Assessment of ultra-high tensile-strength polyurea for underground roof fall support: Insights from work of adhesion

Abstract

Underground mining often faces the threat of roof fall disaster. As a new type of supporting technology, thin spray-on liner (TSL) has gained an increasing attention in underground mining due to its notable tensile strength, elongation capability, and bond strength with rock surfaces. To evaluate the roof fall support performance of TSL based on a novel ultra-high tensile-strength polyurea, tensile adhesive strength between polyurea and rock substrates were tested under different thicknesses, curing conditions, substrate strength, primer and coating method. Meanwhile, this study proposed a new testing method for dynamic tensile adhesive strength between TSL material and rock. The results indicate that the adhesive strength is inversely proportional to the square root of the coating thickness. When the curing time exceeds 7 days, the adhesive strength remains relatively constant. As the curing temperature/humidity increases, the adhesive strength gradually increases. But when the humidity exceeds 70%, the adhesive strength significantly decreases. Since the soft rock has the tensile strength that even lower than the adhesive strength, polyurea-based TSL is more suitable for harder rock from the perspective of adhesive strength. The application of a primer significantly improves the tensile adhesive strength more than 10 MPa. When the coating thickness is less than 2 mm, the adhesive strength of sprayed polyurea is significantly higher than that of brushed polyurea. Dynamic adhesive strength exhibits an insignificant loading rate effect with DIF ranging from 1.05 to 1.34. Based on the adhesion results, a supporting model was established, assessing the capability of supporting roof loose rock mass by polyurea-based TSL.

Keywords

Rock support / Thin spray-on liner / Polyurea / Adhesion strength / Roof fall

CRediT authorship contribution statement

Bobin Hou: Writing - original draft, Data curation. Haozhe Xing: Writing - review & editing, Methodology, Funding acquisition. Songlin Yue: Resources. Zhongwei Zhang: Methodology. Yanqyu Qiu: Project administration. Mingyang Wang: Supervision.

Declaration of competing interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Acknowledgements

The work is supported by financial grants from the National Natural Science Foundation of China (No.12372378) and Natural Science Foundation of Jiangsu Province of China (No. BK20240201).

References

[1] Syd Peng, Roof bolting and underground roof falls, Geohazard Mechanics 1 (1) (2023) 32-37.

[2] Z.C. Li, B. Nocelli, S. Saydam, Effect of rock strength and surface roughness on adhesion strength of thin spray-on liners, Int. J. Rock Mech. Min. Sci. 91 (2017) 195-202.

[3] P. Mpunzi, R. Masethe, M. Rizwan, T.R. Stacey, Enhancement of the tensile strengths of rock and shotcrete by thin spray-on liners, Tunn. Undergr. Space Technol. 49 (2015) 369-375.

[4] T.R. Stacey, Review of membrane support mechanisms, loading mechanisms, desired membrane peformance and appropriate test methods, J. S. Afr. Inst. Min. Metall 101 (7) (2001) 343-351.

[5] D.F. Coates, Rock Mechanics Principles, Canada, 1970.

[6] Q. Ma, X.L. Liu, Y.L. Tan, Y. Wang, R. Wang, E. Wang, X. Liu, Z. Zhao, D. Ren, W. Xie, R. Qian, Hu N. Monitoring and evaluation of disaster risk caused by linkage failure and instability of residual coal pillar and rock strata in multi-coal seam mining, Geohazard Mechanics 1 (4) (2023) 297-307.

[7] B.B. Hou, H.Z. Xing, S.L. Yue, P. Fan, Y. Qiu, M. Wang, Laboratory investigation of rock pillar reinforcement against impact loading by using high-tensile-strength polyurea with different coating thicknesses, Tunn. Undergr. Space Technol. 154 (2024) 106075.

[8] H. Ozturk, D.D. Tannant, Influence of rock properties and environmental conditions on thin spray-on liner adhesive bond, Int. J. Rock Mech. Min. Sci. 48 (2011) 1196-1198.

[9] L. Chen, Z. Zhou, G. Liu, X. Cui, Effects of substrate materials and liner thickness on the adhesive strength of the novel thin spray-on liner, Adv. Mech. Eng. 12 (2) (2014).

[10] H. Ozturk, D.D. Tannant, Thin spray-on liner adhesive strength test method and effect of liner thickness on adhesion, Int. J. Rock Mech. Min. Sci. 47 (5) (2010) 808-815.

[11] Z.C. Li, S. Saydam, R. Mitra, D. Chalmers,Investigation on adhesion strength of thin spray-on liners in an underground coal mine, in:Proceedings of the 15th Coal Operators' Conference, 2015. Wollongong, Australia.

[12] Z. Zhang, X. Shi, X. Qiu, J. Ouyang, W. Wang, In situ tests comparing the support effects of thin spray-on liner and shotcrete on a roadway subjected to blasting, Rock Mech. Rock Eng. 57 (2024) 1669-1693.

[13] ISRM, Suggested methods for determining the strength of rock materials in triaxial compression, Int. J. Rock Mech. Min. Sci. Geomech. Abstracts 15 (2) (2003) 47-51.

[14] ASTM D7234-22, in: Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers, 2022.

[15] H. Yilmaz, Development of Testing Methods for Comparative Assessment of Thin Spray-on Liner (TSL) Shear and Tensile Properties, University of the Witwatersrand, Johannesburg, 2012, p. 191.

[16] A.A. Griffith. The phenomena of rupture and flow in solids. Philosophical Transactions of the Royal Society A. 221:163-198.

[17] K. Kendall, The adhesion and surface energy of elastic solids, J. Phys. Appl. Phys. 4 (1971) 1186.

[18] J.Y. Chung, M.K. Chaudhury, Soft and hard adhesion, J. Adhes. 81 (10-11) (2005) 1119-1145.

[19] F. Xu, Study on the Adhesion Performance of Polyurea Coatings for Metal Protection (Master's Thesis), Qingdao University of Technology, 2014.

[20] D.D. Tannant, Thin Spray-on Liners for Underground Rock Support, 2001.

[21] M. du Plessis, D.F. Malan, Investigating the use of polymer-modified cementitious thin spray-on liners as stope face support, Int. J. Rock Mech. Min. Sci. 142 (2021) 104728.