J. Build. Eng., 44(2021), art. No. 102976.

[25] Q.T. Liu, P. Hosseini, and B. Wang, Improving the performance of SiO₂ nanoparticles in Portland-limestone cementitious systems using silica-limestone composites, Cem. Concr. Compos., 157(2025), art. No. 105961.

[26] J.J. Zhang, Y.Z. Li, and H.B. Tan, Effect of TiO₂/montmorillonite on the photocatalytic and mechanical properties of cementitious materials, Cem. Concr. Compos., 161(2025), art. No. 106098.

[27] Z.H. Wang, M.N. Su, Y. Wang, C. Unluer, and S.N. Li, X-ray computed tomography-based characterisation of graphene nanoplatelets re-agglomeration in hardened cement composites, Cem. Concr. Compos., 158(2025), art. No. 105967.

[28] Ngo I, Ma LQ, Zhai JT, Wang YY. Enhancing fly ash utilization in backfill materials treated with CO₂ carbonation under ambient conditions. Int. J. Min. Sci. Technol., 2023, 333323

[29] Y. Xu, B.M. Wang, and C.C. Fan, Research progress on two-dimensional carbon nanomaterials modified alkali-activated cementitious materials: A review, J. Build. Eng., 92(2024), art. No. 109690.

[30] R.H. Xu, H. Ahn, S. Kim, J.W. Lee, and Y.T. Kang, CO₂ capture enhancement by encapsulation of nanoparticles in metal–organic frameworks suspended in physical absorbents, J. CO₂Util., 69(2023), art. No. 102397.

[31] J.W. Lee, S. Kim, I. Torres Pineda, and Y.T. Kang, Review of nanoabsorbents for capture enhancement of CO₂ and its industrial applications with design criteria, Renewable Sustainable Energy Rev., 138(2021), art. No. 110524.

[32] Marchesini FH, Oliveira RM, Althoff H, de Souza Mendes PR. Irreversible time-dependent rheological behavior of cement slurries: Constitutive model and experiments. J. Rheol., 2019, 632247

[33] Kondratiev A, Ilyushechkin A. Flow behaviour of crystallising coal ash slags: Shear viscosity, non-Newtonian flow and temperature of critical viscosity. Fuel, 2018, 224783

[34] J. Jenima, M. Priya Dharshini, M.L. Ajin, et al., A comprehensive review of titanium dioxide nanoparticles in cementitious composites, Heliyon, 10(2024), No. 20, art. No. e39238.

[35] H. Lu, W.H. Zhao, Y.Y. Fu, et al., Enhancing anti-carbonation properties of oil well cement slurry through nanoparticle and cellulose fiber synergy, Constr. Build. Mater., 450(2024), art. No. 138578.

[36] H. Kemer, R. Bouras, N. Mesboua, M. Sonebi, and O. Kinnane, Shear-thickening behavior of sustainable cement paste—Controlling physical parameters of new sources of supplementary cementitious materials, Constr. Build. Mater., 310(2021), art. No. 125277.

[37] Belem T, Benzaazoua M. Design and application of underground mine paste backfill technology. Geotech. Geol. Eng., 2008, 262147

[38] Zhang QL, Wu H, Feng Y, Wang DL, Su HB, Li XS. Rheological and physicomechanical properties of rod milling sand-based cemented paste backfill modified by sulfonated naphthalene formaldehyde condensate. Int. J. Miner. Metal. Mater., 2023, 302225

[39] Xue ZL, Sun HK, Gan DQ, Yan ZP, Liu ZY. Wall slip behavior of cemented paste backfill slurry during pipeline based on noncontact experimental detection. Int. J. Miner. Metal. Mater., 2023, 3081515

[40] X.T. Chen, T.J. Liu, J.Y. Guo, et al., C–S–H-PCE nanoparticles and anionic surfactants as nucleation agent in cement based materials: Focus on the antagonism, Cem. Concr. Compos., 152(2024), art. No. 105644.

[41] L. Laím, H. Caetano, and A. Santiago, Review: Effects of nanoparticles in cementitious construction materials at ambient and high temperatures, J. Build. Eng., 35(2021), art. No. 102008.

[42] Li H, Jin AB, Chen SJ, Zhao YQ, Ju Y. Paraffin–CaCl₂·6H₂O dosage effects on the strength and heat transfer characteristics of cemented tailings backfill. Int. J. Miner. Metal. Mater., 2024, 31160

[43] X.B. Yang, J. Yang, X. Wang, et al., Effects of curing age and magnesium slag grinding time on mechanical properties and hydration characteristics of magnesium slag-based backfill materials, Case Stud. Constr. Mater., 23(2025), art. No. e05052.

[44] I. Ngo, L.Q. Ma, M.H. Sajib, et al., Examination of the use of binderless zeolite blend as backfill materials to enhance CO₂ adsorption in coal mine working face, Case Stud. Constr. Mater., 21(2024), art. No. e03699.

[45] T.Q. Jiang, X.X. Cao, H.Y. Duan, and K.Q. Shu, Recycling efficiency mechanism of recycled concrete aggregate to improve the CO₂ uptake and anti-leakage properties of CO₂ sequestration functional backfills, Constr. Build. Mater., 458(2025), art. No. 139663.

[46] I. Ngo, L.Q. Ma, Z.Y. Zhao, J.T. Zhai, K.P. Yu, and Y.H. Wu, Sol–gel-stabilized CO₂ foam for enhanced in-situ carbonation in foamed fly ash backfill materials, Geomech. Geophys. Geo-Energy Geo-Resour., 10(2024), art. No. 80.

[47] Kapeluszna E, Kotwica Ł, Różycka A, Gołek Ł. Incorporation of Al in C–A–S–H gels with various Ca/Si and Al/Si ratio: Microstructural and structural characteristics with DTA/TG, XRD, FTIR and TEM analysis. Constr. Build. Mater., 2017, 155643

[48] Wu TH, Gao YT, Ji MW, et al. . Recycling gold mine tailings into eco-friendly backfill material for a coal mine goaf: Performance insights, hydration mechanism, and engineering applications. Process Saf. Environ. Prot., 2025, 19395

[49] John E, Matschei T, Stephan D. Nucleation seeding with calcium silicate hydrate—A review. Cem. Concr. Res., 2018, 11374

[50] D.Z. Sun, W. Zhao, Q. Bai, Y.C. Han, and G.Y. Peng, Performance and mechanism of modified backfill grouting materials prepared from EPB shield fine-grained waste soil for resource utilization, Case Stud. Constr. Mater., 22(2025), art. No. e04799.

[51] Y.F. Wan, W.H. Liu, X.Y. Liu, et al., Fabrication of eco-friendly mine backfill materials using lead smelting-granulated blast furnace slag-based binder and aeolian sand: Heavy metal leaching behavior and performance design, Constr. Build. Mater., 483(2025), art. No. 141655.

[52] F. Heidari-Dalfard, S. Tavasoli, E. Assadpour, R. Miller, and S.M. Jafari, Surface modification of particles/nanoparticles to improve the stability of Pickering emulsions: A critical review, Adv. Colloid Interface Sci., 336(2025), art. No. 103378.

[53] X.Y. Lv, X.M. Li, D.Q. Jia, and Z. Shen, Collaborative optimization for multipath coal-fired power project transition and renewable energy power project portfolio selection considering capacity payment and CCER, Appl. Energy, 381(2025), art. No. 125147.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing