RESEARCH ARTICLE

The influence of calculation error of hourly marine meteorological parameter on building energy consumption calculation

  • Dalong Liu ,
  • Tian Sun ,
  • Yufei Han ,
  • Xiuying Yan
Expand
  • School of Architecture, Xi’an University of Architecture and Technology, Xi’an 710055, China

Received date: 29 Nov 2021

Revised date: 19 Mar 2022

Accepted date: 23 Mar 2022

Published date: 31 Oct 2022

Copyright

2022 2022 Higher Education Press Limited Company. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Abstract

The ocean is a crucial area for future economic development. The marine environment has high energy-efficient and ecological requirements for building construction. Meteorological parameters are the key basis for the analysis and design of building energy efficiency. The lack of meteorological parameters for energy efficiency, particularly hourly data, under oceanic climatic conditions is a universal problem. The appropriate calculation methods of hourly meteorological parameters under oceanic climatic conditions are explored in this study. The impact of the calculation errors of the hourly meteorological parameters on building energy consumption is also analyzed. Three key meteorological parameters are selected: temperature, humidity, and wind speed. Five hourly calculations methods, including linear interpolation, cubic spline interpolation, pieceated three-Hermite interpolation, Akima interpolation, and radial basis function interpolation, are selected to calculate the error of the difference method, with Xiamen, Haikou, and Sanya as the locations of meteorological research. Appropriate interpolation methods are selected for the three parameters, and the seasonal and regional characteristics of the errors of each parameter are compared. Different interpolation methods should be selected for different meteorological parameters in different seasons. The error data of the three parameters of different magnitudes are constructed. A quantitative relationship between the sum of squares due to error of the three meteorological parameters and the rate of change of cooling energy consumption is established. The hourly calculation errors of meteorological parameters have an important impact on the calculation of dynamic energy consumption. The energy consumption differences caused by the errors of different parameters are significant. Obvious regional and seasonal differences also exist. This research strengthens the research foundation of building energy consumption calculation under oceanic climate conditions.

Cite this article

Dalong Liu , Tian Sun , Yufei Han , Xiuying Yan . The influence of calculation error of hourly marine meteorological parameter on building energy consumption calculation[J]. Frontiers of Architectural Research, 2022 , 11(5) : 981 -991 . DOI: 10.1016/j.foar.2022.03.007

1
Afrifa, Y.E., Mueller, U.A., Taylor, S.M., 2020. Missing data imputation of high-resolution temporal climate time series data. Meteorol. Appl. 27 (1), e1873.

DOI

2
Alexandru, M.B., 2012. Fitting data using optimal Hermite type cubic interpolating splines. Appl. Math. Lett. 25 (12), 2047–2051.

DOI

3
Ali, A., Mazyar, S., 2018. Filling missing meteorological data in heating and cooling seasons separately. Int. J. Climatol. 1–10.

4
Alvera, A.A., Barth, A., Rixen, M., 2005. Reconstruction of incomplete oceanographic data sets using empirical orthogonal functions: application to the Adriatic Sea surface temperature. Ocean Model. 9, 325–346.

DOI

5
Carbonell, D., Philippen, D., Granzotto, M., 2016. Simulation of a solar-ice system for heating applications. system validation with one-year of monitoring data. Energy Build. 127 (9), 846–858.

DOI

6
Eldrandaly, K.A., Abu-Zaid, M.S., 2011. Comparison of six GIS-based spatial interpolation methods for estimating air temperature in western Saudi Arabia. J. Environ. Inf. 18 (1), 38–45.

DOI

7
Gebhardt, C., Kusserow, B., Hense, A., 2000. Optimal averaging of incomplete climatological data. Theor. Appl. Climatol. 65 (3), 137–155.

DOI

8
Han, O.L., Dong, X., et al., 2021. Determination of HVAC meteorological parameters for floating nuclear power stations (FNPSs) in the area of China Sea and its vicinity. Energy 121084.

DOI

9
Jain, P., Flannigan, M.D., 2017. Comparison of methods for spatial interpolation of fire weather in Alberta, Canada. Can. J. For. Res. 47 (12), 1646–1658.

DOI

10
Li, B.Z., Yao, R.M., 2012. Building energy efficiency for sustainable development in China: challenges and opportunities. Build. Res. Inf. 40 (4), 417–431.

DOI

11
Liu, D.L., Wang, W.Q., Liu, J.P., 2017a. Sensitivity analysis of meteorological parameters on building energy consumption. Energy Proc. 132, 634–639.

DOI

12
Liu, Y., Stouffs, R., Tablada, A., 2017b. Comparing micro-scale weather data to building energy consumption in Singapore. Energy Build. 152, 776–791.

DOI

13
Lupato, G., Manzan, M., 2019. Italian TRYs: newweather data impact on building energy simulations. Energy Build. 185, 287–303.

DOI

14
Ma, Y.X., Yu, C., 2020. Impact of meteorological factors on high-rise office building energy consumption in Hong Kong: from a spatiotemporal perspective. Energy Build. 228, 110468.

DOI

15
Moritz, B.S., Bartz-Beielstein, T., 2015. ImputeTS: time series missing value imputation in R. R Journal 9 (1).

DOI

16
Nematchoua, M.K., Yvon, A., Kalameu, O., 2019. Impact of climate change on demands for heating and cooling energy in hospitals: an in-depth case study of six islands located in the Indian Ocean region. Sustain. Cities Soc. 44, 629–645.

DOI

17
Pieter, W., 2018. Building Performance Analysis. Wiley-Blackwell, New Jersey, pp. 3–15.

18
Pincetl, S., Graham, R., Murphy, S., 2016. Analysis of high-resolution utility data for understanding energy use in urban systems: the case of Los Angeles, California. J. Ind. Ecol. 20 (1), 166–178.

DOI

19
Rocha, H., Dias, J.M., 2019. Early prediction of durum wheat yield in Spain using radial basis functions interpolation models based on agroclimatic data. Comput. Electron. Agric. 157, 427–435.

DOI

20
Tsoka, S., Tolika, K., Theodosiou, T., et al., 2017. Evaluation of stochastically generated weather datasets for building energy simulation. Energy Proc. 122, 853–858.

DOI

21
Van, B.S., Groothuis, O.K., 2011. MICE: multivariate imputation by chained equations in R. J. Stat. Software 45, 1–67.

DOI

22
Wang, D., Zhang, Y., Zeng, L., 2009. Marine meteorology research progress of China from 2003 to 2006. Adv. Atmos. Sci. 26 (1), 17–30.

DOI

23
Yodah, W.O., Kihoro, J.M., Athiany, K.H.O., 2013. Imputation of incomplete non-stationary seasonal time series data. Math. Theor. Model. 3 (12), 142–154.

24
Yozgatligil, C., Aslan, S., Iyigun, C., Batmaz, I., 2013. Comparison of missing value imputation methods in time series: the case of Turkish meteorological data. Theor. Appl. Climatol. 112, 143–167.

DOI

Outlines

/