Plasma spray coating on interconnector toward promoted solid oxide fuel cells and solid oxide electrolysis cells

Abstract

Interconnector is a critical component to construct solid oxide cells (SOCs) stack. Oxidation of metallic interconnectors and Cr poisoning caused by oxidation are important factors that lead to long-term performance degradation of SOCs. Coating on the interconnector surface is an important approach to inhibit the oxidation and Cr migration of the interconnector. Herein, (La_0.75Sr_0.25)_0.95MnO_3–δ (LSM) and Mn_1.5Co_1.5O₄ (MCO) are used to fabricate the coatings of interconnector. Two advanced thermal spray technology, atmospheric plasma spraying (APS) and low-pressure plasma spray (LPPS), are adopted for the coating preparation. The electrochemical performance, rising and cooling cycle stability, and Cr diffusion inhibition performance of the coatings are tested and evaluated. The result indicates that MCO can generate more uniform and denser coatings than LSM. In addition, MCO coatings prepared by LPPS shows the best electrochemical performance, rising and cooling cycle stability, and Cr diffusion inhibition. The initial area specific resistance (ASR) is 0.0027 Ω·cm² at 800 °C. After 4 cooling cycle tests, the ASR increases to 0.0032 Ω·cm² but lower than other samples. Meanwhile, the relative intense of Cr at the interface of SUS430 with MCO coatings fabricated by LPPS is lower than that of MCO fabricated by APS after 4 rising and cooling cycle operations, showing more favorable Cr diffusion inhibition performance.

Graphical abstract

Keywords

interconnector coating / plasma spray / electrochemical performance / Cr diffusion inhibition / solid oxide cells (SOCs)

References

[1] Hauch A, Kungas R, Blennow P. . Recent advances in solid oxide cell technology for electrolysis. Science, 2020, 370(6513): eaba6118

[2] Zhao C, Li Y, Zhang W. . Heterointerface engineering for enhancing the electrochemical performance of solid oxide cells. Energy & Environmental Science, 2020, 13(1): 53–85

[3] Zheng Y, Chen Z, Zhang J. Solid oxide electrolysis of H₂O and CO₂ to produce hydrogen and low-carbon fuels. Electrochemical Energy Reviews, 2021, 4(3): 508–517

[4] Connor P A, Yue X, Savaniu C D. . Tailoring SOFC electrode microstructures for improved performance. Advanced Energy Materials, 2018, 8(23): 1800120

[5] Jacobs R, Mayeshiba T, Booske J. . Material discovery and design principles for stable, high activity perovskite cathodes for solid oxide fuel cells. Advanced Energy Materials, 2018, 8(11): 1702708

[6] Duan C, Kee R J, Zhu H. . Highly durable, coking and sulfur tolerant, fuel-flexible protonic ceramic fuel cells. Nature, 2018, 557(7704): 217–222

[7] Zheng Y, Zhao C, Wu T. . Enhanced oxygen reduction kinetics by a porous heterostructured cathode for intermediate temperature solid oxide fuel cells. Energy and AI, 2020, 2: 100027

[8] Zheng Y, Zhao C, Li Y. . Directly visualizing and exploring local heterointerface with high electro-catalytic activity. Nano Energy, 2020, 78: 105236

[9] Cao J, Li Y, Zheng Y. . A novel solid oxide electrolysis cell with micro-/nano channel anode for electrolysis at ultra-high current density over 5 A·cm⁻². Advanced Energy Materials, 2022, 12(28): 2200899

[10] Li T, Wang T, Wei T. . Robust anode-supported cells with fast oxygen release channels for efficient and stable CO₂ electrolysis at ultrahigh current densities. Small, 2021, 17(6): 2007211

[11] Zhu J, Zhang W, Li Y. . Enhancing CO₂ catalytic activation and direct electroreduction on in-situ exsolved Fe/MnO_x nanoparticles from (Pr,Ba)₂Mn_2–yFe_yO_5+δ layered perovskites for SOEC cathodes. Applied Catalysis B: Environmental, 2020, 268: 118389

[12] Hassan M A, Mamat O B, Mehdi M. Review: Influence of alloy addition and spinel coatings on Cr-based metallic interconnects of solid oxide fuel cells. International Journal of Hydrogen Energy, 2020, 45(46): 25191–25209

[13] Sreedhar I, Agarwal B, Goyal P. . An overview of degradation in solid oxide fuel cells—Potential clean power sources. Journal of Solid State Electrochemistry, 2020, 24(6): 1239–1270

[14] Shaigan N, Qu W, Ivey D G. . A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects. Journal of Power Sources, 2010, 195(6): 1529–1542

[15] Sreedhar I, Agarwal B, Goyal P. . Recent advances in material and performance aspects of solid oxide fuel cells. Journal of Electroanalytical Chemistry, 2019, 848: 113315

[16] Aznam I, Mah J C W, Muchtar A. . A review of key parameters for effective electrophoretic deposition in the fabrication of solid oxide fuel cells. Journal of Zhejiang University. Science A, 2018, 19(11): 811–823

[17] Reisert M, Aphale A, Singh P. Solid oxide electrochemical systems: material degradation processes and novel mitigation approaches. Materials, 2018, 11(11): 2169

[18] Yang Z, Guo M, Wang N. . A short review of cathode poisoning and corrosion in solid oxide fuel cell. International Journal of Hydrogen Energy, 2017, 42(39): 24948–24959

[19] Zhu J H, Ghezel-Ayagh H. Cathode-side electrical contact and contact materials for solid oxide fuel cell stacking: A review. International Journal of Hydrogen Energy, 2017, 42(38): 24278–24300

[20] Niu Y, Zhou Y, Lv W. . Enhancing oxygen reduction activity and Cr tolerance of solid oxide fuel cell cathodes by a multiphase catalyst coating. Advanced Functional Materials, 2021, 31(19): 2100034

[21] Li F, Zhang P, Zhao Y. . The preparation and properties of Mn–Co–O spinel coating for SOFC metallic interconnect. International Journal of Hydrogen Energy, 2023, 48(42): 16048–16056

[22] Bushuev A, El’Kin O, Tolstobrov I. . Development of SOFC interconnects based on industrial steels with oxide coating. Energies, 2023, 16(3): 1237

[23] Tomas M, Visibile A, Svensson J E. . Novel coatings for protecting solid oxide fuel cell interconnects against the dual-atmosphere effect. International Journal of Hydrogen Energy, 2023, 48(48): 18405–18419

[24] Chen J, Lin K, Yang Y. . Plasma-sprayed LSM protective coating on metallic interconnect of SOFC. Coatings, 2017, 7(12): 226

[25] Jin Y, Hao G, Guo M. . Ce-doped (Mn,Co)₃O₄ coatings for solid oxide fuel cell interconnect applications. Ceramics International, 2022, 48(23): 34931–34939

[26] Jin Y, Sheng J, Hao G. . Highly dense (Mn,Co)₃O₄ spinel protective coating derived from Mn–Co metal precursors for SOFC interconnect applications. International Journal of Hydrogen Energy, 2022, 47(29): 13960–13968

[27] Zhao Y, Zhang S, Su M. . In-situ formed CuFe₂O₄ spinel coating by electroplating method for solid oxide fuel cell interconnect. Chemical Engineering Journal, 2023, 470: 144397

[28] Mu J, Geng S, Zhu H. . (Cu, Fe)₃O₄ spinel coating thermally converted from Cu–Fe₂O₃ composite on steel interconnect via electrophoresis-electroplating. High Temperature Corrosion of Materials, 2023, 99(3–4): 267–277

[29] Liu D, Geng S, Chen G. . NiO/NiFe₂O₄ dual-layer coating on pre-oxidized SUS430 steel interconnect. International Journal of Hydrogen Energy, 2022, 47(50): 21462–21471

[30] Irankhah R, Raissi B, Maghsoudipour A. . NiFe₂O₄ spinel protection coating for high-temperature solid oxide fuel cell interconnect application. Journal of Materials Engineering and Performance, 2016, 25(4): 1515–1525

[31] Zhao M, Geng S, Chen G. . Sputtered Fe_1.5CoNi_0.5 coating: An improved protective coating for SOFC interconnect applications. International Journal of Hydrogen Energy, 2022, 47(22): 11658–11668

[32] Yuan K, Zhu J, Dong W. . Applying low-pressure plasma spray (LPPS) for coatings in low-temperature SOFC. International Journal of Hydrogen Energy, 2017, 42(34): 22243–22249

[33] Lowrance Y N, Azmi M A, Rahman H A. . Influence of electrophoretic deposition (EPD) voltage on SOFC interconnect morphology. Key Engineering Materials, 2022, 908: 555–562

[34] Norouzi A, Soltanieh M, Rastegari S. An electrophoretic co-deposition of metal oxides followed by in-situ copper manganese spinel synthesis on AISI-430 for application in SOFC interconnects. International Journal of Hydrogen Energy, 2022, 47(31): 14346–14360

[35] Laicher A, Profitlich T, Schwitzer K. Spray-granulation and drying of granules in a new universal processing unit on the production scale. Die Pharmazeutische Industrie, 1994, 56(3): 276–281

RIGHTS & PERMISSIONS

Higher Education Press