Exploring digital twin systems in mining operations: A review

Abstract

Constant attempts have been made throughout human history to find solutions to complex issues. These attempts resulted in industrial revolutions and the transition from manual labor to machines and new technologies. The latest advancements in artificial intelligence (AI) are revolutionary. The use of these smart technologies in mining can lead to increased profitability, enhanced performance, improved safety, and better adherence to environmental regulations. In this paper, the applications of AI and digital twin systems in mining operations are reviewed, covering various components, including mineral exploration, drilling, blasting, loading, hauling, mineral processing, and environmental issues. Critical data inputs for each component are identified, and relevant tools and methods are discussed. These will facilitate the development of digital twin models with learning, simulation, prediction, and optimization capabilities. This study provides valuable insights into fully integrated digital twin mining systems, which will significantly improve mining efficiency and sustainability. Although innovative technologies, such as the Internet of Things (IoT) and other intelligent tools, are increasingly being used in the mining sector, many mining processes still depend on human oversight to deal with challenges, such as remote operations, geological variability, high investment costs, and a skills gap. There is, therefore, significant potential to enhance the use of sensors and IoT devices to support data collection for more integrated and powerful digital twin systems to drive further innovation and operational improvements across the mining value chain.

Keywords

Artificial intelligence / Digital twin / Optimization / Digital mining / Industry 4.0

References

[1] R.G. Ingalls, Introduction to simulation, in: Proceedings of the 2011 Winter Simulation Conference (WSC), Phoenix, AZ, USA, 2011, pp. 1374-1388.

[2] W.A. Menner, Introduction to modeling and simulation, Johns Hopkins APL Tech. Dig. 16 (1) (1995) 6-17.

[3] K. Cagle, 4 types of simulation models used in data analytics, TechTarget, 2023. https://www.techtarget.com/searchbusinessanalytics/tip/Types-of-simulation-models-used-in-data-analytics (Accessed August 26, 2024).

[4] H. Zhang, Head-mounted display-based intuitive virtual reality training system for the mining industry, Int. J. Min. Sci. Technol. 27 (4) (2017) 717-722.

[5] D.P. Tripathy, Virtual reality and its applications in mining industry, J. Mines Met. Fuels 62 (7) (2014) 184-195.

[6] F. Beneš, O. Kodym, Application of augmented reality in mining industry, in: 14th International Multidisciplinary Scientific GeoConference SGEM 2014, Albena, Bulgaria, 2014, pp. 35-42.

[7] J. Jacobs, R.C.W. Webber-Youngman, E. van Wyk, Potential augmented reality applications in the mining industry, 2016. https://doi.org/10.13140/RG.2.2.27751.44961.

[8] P. Stothard, A. Squelch, R. Stone, E. Van Wyk, Towards sustainable mixed reality simulation for the mining industry, Min. Technol. 128 (4) (2019) 246-254.

[9] S.G. Liu, J.C. Xie, X.W. Wang, H. Meng, Mixed reality collaboration environment improves the efficiency of human-centered industrial system: a case study in the mining industry, Comput. Ind. Eng. 180 (2023) 109257.

[10] A. Mathur, A. Dabas, N. Sharma, Evolution from industry 1.0 to industry 5.0, in: 2022 4th International Conference on Advances in Computing, Communication Control and Networking (ICAC3N), Greater Noida, India, IEEE, 2022, pp. 1390-1394.

[11] S. Bmiet, Industrial revolution-from industry 1.0 to industry 4.0, J. Adv. Comput. Intell. Commun. Technol. 2 (1) (2018) 1-2.

[12] K.A. Demir, G. Döven, B. Sezen, Industry 5.0 and human-robot co-working, Procedia Comput. Sci. 158 (2019) 688-695.

[13] Industry 1.0 To 4.0-brief history of the industrial revolution-sustainability success, 2024. https://www.coursesidekick.com/history/17045272. (Accessed August 26, 2024).

[14] A. Bonner, The Art and Logic of Ramon Llull: A User’s Guide, Brill, Leiden, The Netherlands, 2007.

[15] T.C. Artau, J.C. Artau, A.E. Para el Progreso de las Ciencias, Historia de la Filosofía Española: Filosofía Cristiana de Los Siglos XIII Al XV (History of Spanish Philosophy: Christian Philosophy from the 13th to the 15th Centuries), Real academia de ciencias exactas, físicas y naturales, 1939 (in Spanish).

[16] J. McCarthy, M.L. Minsky, N. Rochester, C.E. Shannon, A proposal for the Dartmouth summer research project on artificial intelligence August 31, 1955, AI Mag. 27 (4) (2006) 12-14.

[17] E.A. Feigenbaum, J. Feldman, Computers and Thought, McGraw-Hill Inc, New York, 1963.

[18] P. Danaee, R. Ghaeini, D.A. Hendrix, A deep learning approach for cancer detection and relevant gene identification, Pac. Symp. Biocomput. Pac. Symp. Biocomput. 22 (2017) 219-229.

[19] A. Hussain, A. Malik, M.U. Halim, A.M. Ali, The use of robotics in surgery: a review, Int. J. Clin. Pract. 68 (11) (2014) 1376-1382.

[20] A. Nait Aicha, G. Englebienne, K.S. van Schooten, M. Pijnappels, B. Kröse, Deep learning to predict falls in older adults based on daily-life trunk accelerometry, Sens. Basel Switz. 18 (5) (2018) E1654.

[21] T. Davenport, R. Kalakota, The potential for artificial intelligence in healthcare, Future Healthc. J. 6 (2) (2019) 94-98.

[22] S.D. Tagliaferri, M. Angelova, X.H. Zhao, P.J. Owen, C.T. Miller, T. Wilkin, D.L. Belavy, Artificial intelligence to improve back pain outcomes and lessons learnt from clinical classification approaches: three systematic reviews, NPJ Digit. Med. 3 (2020) 93.

[23] R.J. Burton, M. Albur, M. Eberl, S.M. Cuff, Using artificial intelligence to reduce diagnostic workload without compromising detection of urinary tract infections, BMC Med. Inform. Decis. Mak. 19 (1) (2019) 171.

[24] S. Chakradhar, Predictable response: finding optimal drugs and doses using artificial intelligence, Nat. Med. 23 (11) (2017) 1244-1247.

[25] Q. Huang, Application of artificial intelligence in mechanical engineering, in: Proceedings of the 2nd International Conference on Computer Engineering, Information Science & Application Technology (ICCIA 2017), Atlantis Press, 2017, pp. 882-887.

[26] S. Nasiri, M.R. Khosravani, K. Weinberg, Fracture mechanics and mechanical fault detection by artificial intelligence methods: a review, Eng. Fail. Anal. 81 (2017) 270-293.

[27] R.N. Liu, B.Y. Yang, E. Zio, X.F. Chen, Artificial intelligence for fault diagnosis of rotating machinery: a review, Mech. Syst. Signal Process. 108 (2018) 33-47.

[28] A. Angelopoulos, E.T. Michailidis, N. Nomikos, P. Trakadas, A. Hatziefremidis, S. Voliotis, T. Zahariadis, Tackling faults in the industry 4.0 Era-a survey of machine-learning solutions and key aspects, Sens. Basel Switz. 20 (1) (2019) E109.

[29] C.W. Chang, H.W. Lee, C.H. Liu, A review of artificial intelligence algorithms used for smart machine tools, Inventions 3 (3) (2018) 41.

[30] M. Bahiraei, S. Heshmatian, H. Moayedi, Artificial intelligence in the field of nanofluids: a review on applications and potential future directions, Powder Technol. 353 (2019) 276-301.

[31] G.J. Ward, B. Bueno, D. Geisler-Moroder, L.O. Grobe, J.C. Jonsson, E.S. Lee, T.N. Wang, H. Rose Wilson, Daylight simulation workflows incorporating measured bidirectional scattering distribution functions, Energy Build. 259 (2022) 111890.

[32] Y.T. Chae, R. Horesh, Y. Hwang, Y.M. Lee, Artificial neural network model for forecasting sub-hourly electricity usage in commercial buildings, Energy Build. 111 (2016) 184-194.

[33] A. Rahman, V. Srikumar, A.D. Smith, Predicting electricity consumption for commercial and residential buildings using deep recurrent neural networks, Appl. Energy 212 (2018) 372-385.

[34] A. Foucquier, S. Robert, F. Suard, L. Stéphan, A. Jay, State of the art in building modelling and energy performances prediction: a review, Renew. Sustain. Energy Rev. 23 (2013) 272-288.

[35] M. Abdallah, M. Abu Talib, S. Feroz, Q. Nasir, H. Abdalla, B. Mahfood, Artificial intelligence applications in solid waste management: a systematic research review, Waste Manag. 109 (2020) 231-246.

[36] A. Patil, L. Patted, M. Tenagi, V. Jahagirdar, M. Patil, R. Gautam, Artificial intelligence as a tool in civil engineering-A review, in: IOSR Journal of Computer Engineering (IOSR-JCE), National Conference on Advances in Computational Biology, Communication, and Data Analytics, 2017, pp. 36-39.

[37] T. Nguyen, A. Kashani, T. Ngo, S. Bordas, Deep neural network with high-order neuron for the prediction of foamed concrete strength, Comput. Aided Civ. Infrastruct. Eng. 34 (4) (2019) 316-332.

[38] J.X. Che, J.Z. Wang, Short-term load forecasting using a kernel-based support vector regression combination model, Appl. Energy 132 (2014) 602-609.

[39] S. Deshmukh, R. Bandyopadhyay, N. Bhattacharyya, R.A. Pandey, A. Jana, Application of electronic nose for industrial odors and gaseous emissions measurement and monitoring-an overview, Talanta 144 (2015) 329-340.

[40] A. Garre, M.C. Ruiz, E. Hontoria, Application of Machine Learning to support production planning of a food industry in the context of waste generation under uncertainty, Oper. Res. Perspect. 7 (2020) 100147.

[41] H. Zareiforoush, S. Minaei, M.R. Alizadeh, A. Banakar, B.H. Samani, Design, development and performance evaluation of an automatic control system for rice whitening machine based on computer vision and fuzzy logic, Comput. Electron. Agric. 124 (2016) 14-22.

[42] F. Mustafa, S. Andreescu, Chemical and biological sensors for food-quality monitoring and smart packaging, Foods Basel Switz. 7 (10) (2018) E168.

[43] C. Giri, S. Thomassey, J. Balkow, X.Y. Zeng, Forecasting new apparel sales using deep learning and nonlinear neural network regression, in: 2019 International Conference on Engineering, Science, and Industrial Applications (ICESI), Tokyo, Japan, IEEE, 2019, pp. 1-6.

[44] C.W.M. Yuen, W.K. Wong, S.Q. Qian, L.K. Chan, E.H.K. Fung, A hybrid model using genetic algorithm and neural network for classifying garment defects, Expert Syst. Appl. 36 (2) (2009) 2037-2047.

[45] T.W. Lau, P.C.L. Hui, F.S.F. Ng, K.C.C. Chan, A new fuzzy approach to improve fashion product development, Comput. Ind. 57 (1) (2006) 82-92.

[46] A.S.M. Sayem, R. Kennon, N. Clarke, 3D CAD systems for the clothing industry, Int. J. Fash. Des. Technol. Educ. 3 (2) (2010) 45-53.

[47] S. Inui, A combined system of computer aided design and genetic algorithm for apparel designing, Sen’i Gakkaishi 52 (11) (1996) 605-611.

[48] M. Jaouadi, S. Msahli, A. Babay, B. Zitouni, Analysis of the modeling methodologies for predicting the sewing thread consumption, Int. J. Cloth. Sci. Technol. 18 (1) (2006) 7-18.

[49] N. Karasekreter, F. Başçiftçi, U. Fidan, A new suggestion for an irrigation schedule with an artificial neural network, J. Exp. Theor. Artif. Intell. 25 (1) (2013) 93-104.

[50] J.R. dela Cruz, R.G. Baldovino, A.A. Bandala, E.P. Dadios, Water usage optimization of Smart Farm Automated Irrigation System using artificial neural network, in: 2017 5th International Conference on Information and Communication Technology (ICoIC7), Melaka, Malaysia, IEEE, 2017, pp. 1-5.

[51] C.L. Chang, K.M. Lin, Smart agricultural machine with a computer vision-based weeding and variable-rate irrigation scheme, Robotics 7 (3) (2018) 38.

[52] G. Arvind, V.G. Athira, H. Haripriya, R.A. Rani, S. Aravind, Automated irrigation with advanced seed germination and pest control, in: 2017 IEEE Technological Innovations in ICT for Agriculture and Rural Development (TIAR), Chennai, India, IEEE, 2017, pp. 64-67.

[53] J. Blasco, N. Aleixos, J.M. Roger, G. Rabatel, E. Moltó, AE-Automation and emerging technologies robotic weed control using machine vision, Biosyst. Eng. 83 (2) (2002) 149-157.

[54] T. Bakker, K. van Asselt, J. Bontsema, J. Müller, G. van Straten, An autonomous weeding robot for organic farming, in: P. Corke, S. Sukkariah (Eds.), Field and Service Robotics. Springer Tracts in Advanced Robotics, 25, Springer, Berlin, Heidelberg, 2006, pp. 579-590.

[55] I. Graham, H. Stott, Predicting bookmaker odds and efficiency for UK football, Appl. Econ. 40 (1) (2008) 99-109.

[56] G. Baio, M. Blangiardo, Bayesian hierarchical model for the prediction of football results, J. Appl. Stat. 37 (2) (2010) 253-264.

[57] V. De Silva, M. Caine, J. Skinner, S. Dogan, A. Kondoz, T. Peter, E. Axtell, M. Birnie, B. Smith, Player tracking data analytics as a tool for physical performance management in football: a case study from Chelsea football club academy, Phys. Basel Switz. 6 (4) (2018) E130.

[58] R. Baboota, H. Kaur, Predictive analysis and modelling football results using machine learning approach for English Premier League, Int. J. Forecast. 35 (2) (2019) 741-755.

[59] G. Angelini, L.De Angelis, PARX model for football match predictions, J. Forecast. 36 (7) (2017) 795-807.

[60] M. Zoveidavianpoor, Fuzzy logic in candidate-well selection for hydraulic fracturing in oil and gas wells: a critical review, Int. J. Phys. Sci. 7 (26) (2012) 4049-4060.

[61] P.R. Filgueiras, N.A. Portela, S.R.C. Silva, E.V.R. Castro, L.M.S.L. Oliveira, J.C.M. Dias, A.C. Neto, W. Romão, R.J. Poppi, Determination of saturates, aromatics, and polars in crude oil by¹³C NMR and support vector regression with variable selection by genetic algorithm , Energy Fuels 30 (3) (2016) 1972-1978.

[62] A. Mariajayaprakash, T. Senthilvelan, R. Gnanadass, Optimization of process parameters through fuzzy logic and genetic algorithm-a case study in a process industry, Appl. Soft Comput. 30 (2015) 94-103.

[63] R. Eslamloueyan, M.H. Khademi, Estimation of thermal conductivity of pure gases by using artificial neural networks, Int. J. Therm. Sci. 48 (6) (2009) 1094-1101.

[64] S. Chen, H. Li, D. Yang, P. Tontiwachwuthikul, Optimal parametric design for water-alternating-gas (wag) process in a CO₂ miscible flooding reservoir , J. Can. Pet. Technol. 49 (10) (2010) 75-82.

[65] A.E. Bakyani, H. Sahebi, M.M. Ghiasi, N. Mirjordavi, F. Esmaeilzadeh, M. Lee, A. Bahadori, Prediction of CO₂-oil molecular diffusion using adaptive neuro-fuzzy inference system and particle swarm optimization technique , Fuel 181 (2016) 178-187.

[66] S.Y. Liao, L.T. Zhou, X. Di, B. Yuan, J.J. Xiong, Large-scale short-term urban taxi demand forecasting using deep learning, in: 2018 23rd Asia and South Pacific Design Automation Conference (ASP-DAC), IEEE, 2018, pp. 428-433.

[67] J.F. Gilmore, N. Abe, Neural network models for traffic control and congestion prediction, I V H S J. 2 (3) (1995) 231-252.

[68] R. More, A. Mugal, S. Rajgure, R.B. Adhao, V.K. Pachghare, Road traffic prediction and congestion control using Artificial Neural Networks, in: 2016 International Conference on Computing, Analytics and Security Trends (CAST), Pune, India, IEEE, 2016, pp. 52-57.

[69] Y.S. Lv, Y.J. Duan, W.W. Kang, Z.X. Li, F.Y. Wang, Traffic flow prediction with big data: a deep learning approach, IEEE Trans. Intell. Transp. Syst. 16 (2) (2015) 865-873.

[70] E. Doğan, A.P. Akgüngör, Forecasting highway casualties under the effect of railway development policy in Turkey using artificial neural networks, Neural Comput. Appl. 22 (5) (2013) 869-877.

[71] M. Jooshaki, A. Nad, S. Michaux, A systematic review on the application of machine learning in exploiting mineralogical data in mining and mineral industry, Minerals 11 (8) (2021) 816.

[72] D. Jung, Y. Choi, Systematic review of machine learning applications in mining: exploration, exploitation, and reclamation, Minerals 11 (2) (2021) 148.

[73] J.P. Rigol-Sanchez, M. Chica-Olmo, F. Abarca-Hernandez, Artificial neural networks as a tool for mineral potential mapping with GIS, Int. J. Remote. Sens. 24 (5) (2003) 1151-1156.

[74] H. Setyadi, L.E. Widodo, S. Notosiswoyo, P. Saptawati, A. Ismanto, I. Hardjana, GIS modeling using fuzzy logic approach in mineral prospecting based on geophysical data, in: AIP Conference Proceedings, Bandung, Indonesia, AIP Publishing, 2016.

[75] D. Harris, G.C. Pan, Mineral favorability mapping: a comparison of artificial neural networks, logistic regression, and discriminant analysis, Nat. Resour. Res. 8 (2) (1999) 93-109.

[76] W.M. Brown, T.D. Gedeon, D.I. Groves, R.G. Barnes, Artificial neural networks: a new method for mineral prospectivity mapping, Aust. J. Earth Sci. 47 (4) (2000) 757-770.

[77] V. Rodriguez-Galiano, M. Sanchez-Castillo, M. Chica-Olmo, M. Chica-Rivas, Machine learning predictive models for mineral prospectivity: an evaluation of neural networks, random forest, regression trees and support vector machines, Ore Geol. Rev. 71 (2015) 804-818.

[78] T. Sun, F. Chen, L.X. Zhong, W.M. Liu, Y. Wang, GIS-based mineral prospectivity mapping using machine learning methods: a case study from Tongling ore district, Eastern China, Ore Geol. Rev. 109 (2019) 26-49.

[79] Y.H. Xiong, R.G. Zuo, E.J.M. Carranza, Mapping mineral prospectivity through big data analytics and a deep learning algorithm, Ore Geol. Rev. 102 (2018) 811-817.

[80] I.C.C. Acosta, M. Khodadadzadeh, L. Tusa, P. Ghamisi, R. Gloaguen, A machine learning framework for drill-core mineral mapping using hyperspectral and high-resolution mineralogical data fusion, IEEE J. Sel. Top. Appl. Earth Obs. Remote. Sens. 12 (12) (2019) 4829-4842.

[81] A. Rahman, M.S. Shahriar, G. Timms, C. Lindley, A.B. Davie, D. Biggins, A. Hellicar, C. Sennersten, G. Smith, M. Coombe, A machine learning approach to find association between imaging features and XRF signatures of rocks in underground mines, in: 2015 IEEE SENSORS, IEEE, 2015, pp. 1-4.

[82] S.B. Hood, M.J. Cracknell, M.F. Gazley, Linking protolith rocks to altered equivalents by combining unsupervised and supervised machine learning, J. Geochem. Explor. 186 (2018) 270-280.

[83] J.F. Díez-Pastor, S.E. Jorge-Villar, Á. Arnaiz-González, C.I. García-Osorio, Y. Díaz-Acha, M. Campeny, J. Bosch, J.C. Melgarejo, Machine learning algorithms applied to Raman spectra for the identification of variscite originating from the mining complex of Gavà, J. Raman Spectrosc. 51 (9) (2020) 1563-1574.

[84] U.E. Kaplan, E. Topal, A new ore grade estimation using combine machine learning algorithms, Minerals 10 (10) (2020) 847.

[85] S. Chauhan, W. Rühaak, F. Khan, F. Enzmann, P. Mielke, M. Kersten, I. Sass, Processing of rock core microtomography images: using seven different machine learning algorithms, Comput. Geosci. 86 (2016) 120-128.

[86] N. Okada, Y. Maekawa, N. Owada, K. Haga, A. Shibayama, Y. Kawamura, Automated identification of mineral types and grain size using hyperspectral imaging and deep learning for mineral processing, Minerals 10 (9) (2020) 809.

[87] A.H. Bangian, M. Ataei, A. Sayadi, A. Gholinejad, Fuzzy analytical hierarchy processing to define optimum post mining land use for pit area to clarify reclamation costs, Gospod. Surowcami Miner. -Min. Resour. Manag. (2011) 145-168.

[88] A. Alipour, A.A. Khodaiari, A. Jafari, R. Tavakkoli-Moghaddam, Production scheduling of open-pit mines using genetic algorithm: a case study, Int. J. Manag. Sci. Eng. Manag. 15 (3) (2020) 176-183.

[89] R. Chicoisne, D. Espinoza, M. Goycoolea, E. Moreno, E. Rubio, A new algorithm for the open-pit mine production scheduling problem, Oper. Res. 60 (3) (2012) 517-528.

[90] E. Jélvez, N. Morales, H. Askari-Nasab, A new model for automated pushback selection, Comput. Oper. Res. 115 (2020) 104456.

[91] E. Jélvez, N. Morales, P. Nancel-Penard, F. Cornillier, A new hybrid heuristic algorithm for the precedence constrained production scheduling problem: a mining application, Omega 94 (2020) 102046.

[92] H.Q. Guo, H. Nguyen, D.A. Vu, X.N. Bui, Forecasting mining capital cost for open-pit mining projects based on artificial neural network approach, Resour. Policy 74 (2021) 101474.

[93] H. Nourali, M. Osanloo, A regression-tree-based model for mining capital cost estimation, Int. J. Min. Reclam. Environ. 34 (2) (2020) 88-100.

[94] C. Paduraru, R. Dimitrakopoulos, Responding to new information in a mining complex: fast mechanisms using machine learning, Min. Technol. 128 (3) (2019) 129-142.

[95] A. Aghajani Bazzazi, M. Osanloo, B. Karimi, A new fuzzy multi criteria decision making model for open pit mines equipment selection, Asia Pac. J. Oper. Res. 28 (3) (2011) 279-300.

[96] C.E.A. Ortiz, A. Curi, P.H. Campos, The use of simulation in fleet selection and equipment sizing in mining, in: C. Drebenstedt, R. Singhal (Eds.), Mine Planning and Equipment Selection, Springer, 2014, pp. 869-877.

[97] P. Nobahar, Y. Pourrahimian, F. Mollaei Koshki, Optimum fleet selection using machine learning algorithms-Case study: Zenouz Kaolin Mine, Mining 2 (3) (2022) 528-541.

[98] R.S. Faradonbeh, D.J. Armaghani, M. Monjezi, E.T. Mohamad, Genetic programming and gene expression programming for flyrock assessment due to mine blasting, Int. J. Rock Mech. Min. Sci. 88 (2016) 254-264.

[99] M. Monjezi, M. Rezaei, A. Yazdian, Prediction of backbreak in open-pit blasting using fuzzy set theory, Expert Syst. Appl. 37 (3) (2010) 2637-2643.

[100] S. Shams, M. Monjezi, V.J. Majd, D.J. Armaghani, Application of fuzzy inference system for prediction of rock fragmentation induced by blasting, Arab. J. Geosci. 8 (12) (2015) 10819-10832.

[101] E. Ghasemi, H. Amini, M. Ataei, R. Khalokakaei, Application of artificial intelligence techniques for predicting the flyrock distance caused by blasting operation, Arab. J. Geosci. 7 (1) (2014) 193-202.

[102] M. Hasanipanah, H. Bakhshandeh Amnieh, Developing a new uncertain rule-based fuzzy approach for evaluating the blast-induced backbreak, Eng. Comput. 37 (3) (2021) 1879-1893.

[103] M. Amiri, H. Bakhshandeh Amnieh, M. Hasanipanah, L. Mohammad Khanli, A new combination of artificial neural network and K-nearest neighbors models to predict blast-induced ground vibration and air-overpressure, Eng. Comput. 32 (4) (2016) 631-644.

[104] H. Nguyen, X.N. Bui, H.B. Bui, D.T. Cuong, Developing an XGBoost model to predict blast-induced peak particle velocity in an open-pit mine: a case study, Acta Geophys. 67 (2) (2019) 477-490.

[105] H. Nguyen, X.N. Bui, Y. Choi, C.W. Lee, D.J. Armaghani, A novel combination of whale optimization algorithm and support vector machine with different kernel functions for prediction of blasting-induced fly-rock in quarry mines, Nat. Resour. Res. 30 (1) (2021) 191-207.

[106] A. Sayadi, M. Monjezi, N. Talebi, M. Khandelwal, A comparative study on the application of various artificial neural networks to simultaneous prediction of rock fragmentation and backbreak, J. Rock. Mech. Geotech. Eng. 5 (4) (2013) 318-324.

[107] A. Bahrami, M. Monjezi, K. Goshtasbi, A. Ghazvinian, Prediction of rock fragmentation due to blasting using artificial neural network, Eng. Comput. 27 (2) (2011) 177-181.

[108] P. Nobahar, R. Shirani Faradonbeh, S.N. Almasi, R. Bastami, Advanced AI-powered solutions for predicting blast-induced flyrock, backbreak, and rock fragmentation, Min. Metall. Explor. 41 (2024) 2099-2118.

[109] S. Park, Y. Choi, H.S. Park, Optimization of truck-loader haulage systems in an underground mine using simulation methods, Geosyst. Eng. 19 (5) (2016) 222-231.

[110] A. Moradi Afrapoli, M. Tabesh, H. Askari-Nasab, A multiple objective transportation problem approach to dynamic truck dispatching in surface mines, Eur. J. Oper. Res. 276 (1) (2019) 331-342.

[111] J.P. de Carvalho, R. Dimitrakopoulos, Integrating production planning with truck-dispatching decisions through reinforcement learning while managing uncertainty, Minerals 11 (6) (2021) 587.

[112] D. Ali, M.B. Hayat, L. Alagha, O.K. Molatlhegi, An evaluation of machine learning and artificial intelligence models for predicting the flotation behavior of fine high-ash coal, Adv. Powder Technol. 29 (12) (2018) 3493-3506.

[113] A. Jahedsaravani, M.H. Marhaban, M. Massinaei, Application of statistical and intelligent techniques for modeling of metallurgical performance of a batch flotation process, Chem. Eng. Commun. 203 (2) (2016) 151-160.

[114] F. Nakhaei, M.R. Mosavi, A. Sam, Y. Vaghei, Recovery and grade accurate prediction of pilot plant flotation column concentrate: neural network and statistical techniques, Int. J. Miner. Process. 110 (2012) 140-154.

[115] F. Ahmadzadeh, J. Lundberg, Remaining useful life prediction of grinding mill liners using an artificial neural network, Miner. Eng. 53 (2013) 1-8.

[116] M. Massinaei, R. Doostmohammadi, Modeling of bubble surface area flux in an industrial rougher column using artificial neural network and statistical techniques, Miner. Eng. 23 (2) (2010) 83-90.

[117] M. Karimi, A. Dehghani, A. Nezamalhosseini, S.H. Talebi, Prediction of hydrocyclone performance using artificial neural networks, J. South. Afr. Inst. Min. Met. 110 (5) (2010) 207-212.

[118] G. Bonifazi, S. Serranti, F. Volpe, R. Zuco, Characterisation of flotation froth colour and structure by machine vision, Comput. Geosci. 27 (9) (2001) 1111-1117.

[119] D.K. Nayak, D.P. Das, S.K. Behera, S.P. Das, Monitoring the fill level of a ball mill using vibration sensing and artificial neural network, Neural Comput. Appl. 32 (5) (2020) 1501-1511.

[120] Z.C. Horn, L. Auret, J.T. McCoy, C. Aldrich, B.M. Herbst, Performance of convolutional neural networks for feature extraction in froth flotation sensing, IFAC-PapersOnLine 50 (2) (2017) 13-18.

[121] Y.Y. Pu, A. Szmigiel, J. Chen, D.B. Apel, FlotationNet: a hierarchical deep learning network for froth flotation recovery prediction, Powder Technol. 375 (2020) 317-326.

[122] Y.Y. Pu, A. Szmigiel, D.B. Apel, Purities prediction in a manufacturing froth flotation plant: the deep learning techniques, Neural Comput. Appl. 32 (17) (2020) 13639-13649.

[123] R. Cook, K.C. Monyake, M.B. Hayat, A. Kumar, L. Alagha, Prediction of flotation efficiency of metal sulfides using an original hybrid machine learning model, Eng. Rep. 2 (6) (2020) e12167.

[124] D.J. Armaghani, E. Tonnizam Mohamad, E. Momeni, M. Monjezi, M. Sundaram Narayanasamy, Prediction of the strength and elasticity modulus of granite through an expert artificial neural network, Arab. J. Geosci. 9 (1) (2015) 48.

[125] R. Shirani Faradonbeh, A. Taheri, M. Karakus, Fatigue failure characteristics of sandstone under different confining pressures, Rock Mech. Rock Eng. 55 (3) (2022) 1227-1252.

[126] A. Majdi, M. Beiki, Evolving neural network using a genetic algorithm for predicting the deformation modulus of rock masses, Int. J. Rock Mech. Min. Sci. 47 (2) (2010) 246-253.

[127] S. Mahdevari, K. Shahriar, M. Sharifzadeh, D.D. Tannant, Stability prediction of gate roadways in longwall mining using artificial neural networks, Neural Comput. Appl. 28 (11) (2017) 3537-3555.

[128] X.H. Xue, M. Xiao, Deformation evaluation on surrounding rocks of underground caverns based on PSO-LSSVM, Tunn. Undergr. Space Technol. 69 (2017) 171-181.

[129] X.N. Bui, H. Nguyen, Y. Choi, T. Nguyen-Thoi, J. Zhou, J. Dou, Prediction of slope failure in open-pit mines using a novel hybrid artificial intelligence model based on decision tree and evolution algorithm, Sci. Rep. 10 (2020) 9939.

[130] A. Baghbani, H. Abuel-Naga, R. Shirani Faradonbeh, S. Costa, R. Almasoudi, Ultrasonic characterization of compacted salty kaolin-sand mixtures under nearly zero vertical stress using experimental study and machine learning, Geotech. Geol. Eng. 41 (5) (2023) 2987-3012.

[131] C.C. Qi, Q.S. Chen, X.J. Dong, Q.L. Zhang, Z.M. Yaseen, Pressure drops of fresh cemented paste backfills through coupled test loop experiments and machine learning techniques, Powder Technol. 361 (2020) 748-758.

[132] X. Lu, W. Zhou, X.H. Ding, X.Y. Shi, B.Y. Luan, M. Li, Ensemble learning regression for estimating unconfined compressive strength of cemented paste backfill, IEEE Access 7 (2019) 72125-72133.

[133] E. Isleyen, S. Duzgun, R. McKell Carter, Interpretable deep learning for roof fall hazard detection in underground mines, J. Rock. Mech. Geotech. Eng. 13 (6) (2021) 1246-1255.

[134] A. Badri, S. Nadeau, A. Gbodossou, A new practical approach to risk management for underground mining project in Quebec, J. Loss Prev. Process. Ind. 26 (6) (2013) 1145-1158.

[135] A.E. Maxwell, T.A. Warner, Differentiating mine-reclaimed grasslands from spectrally similar land cover using terrain variables and object-based machine learning classification, Int. J. Remote. Sens. 36 (17) (2015) 4384-4410.

[136] J. Mukherjee, J. Mukherjee, D. Chakravarty, S. Aikat, A novel index to detect opencast coal mine areas from landsat 8 OLI/TIRS, IEEE J. Sel. Top. Appl. Earth Obs. Remote. Sens. 12 (3) (2019) 891-897.

[137] X. Luo, F. Lin, S. Zhu, S. Zhu, M. Yu, Z. Zhang, L. Meng, J. Peng, Mine landslide susceptibility assessment using IVM, ANN and SVM models considering the contribution of affecting factors, PLoS One 14 (4) (2019) e0215134.

[138] D. Tien Bui, H. Shahabi, A. Shirzadi, K. Chapi, B. Pradhan, W. Chen, K. Khosravi, M. Panahi, B. Bin Ahmad, L. Saro, Land subsidence susceptibility mapping in South Korea using machine learning algorithms, Sens. Basel 18 (8) (2018) E2464.

[139] F. Tao, H. Zhang, A. Liu, A.Y.C. Nee, Digital twin in industry: state-of-the-art, IEEE Trans. Ind. Inform. 15 (4) (2019) 2405-2415.

[140] A. Fuller, Z. Fan, C. Day, C. Barlow, Digital twin: enabling technologies, challenges and open research, IEEE Access 8 (2020) 108952-108971.

[141] M. Grieves, J. Vickers, Digital twin: Mitigating unpredictable, undesirable emergent behavior in complex systems, in: J. Kahlen, S. Flumerfelt, A. Alves (Eds.), Transdisciplinary Perspectives on Complex Systems, Springer, Cham, 2016, pp. 85-113.

[142] W. Kritzinger, M. Karner, G. Traar, J. Henjes, W. Sihn, Digital Twin in manufacturing: a categorical literature review and classification, IFAC-Pap. 51 (11) (2018) 1016-1022.

[143] M. Pouresmaieli, M. Ataei, A. Taran, Future mining based on Internet of Things (IoT) and sustainability challenges, Int. J. Sustain. Dev. World Ecol. 30 (2) (2023) 211-228.

[144] M.W. Grieves, Product lifecycle management: the new paradigm for enterprises, Int. J. Prod. Dev. 2 (1/2) (2005) 71.

[145] E.J. Tuegel, A.R. Ingraffea, T.G. Eason, S.M. Spottswood, Reengineering aircraft structural life prediction using a digital twin, Int. J. Aerosp. Eng. 2011 (2011) 154798.

[146] Z.H. Lv, S.X. Xie, Artificial intelligence in the digital twins: state of the art, challenges, and future research topics, Digit. Twin 1 (2021) 12.

[147] D.M. Botín-Sanabria, A.S. Mihaita, R.E. Peimbert-García, M.A. Ramírez-Moreno, R.A. Ramírez-Mendoza, J. de, J. Lozoya-Santos, Digital twin technology challenges and applications: a comprehensive review, Remote Sens. 14 (6) (2022) 1335.

[148] C.S. Shim, N.S. Dang, S. Lon, C.H. Jeon, Development of a bridge maintenance system for prestressed concrete bridges using 3D digital twin model, Struct. Infrastruct. Eng. 15 (10) (2019) 1319-1332.

[149] R.D. Lu, I. Brilakis, Digital twinning of existing reinforced concrete bridges from labelled point clusters, Autom. Constr. 105 (2019) 102837.

[150] Q.C. Lu, L. Chen, S. Li, M. Pitt, Semi-automatic geometric digital twinning for existing buildings based on images and CAD drawings, Autom. Constr. 115 (2020) 103183.

[151] A. Karakra, F. Fontanili, E. Lamine, J. Lamothe, HospiT’Win: A predictive simulation-based digital twin for patients pathways in hospital, in: 2019 IEEE EMBS International Conference on Biomedical & Health Informatics (BHI), Chicago, USA, IEEE, 2019, pp. 1-4.

[152] Y. Liu, L. Zhang, Y. Yang, L.F. Zhou, L. Ren, F. Wang, R. Liu, Z.B. Pang, M.J. Deen, A novel cloud-based framework for the elderly healthcare services using digital twin, IEEE Access 7 (2019) 49088-49101.

[153] A. Croatti, M. Gabellini, S. Montagna, A. Ricci, On the integration of agents and digital twins in healthcare, J. Med. Syst. 44 (9) (2020) 161.

[154] Y. Cai, B. Starly, P. Cohen, Y.S. Lee, Sensor data and information fusion to construct digital-twins virtual machine tools for cyber-physical manufacturing, Procedia Manuf. 10 (2017) 1031-1042.

[155] B.A. Talkhestani, N. Jazdi, W. Schloegl, M. Weyrich, Consistency check to synchronize the Digital Twin of manufacturing automation based on anchor points, Procedia CIRP 72 (2018) 159-164.

[156] J.J. Wang, L.K. Ye, R.X. Gao, C. Li, L.B. Zhang, Digital Twin for rotating machinery fault diagnosis in smart manufacturing, Int. J. Prod. Res. 57 (12) (2019) 3920-3934.

[157] F. Dembski, U. Wössner, M. Letzgus, M. Ruddat, C. Yamu, Urban digital twins for smart cities and citizens: The case study of herrenberg, Germany, Sustainability 12 (6) (2020) 2307.

[158] G. Schrotter, C. Hürzeler, The digital twin of the city of Zurich for urban planning, PFG 88 (1) (2020) 99-112.

[159] P. Skobelev, V. Laryukhin, E. Simonova, O. Goryanin, V. Yalovenko, O. Yalovenko, Multi-agent approach for developing a digital twin of wheat, in: 2020 IEEE International Conference on Smart Computing (SMARTCOMP), Bologna, Italy, IEEE, 2020, pp. 268-273.

[160] V. Erdélyi, L. Jánosi, Digital twin and shadow in smart pork fetteners, Int. J. Eng. Manag. Sci. 4 (1) (2019) 515-520.

[161] T. Machl, A. Donaubauer, T.H. Kolbe, Planning agricultural core road networks based on a digital twin of the cultivated landscape, J. Digit. Landsc. Arch. 4 (2019) 316-327.

[162] V. Damjanovic-Behrendt, A digital twin-based privacy enhancement mechanism for the automotive industry, in: 2018 International Conference on Intelligent Systems (IS), Funchal, Portugal, IEEE, 2018 pp. 272-279.

[163] P.K. Rajesh, N. Manikandan, C.S. Ramshankar, T. Vishwanathan, C. Sathishkumar, Digital twin of an automotive brake pad for predictive maintenance, Procedia Comput. Sci. 165 (2019) 18-24.

[164] J. Oyekan, M. Farnsworth, W. Hutabarat, D. Miller, A. Tiwari, Applying a 6 DoF robotic arm and digital twin to automate fan-blade reconditioning for aerospace maintenance, repair, and overhaul, Sens. Basel Switz. 20 (16) (2020) E4637.

[165] D. Guivarch, E. Mermoz, Y. Marino, M. Sartor, Creation of helicopter dynamic systems digital twin using multibody simulations, CIRP Ann. 68 (1) (2019) 133-136.

[166] E.T. Asr, R. Kakaie, M. Ataei, M.R. Tavakoli Mohammadi, A review of studies on sustainable development in mining life cycle, J. Clean. Prod. 229 (2019) 213-231.

[167] M.R. Gorman, D.A. Dzombak, A review of sustainable mining and resource management: transitioning from the life cycle of the mine to the life cycle of the mineral, Resour. Conserv. Recycl. 137 (2018) 281-291.

[168] J.A. Aznar-Sánchez, J.F. Velasco-Muñoz, L.J. Belmonte-Ureña, F. Manzano-Agugliaro, Innovation and technology for sustainable mining activity: a worldwide research assessment, J. Clean. Prod. 221 (2019) 38-54.

[169] T.H. Luan, R.H. Liu, L.X. Gao, R. Li, H.B. Zhou, The paradigm of digital twin communications, arxiv preprint arxiv: 2105.07182, 2021.

[170] M. Mashaly, Connecting the twins: a review on digital twin technology & its networking requirements, Procedia Comput. Sci. 184 (2021) 299-305.

[171] M. Groshev, C. Guimarães, A. De La Oliva, R. Gazda, Dissecting the impact of information and communication technologies on digital twins as a service, IEEE Access 9 (2862) 102862-102876.

[172] F. Beretta, A.L. Rodrigues, R.L. Peroni, J.F.C.L. Costa, Automated lithological classification using UAV and machine learning on an open cast mine, Appl. Earth Sci. 128 (3) (2019) 79-88.

[173] W. Hu, Y.Y. Huang, L. Wei, F. Zhang, H.C. Li, Deep convolutional neural networks for hyperspectral image classification, J. Sens. 2015 (2015) 258619.

[174] M. Mlynarczuk, M. Skiba, The application of artificial intelligence for the identification of the maceral groups and mineral components of coal, Comput. Geosci. 103 (2017) 133-141.

[175] T. Long, Z.B. Zhou, G. Hancke, Y. Bai, Q. Gao, A review of artificial intelligence technologies in mineral identification: classification and visualization, J. Sens. Actuator Netw. 11 (3) (2022) 50.

[176] X. Zeng, Y.C. Xiao, X.H. Ji, G.W. Wang, Mineral identification based on deep learning that combines image and mohs hardness, Minerals 11 (5) (2021) 506.

[177] Z.H. Xu, W. Ma, P. Lin, H. Shi, D.D. Pan, T.H. Liu, Deep learning of rock images for intelligent lithology identification, Comput. Geosci. 154 (2021) 104799.

[178] G. Walton, G. Mills, G. Fotopoulos, R. Radovanovic, R.P.W. Stancliffe, An approach for automated lithological classification of point clouds, Geosphere 12 (6) (2016) 1833-1841.

[179] S.E.Z. Lashari, A. Takbiri-Borujeni, E. Fathi, T. Sun, R. Rahmani, M. Khazaeli, Drilling performance monitoring and optimization: a data-driven approach, J. Petrol. Explor. Prod. Technol. 9 (4) (2019) 2747-2756.

[180] H. Shirmard, E. Farahbakhsh, R.D. Müller, R. Chandra, A review of machine learning in processing remote sensing data for mineral exploration, Remote. Sens. Environ. 268 (2022) 112750.

[181] S. Peyghambari, Y. Zhang, Hyperspectral remote sensing in lithological mapping, mineral exploration, and environmental geology: an updated review, J. Appl. Rem. Sens. 15 (3) (2021) 031501.

[182] S.E. Zhang, G.T. Nwaila, J.E. Bourdeau, Y. Ghorbani, E.J.M. Carranza, Deriving big geochemical data from high-resolution remote sensing data via machine learning: application to a tailing storage facility in the Witwatersrand goldfields, Artif. Intell. Geosci. 4 (2023) 9-21.

[183] L.L. Wang, L. Yang, W.S. Wang, B.L. Chen, X.L. Sun, Monitoring mining activities using sentinel-1A InSAR coherence in open-pit coal mines, Remote. Sens. 13 (21) (2021) 4485.

[184] Orica, Real-time downhole geophysics and directional data while drilling. https://www.orica.com/Products-Services/Digital-Solutions/drillmax (Accessed August 26, 2024).

[185] RHINO, High-definition orebody knowledge for maximum ore recovery. https://www.orica.com/Products-Services/Digital-Solutions/rhino (Accessed August 26, 2024).

[186] M. Abdelkareem, N. Al-Arifi, Synergy of remote sensing data for exploring hydrothermal mineral resources using GIS-based fuzzy logic approach, Remote. Sens. 13 (22) (2021) 4492.

[187] PETRA, Empowering engineers with digital twin Drill & Blast predictions, 2024. https://www.petradatascience.com/casestudy/empowering-engineers-with-digital-twin-drill-blast-predictions/ (Accessed August 26, 2024).

[188] M. Gholami Mayani, R. Rommetveit, S.I. Oedegaard, M. Svendsen, Drilling automated realtime monitoring using digital twin, in: Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, UAE, SPE, 2018, p. D021S030R004.

[189] M. Servin, F. Vesterlund, E. Wallin, Digital twins with distributed particle simulation for mine-to-mill material tracking, Minerals 11 (5) (2021) 524.

[190] Drilling automation makes every shot worth more, 2021. https://s7d2.scene7.com/is/content/Caterpillar/CM20220228-87762-7036c (Accessed August 26, 2024).

[191] Every operation starts with drilling, 2020. https://s7d2.scene7.com/is/content/Caterpillar/CM20210413-afacb-99370 (Accessed August 26, 2024).

[192] A. Nikkhah, A.B. Vakylabad, A. Hassanzadeh, T. Niedoba, A. Surowiak, An evaluation on the impact of ore fragmented by blasting on mining performance, Minerals 12 (2) (2022) 258.

[193] Acoem Team, Accurate blast monitoring, 2024. https://www.acoem.com/en/ranges/dust-blast-monitoring/accurate-blast-monitoring/ (Accessed August 26, 2024).

[194] M. Zhu, P.G. Wei, J.G. Zhang, X.D. Si, Automatic monitoring system of blasting vibration and its application based on TC6850, in: A.G. Correia, J. Tinoco, P. Cortez, L. Lamas (Eds.), Springer Series in Geomechanics and Geoengineering, Springer, 2019, pp. 336-352.

[195] T. Bamford, K. Esmaeili, A.P. Schoellig, A real-time analysis of post-blast rock fragmentation using UAV technology, Int. J. Min. Reclam. Environ. 31 (6) (2017) 439-456.

[196] T. Bamford, F. Medinac, K. Esmaeili, Continuous monitoring and improvement of the blasting process in open pit mines using unmanned aerial vehicle techniques, Remote. Sens. 12 (17) (2020) 2801.

[197] U. Kumar, A. Shaik, Blast fragmentation analysis using image processing, J. Phys.: Conf. Ser. 1716 (1) (2020) 012055.

[198] M. Mohammadnejad, R. Gholami, F. Sereshki, A. Jamshidi, A new methodology to predict backbreak in blasting operation, Int. J. Rock. Mech. Min. Sci. 60 (2013) 75-81.

[199] J. Valencia, Automated Detection and Localization of Blastholes Through UAV Imaging and Machine Learning (Dissertation), University of Nevada, Reno, USA, 2024.

[200] C. Xie, H. Nguyen, X. Bui, Y. Choi, J. Zhou, T. Nguyen-Trang, Predicting rock size distribution in mine blasting using various novel soft computing models based on meta-heuristics and machine learning algorithms, Geosci. Front. 12 (3) (2021) 101108.

[201] ABB, Automated robot charger for remote blasting of rock face, 2024. https://new.abb.com/mining/mineoptimize/systems-solutions/mining-automation/mining-robots-move-people-away-from-unsafe-areas-and-towards-the-autonomous-mine-vision (Accessed August 26, 2024).

[202] ORCIA, A revolutionary bulk explosives system that matches a wider range of explosives energy to changes in geology in real time, 2024. https://www.orica.com/4d (Accessed August 26, 2024).

[203] T. Komatsu, Y. Konno, S. Kiribayashi, K. Nagatani, T. Suzuki, K. Ohno, T. Suzuki, N. Miyamoto, Y. Shibata, K. Asano, Autonomous driving of six-wheeled dump truck with a retrofitted robot, in: G. Ishigami, K. Yoshida (Eds.), Field and Service Robotics. Springer Proceedings in Advanced Robotics, 16, Springer, Singapore, 2021, pp. 59-72.

[204] T. Suzuki, K. Ohno, S. Kojima, N. Miyamoto, T. Suzuki, T. Komatsu, Y. Shibata, K. Asano, K. Nagatani, Estimation of articulated angle in six-wheeled dump trucks using multiple GNSS receivers for autonomous driving, Adv. Robot. 35 (23) (2021) 1376-1387.

[205] Y. Sugasawa, S. Chikushi, R. Komatsu, J.Y. Louhi Kasahara, S. Pathak, R. Yajima, S. Hamasaki, K. Nagatani, T. Chiba, K. Chayama, A. Yamashita, H. Asama, Visualization of dump truck and excavator in bird’s-eye view by fisheye cameras and 3d range sensor, in: M.H. Ang, Jr H. Asama, W. Lin, S. Foong (Eds.), Intelligent Autonomous Systems 16. IAS 2021. Lecture Notes in Networks and Systems, 412, Springer, Cham, 2021, pp. 629-640.

[206] K. Yamada, K. Ohno, N. Miyamoto, T. Suzuki, S. Kojima, R.P.B. Neto, T. Suzuki, K. Nagatani, Y. Shibata, K. Asano, T. Komatsu, S. Tadokoro, Attachable sensor boxes to visualize backhoe motion, in: 2020 IEEE/SICE International Symposium on System Integration (SII), Honolulu, USA, IEEE, 2020, pp. 706-711.

[207] J.H. Lee, J. Lee, S.Y. Park, 3D pose recognition system of dump truck for autonomous excavator, Appl. Sci. 12 (7) (2022) 3471.

[208] H. Saito, H. Sugiura, S. Yuta, Development of autonomous dump trucks system (HIVACS) in heavy construction sites, in: Proceedings of 1995 IEEE International Conference on Robotics and Automation, Nagoya, Japan, IEEE, 1995, pp. 2524-2529.

[209] A. Job, M. Edgar, P.R. McAree, Real time shovel-mounted coal or ore sensing, in: Proceedings of the AusIMM Iron Ore Conference, 2017, pp. 397-406.

[210] B.N. Wang, Y. Duan, W. Xu, Real-time recognition of loading cycles’ process based on electric mining shovel monitoring, Shock. Vib. 2022 (2022) 4874817.

[211] S.N. Lim, N. Zhou, J.V.B. Soares, System and method for detecting missing tooth in mining shovel, U.S. Patent No. 9886754, Feb. 6, 2018.

[212] X. Liu, X. Qi, Y. Jiang, Electric shovel teeth missing detection method based on deep learning, Comput. Intell. Neurosci. 2021 (2021) 6503029.

[213] V. Zamani, H. Taghaddos, Y. Gholipour, Sensor-fused simulation-based decision support system for earthmoving projects, Autom. Constr. 156 (2023) 105117.

[214] FutureBridge, Autonomous Haulage Systems-The future of mining operations, 2024. https://www.futurebridge.com/industry/perspectives-industrial-manufacturing/autonomous-haulage-systems-the-future-of-mining-operations/ (Accessed August 26, 2024).

[215] Sandvik, The next generation of autonomous drilling, 2024. https://www.rocktechnology.sandvik/en/campaigns/nextgenautomation/ (Accessed August 26, 2024).

[216] m-works, Simulation mechanical part and electric drive of mine hoist system in real time mode together with mining safety hardware, 2023. https://www.m-works.pro/digital-twin-of-mine-hoist-system (Accessed August 26, 2024).

[217] P. Kalinowski, O. Długosz, P. Kamiński, Digital twin of the mining shaft and hoisting system as an opportunity to improve the management processes of shaft infrastructure diagnostics and monitoring, in: S. Shirowzhan (Ed.), Data Science, Data Visualization, and Digital Twins, IntechOpen, 2021.

[218] J. Chamorro, L. Vallejo, C. Maynard, S. Guevara, J.A. Solorio, N. Soto, K.V. Singh, U. Bhate, R.K. G.V.v, J. Garcia, B. Newell, Health monitoring of a conveyor belt system using machine vision and real-time sensor data, CIRP J. Manuf. Sci. Technol. 38 (2022) 38-50.

[219] ABB, ABB Ability™ Condition Monitoring for belts, 2024. https://new.abb.com/mining/services/advanced-digital-services/abb-ability-condition-monitoring-for-belts (Accessed August 26, 2024).

[220] M. Stachowiak, W. Koperska, P. Stefaniak, A. Skoczylas, S. Anufriiev, Procedures of detecting damage to a conveyor belt with use of an inspection legged robot for deep mine infrastructure, Minerals 11 (10) (2021) 1040.

[221] R. Blazej, L. Jurdziak, A. Kirjanow-Blazej, T. Kozlowski, Identification of damage development in the core of steel cord belts with the diagnostic system, Sci. Rep. 11 (2021) 12349.

[222] HAWK, Detecting water and coal ore on a conveyor belt, 2024. https://www.hawkmeasurement.com/industries/minerals-and-mining/detecting-water-and-coal-ore-on-a-conveyor-belt/ (Accessed August 26, 2024).

[223] T. Oliinyk, S. Yefimenko, Z. Abdrakhmanova, A. Kan, F. Issatayeva, Online ore monitoring using EDXRF method on process conveyor belts at Kazakhmys Corporation LLC operations, E3S Web Conf. 166 (2020) 02010.

[224] Y.H. Fu, C. Aldrich, Online particle size analysis on conveyor belts with dense convolutional neural networks, Miner. Eng. 193 (2023) 108019.

[225] M. Li, X. Wang, H. Yao, H. Saxén, Y.W. Yu, Analysis of particle size distribution of coke on blast furnace belt using object detection, Processes 10 (10) (2022) 1902.

[226] FLS, Digital Twin for belt conveyor systems, 2024. https://www.flsmidth.com/en-gb/products/process-control-and-optimisation/digital-twin-for-belt-conveyors (Accessed August 26, 2024).

[227] Business Wire, Bruker introduces S2 KODIAKTM, the world’s most advanced online XRF multi-element analyzer for real-time results in mining of base metal ores and industrial minerals, 2024. https://www.businesswire.com/news/home/20140224006603/en/Bruker-Introduces-S2-KODIAKTM-the-World’s-Most-Advanced-Online-XRF-Multi-Element-Analyzer-for-Real-Time-Results-in-Mining-of-Base-Metal-Ores-and-Industrial-Minerals (Accessed August 26, 2024).

[228] M. Kistner, G.T. Jemwa, C. Aldrich, Monitoring of mineral processing systems by using textural image analysis, Miner. Eng. 52 (2013) 169-177.

[229] S. Mishra, A.K. Majumder, Online techniques for performance and condition monitoring of hydrocyclone: Present status and the future, Miner. Process. Extr. Metall. Rev. 44 (4) (2023) 281-296.

[230] A. Nad, M. Jooshaki, E. Tuominen, S. Michaux, A. Kirpala, J. Newcomb, Digitalization solutions in the mineral processing industry: the case of GTK Mintec, Finland, Minerals 12 (2) (2022) 210.

[231] W. Baum, Ore characterization, process mineralogy and lab automation a roadmap for future mining, Miner. Eng. 60 (2014) 69-73.

[232] K. Ausburn, Rise of the machines-interview in mining magazine, Min. Mag. 3 (2013) 24-25.

[233] B.A. Wills, J.A. Finch FRSC, FCIM, P.Eng., Chapter 7-Grinding mills, in: Wills’ Mineral Processing Technology (Eighth Edition), 2016, pp. 147-179.

[234] METNET, G.T.K. is investing significantly to renew the GTK mintec pilot plant, 2024. https://prometia.eu/2021/04/01/gtk-is-investing-significantly-to-renew-the-gtk-mintec-pilot-plant/ (Accessed August 26, 2024).

[235] METSO, Courier® 5X/6X SL analyzer, 2024. https://www.metso.com/portfolio/courier-5×6x-sl-analyzer/?r=3 (Accessed August 26, 2024).

[236] Bachman, Fluids online recognition identification and determination analyzer, 2024. https://jcbachmann.com/products/florida/ (accessed August 26, 2024).

[237] J.A. Aznar-Sánchez, J.J. García-Gómez, J.F. Velasco-Muñoz, A. Carretero-Gómez, Mining waste and its sustainable management: advances in worldwide research, Minerals 8 (7) (2018) 284.

[238] T. Karlsson, P.M. Kauppila, M. Lehtonen, Potential for beneficial reuse of waste rocks from kevitsa and hitura mines: indicative data from lysimeter tests, Bull. Geol. Surv. Finl. 408 (2018) 43-58.

[239] P.M. Kauppila, M. Lehtonen, N. Heino, Optimisation of raw material potential and environmental properties of tailings: an operational model, Bull. Geol. Surv. Finl. 408 (2018) 97-110.

[240] A. Jahedsaravani, M. Massinaei, M.H. Marhaban, An image segmentation algorithm for measurement of flotation froth bubble size distributions, Measurement 111 (2017) 29-37.

[241] A. Jahedsaravani, M.H. Marhaban, M. Massinaei, Prediction of the metallurgical performances of a batch flotation system by image analysis and neural networks, Miner. Eng. 69 (2014) 137-145.

[242] Emerson, Applying the digital twin to crushing circuits, 2019. https://www.emerson.com/documents/automation/flyer-applying-digital-twin-to-crushing-circuits-dynamic-simulation-en-5430478.pdf (Accessed August 26, 2024).

[243] J. Sikstrom, R. Brown, R. Koorts, Case study: The use of a digital twin with Advanced Process Control at Boliden Aitik mine, ABB, 2023. https://new.abb.com/mining/mineoptimize/digital-applications/advanced-process-control/case-study-the-use-of-a-digital-twin-with-advanced-process-control-at-boliden-aitik-mine (Accessed August 26, 2024).

[244] K.S. Zhang, Q. Xu, C.X. Liu, T.Y. Chai, Intelligent decision-making system for mineral processing production indices based on digital twin interactive visualization, J. Vis. 27 (3) (2024) 421-436.

[245] O. Hasidi, E.H. Abdelwahed, M.A. El Alaoui-Chrifi, A. Qazdar, I. Benzakour, F. Bourzeix, A. Bendaouia, Digital twin of minerals processing operations for an advanced monitoring and supervision: froth flotation process case study, Int. J. Adv. Manuf. Technol. 132 (1) (2024) 1031-1049.

[246] R. Edirisinghe, Digital skin of the construction site, Eng. Constr. Archit. Manag. 26 (2) (2019) 184-223.

[247] S.Y. Guo, L.Y. Ding, H.B. Luo, X.Y. Jiang, A big-data-based platform of workers’ behavior: observations from the field, Accid. Anal. Prev. 93 (2016) 299-309.

[248] A.K. Ji, X.L. Xue, Y.D. Dou, Y.N. Wang, Construction workers’ behaviors rec ognition using 2D image human skeleton parameterized method, in: ICCREM 2019, 2019, pp. 35-41.

[249] I.A. Cruz-Albarran, J.P. Benitez-Rangel, R.A. Osornio-Rios, L.A. Morales-Hernandez, Human emotions detection based on a smart-thermal system of thermographic images, Infrared Phys. Technol. 81 (2017) 250-261.

[250] H.P.H. Wathsara, M.L.P.D. Dhananjana, D.A. Nanayakkara, B.B.K.R. Dharmarathne, L.H.S. Chandrasiri, J.K. Joseph, Employee work motivation detection using image and audio processing, Int. J. Comput. Appl. 175 (31) (2020) 34-40.

[251] Y. Choi, Applications of unmanned aerial vehicle and artificial intelligence technologies in mining from exploration to reclamation, Minerals 13 (3) (2023) 382.

[252] F. Azhari, S. Kiely, C. Sennersten, C. Lindley, M. Matuszak, S. Hogwood, A comparison of sensors for underground void mapping by unmanned aerial vehicles, in: Proceedings of the First International Conference on Underground Mining Technology, Australian Centre for Geomechanics, Perth, 2017, pp. 419-430.

[253] E.A. Russell, M.M. MacLaughlin, R.M. Turner, UAV-based geotechnical modeling and mapping of an inaccessible underground site, in: 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, Washington, 2018, p. ARMA-2018-516.

[254] R.M. Turner, N.P. Bhagwat, L.J. Galayda, C.S. Knoll, E.A. Russell, M.M. MacLaughlin, Geotechnical characterization of underground mine excavations from UAV-captured photogrammetric & thermal imagery, in: 52nd U.S. Rock Mechanics/Geomechanics Symposium, Seattle, Washington, 2018, p. ARMA-2018-508.

[255] T.Z. Xiang, G.S. Xia, L.P. Zhang, Mini-unmanned aerial vehicle-based remote sensing: techniques, applications, and prospects, IEEE Geosci. Remote. Sens. Mag. 7 (3) (2019) 29-63.

[256] M.Y.A. Madjid, V. Vandeginste, G. Hampson, C.J. Jordan, A.D. Booth, Drones in carbonate geology: opportunities and challenges, and application in diagenetic dolomite geobody mapping, Mar. Petrol. Geol. 91 (2018) 723-734.

[257] F. Beretta, H. Shibata, R. Cordova, R. de Lemos Peroni, J. Azambuja, J.F.C.L. Costa, Topographic modelling using UAVs compared with traditional survey methods in mining, REM, Int. Eng. J. 71 (3) (2018) 463-470.

[258] S. Jakob, R. Zimmermann, R. Gloaguen, Processing of drone-borne hyperspectral data for geological applications, in: 2016 8th Workshop on Hyperspectral Image and Signal Processing: Evolution in Remote Sensing (WHISPERS), Los Angeles, CA, USA, IEEE, 2016, pp. 1-5.

[259] S. Jakob, R. Zimmermann, R. Gloaguen, The need for accurate geometric and radiometric corrections of drone-borne hyperspectral data for mineral exploration: MEPHySTo-a toolbox for pre-processing drone-borne hyperspectral data, Remote. Sens. 9 (1) (2017) 88.

[260] J. Stoll, D. Moritz, Unmanned aircraft systems for rapid Near Surface Geophysical Measurements, in: 75th EAGE Conference & Exhibition - Workshops, London, UK, 2013, p. cp-349-00062.

[261] A. Parshin, N. Grebenkin, V. Morozov, F. Shikаlenko, Research Note: first results of a low-altitude unmanned aircraft system gamma survey by comparison with the terrestrial and aerial gamma survey data, Geophys. Prospect. 66 (7) (2018) 1433-1438.

[262] A.V. Parshin, V.A. Morozov, A.V. Blinov, A.N. Kosterev, A.E. Budyak, Low-altitude geophysical magnetic prospecting based on multirotor UAV as a promising replacement for traditional ground survey, Geo Spat. Inf. Sci. 21 (1) (2018) 67-74.

[263] C. Walter, A. Braun, G. Fotopoulos, High-resolution unmanned aerial vehicle aeromagnetic surveys for mineral exploration targets, Geophys. Prospect. 68 (1) (2020) 334-349.

[264] G. Sofia, F. Marinello, P. Tarolli, A new landscape metric for the identification of terraced sites: the slope local length of auto-correlation (SLLAC), ISPRS J. Photogramm. Remote. Sens. 96 (2014) 123-133.

[265] D. Stead, D. Donati, A. Wolter, M. Sturzenegger, Application of remote sensing to the investigation of rock slopes: experience gained and lessons learned, ISPRS Int. J. Geo Inf. 8 (7) (2019) 296.

[266] T. McLeod, C. Samson, M. Labrie, K. Shehata, J. Mah, P. Lai, L. Wang, J.H. Elder, Using video acquired from an unmanned aerial vehicle (UAV) to measure fracture orientation in an open-pit mine, Geomatica 67 (3) (2013) 173-180.

[267] X.L. Zhan, X.Z. Zhang, X. Wang, X.P. Diao, L.Z. Qi, Comparative analysis of surface deformation monitoring in a mining area based on UAV-lidar and UAV photogrammetry, Photogramm. Rec. 39 (186) (2024) 373-391.

[268] H. Péter, D. László, V.P. János, Civilian use of drones in the life of mining rescue helicopters, in: 2016 IEEE 17th International Symposium on Computational Intelligence and Informatics (CINTI), Budapest, Hungary, IEEE, 2016, pp. 299-302.

[269] M. Alvarado, F. Gonzalez, A. Fletcher, A. Doshi, Towards the development of a low cost airborne sensing system to monitor dust particles after blasting at open-pit mine sites, Sens. Basel Switz. 15 (8) (2015) 19667-19687.

[270] Y. Fang, Z.Z. Hu, L.L. Xu, A. Wong, D.A. Clausi, Estimation of iron concentration in soil of A mining area from uav-based hyperspectral imagery, in: 2019 10th Workshop on Hyperspectral Imaging and Signal Processing: Evolution in Remote Sensing (WHISPERS), Amsterdam, Netherlands, IEEE, 2019, pp. 1-5.

[271] R. Jackisch, S. Lorenz, R. Zimmermann, R. Möckel, R. Gloaguen, Drone-borne hyperspectral monitoring of acid mine drainage: An example from the Sokolov lignite district, Remote. Sens. 10 (3) (2018) 385.

[272] D. Castendyk, B. Straight, J. Voorhis, M. Somogyi, W. Jepson, B. Kucera, Using aerial drones to select sample depths in pit lakes, in: Mine Closure 2019: Proceedings of the 13th International Conference on Mine Closure, Australian Centre for Geomechanics, Perth, 2019, pp. 1113-1126.

[273] P.G. Martin, O.D. Payton, J.S. Fardoulis, D.A. Richards, T.B. Scott, The use of unmanned aerial systems for the mapping of legacy uranium mines, J. Environ. Radioact. 143 (2015) 135-140.

[274] V. Moudrý, R. Urban, M. Štroner, J. Komárek, J. Brouček, J. Prošek, Comparison of a commercial and home-assembled fixed-wing UAV for terrain mapping of a post-mining site under leaf-off conditions, Int. J. Remote. Sens. 40 (2) (2019) 555-572.

[275] J.C. Padró, V. Carabassa, J. Balagué, L. Brotons, J.M. Alcañiz, X. Pons, Monitoring opencast mine restorations using Unmanned Aerial System (UAS) imagery, Sci. Total Environ. 657 (2019) 1602-1614.

[276] L. Li, R.X. Zhang, Q.S. Li, K. Zhang, Z.G. Liu, Z.C. Ren, Multidimensional spatial monitoring of open pit mine dust dispersion by unmanned aerial vehicle, Sci. Rep. 13 (2023) 6815.

[277] AEROQUAL, Why monitor mine, construction and quarry dust in real-time? 2024. https://www.aeroqual.com/blog/quarry-dust-monitoring (Accessed August 26, 2024).

[278] F. Hasheminasab, S.M. Aminossadati, R. Bagherpour, M. Amanzadeh, Fibre-optic based sensors for dust monitoring, in: 2017 2nd International Conference for Fibre-optic and Photonic Sensors for Industrial and Safety Applications (OFSIS), Brisbane, QLD, Australia, IEEE, 2017, pp. 33-38.

[279] B.D. Setiawan, M. Kovacs, U. Serdült, V. Kryssanov, Semantic segmentation on smartphone motion sensor data for road surface monitoring, Procedia Comput. Sci. 204 (2022) 346-353.

[280] S. Sattar, S.N. Li, M. Chapman, Developing a near real-time road surface anomaly detection approach for road surface monitoring, Measurement 185 (2021) 109990.

[281] T. Kumar, D. Acharya, D. Lohani, Modeling IoT enabled classification system for road surface monitoring, in: 2022 14th International Conference on COMmunication Systems & NETworkS (COMSNETS), Bangalore, India, IEEE, 2022, pp. 836-841.

[282] N. Zakharia, Real-time dust monitoring on haul roads, Safe to Work, 2021. https://safetowork.com.au/real-time-dust-monitoring-on-haul-roads/ (Accessed August 26, 2024).

[283] PETRA, MAXTA, 2024. https://www.petradatascience.com/maxta/ (Accessed August 26, 2024).

[284] IES/ Orica, IES, 2024. https://www.orica.com/Products-Services/Digital-Solutions/integrated-extraction-simulator (Accessed August 26, 2024).

[285] MathWorks, Simulink, 2024. https://au.mathworks.com/products/simulink.html (Accessed August 26, 2024).

[286] GEOVIA, 2024. https://www.3ds.com/products/geovia (Accessed August 26, 2024).