Enhancing power generation of piezoelectric bimorph device through geometrical optimization

Action NECHIBVUTE; Albert CHAWANDA; Pearson LUHANGA

doi:10.1007/s11708-015-0360-z

Front. Energy ›› 2015, Vol. 9 ›› Issue (2) : 246 -246. DOI: 10.1007/s11708-015-0360-z

ERRATUM

Enhancing power generation of piezoelectric bimorph device through geometrical optimization

Author information +

History +

PDF (39KB)

Cite this article

Download citation ▾

Action NECHIBVUTE, Albert CHAWANDA, Pearson LUHANGA. Enhancing power generation of piezoelectric bimorph device through geometrical optimization. Front. Energy, 2015, 9(2): 246-246 DOI:10.1007/s11708-015-0360-z

登录浏览全文

4963

注册一个新账户忘记密码

Erratum to: Frontiers in Energy 2014, 8(1): 129–137 DOI: 10.1007/s11708-013-0289-z

The original version of this article unfortunately contained two mistakes.

(1) A mistake appeared in the Section “Conclusions”, Line 3–8, the right column of Page 135.

The sentence “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 508 µW/cm³ could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.” should be changed to “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 2.65 mW/cm³ could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.”

(2) A mistake appeared in the last row of Table 5, Page 136.The corrected table is given below.