Effect of acid corrosion on the surface roughness and floatability of magnesite and dolomite

Abstract

To modify surface roughness and improve flotation performance, hydrochloric acid etching pretreatment was performed on magnesite and dolomite. Flotation tests disclosed that acid corrosion improved the flotation kinetics and flotation recovery rates of magnesite and dolomite. Under pulp pH 10 and sodium oleate (NaOl) concentration 20 mg·L⁻¹, the flotation recovery rates of magnesite and dolomite after acid etching increased by 31.05% and 29.20%, respectively, compared with those before acid etching. Adsorption density tests proved that the adsorption density of NaOl on magnesite and dolomite was higher after acid etching than before acid etching, implying that acid etching drives NaOl adsorption. Zeta potential analysis revealed that acid etching reduces the point of zero charge of magnesite and dolomite. Atomic force microscopy and X-ray photoelectron spectroscopy results demonstrated that acid corrosion modified the surface roughness of magnesite and dolomite, increasing the magnesium (Mg) content on the magnesite surface and the calcium and Mg contents on the dolomite surface. Contact angle measurements indicated that acid corrosion slightly reduced the contact angle between magnesite and dolomite. With NaOl present on the surface, the contact angles of magnesite and dolomite after acid etching significantly increased compared with those before acid etching. Therefore, acid etching is effective in improving the floatability of magnesite and dolomite.

Keywords

Acid corrosion / Surface roughness / Flotation rate / Magnesite / Dolomite

References

[1] S. Rahimpour Golroudbary, I. Makarava, A. Kraslawski, Environmental assessment of global magnesium production, Miner. Process. Extr. Metall. Rev. 44 (6) (2023) 389-406.

[2] C.L. Adam, R.G. Hemingway, N.S. Ritchie, Influence of manufacturing conditions on the bioavailability of magnesium in calcined magnesites measured in vivo and in vitro, J. Agric. Sci. 127 (3) (1996) 377-385.

[3] J.F. He, X. Zhang, Q. Bai, S.B. Huang, H. Chen, C.J. Guo, L.T. Zhu, B. Yang, Surface modification to enhance the decarbonization performance of coal-series kaolin by triboelectric separation, Appl. Clay Sci. 235 (2023) 106857.

[4] X.F. Gong, J. Yao, B. Yang, W.Z. Yin, J. Guo, N.B. Song, Y.L. Wang, H.R. Sun, Activation-inhibition mechanism of diammonium hydrogen phosphate in flotation separation of brucite and calcite, J. Environ. Chem. Eng. 11 (3) (2023) 110184.

[5] B. Yang, L.T. Zhu, J.F. He, W.Z. Yin, J. Yao, A feasible strategy for depressant-free flotation separation of siderite from magnesiohornblende using a highly selective collector, J. Mol. Liq. 394 (2024) 123689.

[6] X.F. Gong, J. Yao, B. Yang, W.Z. Yin, Y.L. Wang, Y.F. Fu, Adsorption mechanism of green efficient chelating poly-L-aspartic acid in flotation separation of brucite and dolomite, Adv. Powder Technol. 34 (11) (2023) 104207.

[7] X.F. Gong, J. Yao, B. Yang, W.Z. Yin, Y.L. Wang, Y.F. Fu, Selective adsorption of the activator diammonium hydrogen phosphate in the reverse flotation separation of brucite and dolomite, Powder Technol. 429 (2023) 118923.

[8] H.R. Sun, B. Yang, Z.L. Zhu, W.Z. Yin, Q.Y. Sheng, Y. Hou, J. Yao, New insights into selective-depression mechanism of novel depressant EDTMPS on magnesite and quartz surfaces: adsorption mechanism, DFT calculations, and adsorption model, Miner. Eng. 160 (2021) 106660.

[9] W.Z. Yin, H.R. Sun, J. Hong, S.H. Cao, B. Yang, C. Won, M. Song, Effect of Ca selective chelator BAPTA as depressant on flotation separation of magnesite from dolomite, Miner. Eng. 144 (2019) 106050.

[10] X.F. Gong, J. Yao, B. Yang, J. Guo, H.R. Sun, W.Z. Yin, Study on the inhibition mechanism of guar gum in the flotation separation of brucite and dolomite in the presence of SDS, J. Mol. Liq. 380 (2023) 121721.

[11] Q.C. Feng, W.H. Yang, S.M. Wen, H. Wang, W.J. Zhao, G. Han, Flotation of copper oxide minerals: a review, Int. J. Min. Sci. Technol. 32 (6) (2022) 1351-1364.

[12] Z.L. Zhu, Y.F. Fu, W.Z. Yin, H.R. Sun, K.Q. Chen, Y. Tang, B. Yang, Role of surface roughness in the magnesite flotation and its mechanism, Particuology 62 (2022) 63-70.

[13] W.X. Zhong, W.Z. Yin, Y.L. Wang, J. Yao, Selective flotation of magnesite from dolomite using α-chloro-oleate acid as collector, Powder Technol. 373 (2020) 147-151.

[14] Z.L. Zhu, W.Z. Yin, D.H. Wang, H.R. Sun, K.Q. Chen, B. Yang, The role of surface roughness in the wettability and floatability of quartz particles, Appl. Surf. Sci. 527 (2020) 146799.

[15] Ö. Bıçak, Z. Ekmekçi, M. Can, Y. Öztürk, The effect of water chemistry on froth stability and surface chemistry of the flotation of a Cu-Zn sulfide ore, Int. J. Miner. Process 102-103 (2012) 32-37.

[16] L.P. Luo, L.H. Xu, X.Z. Shi, J.P. Meng, R.H. Liu, Microscale insights into the influence of grinding media on spodumene micro-flotation using mixed anionic/cationic collectors, Int. J. Min. Sci. Technol. 32 (1) (2022) 171-179.

[17] P.E. Sarquís, J.M. Menéndez-Aguado, M.M. Mahamud, R. Dzioba, Tannins: the organic depressants alternative in selective flotation of sulfides, J. Clean. Prod. 84 (2014) 723-726.

[18] L.M. Yang, Z. Gao, T. Liu, M.T. Huang, G.Z. Liu, Y.F. Feng, P.H. Shao, X.B. Luo, Direct electrochemical leaching method for high-purity lithium recovery from spent lithium batteries, Environ. Sci. Technol. 57 (11) (2023) 4591-4597.

[19] L.O. Filippov, L.A. Silva, A.M. Pereira, L.C. Bastos, J.C.G. Correia, K. Silva, A. Piçarra, Y. Foucaud, Molecular models of hematite, goethite, kaolinite, and quartz: surface terminations, ionic interactions, nano topography, and water coordination, Colloids Surf. A Physicochem. Eng. Aspects 650 (2022) 129585.

[20] G.L. Zhu, Y.H. Zhao, X.Y. Zheng, Y.H. Wang, H.T. Zheng, D.F. Lu, Surface features and flotation behaviors of spodumene as influenced by acid and alkali treatments, Appl. Surf. Sci. 507 (2020) 145058.

[21] N.N. Zhang, M. Ejtemaei, A.V. Nguyen, C.C. Zhou, XPS analysis of the surface chemistry of sulfuric acid-treated kaolinite and diaspore minerals with flotation reagents, Miner. Eng. 136 (2019) 1-7.

[22] P.S. Parapari, M. Irannajad, A. Mehdilo, Modification of ilmenite surface properties by superficial dissolution method, Miner. Eng. 92 (2016) 160-167.

[23] P. Semsari Parapari, M. Irannajad, A. Mehdilo, Effect of acid surface dissolution pretreatment on the selective flotation of ilmenite from olivine and pyroxene, Int. J. Miner. Process. 167 (2017) 49-60.

[24] B. Feng, Y.P. Lu, Q.M. Feng, M.Y. Zhang, Y.L. Gu, Talc-serpentine interactions and implications for talc depression, Miner. Eng. 32 (2012) 68-73.

[25] X.F. Gong, J. Yao, B. Yang, Y.F. Fu, Y.L. Wang, W.Z. Yin, Selective flotation of brucite from calcite using HEDP-4Na as an inhibitor in a SDS system, J. Ind. Eng. Chem. 125 (2023) 390-401.

[26] B. Yang, D.H. Wang, S.H. Cao, W.Z. Yin, J.W. Xue, Z.L. Zhu, Y.F. Fu, J. Yao, Selective adsorption of a high-performance depressant onto dolomite causing effective flotation separation of magnesite from dolomite, J. Colloid Interface Sci. 578 (2020) 290-303.

[27] X.F. Gong, J. Yao, B. Yang, W.Z. Yin, J. Guo, N.B. Song, Y.L. Wang, H.R. Sun, Y.F. Fu, Selective activation of new regulator SMP in reverse flotation separation of brucite and calcite, Colloids Surf. A Physicochem. Eng. Aspects 675 (2023) 132049.

[28] A. Hassanzadeh, D. Huu Hoang, M. Brockmann, Assessment of flotation kinetics modeling using information criteria; case studies of elevated-pyritic copper sulfide and high-grade carbonaceous sedimentary apatite ores, J. Dispers. Sci. Technol. 41 (7) (2020) 1083-1094.

[29] H.J. Zhang, J.T. Liu, Y.J. Cao, Y.T. Wang, Effects of particle size on lignite reverse flotation kinetics in the presence of sodium chloride, Powder Technol. 246 (2013) 658-663.

[30] R.D. Stanojlovi, J.M. Sokolovi, A study of the optimal model of the flotation kinetics of copper slag from copper mine BOR, Arch. Min. Sci. 59 (3) (2014) 821-834.

[31] X.M. Yuan, B.I. Palsson, K.S.E. Forssberg, Statistical interpretation of flotation kinetics for a complex sulphide ore, Miner. Eng. 9 (4) (1996) 429-442.

[32] S.H. Cao, W.Z. Yin, B. Yang, Z.L. Zhu, H.R. Sun, Q.Y. Sheng, K.Q. Chen, Insights into the influence of temperature on the adsorption behavior of sodium oleate and its response to flotation of quartz, Int. J. Min. Sci. Technol. 32 (2) (2022) 399-409.

[33] C.J. Fang, S.C. Yu, X.Y. Wei, H. Peng, L.M. Ou, G.F. Zhang, J. Wang, The cation effect on adsorption of surfactant in the froth flotation of low-grade diasporic bauxite, Miner. Eng. 144 (2019) 106051.

[34] M.Y. Li, C. Yang, Z.Y. Wu, X.P. Gao, X. Tong, X.K. Yu, H.M. Long, Selective depression action of taurine in flotation separation of specularite and chlorite, Int. J. Min. Sci. Technol. 32 (3) (2022) 637-644.

[35] Z.L. Zhu, D.H. Wang, B. Yang, W.Z. Yin, M.S. Ardakani, J. Yao, J.W. Drelich, Effect of nano-sized roughness on the flotation of magnesite particles and particle-bubble interactions, Miner. Eng. 151 (2020) 106340.

[36] X.F. Gong, J. Yao, B. Yang, Z.L. Zhu, J. Guo, W.Z. Yin, Y.F. Fu, Y.L. Wang, An environment-friendly and highly effective inhibitor for flotation separation of brucite and dolomite in SDS system, Sep. Sci. Technol. 58 (10) (2023) 1784-1794.

[37] N.N. Zhang, T. Pang, R. Han, Z.L. Zhu, Z. Li, Insight into anionic and cationic flotation discrepancy of quartz with altered surface roughness by acid etching, J. Mol. Liq. 381 (2023) 121816.

[38] Z.L. Zhu, Z. Li, W.Z. Yin, B. Yang, N.N. Zhang, J.Z. Qu, S.J. Chen, J. Chang, Y.X. Yu, L.J. Liu, Effect of surface roughness on the flotation separation of hematite from fine quartz, J. Ind. Eng. Chem. 109 (2022) 431-441.

[39] B. Vaziri Hassas, H. Caliskan, O. Guven, F. Karakas, M. Cinar, M.S. Celik, Effect of roughness and shape factor on flotation characteristics of glass beads, Colloids Surf. A Physicochem. Eng. Aspects 492 (2016) 88-99.