Failure mode investigation of fuel cell for vehicle application

Abstract

The durability of proton exchange membrane fuel cells (PEMFCs) has been posing a key technical challenge to commercial spread of fuel cell vehicles (FCVs). To improve the durability, it is necessary to optimize the fuel cell system (FCS) design against failure modes. The fuel cell durability research method at FCS scale was exhibited, and the failure modes of fuel cell were experimentally investigated in this paper. It is found that the fuel cell dry operation, start/stop cycle and gas diffusion layer (GDL) flooding are typical failure modes of fuel cells. After the modifications against the failure modes, the durability of FCSs is improved to over 3000 h step by step.

Graphical abstract

Keywords

proton exchange membrane fuel cell (PEMFC) / fuel cell system (FCS) / durability / failure mode / fuel cell vehicle (FCV) / carbon corrosion / water management

References

[1] The department of energy hydrogen and fuel cells program plan. 2011–09

[2] Strategic Advisory Committee on Technology Roadmap for Energy Saving and New Energy Vehicles, Chinese Society of Automotive Engineering. Technology Roadmap for Energy Saving and New Energy Vehicles. Beijing: China Machine Press, 2016

[3] Borup R, Meyers J, Pivovar B, Kim Y S, Mukundan R, Garland N, Myers D, Wilson M, Garzon F, Wood D, Zelenay P, More K, Stroh K, Zawodzinski T, Boncella J, McGrath J E, Inaba M, Miyatake K, Hori M, Ota K, Ogumi Z, Miyata S, Nishikata A, Siroma Z, Uchimoto Y, Yasuda K, Kimijima K I, Iwashita N. Scientific aspects of polymer electrolyte fuel cell durability and degradation. Chemical Reviews, 2007, 107(10): 3904–3951

[4] Wu J F, Yuan X Z, Martin J J, Wang H, Zhang J, Shen J, Wu S, Merida W. A review of PEM fuel cell durability: degradation mechanisms and mitigation strategies. Journal of Power Sources, 2008, 184(1): 104–119

[5] Knights S D, Colbow K M, St-Pierre J, Wilkinson D P. Aging mechanisms and lifetime of PEFC and DMFC. Journal of Power Sources, 2004, 127(1–2): 127–134

[6] Wang J Y. System integration, durability and reliability of fuel cells: challenges and solutions. Applied Energy, 2017, 189: 460–479

[7] Hou Z J, Gan Q, Ma Y Q, Lin Y, Wang K, Yan X, Lin B, Ming P. Study on durability of the fuel cell power system for the bus application. Journal of Mechanical Engineering, 2010, 46(6): 39–43

[8] Hou Z J, Jiang H C, Wang R F, Hu J, Ma Y Q, Wang K Y, Yan X Q, Qi P, Ming P W. Performance stability of fuel cell engine applied in the fuel cell car demonstration. Journal of Jilin University (Engineering and Technology Edition), 2011, 41(S2): 131–136

[9] Yun H T, Zhong Z M, Sun Z C. Modeling and simulation of fuel cell car powertrain. Shanghai Auto, 2006, 3: 4–6

[10] Chen P, Gan P, Huang C D. Fuel cell system development for plug-in FCV. Shanghai Auto, 2011, 1: 3–8

[11] Reiser C A, Bregoli L, Patterson T W, Yi J S, Yang J D, Perry M L, Jarvi T D. A reverse-current decay mechanism for fuel cells. Electrochemical and Solid-State Letters, 2005, 8(6): A273–A276

[12] Taniguchi A, Akita T, Yasuda K, Miyazaki Y. Analysis of electrocatalyst degradation in PEMFC caused by cell reversal during fuel starvation. Journal of Power Sources, 2004, 130(1–2): 42–49

[13] St-Pierre J, Wilkinson D P, Knights S, Bos M L. Relationships between water management, contamination and lifetime degradation in PEFC. Journal of New Materials for Electrochemical Systems, 2000, 3(2): 99–106

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg