Intelligent operations and control strategies for tailings waste treatment: Backfill control and closed-loop water circulation

Abstract

Tailings waste backfill treatment has become a crucial approach for sustainable mining and green mine construction. Conventional backfill involves problems such as unstable operation, reliance on manual equipment, low efficiency, and major safety hazards. Recent advances in intelligence have provided opportunities to advance backfill operations. This paper introduces an intelligent backfill operation and control system. It integrates sensing, decision-making, and execution to achieve efficient, safe, and adaptive backfill management. The system adopts a layered architecture. Onsite sensors collect real-time data. These are subsequently processed by a programmable logic controller (PLC) and integrated into a system. Intelligent operation and control strategies were implemented across three key stages of the backfill process: tailing thickening, slurry mixing and preparation, and pipeline transportation. During the thickening of tailings, mathematical models were established to regulate the solid mass fraction (SMF) of the tailing-feeding slurry and the flow rate of the flocculant dosage. This ensured an optimal SMF in the deep cone thickener and safe control of the rake torque. During slurry mixing and preparation, the backfill control system automatically adjusts the amount of cementitious material added, flow rate of dilution water, and pinch valve operation based on real-time monitoring. This improves the slurry quality and stability. For pipeline transportation, real-time pressure monitoring can rapidly detect obstructions, ruptures, and incompletely filled conditions, and automatically initiate corrective actions to prevent system failures. Additionally, the backfill control system adopts an intelligent water circulation strategy to conduct closed-loop monitoring and distribution of process water. This significantly improves the circulation efficiency and reduces the overall resource consumption.

Keywords

Tailings waste / Backfill mining / Intelligent operations / Control strategies / Water circulation

References

[1] T. Kasap, E. Yilmaz, M. Sari, Physicochemical and microstructural behavior of cemented mine backfill: Effect of pH in dam tailings, J. Environ. Manag. 314 (2022) 115034.

[2] C.C. Qi, A. Fourie, Cemented paste backfill for mineral tailings management: review and future perspectives, Miner. Eng. 144 (2019) 106025.

[3] H.Z. Jiao, W.X. Zhang, Y.X. Yang, X.M. Chen, L.H. Yang, H.M. Shen, Y.Y. Rong, H.W. Zhang, Static mechanical characteristics and mesodamage evolution characteristics of layered backfill under the condition of inclined interface, Constr. Build. Mater. 366 (2023) 130113.

[4] G.L. Guo, H.Z. Li, J.F. Zha, An approach to protect cultivated land from subsidence and mitigate contamination from colliery gangue heaps, Process. Saf. Environ. Prot. 124 (2019) 336-344.

[5] G.L. Xue, E. Yilmaz, W.D. Song, S. Cao, Fiber length effect on strength properties of polypropylene fiber reinforced cemented tailings backfill specimens with different sizes, Constr. Build. Mater. 241 (2020) 118113.

[6] O. Pourret, B. Lange, J. Bonhoure, G. Colinet, S. Decrée, G. Mahy, M. Séleck, M. Shutcha, M.P. Faucon, Assessment of soil metal distribution and environmental impact of mining in Katanga (Democratic Republic of Congo), Appl. Geochem. 64 (2016) 43-55.

[7] L.M. Wang, L. Cheng, S.H. Yin, Z.P. Yan, X.L. Zhang, Multiphase slurry flow regimes and its pipeline transportation of underground backfill in metal mine: mini review, Constr. Build. Mater. 402 (2023) 133014.

[8] T.D. Yıldız, Rehabilitation costs paid by mining enterprises in Turkey: comparison of rehabilitation costs with their shares in mining operation costs and other environmental costs, Resour. Policy 104 (2025) 105593.

[9] A. Saedi, A. Jamshidi-Zanjani, A.K. Darban, A review on different methods of activating tailings to improve their cementitious property as cemented paste and reusability, J. Environ. Manag. 270 (2020) 110881.

[10] C.K. Liu, H.J. Wang, B.L. Xiao, J. Nie, M. Liu, Initial commissioning parameters research of fulltailings backfill system in metal mine: from laboratory tests to industrial operation, Constr. Build. Mater. 472 (2025) 140811.

[11] J.L. Pan, Q.L. Zhang, Y. Feng, D.L. Wang, R.X. Lu, Q. Na, Q.S. Chen, Lowfoamrate expansive cemented paste backfill for facilitating active roofcontact: correlation mechanisms between expansion properties and mechanical properties, J. Build. Eng. 113 (2025) 114063.

[12] S.H. Yin, Y.Q. Hou, X. Chen, M.Z. Zhang, Mechanical, flowing and microstructural properties of cemented sulfur tailings backfill: Effects of fiber lengths and dosage, Constr. Build. Mater. 309 (2021) 125058.

[13] S.H. Yin, Y. Zhou, L.M. Wang, J. Pan, Y.Y. Kou, Setting, bleeding, and hardening strength properties of coarse aggregate backfill slurry, Case Stud. Constr. Mater. 17 (2022) e01667.

[14] F.B. Chen, J.G. Liu, X.W. Zhang, J.X. Wang, H.Z. Jiao, J.X. Yu, Review on the art of roof contacting in cemented waste backfill technology in a metal mine, Minerals 12 (6) (2022) 721.

[15] K. Adach-Pawelus, D. Pawelus, Application of hydraulic backfill for rockburst prevention in the mining field with remnant in the Polish underground copper mines, Energies 14 (13) (2021) 3869.

[16] L.J. Chen, D.Y. Jiao, A design procedure for cemented fill for open stoping operations, Min. Sci. Technol. 12 (3) (1991) 333-343.

[17] Q.L. Zhang, Y.T. Li, Q.S. Chen, Y.K. Liu, Y. Feng, D.L. Wang, Effects of temperatures and pH values on rheological properties of cemented paste backfill, J. Cent. South Univ. 28 (6) (2021) 1707-1723.

[18] E. Yilmaz, T. Belem, M. Benzaazoua, Specimen size effect on strength behavior of cemented paste backfills subjected to different placement conditions, Eng. Geol. 185 (2015) 52-62.

[19] C.K. Liu, H.J. Wang, H. Wang, J.Q. Sun, L.J. Bai, Strength, selfflowing, and multiobjective optimization of cemented paste backfill materials base on RSMDF, J. Wuhan Univ. Technol. Mater. Sci. Ed. 40 (2) (2025) 449-461.

[20] C.K. Liu, H.J. Wang, B.L. Xiao, J. Nie, T. Chen, Insight into the rheological property and flow resistance of cemented paste backfill slurry containing fly ash: influence of multifactor and RSMbased ratio optimization, Powder Technol. 467 (2026) 121563.

[21] L.J. Bai, H.J. Wang, X. Zhang, H. Li, S.X. Yang, Z.G. Tian, Effect of cement content on the static and dynamic liquefaction resistance of fine tailing, Case Stud. Constr. Mater. 20 (2024) e02825.

[22] R.G. Gao, K.P. Zhou, Y.L. Zhou, C. Yang, Research on the fluid characteristics of cemented backfill pipeline transportation of mineral processing tailings, Alex. Eng. J. 59 (6) (2020) 4409-4426.

[23] X. Chen, X.Z. Shi, J. Zhou, X.H. Du, Q.S. Chen, X.Y. Qiu, Effect of overflow tailings properties on cemented paste backfill, J. Environ. Manag. 235 (2019) 133-144.

[24] J.H. Qin, J. Zheng, L. Li, Experimental study of the shrinkage behavior of cemented paste backfill, J. Rock Mech. Geotech. Eng. 13 (3) (2021) 545-554.

[25] M. Wang, L. Liu, L. Chen, X.Y. Zhang, B. Zhang, C.F. Ji, Cold load and storage functional backfill for cooling deep mine, Adv. Civ. Eng. 2018 (1) (2018) 5435214.

[26] M. Wang, F. Zhang, L. Liu, W.Y. Ni, D.Y. Kong, C.Q. Chen, Study on the frozen characteristics of natural spray for the preparation of cold storage functional backfill slurries in cold regions, Therm. Sci. Eng. Prog. 62 (2025) 103630.

[27] Y. Yin, L. Qiao, Q.W. Li, X. Li, J.S. Dong, Mechanical and thermophysical properties of heat and energy storage backfill based on MicroPCMs, J. Build. Eng. 83 (2024) 108451.

[28] Y.X. Chen, D.G. Xiao, J.B. Wei, L.W. Mo, F. Rao, L. Yang, Preparation of copper mine tailingsbased geopolymers as thermal storage functional backfill materials, Environ. Res. 275 (2025) 121383.

[29] B.Y. Li, J.X. Zhang, S. Ali Ghoreishi-Madiseh, M.A. Rodrigues de Brito, X.J. Deng, A.F. Kuyuk, Energy performance of seasonal thermal energy storage in underground backfilled stopes of coal mines, J. Clean. Prod. 275 (2020) 122647.

[30] S.Z. Zou, Y.T. Gao, L. Wang, Y. Zhou, Z.R. Yang, C. Yang, R. Chen, H. Jiang, H. Ma, MicroPCMbased phase change energy storage backfill materials: application potential in geothermal exploitation, Constr. Build. Mater. 492 (2025) 142850.

[31] L. Li, K. Wang, S.Y. Zhang, X.Q. Zhang, K.Y. Yin, Resource utilisation of hazardous aluminium dross and coal gangue for fibrereinforced cemented foam backfill, J. Build. Eng. 91 (2024) 109736.

[32] R.G.W. Vasconcelos, N. Beaudoin, A. Hamilton, N.C. Hyatt, J.L. Provis, C.L. Corkhill, Characterisation of a high pH cement backfill for the geological disposal of nuclear waste: the Nirex Reference vault backfill, Appl. Geochem. 89 (2018) 180-189.

[33] E. Williams, Environmental effects of information and communications technologies, Nature 479 (7373) (2011) 354-358.

[34] T.C. Zong, F.M. Li, Q. Zhang, Z.L. Sun, H.N. Lv, Autonomous process execution control algorithms of solid intelligent backfilling technology: development and numerical testing, Appl. Sci. 13 (21) (2023) 11704.

[35] N. Badakhshan, E. Bakhtavar, K. Shahriar, H. Khosravi, S. Afraei, E. Ben-Awuah, Unmanned mining fleet management: a multiobjective framework integrating deep reinforcement learning and Internet of Things, Expert Syst. Appl. 287 (2025) 128238.

[36] C.C. Qi, X.Y. Yang, G.C. Li, Q.S. Chen, Y.T. Sun, Research status and perspectives of the application of artificial intelligence in mine backfilling, J. China Coal Soc. 46 (2) (2021) 688-700.

[37] Z.L. Yuan, X.R. Li, D. Wu, X.J. Ban, N.Q. Wu, H.N. Dai, H. Wang, Continuoustime prediction of industrial paste thickener system with differential ODENet, IEEE/CAA J. Autom. Sin. 9 (4) (2022) 686-698.

[38] L. Bo, S.Q. Yang, Y. Liu, Y.W. Wang, Z.H. Zhang, Research on the data validity of a coal mine solid backfill working face sensing system based on an improved transformer, Sci. Rep. 13 (2023) 11092.

[39] S.H. Yin, Y.J. Shao, A.X. Wu, H.J. Wang, X.H. Liu, Y. Wang, A systematic review of paste technology in metal mines for cleaner production in China, J. Clean. Prod. 247 (2020) 119590.

[40] A.X. Wu, Y. Wang, Z.E. Ruan, B.L. Xiao, J.D. Wang, L.Q. Wang, Key theory and technology of cemented paste backfill for green mining of metal mines, Green Smart Min. Eng. 1 (1) (2024) 27-39.

[41] P. Novák, R. Šindelář, R. Mordinyi, Integration framework for simulations and SCADA systems, Simul. Model. Pract. Theory 47 (2014) 121-140.

[42] D. Krishnankutty, Z. Li, R. Robucci, N. Banerjee, C. Patel, Instruction sequence identification and disassembly using power supply sidechannel analysis, IEEE Trans. Comput. 69 (11) (2020) 1639-1653.

[43] C.C. Qi, Q.S. Chen, S.S. Kim, Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multiobjective optimization, Miner. Eng. 155 (2020) 106422.

[44] S.C. Du, Y.J. Chang, Y.R. Wang, H.J. Wang, Visual Informationguided PhysicsInformed Neural Network (VIPINN) for predictive forecasting and control of the flocculation sedimentation process, Miner. Eng. 232 (2025) 109504.

[45] S.C. Du, H.J. Wang, Z.C. Sheng, M.X. Hu, Physicsinformed hierarchical reasoning (PIHR): a structured framework for generalizable fault diagnosis in industrial thickeners, Miner. Eng. 234 (2025) 109778.

[46] J.L. Yao, D.P. Qiao, T.Y. Yang, J. Wang, H.Y. Cheng, Intelligent cemented paste backfillstrength design framework: interpretable machine learning and mixproportion optimization, Green Smart Min. Eng. 2 (3) (2025) 233-245.

[47] C.K. Liu, H.J. Wang, A.X. Wu, B.L. Xiao, J. Nie, M. Liu, Evolution laws of underflow concentration and rake torque during initial commissioning of DCT: insight into the impact of highlevel circulation and floc residence time, Constr. Build. Mater. 458 (2025) 139563.

[48] A.X. Wu, Z.E. Ruan, R. Bürger, S.H. Yin, J.D. Wang, Y. Wang, Optimization of flocculation and settling parameters of tailing slurry by response surface methodology, Miner. Eng. 156 (2020) 106488.