Precious metal recycling technology in electronic waste: Progress, challenges, and sustainable development path

Abstract

To address resource waste and environmental pollution from electronic waste (e-waste), this study summarized the recycling technology for precious metals from e-waste based on bibliometrics and knowledge graph methods. The relevant literature from 2014 to 2024 was analyzed, and technological development trends and international cooperation characteristics were outlined. The results indicate that the recycling technology for precious metals from e-waste has evolved from traditional hydrometallurgy to green separation technology, and research on integrated circulation systems has gradually taken shape. China dominates the research in this field, with high-yield authors and institutions primarily situated in the country. International cooperation has continued to strengthen over time. However, technological bottlenecks remain in industrial applications. Future research should focus on biomaterial coupling technology and full lifecycle system optimization to promote the in-depth integration of resource recycling theory and sustainable development goals.

Keywords

Precious metal / Electronic waste / Recycling / Recovering / Green separation technology / Metal extraction / Green biotechnology

References

[1] V. Forti, C.P. Baldé, R. Kuehr, G. Bel, The global E-waste monitor 2020. Quantities, flows and the circular economy potential, United Nations University (UNU)/United Nations Institute for Training and Research (UNITAR) - co-hosted SCYCLE Programme, International Telecommunication Union (ITU) & International Solid Waste Association (ISWA), Bonn/Geneva/Rotterdam, 2020.

[2] F.R. Xiu, Y.Y. Qi, F.S. Zhang, Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment, Waste Manag. 41 (2015) 134-141.

[3] J.P. Harvey, W. Courchesne, M.D. Vo, K. Oishi, C. Robelin, U. Mahue, P. Leclerc, A. Al-Haiek, Greener reactants, renewable energies and environmental impact mitigation strategies in pyrometallurgical processes: a review, MRS Energy Sustain. 9 (2) (2022) 212-247.

[4] P. Mou, W. Layiding, D. Xiang, J.G. Gao, G.H. Duan, A physical process for recycling and reusing waste printed circuit boards, in: IEEE International Symposium on Electronics and the Environment. Conference Record, IEEE, Scottsdale, AZ, USA, 2004, pp. 237-242.

[5] A. Mecucci, K. Scott, Leaching and electrochemical recovery of copper, lead and tin from scrap printed circuit boards, J. Chem. Technol. Biotechnol. 77 (4) (2002) 449-457.

[6] H. Brandl, R. Bosshard, M. Wegmann, Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi, Hydrometallurgy 59 (2-3) (2001) 319-326.

[7] Y. Chen, S. Liang, K.K. Xiao, J.P. Hu, H.J. Hou, B.C. Liu, H.L. Deng, J.K. Yang, A cost-effective strategy for metal recovery from waste printed circuit boards via crushing pretreatment combined with pyrolysis: effects of particle size and pyrolysis temperature, J. Clean. Prod. 280 (2021) 124505.

[8] M.H. Jiang, X. Chen, F.S. Chen, M.J. Wang, X.J. Luo, Y. He, C.J. Wu, L.Y. Zhang, X. Li, X.M. Liao, Z.J. Jiang, Z. Jin, Effective N₂ activation strategies for electrochemical ammonia synthesis , Chem 11 (4) (2025) 102441.

[9] Y. Zhang, S. Hu, C.E. Li, X.H. Yan, Y.Y. Zhang, R.B. Yin, Y.F. Wei, K.Z. Gao, H.L. Gao, Advanced strategies for enhancing electrochemical performance of NiAl LDH electrodes in supercapacitors, Coord. Chem. Rev. 531 (2025) 216497.

[10] C. Liu, Y.D. Li, J.H. Zeng, X.Q. Zhou, Z.X. Sun, W. Luo, Z.Y. Ma, X.G. Wang, Z.K. Zhou, Synergistic recovery of mercury and rare earth elements from waste phosphors by microwave alkali fusion-carbothermal reduction followed by acid leaching, J. Hazard. Mater. 488 (2025) 137473.

[11] M.H. Khoshgoftar Manesh, S. Davadgaran, S.A. Mousavi Rabeti, Experimental study of biological wastewater recovery using microbial fuel cell and application of reliability and machine learning to predict the system behavior, Energy Convers. Manag. 314 (2024) 118658.

[12] S. Saxena, Pyrolysis and beyond: Sustainable valorization of plastic waste, Appl. Energy Combust. Sci. 21 (2025) 100311.

[13] Y. Lu, Z.M. Xu, Precious metals recovery from waste printed circuit boards: a review for current status and perspective, Resour. Conserv. Recycl. 113 (2016) 28-39.

[14] Y.J. Ding, S.G. Zhang, B. Liu, H.D. Zheng, C.C. Chang, C. Ekberg, Recovery of precious metals from electronic waste and spent catalysts: a review, Resour. Conserv. Recycl. 141 (2019) 284-298.

[15] S. Mir, N. Dhawan, A comprehensive review on the recycling of discarded printed circuit boards for resource recovery, Resour. Conserv. Recycl. 178 (2022) 106027.

[16] A.N. Erkmen, R. Ulber, T. Jüstel, M. Altendorfner, Towards sustainable recycling of critical metals from e-waste: bioleaching and phytomining, Resour. Conserv. Recycl. 215 (2025) 108057.

[17] M.J. Wu, Y. Chen, Z.P. Guo, X.R. Wang, H.Y. Zhang, T. Zhang, S.H. Guan, Z.F. Bian, Solar-assisted selective separation and recovery of precious group metals from deactivated air purification catalysts, Sci. Bull. 69 (15) (2024) 2379-2386.

[18] H.D. Wang, S.H. Zhang, B. Li, D.A. Pan, Y.F. Wu, T.Y. Zuo, Recovery of waste printed circuit boards through pyrometallurgical processing: a review, Resour. Conserv. Recycl. 126 (2017) 209-218.

[19] M. Rinne, H. Lappalainen, M. Lundström, Evaluating the possibilities and limitations of the pyrometallurgical recycling of waste Li-ion batteries using simulation and life cycle assessment, Green Chem. 27 (9) (2025) 2522-2537.

[20] H.H. Zhou, G.J. Liu, C.C. Zhou, M. Arif, M. Sun, Y. Chen, Y. Liu, Water-assisted-mechanical activation of copper pyrometallurgical tailings for molybdenum leaching and selective removal of environmentally-hazardous elements, Sep. Purif. Technol. 310 (2023) 123088.

[21] B. Xv, Z.C. Li, G.Z. Zha, D.C. Liu, B. Yang, W.L. Jiang, Recovery of platinum group metals from spent automotive catalysts: review of conventional techniques and vacuum metallurgy, Resour. Conserv. Recycl. 215 (2025) 108103.

[22] V.K. Sharma, S. Jain, V.P. Singh, A comparative analysis of recycling technologies for sustainable extraction of cathodic materials from battery waste: evaluation of energy, economic, and environmental performance, J. Energy Storage 111 (2025) 115407.

[23] T. Hijikata, K. Kionoshita, K. Uozumi, T. Koyama, Development of transport technologies for high-temperature fluid in pyrometallurgical reprocessing, Energy Proced. 39 (2013) 127-140.

[24] D.J.C. Stewart, A.R. Barron, Pyrometallurgical removal of zinc from basic oxygen steelmaking dust-a review of best available technology, Resour. Conserv. Recycl. 157 (2020) 104746.

[25] X.F. He, Y.J. Ding, Z.S. Shi, J. Ren, B.H. Zhao, C.X. Zhang, S.G. Zhang, A comprehensive review on the distribution behaviors of precious metals through pyrometallurgical processes and implications for recycling, Miner. Eng. 219 (2024) 108998.

[26] L. Reinhart, D. Vrucak, R. Woeste, H. Lucas, E. Rombach, B. Friedrich, P. Letmathe, Pyrometallurgical recycling of different lithium-ion battery cell systems: economic and technical analysis, J. Clean. Prod. 416 (2023) 137834.

[27] B. Makuza, Q.H. Tian, X.Y. Guo, K. Chattopadhyay, D.W. Yu, Pyrometallurgical options for recycling spent lithium-ion batteries: a comprehensive review, J. Power Sources 491 (2021) 229622.

[28] C. Pan, Y.F. Shen, Pyrometallurgical recycling of spent lithium-ion batteries from conventional roasting to synergistic pyrolysis with organic wastes, J. Energy Chem. 85 (2023) 547-561.

[29] C. Li, R.L. Zhang, J. Zeng, Q.Y. Lu, C.F. Tang, L.K. Zhou, W. Zhang, H.R. Zhang, Y.Y. Gao, J.F. Chen, J.T. Cao, Removal of arsenic from dusts produced during the pyrometallurgical refining of copper by vacuum carbothermal reduction, Vacuum 188 (2021) 110166.

[30] M.X. Huang, Z.C. Li, Q.M. Wang, X.Y. Guo, W. Li, Antimony and gold substance flows analysis of pyrometallurgical process for antimony-gold concentrates, J. Clean. Prod. 420 (2023) 138385.

[31] J. Wang, Y.Y. Zhang, K.K. Cui, T. Fu, J.J. Gao, S. Hussain, T.S. AlGarni, Pyrometallurgical recovery of zinc and valuable metals from electric arc furnace dust-a review, J. Clean. Prod. 298 (2021) 126788.

[32] H. Dang, Z.D. Chang, X. Wu, S.H. Ma, Y.F. Zhan, N. Li, W.B. Liu, W.J. Li, H.L. Zhou, C.Y. Sun, Na₂SO₄-NaCl binary eutectic salt roasting to enhance extraction of lithium from pyrometallurgical slag of spent lithium-ion batteries , Chin. J. Chem. Eng. 41 (2022) 294-300.

[33] S. Vinardell, D.S. Luo, J. López, J.L. Cortina, Techno-economic evaluation of antimony and bismuth upcycling from pyrometallurgical copper wastes, Sep. Purif. Technol. 345 (2024) 127447.

[34] H.M. Tang, Z.W. Peng, Z.Z. Li, Y.T. Ma, J. Zhang, L. Ye, L.C. Wang, M.J. Rao, G.H. Li, T. Jiang, Recovery of platinum-group metals from spent catalysts by microwave smelting, J. Clean. Prod. 318 (2021) 128266.

[35] J.H. Gu, Y.Y. Nie, Z.Y. Li, K. Yang, L. An, H.Q. Jiang, X.Y. Han, Z.T. Fu, X. Zhao, Efficient bioleaching of Li from waste lithium-iron phosphate batteries by acidophilic bacterial consortium: enrichment condition, Li recovery, and brief carbon footprint analysis, Chem. Eng. J. 509 (2025) 161450.

[36] S. Di Piazza, G. Cecchi, A.M. Cardinale, C. Carbone, M.G. Mariotti, M. Giovine, M. Zotti, Penicillium expansum Link strain for a biometallurgical method to recover REEs from WEEE, Waste Manag. 60 (2017) 596-600.

[37] A. Patel, J. Enman, A. Gulkova, P.I. Guntoro, A. Dutkiewicz, Y. Ghorbani, U. Rova, P. Christakopoulos, L. Matsakas, Integrating biometallurgical recovery of metals with biogenic synthesis of nanoparticles, Chemosphere 263 (2021) 128306.

[38] N. Khetwunchai, S. Akeprathumchai, S. Anusaraporn, S. Krobthong, Y. Yingchutrakul, P. Thiravetyan, Enhanced bioleaching of copper and gold from waste printed circuit boards: Stepwise process, pretreatment strategies, metabolomics analysis, and the role of N8-acetylspermidine, Process. Saf. Environ. Prot. 194 (2025) 289-305.

[39] W.Q. Zhuang, J.P. Fitts, C.M. Ajo-Franklin, S. Maes, L. Alvarez-Cohen, T. Hennebel, Recovery of critical metals using biometallurgy, Curr. Opin. Biotechnol. 33 (2015) 327-335.

[40] S.C. Hu, H.Y. Wang, X.K. Li, W.B. He, J. Ma, Y.J. Xu, Y.P. Xu, W.Y. Ming, Recent advances in bioleaching and biosorption of metals from waste printed circuit boards: a review, J. Environ. Manag. 371 (2024) 123008.

[41] W.X. Liu, J.X. Sun, C.B. Ai, R.Y. Zhang, H.N. Cheng, Z. Chen, H.B. Zhou, Y.G. Wang, Moderate permeability enhanced microbial community turnover and copper extraction during bioleaching of low-grade copper ores, Sci. Total Environ. 954 (2024) 176563.

[42] W.H. Gu, J.F. Bai, B. Dong, X.N. Zhuang, J. Zhao, C.L. Zhang, J.W. Wang, K. Shih, Catalytic effect of graphene in bioleaching copper from waste printed circuit boards by Acidithiobacillus ferrooxidans , Hydrometallurgy 171 (2017) 172-178.

[43] H. Malekian, M. Salehi, D. Biria, Investigation of platinum recovery from a spent refinery catalyst with a hybrid of oxalic acid produced by Aspergillus niger and mineral acids , Waste Manag. 85 (2019) 264-271.

[44] S. Yun, G. Hwang, Iron removal and valuable metal recovery from spent lithium-ion batteries (LIBs) using solvent extraction after bioleaching, J. Ind. Eng. Chem. 144 (2025) 672-678.

[45] T. Naseri, N. Bahaloo-Horeh, S.M. Mousavi, Bacterial leaching as a green approach for typical metals recovery from end-of-life coin cells batteries, J. Clean. Prod. 220 (2019) 483-492.

[46] Z.H. Yuan, Y.Q. Yuan, W.Q. Liu, J.J. Ruan, Y.Y. Li, Y.X. Fan, R.L. Qiu, Heat evolution and energy analysis of cyanide bioproduction by a cyanogenic microorganism with the potential for bioleaching of precious metals, J. Hazard. Mater. 377 (2019) 284-289.

[47] K. Mathivanan, R.Y. Zhang, J.U. Chandirika, T. Mathimani, C. Wang, J.Z. Duan, Bacterial biofilm-based bioleaching: sustainable mitigation and potential management of e-waste pollution, Waste Manag. 193 (2025) 221-236.

[48] J.Y. Kim, J.H. Hwang, T. Lee, Y. Kim, S. Bae, D. Kim, J. Lee, J. Lee, Y.F. Tsang, E.E. Kwon, A review of sustainable metal recovery from e-waste via bioleaching: current status and strategies for improvement, Chem. Eng. J. 516 (2025) 164149.

[49] K. Joshi, S. Magdouli, S.K. Brar, Bioleaching for the recovery of rare earth elements from industrial waste: a sustainable approach, Resour. Conserv. Recycl. 215 (2025) 108129.

[50] J.N. Qi, Y. Feng, J.T. Yu, H.L. Wang, Z.H. Wu, J.H. Zhao, Y. Jiang, J. Liu, Y.X. Li, L.M. Zhou, K. Zhang, J. Chen, Wave-like Cu substrate with gradient {100} texture for anode-free lithium batteries, Energy Storage Mater. 77 (2025) 104176.

[51] Y.B. Dong, N. Mingtana, J.Y. Zan, H. Lin, Recovery of precious metals from waste printed circuit boards though bioleaching route: a review of the recent progress and perspective, J. Environ. Manag. 348 (2023) 119354.

[52] J.W. Wang, H.F. Wang, G.W. Zhang, X.X. Ma, Y.Q. Liu, J. Hao, W.N. Xie, Y.Q. He, A review of research progress on combined pyro-hydrometallurgical technology for spent lithium-ion batteries, Chem. Eng. J. 505 (2025) 159403.

[53] H.Y. Deng, B. Wang, J.Q. Xu, G.Y. Yang, Z.A. Shi, H.C. Zhu, W.Z. He, G.M. Li, A comprehensive review of whole process typical hydrometallurgical technologies for recycling waste lithium-ion batteries, Sep. Purif. Technol. 363 (2025) 132234.

[54] D.S. Premathilake, T.G. Ambaye, A.B. Botelho, Jr, A.T.M. Lima, D.C.R. Espinosa, M. Vaccari, Comparative environmental and economic assessment of emerging hydrometallurgical recycling technologies for Li-ion battery cathodes, Sustain. Prod. Consum. 51 (2024) 327-344.

[55] S.Y. Zhang, K.H. Gu, B.A. Lu, J.W. Han, J. Zhou, Hydrometallurgical processes on recycling of spent lithium-lon battery cathode: Advances and applications in sustainable technologies, Acta Phys. Chim. Sin. 40 (10) (2024) 2309028.

[56] Q.W. Chen, X. Lai, J.J. Chen, Y. Yao, Y. Guo, M.J. Zhai, X.B. Han, L.G. Lu, Y.J. Zheng, Comparative environmental impacts of different hydrometallurgical recycling and remanufacturing technologies of lithium-ion batteries considering multi-recycling-approach and temporal-geographical scenarios in China, Sep. Purif. Technol. 324 (2023) 124642.

[57] S.W. Du, F. Gao, Z.R. Nie, Y. Liu, B.X. Sun, X.Z. Gong, Life cycle assessment of recycled NiCoMn ternary cathode materials prepared by hydrometallurgical technology for power batteries in China, J. Clean. Prod. 340 (2022) 130798.

[58] J.C. Lee, K. Kurniawan, Y.J. Suh, B.D. Pandey, Uses of H₂ and CO₂ gases in hydrometallurgical processes: Potential towards sustainable pretreatment, metal production and carbon neutrality , Hydrometallurgy 234 (2025) 106468.

[59] H.F. Li, Y.F. Chen, Z.W. Cui, Y.S. Su, Z.Q. Liu, X.L. Dong, Z.L. Wang, W. Tang, One-step green hydrometallurgical recycling of spent lithium-ion batteries’ cathode, J. Hazard. Mater. 484 (2025) 136769.

[60] M. Ullah, N.M. Ippolito, L. Spera, F. Vegliò, Treatment of wastewater produced during the hydrometallurgical extraction of silver from in-mold structural electronics, Case Stud. Chem. Environ. Eng. 10 (2024) 100916.

[61] J.P.H. Perez, K. Folens, K. Leus, F. Vanhaecke, P. Van Der Voort, G. Du Laing, Progress in hydrometallurgical technologies to recover critical raw materials and precious metals from low-concentrated streams, Resour. Conserv. Recycl. 142 (2019) 177-188.

[62] T. Hu, T.B. Li, X.C. Liu, Z.J. Wang, L. Lou, S.Q. Jing, X.H. Yan, Y.G. Xiong, J.K. Xiong, X. Ge, Realizing the reusability of leachate for the hydrometallurgical recycling of spent lithium cobalt oxide by dynamically regulating the solubility product, Green Chem. 26 (5) (2024) 2653-2660.

[63] Y.D. Wu, J.H. Xu, S.H. Lin, H.S. Huang, Efficient separation and recovery of barium from barium slag via hydrometallurgical approach: process design, thermodynamics research and mechanism investigation, J. Clean. Prod. 448 (2024) 141525.

[64] A. Karppinen, S. Seisko, L. Nevatalo, B.P. Wilson, K. Yliniemi, M. Lundström, Gold recovery from cyanidation residue by chloride leaching and carbon adsorption-preliminary results from CICL process, Hydrometallurgy 226 (2024) 106304.

[65] W. Yang, Q. Wang, Y.P. Wang, T. Long, S. Deng, Effects of pyrite, quartz and sodium sulfite on roasting of a refractory sulfide concentrate and gold, silver, copper leaching during cyanidation, Hydrometallurgy 226 (2024) 106306.

[66] W.G. Liu, W.C. Li, W.B. Liu, Y.B. Shen, S.J. Zhou, B.Y. Cui, A new strategy for extraction of copper cyanide complex ions from cyanide leach solutions by ionic liquids, J. Mol. Liq. 383 (2023) 122108.

[67] T.D. Chi, J.C. Lee, B.D. Pandey, K. Yoo, J. Jeong, Bioleaching of gold and copper from waste mobile phone PCBs by using a cyanogenic bacterium, Miner. Eng. 24 (11) (2011) 1219-1222.

[68] Z.H. Yuan, J.J. Ruan, Y.Y. Li, R.L. Qiu, A new model for simulating microbial cyanide production and optimizing the medium parameters for recovering precious metals from waste printed circuit boards, J. Hazard. Mater. 353 (2018) 135-141.

[69] G. Senanayake, A review of effects of silver, lead, sulfide and carbonaceous matter on gold cyanidation and mechanistic interpretation, Hydrometallurgy 90 (1) (2008) 46-73.

[70] A. Akcil, C. Erust, C.S. Gahan, M. Ozgun, M. Sahin, A. Tuncuk, Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants-a review, Waste Manag. 45 (2015) 258-271.

[71] M.C. Nolasco, I. Rodríguez, J.E. Vilasó, M.U. Flores, T. Pandiyan, E.J. Gutiérrez, J. Aguilar, M. Reyes, I.A. Reyes, Selective extraction of silver from jarosite residues produced in the zinc hydrometallurgical process using thiourea under acidic conditions: kinetic analysis and leaching optimization, Hydrometallurgy 231 (2025) 106396.

[72] L. Hou, A.L. Valdivieso, Y. Chen, P. Chen, N.Z. Zainiddinovich, C.H. Wu, S.X. Song, F.F. Jia, A highly efficient clean hydrometallurgy process for gold leaching in a Fenton oxidation assisted thiourea system, Sustain. Mater. Technol. 40 (2024) e00975.

[73] J. Kim, H.H. Nwe, C.S. Yoon, Enhanced bioleaching of spent Li-ion batteries using A. ferrooxidans by application of external magnetic field, J. Environ. Manag. 367 (2024) 122012.

[74] M.D. Maluleke, A. Kotsiopoulos, E. Govender-Opitz, S.T.L. Harrison, Bioleaching of printed circuit boards in a two-stage reactor system with enhanced ferric iron regeneration in a re-circulating packed-bed reactor from PCB leaching, Miner. Eng. 218 (2024) 109000.

[75] K. Li, Q. Li, Y. Zhang, X.L. Liu, Y.B. Yang, T. Jiang, Thiourea leaching of gold: Elucidating the mechanism of arsenopyrite catalyzed thiourea oxidation by Fe³⁺ and the beneficial role of oxalate through experimental and density functional theory (DFT) investigations , Miner. Eng. 207 (2024) 108550.

[76] Y. Lin, X.Z. Hu, F.T. Zi, Y.L. Chen, S.L. Chen, X.R. Li, L. Zhao, Y.F. Li, Synergistical thiourea and thiosulfate leaching gold from a gold concentrate calcine with copper-ammonia catalysis, Sep. Purif. Technol. 327 (2023) 124928.

[77] K. Sasaki, I. Suyama, Y. Aoki, K.T. Konadu, C. Cindy, H. Chuaicham, T. Miki, Hirajima, Significance of Fe contents on the surface of the gold ores in gold leaching by thiourea and ethylene thiourea, Miner. Eng. 191 (2023) 107957.

[78] Q.F. Xu, H. Zhang, H.M. Li, G.F. Zhang, Z. Fang, Y.X. Zhang, Thiourea-linked covalent triazine frameworks enable efficient and selective gold recovery from e-waste leachate, Sep. Purif. Technol. 359 (2025) 130506.

[79] T.C. Chen, A. Chung, C.J. Hsu, H.C. Hsi, Selective adsorption/reduction of Au in electronic waste recycling wastewater by self-assembled thiourea-crosslinked reduced graphene oxide framework ball, Sep. Purif. Technol. 353 (2025) 128374.

[80] J. Son, J.I. Han, Y. Hong, C.T. Yavuz, Energy-efficient electrochemical recovery of gold enabled by a thiourea-based electrolyte system, J. Environ. Chem. Eng. 11 (5) (2023) 111120.

[81] A. Behnamfard, M.M. Salarirad, F. Veglio, Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation, Waste Manag. 33 (11) (2013) 2354-2363.

[82] N.M. Ippolito, I. Birloaga, F. Ferella, M. Centofanti, F. Vegliò, Preliminary study on gold recovery from high grade E-waste by thiourea leaching and electrowinning, Minerals 11 (3) (2021) 235.

[83] L. Zhang, X.Y. Guo, Q.H. Tian, D. Li, S.P. Zhong, H. Qin, Improved thiourea leaching of gold with additives from calcine by mechanical activation and its mechanism, Miner. Eng. 178 (2022) 107403.

[84] Y.J. Guo, X. Guo, H.Y. Wu, S.P. Li, G.H. Wang, X.X. Liu, G.Z. Qiu, D.Z. Wang, A novel bio-oxidation and two-step thiourea leaching method applied to a refractory gold concentrate, Hydrometallurgy 171 (2017) 213-221.

[85] X.Y. Yang, M.S. Moats, J.D. Miller, X.M. Wang, X.C. Shi, H. Xu, Thiourea-thiocyanate leaching system for gold, Hydrometallurgy 106 (1-2) (2011) 58-63.

[86] D.M. Cheje Machaca, T.C. de Carvalho, J.A. Soares, Tenório, D.C. Romano Espinosa, Advancements in the extraction of niobium and tantalum: innovative strategies in hydrometallurgical processes, Miner. Eng. 222 (2025) 109125.

[87] J.Y. Li, X.L. Xu, W.Q. Liu, Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones, Waste Manag. 32 (6) (2012) 1209-1212.

[88] C. Martínez-Bussenius, Á. Videla, Iodide-assisted leaching of chalcopyrite concentrate in acidic chloride solution: effect of different parameters on the copper extraction rate, Miner. Eng. 213 (2024) 108752.

[89] L.Z. Pan, X.P. Zhang, S.W. He, G.C. Zhang, W. Xu, Gold leaching from waste mobile phone PCBs in a solution mixture of sodium persulfate and potassium iodide, J. Environ. Chem. Eng. 10 (3) (2022) 107712.

[90] G. Granata, A. Miura, W. Liu, F. Pagnanelli, C. Tokoro, Iodide-assisted leaching of chalcopyrite in acidic ferric sulfate media, Hydrometallurgy 186 (2019) 244-251.

[91] W.Y. Zhou, H.T. Liang, Y.Y. Lu, H. Xu, Y.L. Jiao, Adsorption of gold from waste mobile phones by biochar and activated carbon in gold iodized solution, Waste Manag. 120 (2021) 530-537.

[92] X.L. Yin, R.H. Liu, J. Li, Y.Z. Yang, Triiodide ionic liquids used for selective and sustainable palladium recovery from waste catalysts, Sep. Purif. Technol. 357 (2025) 130072.

[93] S.S. Konyratbekova, A. Baikonurova, G.A. Ussoltseva, C. Erust, A. Akcil, Thermodynamic and kinetic of iodine-iodide leaching in gold hydrometallurgy, Trans. Nonferrous Met. Soc. China 25 (11) (2015) 3774-3783.

[94] A. Patel, R. Dawson, Recovery of platinum group metal value via potassium iodide leaching, Hydrometallurgy 157 (2015) 219-225.

[95] M. Baghalha, The leaching kinetics of an oxide gold ore with iodide/iodine solutions, Hydrometallurgy 113 (2012) 42-50.

[96] D.T. Tran, N.T.T. Tran, M.H. Song, T.P.T. Pham, Y.S. Yun, Thiosulfate-based leaching for eco-friendly urban mining: recent developments and challenges, Sep. Purif. Technol. 359 (2025) 130775.

[97] J.H. Tang, Y. Zhang, F.T. Zi, Z.T. Yang, J.L. Mu, Mechanism of electrochemical oxidation of gold surfaces in a novel cobalt(II)-glycine-thiosulfate leaching system: An electrochemical experiments and DFT study, J. Alloy. Compd. 1010 (2025) 177912.

[98] X.R. Li, S.L. Chen, Z.H. Dai, X.Z. Hu, F.T. Zi, Modulating the carbon chain length of organic phosphine for the selective Au(I) recovery from a copper-ammonia-thiosulfate leaching solution, Chem. Eng. J. 500 (2024) 157025.

[99] L. Hou, A.L. Valdivieso, P. Chen, N.Z. Zainiddinovich, C.H. Wu, S.X. Song, F.F. Jia, Pentetic acid/ammonia cooperatively stabilizes Cu(II) as an efficient oxidant for green thiosulfate leaching of gold, Miner. Eng. 218 (2024) 109043.

[100] Q.Z. Weng, W.Q. Zhan, X. Zhang, S.X. Song, Z.L. Zeng, H.M. Lwin, J.L. Arauz-Lara, F.F. Jia, Electrochemical reduction and recovery of trace gold(I) from environmentally friendly thiosulfate leaching solutions using carbon electrodes, Carbon 232 (2025) 119799.

[101] L. Hou, A.L. Valdivieso, A. Robledo-Cabrera, N.Z. Zainiddinovich, C.H. Wu, S.X. Song, F.F. Jia, Stepwise oxidation of refractory pyrite using persulfate for efficient leaching of gold and silver by an eco-friendly copper (II)-glycine-thiosulfate system, Powder Technol. 448 (2024) 120323.

[102] B. Xu, J.T. Wu, Z.L. Dong, S.G. Zhong, X.G. Liu, T. Jiang, Solution circulation for green and sustainable gold extraction with an integrated low potential thiosulfate leaching-resin adsorption recovery process, Sep. Purif. Technol. 353 (2025) 128535.

[103] G.W. Zhang, L. Hou, P. Chen, Q. Zhang, Y. Chen, N.Z. Zainiddinovich, C.H. Wu, L.V. Alejandro, F.F. Jia, Efficient and stable leaching of gold in a novel ethydiaminedhephen acetic-thiosulfate system, Miner. Eng. 209 (2024) 108639.

[104] S. Jeon, C.B. Tabelin, H. Takahashi, I. Park, M. Ito, N. Hiroyoshi, Interference of coexisting copper and aluminum on the ammonium thiosulfate leaching of gold from printed circuit boards of waste mobile phones, Waste Manag. 81 (2018) 148-156.

[105] F. Pourhossein, S.M. Mousavi, A novel rapid and selective microbially thiosulfate bioleaching of precious metals from discarded telecommunication printed circuited boards (TPCBs), Resour. Conserv. Recycl. 187 (2022) 106599.

[106] S. Gámez, K. Garcés, E. de la Torre, A. Guevara, Precious metals recovery from waste printed circuit boards using thiosulfate leaching and ion exchange resin, Hydrometallurgy 186 (2019) 1-11.

[107] X.M. Zhang, G. Senanayake, A review of ammoniacal thiosulfate leaching of gold: an update useful for further research in non-cyanide gold lixiviants, Miner. Process. Extr. Met. Rev. 37 (6) (2016) 385-411.

[108] B. Xu, W.H. Kong, Q. Li, Y.B. Yang, T. Jiang, X.L. Liu, A review of thiosulfate leaching of gold: focus on thiosulfate consumption and gold recovery from pregnant solution, Metals 7 (6) (2017) 222.

[109] Y. Ou, Y.B. Yang, L. Wang, W. Gao, K. Li, Q. Li, Y. Zhang, Q. Zhong, T. Jiang, Volatile sulfur preparation of green lixiviant thiosulfate: generating mechanism and application in gold extraction, Sep. Purif. Technol. 345 (2024) 127433.

[110] A.M. Popescu, V. Soare, O. Demidenko, J.M. Calderon Moreno, E.I. Neacsu, C. Donath, M. Burada, I. Constantin, V. Constantin, Recovery of silver and gold from electronic waste by electrodeposition in ethaline ionic liquid, Rev. Chim. 71 (1) (2020) 122-132.

[111] T.G. Dong, Y.X. Hua, Q.B. Zhang, D.G. Zhou, Leaching of chalcopyrite with Brønsted acidic ionic liquid, Hydrometallurgy 99 (1-2) (2009) 33-38.

[112] D.J. Zhang, L. Dong, Y.T. Li, Y.F. Wu, Y.X. Ma, B. Yang, Copper leaching from waste printed circuit boards using typical acidic ionic liquids recovery of e-wastes’ surplus value, Waste Manag. 78 (2018) 191-197.

[113] Y. Barrueto, P. Hernández, Y.P. Jiménez, J. Morales, Properties and application of ionic liquids in leaching base/precious metals from e-waste. A review, Hydrometallurgy 212 (2022) 105895.

[114] B. Villemejeanne, S. Legeai, E. Meux, S. Dourdain, H. Mendil-Jakani, E. Billy, Halide based ionic liquid mixture for a sustainable electrochemical recovery of precious metals, J. Environ. Chem. Eng. 10 (1) (2022) 107063.

[115] P. Das, B. Behera, K. Sanjay, N. Devi, Recovery of iron as hematite and separation of trivalent lanthanide ions from spent hard disk magnet leach liquor using [P66614][Cy272] ionic liquid, RSC Adv. 15 (2) (2025) 912-923.

[116] H.B. Trinh, T. Son, S. Kim, J. Lee, T.Le Anh Nguyen, Selective separation of Pt(IV) and Ru(III) from the simulated leach liquor of spent electrocatalyst in fuel cells using ionic liquid, J. Ind. Eng. Chem. 150 (2025) 426-436.

[117] S.S. Behera, P.K. Parhi, Influence of ionic liquid (R4PSCN) for selective separation and recovery of copper from spent CuCr catalyst leach liquor, Hydrometallurgy 228 (2024) 106352.

[118] R. El-Shaheny, M.A. El Hamd, N. El-Enany, S. Alshehri, M. El-Maghrabey, Insights on the utility of ionic liquids for greener recovery of gold and silver from water, wastes, and ores, J. Mol. Liq. 414 (2024) 126034.

[119] K.L. Li, J. Huang, Y.M. Zhang, P.C. Hu, S. Li, S.W. Xiang, Comprehensive extraction of V, Ni and Mo from black shale via selective leaching oxidation process , J. Environ. Chem. Eng. 12 (6) (2024) 114581.

[120] W.J. Ma, S.Z. Li, Q.X. Zhao, Z.Y. Liang, Selective recovery of Li₂CO₃ from single or mixed cathode materials of LIBs using carbonation leaching technology with minor acid , J. Energy Storage 95 (2024) 112432.

[121] J.X. Wu, X.G. Zhang, G.S. Jiang, Z. Tan, D.A. Pan, C.Y. Li, Research on the purification mechanism and high-value utilization of manganese leaching solution from electrolytic manganese anode slime, Sep. Purif. Technol. 360 (2025) 130865.

[122] W.B. de Souza, C.S. Abreu, G.D. Rodrigues, A.B. Mageste, L.R. de Lemos, Selective separation of Cu, Ni and Ag from printed circuit board waste using an environmentally safe technique, J. Environ. Manag. 226 (2018) 76-82.

[123] S.P. Zhong, D.H. Liang, W. Weng, X.P. Chi, W.Z. Zhang, W. Tan, Efficient extraction of Li and Rb from zinnwaldite via thermal activation and acid leaching, Miner. Eng. 216 (2024) 108898.

[124] C.L. Liu, J.X. Yu, J. Hu, J.B. Xu, A. Yu, T.T. Liu, Z.B. Wang, X.B. Luo, C.J. Deng, F. Luo, J.W. He, G.S. Zeng, Ultra-low viscosity betaine hydrochloride-formic acid deep eutectic solvent for leaching critical metals from spent NCM lithium-ion batteries, J. Environ. Chem. Eng. 12 (3) (2024) 112586.

[125] J. Lie, H. Shuwanto, H. Abdullah, F.Edi Soetaredjo, S. Ismadji, C. Julius Wijaya, C. Gunarto, Optimization of intensified leaching and selective recovery of Y and Eu from waste cathode ray tube phosphor, Miner. Eng. 209 (2024) 108620.

[126] K. Harshan, A.P. Rajan, Unveiling the potential of microbial biominers in bioleaching for heavy metal recovery from e-waste-a comprehensive review, J. Hazard. Mater. Adv. 18 (2025) 100691.

[127] H.J. Hong, H. Yu, S. Hong, J.Y. Hwang, S.M. Kim, M.S. Park, H.S. Jeong, Modified tunicate nanocellulose liquid crystalline fiber as closed loop for recycling platinum-group metals, Carbohydr. Polym. 228 (2020) 115424.

[128] W.Y. Liu, W.T. Wang, J.H. Zhou, H.X. Deng, S.S. Tong, Hierarchical V₂O₃ spiny hollow nanosphere for efficient adsorption of precious metal ions in complicated matrices , J. Environ. Sci. 154 (2025) 349-364.

[129] A. Alharbi, A. Shahat, A novel approach for green synthesis of cellulose nanorods as optical sensor support for ultra-detection and recovery of precious metals from electronic wastes, J. Environ. Chem. Eng. 12 (3) (2024) 112564.

[130] J. Van Yken, N.J. Boxall, K.Y. Cheng, A.N. Nikoloski, N. Moheimani, A.H. Kaksonen, Techno-economic analysis of an integrated bio- and hydrometallurgical process for base and precious metal recovery from waste printed circuit boards, Hydrometallurgy 222 (2023) 106193.

[131] S. Karim, Y.P. Ting, Recycling pathways for platinum group metals from spent automotive catalyst: A review on conventional approaches and bio-processes, Resour. Conserv. Recycl. 170 (2021) 105588.

[132] B. Murtaza, R. Arshad, M. Kinza, J.X. Wang, M. Shahid, M. Imran, N.S. Shah, Q. Ali, J. Iqbal, C. Han, Maximizing heavy metal removal and precious metal recovery with innovative biowaste-derived biosorbents and biochar, Process. Saf. Environ. Prot. 194 (2025) 873-891.

[133] D.T. Tran, X.Y. Lin, T.M. Nguyen, M.H. Song, Y.S. Yun, Development of an integrated bio-based cyanide production system for recovery of Au from waste printed circuit boards, Sep. Purif. Technol. 363 (2025) 132332.

[134] K. Alorku, C. Shen, Y.H. Li, Y. Xu, C.G. Wang, Q.Y. Liu, Biomass-derived 2-methyltetrahydrofuran platform: A focus on precious and non-precious metal-based catalysts for the biorefinery, Green Chem. 24 (11) (2022) 4201-4236.

[135] M.L. Firmansyah, I.N. Rizki, I. Amalina, A. Abdul Jalil, N. Ullah, Recovery of precious metals from mobile phone waste: studies on leaching and adsorption by functionalized activated carbon, Results Eng. 22 (2024) 102011.

[136] T. Maruyama, Y. Terashima, S. Takeda, F. Okazaki, M. Goto, Selective adsorption and recovery of precious metal ions using protein-rich biomass as efficient adsorbents, Process. Biochem. 49 (5) (2014) 850-857.

[137] R.G. Weng, G.H. Chen, Y.F. Liu, Y.C. Lv, C.X. Lin, X.X. Ye, M.H. Liu, Adsorption and reduction behavior and mechanism of Au(III) on reductive cellulose-based aerogel, Process. Saf. Environ. Prot. 178 (2023) 204-213.

[138] J.K. Bediako, E. Kudoahor, C.R. Lim, N.S. Affrifah, S. Kim, M.H. Song, E. Repo, Exploring the insights and benefits of biomass-derived sulfuric acid activated carbon for selective recovery of gold from simulated waste streams, Waste Manag. 177 (2024) 135-145.

[139] J.Y. Li, J.X. Wen, Y. Guo, N. An, C.J. Liang, Z.Y. Ge, Bioleaching of gold from waste printed circuit boards by alkali-tolerant Pseudomonas fluorescens, Hydrometallurgy 194 (2020) 105260.

[140] V. Beiki, T. Naseri, S.M. Mousavi, An efficient approach for enhancement of gold and silver bioleaching from spent telecommunication printed circuit boards using cyanogenic bacteria: prevention of biofilm formation, Waste Manag. 171 (2023) 590-598.

[141] G. Natarajan, S.B. Tay, W.S. Yew, Y.P. Ting, Engineered strains enhance gold biorecovery from electronic scrap, Miner. Eng. 75 (2015) 32-37.

[142] S. Rana, P. Mishra, Z.A. Wahid, S. Thakur, D. Pant, L. Singh, Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: a microbiological overview, J. Environ. Sci. 89 (2020) 47-64.