Experimental study on the early compressive strength, fluidity, and microstructure of multisource coal-based solid waste cemented backfill

Abstract

The production of coal-based solid waste (CBSW) from coal mining operations poses a significant threat to the ecological environment in mining regions. This research addresses the proper management of CBSW accumulation by utilizing coal gangue, fly ash, and gasification slag as primary materials for backfill preparation. This study focused on evaluating the early uniaxial compressive strength and fluidity of the backfill while investigating the changing characteristics of early compressive strength, fluidity, and microstructure during the early age of backfill development. Findings showed that the slurry fluidity significantly decreased as the mass concentration increased, whereas factors such as the aggregate–cement mass ratio, fine aggregate content, and fiber content demonstrated no noticeable impact on slurry fluidity. Notably, the early compressive strength of the backfill decreased significantly with an increase in the aggregate–cement mass ratio; however, increases in the mass concentration and fine aggregate content effectively enhanced the early compressive strength of the backfill, serving as key influencing factors. The inclusion of fiber significantly enhanced the early compressive strength of the backfill, with the optimal fiber concentration determined to be ∼0.2wt%. Furthermore, increasing the mass concentration or fine aggregate content alleviated the negative impacts of higher aggregate–cement mass ratios on early compressive strength. However, it must be noted that an elevated fine aggregate content may reduce the reinforcing effects of mass concentration on early compressive strength. This leads to enlarged void structures in the samples, whereas increasing the fine aggregate content reduces the void size and range, thereby improving the early compressive strength of the backfill.

Keywords

Multisource coal-based solid waste / Cemented backfill / Fluidity / Early strength / Microstructure / Failure characteristic

References

[1] W.Q. Lai, Study of the technology of partial-filling to control coal mining subsidence, J. Min. Saf. Eng. 23 (1) (2006) 6-11.

[2] J.X. Zhang, M. Li, A. Taheri, W.Q. Zhang, Z.Y. Wu, W.J. Song, Properties and application of backfill materials in coal mines in China, Minerals 9 (1) (2019) 53.

[3] K. Yang, X.Y. Zhao, X. He, Z. Wei, Basic theory and key technology of multi-source coal-based solid waste for green backfilling, J. China Coal Soc. 47 (12) (2022) 4201-4216.

[4] J.W. Wu, X.W. Deng, F.S. Jiao, B. Lyu, C.J. Fang, Resource utilization status and development trend of bulk solid waste of coal-based ash/slag, Coal Sci. Technol. 52 (6) (2024) 238-252.

[5] S. Kalisz, K. Kibort, J. Mioduska, M. Lieder, A. Małachowska, Waste management in the mining industry of metals ores, coal, oil and natural gas-a review, J. Environ. Manag. 304 (2022) 114239.

[6] H.B. Liu, Z.L. Liu, Recycling utilization patterns of coal mining waste in China, Resour. Conserv. Recycl. 54 (12) (2010) 1331-1340.

[7] K. Yang, Z. Wei, X.Y. Zhao, X. He, J.Q. Zhang, J.S. Ji, Theory and technology of green filling of solid waste in underground mine at coal power base of Yellow River Basin, J. China Coal Soc. 46 (S2) (2021) 925-935.

[8] W. Sun, H.J. Wang, K.P. Hou, Control of waste rock-tailings paste backfill for active mining subsidence areas, J. Clean. Prod. 171 (2018) 567-579.

[9] Q. Zhou, J.H. Liu, A.X. Wu, H.J. Wang, Early-age strength property improvement and stability analysis of unclassified tailing paste backfill materials, Int. J. Miner. Metall. Mater. 27 (9) (2020) 1191-1202.

[10] W.T. Liu, Y.H. Du, L.F. Pang, X.X. Meng, J.J. Shen, Y.Y. Hu, Experiment on mechanical properties of various graded collapse column fills, Coal Geol. Explor. 51 (2) (2023) 220-228.

[11] Y.S. Tang, L.F. Zhang, H.Y. Lu, Study on proportion optimization of coal-based solid wastes filling materials, J. Min. Sci. Technol. 4 (4) (2019) 327-336.

[12] X.Z. Hua, G.F. Chang, X. Liu, K. Yang, D.H. Chen, C. Li, E.Q. Wang, Strength evolution law and acoustic-emission characteristics of multi-source coal-based backfill of solid wastes, Chin. J. Rock Mech. Eng. 41 (8) (2022) 1536-1551.

[13] X.Y. Zhao, K. Yang, X. He, Z. Wei, X. Yu, J.Q. Zhang, Study on proportioning and performance of cemented body from multi-source coal-based solid waste based on RSM-BBD experiment, Mater. Rep. 38 (9) (2024) 153-159.

[14] L.Y. Zhou, X.H. Sun, Z. Liu, D.M. Wang, L. Zhu, Study on preparation, working performance and microstructure of coal mine filling material with large amount of fly ash, J. China Coal Soc. 48 (12) (2023) 4536-4548.

[15] S.H. Yin, J.M. Liu, Y.J. Shao, H.S. Zhang, A. Beilby, Y.Y. Kou, Influence rule of early compressive strength and solidification mechanism of full tailings paste with coarse aggregate, J. Cent. South Univ. Sci. Technol. 51 (2) (2020) 478-488.

[16] J.Q. Zhang, K. Yang, X. He, L.F. Zhang, Z. Wei, X.Y. Zhao, J.J. Fang, Study on mechanical properties and damage characteristics of coal-based solid waste cemented backfill, Constr. Build. Mater. 368 (2023) 130373.

[17] X.F. Zhang, X.D. Zhang, P. Shuai, L.J. Su, G.J. Cai, Mechanical properties and microscopic characteristics of fly ash-slag composite backfill, Geomech. Geophys. Geo-Energy Geo-Resour. 9 (2023) 132.

[18] C.X. Wang, Y. Liu, H. Hu, Y.Y. Li, Y. Lu, Study on filling material ratio and filling effect: taking coarse fly ash and coal gangue as the main filling component, Adv. Civ. Eng. 2019 (1) (2019) 2898019.

[19] X.D. Zhang, J.Z. Li, S. Pang, K.X. Zhu, L.J. Su, J.S. Liu, X.F. Zhang, Mechanical properties and interface microscopic characterisation of fiber-reinforced slag-fly ash geopolymer agglutinated iron tailings filling materials, Mater. Today Commun. 36 (2023) 106650.

[20] K.P. Yu, L.Q. Ma, B.B. Huo, I. Ngo, Y.H. Wu, J.T. Zhai, Study on the fluidity and mechanical properties of multi-source coal-based solid waste (MCSW) filling material, J. Mater. Res. Technol. 28 (2024) 2924-2934.

[21] Q. Leng, Q.L. Chang, Y.T. Sun, B. Zhang, J.Z. Qin, The mechanical properties of gangue paste material for deep mines: an experimental and model study, Materials 15 (17) (2022) 5904.

[22] B. Yin, T.H. Kang, J.T. Kang, Y.J. Chen, Experimental and mechanistic research on enhancing the strength and deformation characteristics of fly-ash-cemented filling materials modified by electrochemical treatment, Energy Fuels 32 (3) (2018) 3614-3626.

[23] O. Nasir, M. Fall, Coupling binder hydration, temperature and compressive strength development of underground cemented paste backfill at early ages, Tunn. Undergr. Space Technol. 25 (1) (2010) 9-20.

[24] J.Q. Zhang, X. He, K. Yang, Z. Wei, X.Y. Zhao, J.J. Fang, Diffusion law of coal gangue slurry and the application of fluidized filling technology of gangue in caving area, Sci. Rep. 13 (1) (2023) 13226.

[25] Q. Sun, X.D. Wei, T.L. Li, L. Zhang, Strengthening behavior of cemented paste backfill using alkali-activated slag binders and bottom ash based on the response surface method, Materials 13 (4) (2020) 855.

[26] Y.Q. Hou, K. Yang, S.H. Yin, X. Yu, L.M. Wang, X.B. Yang, Enhancing the physical properties of cemented ultrafine tailings backfill (CUTB) with fiber and rice husk ash: performance, mechanisms, and optimization, J. Mater. Res. Technol. 29 (2024) 4418-4432.

[27] Q. Sun, S. Tian, Q.W. Sun, B. Li, C. Cai, Y.J. Xia, X. Wei, Q.W. Mu, Preparation and microstructure of fly ash geopolymer paste backfill material, J. Clean. Prod. 225 (2019) 376-390.

[28] N. Zhou, E.B. Du, J.X. Zhang, C.L. Zhu, H.Q. Zhou, Mechanical properties improvement of sand-based cemented backfill body by adding glass fibers of different lengths and ratios, Constr. Build. Mater. 280 (2021) 122408.

[29] Q. Xu, Y.M. Wang, W.C. Zhang, Mechanical performances and microscopic properties of cemented backfilling based on orthogonal experiment, J. Min. Strat. Control Eng. 4 (6) (2022) 90-98.

[30] Y. Li, J.X. Fu, J.G. Yang, J. Wang, Research on slurry flowability and mechanical properties of cemented paste backfill: effects of cement-to-tailings mass ratio and mass concentration, Materials 17 (10) (2024) 2222.

[31] Y.Q. Hou, P. Kong, K. Yang, S.H. Yin, X. Yu, Y.L. Wang, P.F. Kou, Enhancing performance and structural integrity of cemented paste backfill: rheological behavior, strength characteristics, and microstructural dynamics, Case Stud. Constr. Mater. 20 (2024) e03367.

[32] S.H. Yin, Z.P. Yan, X. Chen, L.M. Wang, Effect of fly-ash as fine aggregate on the workability and mechanical properties of cemented paste backfill, Case Stud. Constr. Mater. 16 (2022) e01039.

[33] A. Ren, G.R. Feng, Y.X. Guo, T.Y. Qi, J. Guo, M. Zhang, L.X. Kang, Y.L. Han, P.L. Zhang, Influence on performance of coal mine filling paste with fly ash, China Coal Soc. 39 (12) (2014) 2374-2380.

[34] S.H. Yin, Y. Cao, A.X. Wu, Y.Q. Hou, L.J. Bai, Study on mechanics and flow behavior of glass fiber reinforced cemented sulfur tailings backfill, Mater. Rep. 37 (13) (2023) 246-252.

[35] R.F. Yan, J.M. Liu, S.H. Yin, L. Zou, Y.Y. Kou, P.Q. Zhang, Effect of polypropylene fiber and coarse aggregate on the ductility and fluidity of cemented tailings backfill, J. Cent. South Univ. 29 (2) (2022) 515-527.

[36] D. Zheng, W.D. Song, J.X. Fu, G.L. Xue, J.J. Li, S. Cao, Research on mechanical characteristics, fractal dimension and internal structure of fiber reinforced concrete under uniaxial compression, Constr. Build. Mater. 258 (2020) 120351.

[37] S. Cao, E. Yilmaz, W.D. Song, Fiber type effect on strength, toughness and microstructure of early age cemented tailings backfill, Constr. Build. Mater. 223 (2019) 44-54.

[38] S.H. Yin, Y.Q. Hou, X. Chen, M.Z. Zhang, Mechanical, flowing and microstructural properties of cemented sulfur tailings backfill: effects of fiber lengths and dosage, Constr. Build. Mater. 309 (2021) 125058.

[39] Y.P. He, W.Y. Lv, Z.Y. Fang, L. Ma, C.K. Cong, The basic characteristics of paste backfill materials based on highly active mineral admixtures: part I. preliminary study on flow, mechanics, hydration and microscopic properties, Process. Saf. Environ. Prot. 187 (2024) 1366-1377.

[40] K. Zhao, Z.W. He, J. Yang, Y.J. Yan, X. Yu, Y. Zhou, X.W. Zhang, J.Q. Wang, Investigation of failure mechanism of cement-fiber-tailings matrix composites using digital image correlation and acoustic emission, Constr. Build. Mater. 335 (2022) 127513.

[41] F.W. Zhao, J.H. Hu, T.Y. Liu, T. Zhou, Q.F. Ren, Study of the macro and micro characteristics of and their relationships in cemented backfill based on SEM, Materials 16 (13) (2023) 4772.

[42] Y.F. Hu, K.Q. Li, B. Han, H.Y. Li, J.T. Zhao, Strength development and optimization analysis of mixed aggregate backfill based on RSM-DF, J. Cent. South Univ. Sci. Technol. 53 (2) (2022) 620-630.

[43] X.Y. Zhao, K. Yang, Z. Wei, X. He, R.Y. Chen, Study on the effect of multi-source solid waste on the performance of its backfill slurry, Heliyon 9 (5) (2023) e16251.

[44] Q.L. Li, B.W. Wang, L. Yang, M.C. Kang, Recycling multisource industrial waste residues as green binder for cemented ultrafine tailings backfill: hydration kinetics, mechanical properties, and solidification mechanism, Powder Technol. 441 (2024) 119799.

[45] Y.X. Ke, J. Zeng, K.J. Hu, Y. Shen, S.T. Yu, Y.C. Ma, Triaxial mechanical properties and evolution mechanism of fully cemented unclassified tailings backfill under seepage pressure, Nonferrous Met. Sci. Eng. 15 (3) (2024) 422-431.

[46] H.Y. Cheng, A.X. Wu, Y.M. Wang, H.J. Wang, S.Y. Wang, Fractal characterization and dynamic characteristics of microstructure of fly ash-cement paste, Chin. J. Rock Mech. Eng. 35 (S2) (2016) 4241-4248.