Effects of Mn addition on the plastic deformation mechanisms and thermal conductivities of high-pressure die-cast Mg alloys with ultrahigh Zn contents

Abstract

The effects of adding Mn to the Mg–15.0Zn (wt%) alloy, prepared using high-pressure die casting, on the microstructure, mechanical properties, thermal conductivity, and plastic deformation mechanisms of the alloy were investigated. The results indicated that the Mn addition reduced the grain size of the alloy from 6.82 to 5.22 µm, while slightly coarsening its eutectic phases, improved its casting properties, and eliminated the cracks generated during the casting process. Transmission electron microscopy and quasi-in situ electron backscatter diffraction results suggested that the addition of Mn had activated prismatic and <c + a> slips in the alloy during its tensile deformation. Moreover, mechanical test results showed that the addition of Mn had significantly improved the ultimate tensile strength of the alloy: from 287 MPa for the Mg–15.0Zn (wt%) alloy to 317 MPa for the Mg–15.0Zn–0.3Mn (wt%) alloy. Meanwhile, the thermal conductivity of the alloy increased from 68.9 to 78.6 W·K⁻¹·m⁻¹ following the addition of Mn, which reduced the content of Zn atoms. This study will provide insights into the plastic deformation mechanisms of ultrahigh-Zn die-cast Mg alloys.

Keywords

die-cast Mg alloys / Mn addition / thermal conductivity / mechanical properties / plastic deformation mechanisms

References

[1] Pan HC, Pan FS, Yang RM, et al. Thermal and electrical conductivity of binary magnesium alloys. J. Mater. Sci., 2014, 4983107.

[2] H. Lv, J. Tan, T. Geng, et al., Advances in high-strength and high-thermal conductivity cast magnesium alloys: Strategies for property optimization, J. Alloy. Compd., 1029(2025), art. No. 180843.

[3] Guan K, Li C, Yang ZZ, et al. Hardening effect and precipitation evolution of an isothermal aged Mg–Sm based alloy. J. Magnes. Alloys, 2023, 11124619.

[4] Jo S, Lee GM, Lee JU, Kim YM, Park SH. Effect of characteristics and distribution of Mg₁₇Al₁₂ precipitates on tensile and bending properties of high-Al-containing Mg alloys. J. Magnes. Alloys, 2024, 122779.

[5] Luo YH, Cheng WL, Yu H, et al. Tailoring the microstructural characteristics and enhancing creep properties of as-cast Mg–5Bi–5Sn alloy through Mn addition. J. Magnes. Alloys, 2023, 1193350.

[6] Tang JW, Chen L, Zhao GQ, Zhang CS, Sun L, Yu JQ. Experimental study on tensile deformation behaviors under room and elevated temperatures induced by microstructure inhomogeneity of ZK60 Mg with a longitudinal weld. J. Magnes. Alloys, 2023, 11114338.

[7] You J, Wang C, Shang SL, et al. Ordering in liquid and its heredity impact on phase transformation of Mg–Al–Ca alloys. J. Magnes. Alloys, 2023, 1162006.

[8] H. Lv, G.M. He, J. Tan, et al., Enhanced strength and plasticity of low-cost cast Mg–7.0Zn–5.0Al–0.3Mn alloys via Cu addition, J. Alloy. Compd., 1010(2025), art. No. 178380.

[9] Fan WX, Bai Y, Hao H, Zhang B, Zhang XG, Jiang KX. Al–CeO₂–Mg refiner on grain refinement, cast fluidity and mechanical properties of AZ91 alloy. China Foundry, 2024, 216667.

[10] Lv H, Tan J, Yuan Q, et al. Recent advancements in thermal conductivity of magnesium alloys. J. Magnes. Alloys, 2024, 1251687.

[11] Tang B, Fu JL, Feng JK, Zhong XT, Guo YY, Wang HL. Effect of Zn content on microstructure, mechanical properties and thermal conductivity of extruded Mg–Zn–Ca–Mn alloys. Int. J. Miner. Metall. Mater., 2023, 30122411.

[12] H. Lv, Q. Shang, J. Tan, et al., Breaking the trade-off between mechanical properties and thermal conductivity of magnesium alloys via regulating the partial Gibbs energy of alloying elements, Acta Mater., 289(2025), art. No. 120894.

[13] Y.P. Hu, X. Guo, Y. Qiao, X.Y. Wang, and Q.C. Lin, Preparation of medical Mg–Zn alloys and the effect of different zinc contents on the alloy, J. Mater. Sci., 33(2022), No. 1, art. No. 9.

[14] Yan Y, Cao HW, Kang YJ, et al. Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg–Zn alloys produced by powder metallurgy. J. Alloy. Compd., 2017, 693: 1277.

[15] Zhu GM, Wang LY, Zhou H, et al. Improving ductility of a Mg alloy via non-basal <a> slip induced by Ca addition. Int. J. Plast., 2019, 120: 164.

[16] Zhu GM, Wang LY, Wang J, Wang J, Park JS, Zeng XQ. Highly deformable Mg–Al–Ca alloy with Al2Ca precipitates. Acta Mater., 2020, 200: 236.

[17] J. Rong, W.L. Xiao, Y. Fu, et al., A high performance Mg–Al–Ca alloy processed by high pressure die casting: Microstructure, mechanical properties and thermal conductivity, Mater. Sci. Eng. A, 849(2022), art. No. 143500.

[18] Feng LY, Dong XX, Xia MX, et al. Development of high thermal conductivity, enhanced strength and cost-effective diecast Mg alloy compared with AE44 alloy. J. Mater. Res. Technol., 2023, 22: 2955.

[19] Rong J, Xiao WL, Zhao XQ, et al. High thermal conductivity and high strength magnesium alloy for high pressure die casting ultrathin-walled components. Int. J. Miner. Metall. Mater., 2022, 29188.

[20] Bazhenov VE, Koltygin AV, Sung MC, et al. Development of Mg–Zn–Y–Zr casting magnesium alloy with high thermal conductivity. J. Magnes. Alloys, 2021, 951567.

[21] J. Rong, W.L. Xiao, F. Ye, Y. Fu, X.Q. Zhao, and C.L. Ma, The effects of substitution of yttrium for Ce-rich mischmetal on the mechanical properties and thermal conductivity of Mg–4Al–4Zn–4RE alloy, Mater. Charact., 212(2024), art. No. 113959.

[22] Li HC, Zhu XR, Zhang Y, et al. Microstructure, thermal conductivity and mechanical properties of Mg–Zn–Mn–Y quaternary alloys. JOM, 2020, 7241580.

[23] Li BC, Hou LG, Wu RZ, et al. Microstructure and thermal conductivity of Mg–2Zn–Zr alloy. J. Alloy. Compd., 2017, 722: 772.

[24] He JL, Chen JH, Yan HG, et al. Effects of Zn/Ga ratio on microstructure, mechanical, damping and thermal properties of Mg–Zn–Ga alloy solid solutions. J. Mater. Res., 2022, 37101727.

[25] Zhang YT, Liu W, Chen WP, Li ZQ, Hou H, Zhao YH. Simultaneously improving thermal conductivity, mechanical properties and metal fluidity through Cu alloying in Mg–Zn-based alloys. J. Magnes. Alloys, 2024, 1293823.

[26] Chun YB, Battaini M, Davies CHJ, Hwang SK. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes. Metall. Mater. Trans. A, 2010, 41133473.

[27] Li L, Zhang CC, Lv H, Liu CR, Wen ZZ, Jiang JW. Texture development and tensile properties of Mg–Yb binary alloys during hot extrusion and subsequent annealing. J. Magnes. Alloys, 2022, 101249.

[28] Zhu YZ, Hou DW, Li QZ. Quasi in-situ EBSD analysis of twinning-detwinning and slip behaviors in textured AZ31 magnesium alloy subjected to compressive–tensile loading. J. Magnes. Alloys, 2022, 104956.

[29] C.H. Hou, F.G. Qi, Z.S. Ye, N. Zhao, D.F. Zhang, and X.P. Ouyang, Effects of Mn addition on the microstructure and mechanical properties of Mg–Zn–Sn alloys, Mater. Sci. Eng. A, 774(2020), art. No. 138933.

[30] Zhu TY, Fu PH, Peng LM, Hu XY, Zhu SR, Ding WJ. Effects of Mn addition on the microstructure and mechanical properties of cast Mg–9Al–2Sn (wt.%) alloy. J. Magnes. Alloys, 2014, 2127.

[31] Wang Y, Rong W, Wu YJ, Peng LM, Chen J, Ding WJ. Effects of Mn addition on the microstructures and mechanical properties of the Mg–15Gd–1Zn alloy. J. Alloy. Compd., 2017, 698: 1066.

[32] Fang XY, Yi DQ, Nie JF, Zhang XJ, Wang B, Xiao LR. Effect of Zr, Mn and Sc additions on the grain size of Mg–Gd alloy. J. Alloy. Compd., 2009, 4701–2311.

[33] Qi FG, Zhang DF, Zhang XH, Xu XX. Effects of Mn addition and X-phase on the microstructure and mechanical properties of high-strength Mg–Zn–Y–Mn alloys. Mater. Sci. Eng. A, 2014, 593: 70.

[34] Ying T, Chi H, Zheng MY, Li ZT, Uher C. Low-temperature electrical resistivity and thermal conductivity of binary magnesium alloys. Acta Mater., 2014, 80: 288.

[35] Li SB, Yang XY, Hou JT, Du WB. A review on thermal conductivity of magnesium and its alloys. J. Magnes. Alloys, 2020, 8178.

[36] Pan HC, Pan FS, Wang X, et al. Correlation on the electrical and thermal conductivity for binary Mg–Al and Mg–Zn alloys. Int. J. Thermophys., 2013, 3471336.

[37] X.Y. Yu, Y.L. Zhang, Y.X. Zhang, et al., Effect of dual-scale FeCrSi phase on the strength and conductivity of Cu–2.5Fe–0.3Cr–0.2Si alloy, Mater. Sci. Eng. A, 861(2022), art. No. 144340.

[38] Basinski ZS, Dugdale JS, Howie A. The electrical resistivity of dislocations. Philos. Mag., 1963, 8961989.

Rights & permissions

University of Science and Technology Beijing