Prediction of the theoretical and semi-empirical model of ambient temperature

Abstract

It is well known that the ambient temperature is a sensitive parameter which has a great effect on biology, technology, geology and even on human behavior. A prediction is a statement about an uncertain event. It is often, but not always, based upon experience or knowledge. Although guaranteed accurate information about the future is in many cases impossible, prediction can be useful to assist in making plans about possible developments. As a result, temperature profiles can be developed which accurately represent the expected ambient temperature exposure that this environment experiences during measurement. The ambient temperature over time is modeled based on the previous T_min and T_max data and using a Lagrange interpolation. To observe the comprehensive variation of ambient temperature the profile must be determined numerically. The model proposed in this paper can provide an acceptable way to measure the change in ambient temperature.

Keywords

ambient temperature / environment / correlation / theoretical model / semi-empirical

References

[1] Ma H, Si F, Li L, Yan W, Zhu K. Effects of ambient temperature and crosswind on thermo-flow performance of the tower under energy balance of the indirect dry cooling system. Applied Thermal Engineering, 2015, 78(5): 90–100

[2] Borinaga-Treviňo R, Norambuena-Contreras J, Castro-Fresno D. How to correct the ambient temperature influence on the thermal response test results. Applied Thermal Engineering, 2015, 82(5): 39–47

[3] Firmanda Al Riza D, Ihtsham ul Haq Gilani S, Shiraz Aris M. Hourly solar radiation estimation using ambient temperature and relative humidity data. International Journal of Environmental Science and Development, 2011, 2(3): 188–193

[4] Hamrouni N, Jraidi Mand Chérif A. Solar radiation and ambient temperature effects on the performances of a PV pumping system. Revue des Energies Renouvelables, 2008, l(11): 95–106

[5] Sanusi Y K, Fajinmi G R, Babatunde E B. Effects of ambient temperature on the performance of a photovoltaic solar system in a tropical area. Pacific Journal of Science and Technology, 2011, 12(2): 176–180

[6] Singh S P, Singh P. Effect of temperature and light on the growth of algae species: a review. Renewable & Sustainable Energy Reviews, 2015, 50: 431–444

[7] Vaidyanathan J, Vaidyanathan T K. Interactive effects of resin composition and ambient temperature of light curing on the percentage conversion, molar heat of cure and hardness of dental composite resins. Journal of Materials Science: Materials in Medicine, 1992, 3(1): 19–27

[8] Hettinga F J, de Koning J J, de Vrijer A, Wüst R C I, Daanen H A M, Foster C. The effect of ambient temperature on gross-efficiency in cycling. European Journal of Applied Physiology, 2007, 101(4): 465–471

[9] Chabane F, Moummi N, Benramache S. Experimental study of heat transfer and thermal performance with longitudinal fins of solar air heater. Journal of Advanced Research, 2014, 5(2): 183–192

[10] Chabane F, Moummi N, Benramache S, Tolba A S. Experimental study of heat transfer and an effect the tilt angle with variation of the mass flow rates on the solar air heater. International Journal of Science and Engineering Investigations, 2012, 1(9): 61–65

[11] Chabane F, Moummi N, Benramache S. Experimental performance of solar air heater with internal fins inferior an absorber plate: in the region of Biskra. Journal of Energy Resources Technology, 2012, 4(33): 1–6

[12] Chabane F, Moummi N, Brima A, Benramache S. Thermal efficiency analysis of a single-flow solar air heater with different mass flow rates in a smooth plate. Frontiers in Heat and Mass Transfer, 2013, 4(1): 013006

[13] Chabane F, Moummi N, Benramache S, Bensahal D, Belahssen O. Collector efficiency by single pass of solar air heaters with and without using fins. Engineering Journal, 2013, 17(3): 43–55

[14] Chabane F, Moummi N, Benramache S. Effect of the tilt angle of natural convection in a solar collector with internal longitudinal fins. International Journal of Science and Engineering Investigations, 2012, 1(7): 13–17

[15] Chabane F, Moummi N, Benramache S. Experimental analysis on thermal performance of a solar air collector with longitudinal fins in a region of Biskra, Algeria. Journal of Power Technologies, 2013, 93(1): 52–58

[16] Chabane F, Moummi N, Benramache S, Belahssan O, Bensahal D. Nusselt number correlation of SAH. Journal of Power Technologies, 2013, 93(2): 100–110

[17] Chabane F, Moummi N. Heat transfer and energy analysis of a solar air collector with smooth plate. European Physical Journal Applied Physics, 2014, 66(1): 10901

[18] Chabane F, Hatraf N, Moummi N. Experimental study of heat transfer coefficient with rectangular baffle fin of solar air heater. Frontiers in Energy, 2014, 8(2): 160–172

[19] Soteris Kalogiro. Solar energy engineering: processes and systems. Academic Press, 2009

[20] Benlahmidi S. Study of convective drying by solar energy red products. Dissertation for the Doctoral Degree. Biskra: University Mohamed Khider, 2013

[21] Moummi N, Moummi A, Belgacem A, Hachemi A, Le Ray M. Systematic performance prediction of solar air flat plate collectors in various different climates sites in Algeria. National Energy Conference. Neptur Roumani, Juillet, 1995 (in French)

[22] Idliman A. Theoretical study of a drying system leather skins for the Marrakech region, consisting of an agricultural greenhouse acting as a hot air solar generator and a conventional dryer. Dissertation for the Master’s Degree. National School of Marrakech Morocco, 1990

[23] Maufred G. Numerical methods. Department of Econometrics. University of Geneva, 2006

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg