Frontiers of Architectural Research >

2013 , Vol. 2 >Issue 2: 121 - 133

DOI: https://doi.org/10.1016/j.foar.2013.02.003

RESEARCH ARTICLE

The simulation and mapping of building performance indicators based on European weather stations

  • A.W.M. van Schijndeln ,
  • H.L. Schellen
Expand
  • Built Environment BPS, Built Environment BPS, PO Box 513, Eindhoven University of Technology, Eindhoven 5600MB, Netherlands

Received date: 27 Feb 2013

Accepted date: 28 Feb 2013

Published date: 05 Jun 2013

Copyright

2014 This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Fold

Abstract

Due to the climate change debate, a lot of research and maps of external climate parameters are available. However, maps of indoor climate performance parameters are still lacking. This paper presents a methodology for obtaining maps of performances of similar buildings that are virtually spread over whole Europe. The produced maps are useful for analyzing regional climate influence on building performance indicators such as energy use and indoor climate. This is shown using the Bestest building as a reference benchmark. An important application of the mapping tool is the visualization of potential building measures over the EU. Also the performances of single building components can be simulated and mapped. It is concluded that the presented method is efficient as it takes less than 15 min to simulate and produce the maps on a 2.6 GHz/4 GB computer. Moreover, the approach is applicable for any type of building.

Key words： Mapping; Modeling; Building; Performance

Cite this article

A.W.M. van Schijndeln , H.L. Schellen . The simulation and mapping of building performance indicators based on European weather stations[J]. Frontiers of Architectural Research, 2013 , 2(2) : 121 -133 . DOI: 10.1016/j.foar.2013.02.003

Options
Outlines

/

〈 〉