Structure improvement and strength finite element analysis of VHP welded rotor of 700°C USC steam turbine

Abstract

The optimized structure strength design and finite element analysis method for very high pressure (VHP) rotors of the 700°C ultra-super-critical (USC) steam turbine are presented. The main parameters of steam and the steam thermal parameters of blade stages of VHP welded rotors as well as the start and shutdown curves of the steam turbine are determined. The structure design feature, the mechanical models and the typical position of stress analysis of the VHP welded rotors are introduced. The steady and transient finite element analysis are implemented for steady condition, start and shutdown process, including steady rated condition, 110% rated speed, 120% rated speed, cold start, warm start, hot start, very hot start, sliding-pressure shutdown, normal shutdown and emergency shutdown, to obtain the temperature and stress distribution as well as the stress ratio of the welded rotor. The strength design criteria and strength analysis results of the welded rotor are given. The results show that the strength design of improved structure of the VHP welded rotor of the 700°C USC steam turbine is safe at the steady condition and during the transient start or shutdown process.

Keywords

700°C ultra-super-critical unit / steam turbine / very high pressure rotor / structure strength design / strength design criteria / finite element analysis

References

[1] Blum R, Kjær S, Bugge J. Development of a PF fired high efficiency power plant (AD700). In: Proceedings of the Riso International Energy Conference. Riso, Denmark, 2007, 69–80

[2] Blum R, Bugge J, Kjaer S. AD700 innovation pave the way for 53 percent efficiency. Modern Power Systems, 2008, 28(11): 15–19

[3] Robert R U S. Program for advanced ultra-super-critical (A-USC) coal fired power plants. In: Global Advanced Fossil-Gen Summit 2011. Shanghai, China, 2011

[4] Li Y S. National 700°C coal fired generating technology innovation alliance. 2010−07−23, nbsp;(in Chinese)

[5] Huang O, Peng Z Y. Analysis of the economic benefit of 700°C high temperature ultra-super-critical technology. Thermal Turbine, 2010, 39(3): 170–174 (in Chinese)

[6] Ji S D, Zhou R C, Wang S P. Research and development status and localizations of recommendations of 700°C grade advanced ultra-super-critical power generation technology. Thermal Power Generation, 2011, 40(7): 86–88 (in Chinese)

[7] Zhang Y P, Cai X Y, Huang S H, Jin Y C. Status quo of the design and development of 700°C ultra-super-critical coal-fired power generator unit system. Journal of Engineering for Thermal Energy and Power, 2012, 27(2): 143–148 (in Chinese)

[8] Cai X Y, Zhang Y P, Li Y, Huang S H. Design and exergy analysis on thermodynamic system of a 700°C ultra-super-critical coal-fired power generating set. Journal of Chinese Society of Power Engineering, 2012, 32(12): 971–978 (in Chinese)

[9] Wieghardt K. Siemens steam turbine design for AD700 power plants. In: Proceedings of European Conference AD700- Advanced (700°C) PF Power Plant: A Clean Coal European Technology. Milan, Italy, 2005

[10] Blum R, Vanstone R W. Materials development for boilers and steam turbines operating at 700 DGC. In: Proceedings of the Sixth International Charles Parsons Turbine Conference. Parsons, US, 2003, 489–510

[11] Shi J Y, Yang Y, Deng Z C. Life Prediction and Reliability of Large Capacity Steam Turbine. Beijing: China Electric Power Press, 2011 (in Chinese)

[12] Shi J Y, Yang Y, Wang Y. Reliability prediction and safety operation theory and methods of large capacity generating units. Beijing: China Electric Power Press, 2014 (in Chinese)

RIGHTS & PERMISSIONS

Higher Education Press and Springer-Verlag Berlin Heidelberg