Urban geometry as a climate adaptation strategy for enhancing outdoor thermal comfort in a hot desert climate

Abstract

This study aimed to assess the impact of varying street canyon geometries on outdoor thermal comfort in two Egyptian cities with distinct climates: Aswan, located in the southern desert region, and Alexandria, on the northern coast. The design of urban street canyons in Egypt often neglects the country’s diverse climatic regions. The investigation focused on four height-to-width aspect ratios and four principal street orientations in the two cities. Field data, ENVI-met microclimate software, and RayMan were utilized to analyze the impact of hypothesized scenarios on heat stress in the studied street canyons. Outdoor thermal comfort was evaluated using the physiologically equivalent temperature (PET). The findings demonstrated the effectiveness of aspect ratio and orientation in the respective cities. In Aswan, the aspect ratio had a greater influence on comfort, with aspect ratio of 2.5 providing the most favorable conditions and a ratio of 1 resulting in the least comfortable conditions. Conversely, in Alexandria, the street canyon orientation proved more advantageous, where a northwest-southeast orientation produced a significant decrease (10 K) in PET compared to the least favorable orientation. These results highlight the importance of considering local climatic factors in the design of urban street canyons to effectively mitigate outdoor heat stress.

Keywords

Street canyons / Heat stress / Aspect ratio / PET / ENVI-met / Street orientation

References

[1] Abdallah, A.S.H., 2015. "The influence of urban geometry on thermal comfort and energy consumption in residential building of hot arid climate, Assiut, Egypt." Procedia Eng. 121, 158- 166.

[2] Abdallah, A.S.H., Mahmoud, R.M.A., 2022. "Urban morphology as an adaptation strategy to improve outdoor thermal comfort in urban residential community of new assiut city, Egypt." Sustain. Cities Soc. 78, 103648.

[3] Abdelhafez, M.H.H., Altaf, F., Alshenaifi, M., Hamdy, O., Ragab, A., 2022. "Achieving effective thermal performance of street canyons in various climatic zones." Sustainability 14 (17), 10780.

[4] Abdul Sami Eid, M., Hassan Hassan, M., Rajab Abdel Radi, A., Muhammad Othman, I.S., 2020. Evaluation of hybrid ventilation efficiency to improve the indoor air quality for patients’rooms in hospitals of Aswan city. JES. Journal of Engineering Sciences 48 (1), 154- 168.

[5] Ahmad, K., Khare, M., Chaudhry, K.K., 2005. Wind tunnel simulation studies on dispersion at urban street canyons and inter-sections—a review. J. Wind Eng. Ind. Aerod. 93 (9), 697- 717.

[6] Ali-Toudert, F., Mayer, H., 2007. Effects of asymmetry, galleries, overhanging facades and vegetation on thermal comfort in urban street canyons. Sol. Energy 81 (6), 742- 754.

[7] Andrade, H., Alcoforado, M.J., 2008. Microclimatic variation of thermal comfort in a district of Lisbon (Telheiras) at night. Theor. Appl. Climatol. 92, 225- 237.

[8] Attia, S., Shafik, Z., Ibrahim, A., 2019. New Cities and Community Extensions in Egypt and the Middle East. Springer, pp. 1-18.

[9] Bechtel, B., Alexander, P.J., Böhner, J., Ching, J., Conrad, O., Feddema, J., Stewart, I., 2015. Mapping local climate zones for a worldwide database of the form and function of cities. ISPRS Int. J. Geo-Inf. 4 (1), 199- 219.

[10] Bourbia, F., Awbi, H.B., 2004. Building cluster and shading in urban canyon for hot dry climate: Part 1: air and surface temperature measurements. Renew. Energy 29 (2), 249- 262.

[11] Deng, J.Y., Wong, N.H., 2020. Impact of urban canyon geometries on outdoor thermal comfort in central business districts. Sustain. Cities Soc. 53, 101966.

[12] Elgheznawy, D., Eltarabily, S., 2021. The impact of sun sail-shading strategy on the thermal comfort in school courtyards. Build. Environ. 202, 108046.

[13] Elnabawi, M.H., Hamza, N., Raveendran, R., 2023. "Super cool roofs": mitigating the UHI effect and enhancing urban thermal comfort with high albedo-coated roofs. Results in Engineering 19, 101269.

[14] Emmanuel, R., Johansson, E., 2006. Influence of urban morphology and sea breeze on hot humid microclimate: the case of Colombo, Sri Lanka. Clim. Res. 30 (3), 189- 200.

[15] Fahmy, M., Sharples, S., 2009. On the development of an urban passive thermal comfort system in Cairo, Egypt. Build. Environ. 44 (9), 1907- 1916.

[16] Galal, O.M., Sailor, D.J., Mahmoud, H., 2020. The impact of urban form on outdoor thermal comfort in hot arid environments during daylight hours, case study: new Aswan. Build. Environ. 184, 107222.

[17] Ghaffarianhoseini, A., Berardi, U., Ghaffarianhoseini, A., Al-Obaidi, K., 2019. Analyzing the thermal comfort conditions of outdoor spaces in a university campus in Kuala Lumpur, Malaysia. Sci. Total Environ. 666, 1327- 1345.

[18] Gomaa, M.M., El Menshawy, A., Nabil, J., Ragab, A., 2024. Investigating the impact of various vegetation scenarios on outdoor thermal comfort in low-density residential areas of hot arid regions. Sustainability 16 (10), 3995.

[19] Hegazy, I.R., Qurnfulah, E.M., 2020. Thermal comfort of urban spaces using simulation tools exploring street orientation influence of on the outdoor thermal comfort: a case study of Jeddah, Saudi Arabia. Int. J. Low Carbon Technol. 15 (4), 594- 606.

[20] Herrmann, J., Matzarakis, A., 2012. Mean radiant temperature in idealised urban canyons—examples from Freiburg, Germany. Int. J. Biometeorol. 56, 199- 203.

[21] Hong, T., Kim, J., Jeong, J., Lee, M., Ji, C., 2017. Automatic calibration model of a building energy simulation using optimization algorithm. Energy Proc. 105, 3698- 3704.

[22] Höppe, P., 1999. The physiological equivalent temperature—a universal index for the biometeorological assessment of the thermal environment. Int. J. Biometeorol. 43, 71- 75.

[23] Huang, K.T., Yang, S.R., Matzarakis, A., Lin, T.P., 2018. Identifying outdoor thermal risk areas and evaluation of future thermal comfort concerning shading orientation in a traditional settlement. Sci. Total Environ. 626, 567- 580.

[24] Johansson, E., Thorsson, S., Emmanuel, R., Krüger, E., 2014. Instruments and methods in outdoor thermal comfort studies—the need for standardization. Urban Clim. 10, 346- 366.

[25] Kim, J., Hong, T., Koo, C.W., 2012. Economic and environmental evaluation model for selecting the optimum design of green roof systems in elementary schools. Environ. Sci. Technol. 46 (15), 8475- 8483.

[26] Lin, T.P., Matzarakis, A., Hwang, R.L., 2010. Shading effect on long-term outdoor thermal comfort. Build. Environ. 45 (1), 213- 221.

[27] Mahmoud, A.R., 2022. The influence of buildings proportions and orientations on energy demand for cooling in hot arid climate. SVU-International Journal of Engineering Sciences and Applications 3 (1), 8- 20.

[28] Mahmoud, A.R.A., Aly, A.M., Hassan, M.H., 2015. Evaluating the thermal performance of urban spaces in aswan city “a case study of saad zaghloul street. JES. Journal of Engineering Sciences 43 (5), 766- 782.

[29] Mahmoud, H., Ghanem, H., Sodoudi, S., 2021. Urban geometry as an adaptation strategy to improve the outdoor thermal performance in hot arid regions: aswan University as a case study. Sustain. Cities Soc. 71, 102965.

[30] Mahmoud, H., Ragab, A., 2019. Thermal performance evaluation of unshaded courtyards in Egyptian arid regions. Smart and Sustainable Planning for Cities and Regions: Results of SSPCR 2019 3, 109- 121.

[31] Mahmoud, H., Ragab, A., 2020a. Impact of urban geometry on cooling loads in Egypt: case study: a social residential compound in New Aswan city. In: 2020 9th International Conference on Power Science and Engineering (ICPSE). IEEE, pp. 71-75.

[32] Mahmoud, H., Ragab, A., 2020b. Urban geometry optimization to mitigate climate change: towards energy-efficient buildings. Sustainability 13 (1), 27.

[33] Matzarakis, A., Rutz, F., Mayer, H., 2010. Modelling radiation fluxes in simple and complex environments: basics of the RayMan model. Int. J. Biometeorol. 54, 131- 139.

[34] MAYER, F.A.T.H., 2006. Effects of street design on outdoor thermal comfort. Landscape, Environment and Society 45.

[35] Middel, A., Häb, K., Brazel, A.J., Martin, C.A., Guhathakurta, S., 2014. Impact of urban form and design on mid-afternoon microclimate in Phoenix Local Climate Zones. Landsc. Urban Plann. 122, 16- 28.

[36] Muniz-Gäal, L.P., Pezzuto, C.C., de Carvalho, M.F.H., Mota, L.T.M., 2020. Urban geometry and the microclimate of street canyons in tropical climate. Build. Environ. 169, 106547.

[37] Nasrollahi, N., Namazi, Y., Taleghani, M., 2021. The effect of urban shading and canyon geometry on outdoor thermal comfort in hot climates: a case study of Ahvaz, Iran. Sustain. Cities Soc. 65, 102638.

[38] Ragab, A., Abdelrady, A., 2020. Impact of green roofs on energy demand for cooling inEgyptian buildings. Sustainability 12 (14), 5729.

[39] Roshan, G., Moghbel, M., Attia, S., 2020. Evaluating the wind cooling potential on outdoor thermal comfort in selected Iranian climate types. J. Therm. Biol. 92, 102660.

[40] Sharmin, T., Steemers, K., Matzarakis, A., 2017. Microclimatic modelling in assessing the impact of urban geometry on urban thermal environment. Sustain. Cities Soc. 34, 293- 308.

[41] Targhi, M.Z., Van Dessel, S., 2015. Potential contribution of urban developments to outdoor thermal comfort conditions: the influence of urban geometry and form in Worcester, Massachusetts, USA. Procedia Eng. 118, 1153- 1161.

[42] Yahia, M.W., Johansson, E., 2013a. Evaluating the behaviour of different thermal indices by investigating various outdoor urban environments in the hot dry city of Damascus, Syria. Int. J. Biometeorol. 57, 615- 630.

[43] Yahia, M.W., Johansson, E., 2013b. Influence of urban planning regulations on the microclimate in a hot dry climate: the example of Damascus, Syria. J. Hous. Built Environ. 28, 51- 65.

RIGHTS & PERMISSIONS

The Author(s). Publishing services by Elsevier B.V. on behalf of Higher Education Press and KeAi.