Pyrochlore La₂Zr_2–xNi_xO₇ anodes for direct ammonia solid oxide fuel cells

Abstract

Developing efficient anode catalysts for direct ammonia solid oxide fuel cells (NH₃-SOFCs) under intermediate-temperatures is of great importance, in support of hydrogen economy via ammonia utilization. In the present work, the pyrochlore-type La₂Zr_2–xNi_xO_7+δ (LZN_x, x = 0, 0.02, 0.05, 0.08, 0.10) oxides were synthesized as potential anode catalysts of NH₃-SOFCs due to the abundant Frankel defect that contributes to the good conductivity and oxygen ion mobility capacity. The effects of different content of Ni²⁺ doping on the crystal structure, surface morphology, thermal matching with YSZ (Yttria-stabilized zirconia), conductivity, and electrochemical performance of pyrochlore oxides were examined using different characterization techniques. The findings indicate that the LZN_x oxide behaves as an n-type semiconductor and exhibits an excellent high-temperature chemical compatibility and thermal matching with the YSZ electrolyte. Furthermore, LZN_0.05 exhibits the smallest conductive band potential and bandgap, making it have a higher power density as anode material for NH₃-SOFCs compared to other anodes. As a result, the maximum power density of the LZN_0.05-40YSZ composite anode reaches 100.86 mW/cm² at 800 °C, which is 1.8 times greater than that of NiO-based NH₃-SOFCs (56.75 mW/cm²) under identical flow rate and temperature conditions. The extended durability indicates that the NH₃-SOFCs utilizing the LZN_0.05-40YSZ composite anode exhibits a negligible voltage degradation following uninterrupted operation at 800 °C for 100 h.

Graphical abstract

Keywords

anode catalyst / ammonia oxidation / Ni particles / NH₃-SOFCs

References

[1] Ni M, Leung M, Leung Y C. Ammonia-fed solid oxide fuel cells for power generation—A review. International Journal of Energy Research, 2009, 33(11): 943–959

[2] Ni M, Leung M, Sumathy K. . Potential of renewable hydrogen production for energy supply in Hong Kong. International Journal of Hydrogen Energy, 2006, 31(10): 1401–1412

[3] Dodds P E, Staffell I, Hawkes A D. . Hydrogen and fuel cell technologies for heating: A review. International Journal of Hydrogen Energy, 2015, 40(5): 2065–2083

[4] Estevez R, López-Tenllado F J, Aguado-Deblas L. . Current research on green ammonia (NH₃) as a potential vector energy for power storage and engine fuels: A review. Energies, 2023, 16(14): 5451–5484

[5] Zheng Y, Zhao C, Wu T. . Enhanced oxygen reduction kinetics by a porous heterostructured cathode for intermediate temperature solid oxide fuel cells. Energy and AI, 2020, 2: 100027

[6] Zhang M, Hashinokuchi M, Yokochi R. . Effect of Infiltrated transition metals in Ni/Sm-doped CeO₂ cermets anode in direct NH₃-fueled SOFCs. ECS Transactions, 2017, 78(1): 1517–1522

[7] Jia X, Lu F, Liu K. . Improved performance of IT-SOFC by negative thermal expansion Sm_0.85Zn_0.15MnO₃ addition in Ba_0.5Sr_0.5Fe_0.8Cu_0.1Ti_0.1O₃-cathode. Journal of Physics Condensed Matter, 2022, 34(18): 184001

[8] Bi L, Fabbri E, Traversa E. Solid oxide fuel cells with proton-conducting La_0.99Ca_0.01NbO₄ electrolyte. Electrochimica Acta, 2018, 260: 748–754

[9] Lee J G, Park J H, Shul Y G. Tailoring gadolinium-doped ceria-based solid oxide fuel cells to achieve 2 W/cm² at 550 °C. Nature Communications, 2014, 5(1): 4045

[10] Winter C J. Hydrogen energy—Abundant, efficient, clean: A debate over the energy-system-of-change. International Journal of Hydrogen Energy, 2009, 34(14): S1–S52

[11] Song Y, Li H, Xu M. . Infiltrated NiCo alloy nanoparticle decorated perovskite oxide: A highly active, stable, and antisintering anode for direct-ammonia solid oxide fuel cells. Small, 2020, 16(28): 2001859

[12] Zheng Y, Li Y, Wu T. . Controlling crystal orientation in multilayered heterostructures toward high electro-catalytic activity for oxygen reduction reaction. Nano Energy, 2019, 62: 521–529

[13] Lu L, Liu Y, Zhang H. . Exploring the potential of triple conducting perovskite cathodes for high-performance solid oxide fuel cells: A comprehensive review. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2023, 11(44): 23613–23639

[14] Jensen J O, Vestbø A P, Li Q, et al. The energy efficiency of onboard hydrogen storage. Journal of Alloys and Compounds, 2007, 446–447: 723–728 10.1016/j.jallcom.2007.04.051

[15] Li F, Li Y, Chen H. . Impact of strain-induced changes in defect chemistry on catalytic activity of Nd₂NiO_4+δ electrodes. ACS Applied Materials & Interfaces, 2018, 10: 36926–36932

[16] Molouk A, Yang J, Okanishi T. . Comparative study on ammonia oxidation over Ni-based cermet anodes for solid oxide fuel cells. Journal of Power Sources, 2016, 305: 72–79

[17] Hashinokuchi M, Zhang M, Yokochi R. . Enhanced activity and stability of Ni-based binary anode in direct NH₃-fueled SOFCs. ECS Transactions, 2017, 78(1): 1495–1500

[18] Zheng Y, Zhao C, Li Y. . Directly visualizing and exploring local heterointerface with high electro-catalytic activity. Nano Energy, 2020, 78: 105236

[19] Teramoto K, Iwai H, Kishimoto M. . Direct reforming of methane-ammonia mixed fuel on Ni-YSZ anode of solid oxide fuel cells. International Journal of Hydrogen Energy, 2020, 45(15): 8965–8974

[20] Li Y, Zhang W, Wu T, et al. Segregation induced self-assembly of highly active perovskite for rapid oxygen reduction reaction. Advanced Energy Materials, 2018: 1801893 10.1002/aenm.201801893

[21] Fuerte A, Valenzuela R X, Escudero M J. . Ammonia as efficient fuel for SOFC. Journal of Power Sources, 2009, 192(1): 170–174

[22] Wang W, Su C, Wu Y. . Progress in solid oxide fuel cells with nickel-based anodes operating on methane and related fuels. Chemical Reviews, 2013, 113(10): 8104–8151

[23] Cao J, Li Y, Zheng Y. . A novel solid oxide electrolysis cell with micro-/nano channel anode for electrolysis at ultra-high current density over 5 A/cm². Advanced Energy Materials, 2022, 12: 2200899

[24] Brightman E, Ivey D G, Brett D J L. . The effect of current density on H₂S-poisoning of nickel-based solid oxide fuel cell anodes. Journal of Power Sources, 2011, 196(17): 7182–7187

[25] Molouk A, Yang J, Okanishi T. . Electrochemical and catalytic behavior of Ni-based cermet anode for ammonia-fueled SOFCs. ECS Transactions, 2015, 68(1): 2751–2762

[26] Kahlenberg V, Böhm H. X-ray diffraction investigation of the defect pyrochlore Bi_1.61Zn_0.18Ti_1.94V_0.06O_6.62. Journal of Alloys and Compounds, 1995, 223(1): 142–146

[27] Xu J, Peng L, Fang X. . Developing reactive catalysts for low temperature oxidative coupling of methane: On the factors deciding the reaction performance of Ln₂Ce₂O₇ with different rare earth A sites. Applied Catalysis A, General, 2018, 552: 117–128

[28] Matsumoto M, Aoyama K, Matsubara H. . Thermal conductivity and phase stability of plasma sprayed ZrO₂-Y₂O₃-La₂O₃ coatings. Surface and Coatings Technology, 2005, 194(1): 31–35

[29] Guo Y, He W, Guo H. Thermal-physical and mechanical properties of Yb₂O₃ and Sc₂O₃ co-doped Gd₂Zr₂O₇ ceramics. Ceramics International, 2020, 46(11): 18888–18894

[30] Mizusaki J, Yoshihiro M, Yamauchi S. . Nonstoichiometry and defect structure of the perovskite-type oxides La_1–xSr_xFeO₃. Journal of Solid State Chemistry, 1985, 58(2): 257–266

[31] Shimamura K, Arima T, Idemitsu K. . Thermophysical properties of rare-earth-stabilized zirconia and zirconate pyrochlores as surrogates for actinide-doped zirconia. International Journal of Thermophysics, 2007, 28(3): 1074–1084

[32] Glerup M, Nielsen O F, Poulsen F W. The structural transformation from the pyrochlore structure A₂B₂O₇ to the fluorite structure AO₂ studied by Raman spectroscopy and defect chemistry modeling. Journal of Solid State Chemistry, 2001, 160(1): 25–32

[33] Mandal B, Krishna P, Tyagi A. Order–disorder transition in the Nd_2−yY_yZr₂O₇ system: Probed by X-ray diffraction and Raman spectroscopy. Journal of Solid State Chemistry, 2010, 183(1): 41–45

[34] Kong L, Karatchevtseva I, Gregg D J. . A novel chemical route to prepare La₂Zr₂O₇ pyrochlore. Journal of the American Ceramic Society, 2013, 96(3): 935–941

[35] Lü S, Zhu Y, Fu X. . A-site deficient Fe-based double perovskite oxides Pr_xBaFe₂O_5+δ as cathodes for solid oxide fuel cells. Journal of Alloys and Compounds, 2022, 911: 165002

[36] Feng J, Xiao B, Zhou R. . Thermal expansion and conductivity of RE₂Sn₂O₇ (RE = La, Nd, Sm, Gd, Er and Yb) pyrochlores. Scripta Materialia, 2013, 69(5): 401–404

[37] Fan Q, Zhang F, Wang F. . Molecular dynamics calculation of thermal expansion coefficient of a series of rare-earth zirconates. Computational Materials Science, 2009, 46(3): 716–719

[38] Miller R A. Thermal barrier coatings for aircraft engines: History and directions. Journal of Thermal Spray Technology, 1997, 6: 35–42

[39] Stefaniuk I. Electron paramagnetic resonance study of impurities and point defects in oxide crystals. Opto-Electronics Review, 2018, 26(2): 81–91

[40] Wang W, Yang Y, Huan D. . An excellent OER electrocatalyst of cubic SrCoO_3–δ prepared by a simple F-doping strategy. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2019, 7(20): 12538–12546

[41] Araya T, Jia M, Yang J. . Resin modified MIL-53 (Fe) MOF for improvement of photocatalytic performance. Applied Catalysis B: Environmental, 2017, 203: 768–777

[42] Zhao W, Zhao W, Zhu G. . Black strontium titanate nanocrystals of enhanced solar absorption for photocatalysis. CrystEngComm, 2015, 17(39): 7528–7534

[43] Wang W, Chen X, Liu G, et al. Monoclinic dibismuth tetraoxide: A new visible-light-driven photocatalyst for environmental remediation. Applied Catalysis B: Environmental, 2015, 176–177: 444–453 10.1016/j.apcatb.2015.04.026

[44] Yu J C, Yu J, Ho W. . Effects of F-doping on the photocatalytic activity and microstructures of nanocrystalline TiO₂ powders. Chemistry of Materials, 2002, 14(9): 3808–3816

[45] Hasan M, Arshad M, Ali A. . Mg and La co-doped ZnNi spinel ferrites for low resistive applications. Materials Research Express, 2018, 6(1): 016302

[46] Cherepanov V, Aksenova T, Gavrilova L Y. . Structure, nonstoichiometry and thermal expansion of the NdBa(Co,Fe)₂O_5+δ layered perovskite. Solid State Ionics, 2011, 188(1): 53–57

[47] Liu H, Yu J. Catalytic performance of Cu-Ni/La_0.75Sr_0.25Cr_0.5Mn_0.5O_3–δ for dry methane reforming. International Journal of Energy Research, 2022, 46(8): 10522–10534

[48] Kim J H, Manthiram A. LnBaCo₂O_5+δ oxides as cathodes for intermediate-temperature solid oxide fuel cells. Journal of the Electrochemical Society, 2008, 155(4): B385–B390

[49] Miyazaki K, Okanishi T, Muroyama H. . Development of Ni-Ba(Zr,Y)O₃ cermet anodes for direct ammonia-fueled solid oxide fuel cells. Journal of Power Sources, 2017, 365: 148–154

[50] Yang J, Akagi T, Okanishi T. . Catalytic influence of oxide component in Ni-based cermet anodes for ammonia-fueled solid oxide fuel cells. Fuel Cells, 2015, 15(2): 390–397

[51] Meng G, Jiang C, Ma J. . Comparative study on the performance of a SDC-based SOFC fueled by ammonia and hydrogen. Journal of Power Sources, 2007, 173(1): 189–193

[52] Wang B, Li T, Gong F. . Ammonia as a green energy carrier: Electrochemical synthesis and direct ammonia fuel cell—A comprehensive review. Fuel Processing Technology, 2022, 235: 107380

[53] Sharma R K, Burriel M, Dessemond L. . Design of interfaces in efficient Ln₂NiO_4+δ (Ln = La, Pr) cathodes for SOFC applications. Journal of Materials Chemistry. A, Materials for Energy and Sustainability, 2016, 4(32): 12451–12462

[54] Huang Q A, Hui R, Wang B. . A review of AC impedance modeling and validation in SOFC diagnosis. Electrochimica Acta, 2007, 52(28): 8144–8164

[55] Bian L, Duan C, Wang L. . Electrochemical performance and stability of La_0.5Sr_0.5Fe_0.9Nb_0.1O_3–δ symmetric electrode for solid oxide fuel cells. Journal of Power Sources, 2018, 399: 398–405

RIGHTS & PERMISSIONS

Higher Education Press 2024