Exploring the failure mechanisms of quasi/all solid-state Li-ion batteries with Si-based electrodes

Abstract

Lithium-ion batteries are widely applied in the field of energy storage due to their high energy density and long cycle life. However, traditional liquid electrolytes have safety hazards such as leakage and thermal runaway. The quasi-solid-state battery (QSSB) and all-solid-state battery (ASSB) have emerged as promising alternatives with higher safety and stability. In addition, Si-based electrodes are attractive due to their high theoretical capacity. Currently, researchers apply Si-based electrodes in QSSB and ASSB, but the failure mechanisms within them are not fully summarized and organized. Herein, this work systematically studies the failure mechanisms of QSSB and ASSB with Si-based electrodes, including particle fracture, solid electrolyte interphase breakdown, pore evolution, and electrical contact loss. The influence of rigid solid electrolytes on ASSB is discussed, as well as the limitations of quasi-solid electrolytes, such as low ionic conductivity and side reactions. The strategies for alleviating these problems are also reviewed, including the structural design of Si electrodes, electrolyte optimization, and interface engineering. This article aims to summarize the key failure mechanisms and provide guidance and technological development directions for the subsequent development of high-energy density and long-life batteries.

Keywords

Quasi/all solid-state batteries / Li-ion batteries / Si-based electrodes / solid-electrolyte interphase / failure mechanism

References

[1] Pomerantseva E.,Bonaccorso F.,Feng X.,Cui Y.,Gogotsi Y.. Energy storage: the future enabled by nanomaterials Science 2019 366

[2] Kwon T. W.,Choi J. W.,Coskun A.. The emerging era of supramolecular polymeric binders in silicon anodes Chem. Soc. Rev. 2018 47 2145 64

[3] Goodenough J. B.,Park K. S.. The Li-ion rechargeable battery: a perspective J. Am. Chem. Soc. 2013 135 1167 76

[4] Yang Z.,Zhang J.,Kintner-Meyer M. C..et al. Electrochemical energy storage for green grid Chem. Rev. 2011 111 3577 613

[5] Liu L.,Li M.,Chu L..et al. Layered ternary metal oxides: performance degradation mechanisms as cathodes, and design strategies for high-performance batteries Prog. Mater. Sci. 2020 111 100655

[6] Wang Q.,Mao B.,Stoliarov S. I.,Sun J.. A review of lithium ion battery failure mechanisms and fire prevention strategies Prog. Energy Combust. Sci. 2019 73 95 131

[7] Cao C.,Zhong Y.,Shao Z.. Electrolyte engineering for safer lithium‐ion batteries: a review Chin. J. Chem. 2023 41 1119 41

[8] Ahmed M. S.,Islam M.,Raut B.,Yun S.,Kim H. Y.,Nam K. W.. A Comprehensive review of functional gel polymer electrolytes and applications in lithium-ion Battery Gels 2024 10 563 PMC11430829

[9] Gan L.,Chen R.,Yu X.,Li H.. Understanding the battery safety improvement enabled by a quasi-solid-state battery design Chinese Phys. B. 2022 31 118202

[10] Pervez S. A.,Cambaz M. A.,Thangadurai V.,Fichtner M.. Interface in solid-state lithium battery: challenges, progress, and outlook ACS Appl. Mater. Interfaces 2019 11 22029 50

[11] Schumm B.,Dupuy A.,Lux M..et al. Dry Battery electrode technology: from early concepts to industrial applications Adv. Energy Mater. 2025 15 2406011

[12] Yu J.,Kim B.,Yoo Y.. Dry Electrode processing for lithium‐ion battery cathodes and anodes: materials, fabrication strategies, and future outlook Adv. Mater. Technol. 2025 10 e01420

[13] Sun Y.,Liu N.,Cui Y.. Promises and challenges of nanomaterials for lithium-based rechargeable batteries Nat. Energy 2016 1 16071

[14] Zhang R.,Li N. W.,Cheng X. B.,Yin Y. X.,Zhang Q.,Guo Y. G.. Advanced micro/nanostructures for lithium metal anodes Adv. Sci. 2017 4 1600445

[15] Chen J.,Luo B.,Chen Q..et al. Localized electrons enhanced ion transport for ultrafast electrochemical energy storage Adv. Mater. 2020 32 e1905578

[16] Obrovac M. N.,Krause L. J.. Reversible cycling of crystalline silicon powder J. Electrochem. Soc. 2007 154 A103

[17] Chang H.,Wu Y.,Han X.,Yi T.. Recent developments in advanced anode materials for lithium-ion batteries Energy Mater. 2022 1 100003

[18] Zuo X.,Zhu J.,Müller-buschbaum P.,Cheng Y.. Silicon based lithium-ion battery anodes: a chronicle perspective review Nano Energy 2017 31 113 43

[19] Song S.,Gao W.,Yang G..et al. Hybrid poly-ether/carbonate ester electrolyte engineering enables high oxidative stability for quasi-solid-state lithium metal batteries Mater. Today Energy 2022 23 100893

[20] Xu Z.,Yang J.,Li H.,Nuli Y.,Wang J.. Electrolytes for advanced lithium ion batteries using silicon-based anodes J. Mater. Chem. A. 2019 7 9432 46

[21] Guo Y.,Wu S.,He Y..et al. Solid-state lithium batteries: safety and prospects eScience 2022 2 138 63

[22] Zhang H.,Liu G.,Li H..et al. Recent progress of multilayer polymer electrolytes for lithium batteries Energy Mater. 2023 3 300030

[23] Zhang Q.,Liu K.,Ding F.,Liu X.. Recent advances in solid polymer electrolytes for lithium batteries Nano Res. 2017 10 4139 74

[24] Castillo J.,Qiao L.,Santiago A..et al. Perspective of polymer-based solid-state Li-S batteries Energy Mater. 2022 2 200021

[25] Su H.,Jiang Z.,Liu Y..et al. Recent progress of sulfide electrolytes for all-solid-state lithium batteries Energy Mater. 2022 2 200013

[26] Cui Y.,Wan J.,Ye Y.,Liu K.,Chou L. Y.,Cui Y.. A fireproof, lightweight, polymer-polymer solid-state electrolyte for safe lithium batteries Nano Lett. 2020 20 1686 92

[27] Liu L.,Mo J.,Li J..et al. Comprehensively-modified polymer electrolyte membranes with multifunctional PMIA for highly-stable all-solid-state lithium-ion batteries J. Energy Chem. 2020 48 334 43

[28] Zhu X.,Jiang W.,Zhao S..et al. Exploring the concordant solid-state electrolytes for all-solid-state lithium-sulfur batteries Nano Energy 2022 96 107093

[29] Zhu X.,Wu J.,Lu J.. Insight into Inorganic solid‐state electrolytes: ionic transport and failure mechanisms Adv. Funct. Mater. 2024 34 2409547

[30] Jiang P.,Du G.,Cao J..et al. Solid‐state Li ion batteries with oxide solid electrolytes: progress and perspective Energy Tech. 2023 11 2201288

[31] Reddy M. V.,Julien C. M.,Mauger A.,Zaghib K.. Sulfide and oxide inorganic solid electrolytes for all-solid-state Li batteries: a review Nanomaterials. 2020 10 1066 PMC7466729

[32] Nie X.,Hu J.,Li C.. Halide‐based solid electrolytes: the history, progress, and challenges Interdiscip. Mater. 2023 2 365 89

[33] Li S.,Zhang S. Q.,Shen L..et al. Progress and perspective of ceramic/polymer composite solid electrolytes for lithium batteries Adv. Sci. 2020 7 1903088 PMC7055568

[34] Sun C.,Liu J.,Gong Y.,Wilkinson D. P.,Zhang J.. Recent advances in all-solid-state rechargeable lithium batteries Nano Energy 2017 33 363 86

[35] Wang X.,Zhang Y.,Zhang X..et al. Lithium-salt-rich PEO/Li_0.3La_0.557TiO₃ interpenetrating composite electrolyte with three-dimensional ceramic nano-backbone for all-solid-state lithium-ion batteries ACS Appl. Mater. Interfaces 2018 10 24791 8

[36] Park R. J.,Eschler C. M.,Fincher C. D..et al. Semi-solid alkali metal electrodes enabling high critical current densities in solid electrolyte batteries Nat. Energy 2021 6 314 22

[37] Lahiri A.,Pulletikurthi G.,Shapouri Ghazvini M.,Höfft O.,Li G.,Endres F.. Ionic liquid-organic solvent mixture-based polymer gel electrolyte with high lithium concentration for Li-ion batteries J. Phys. Chem. C. 2018 122 24788 800

[38] Mazzapioda L.,Tsurumaki A.,Di Donato G.,Adenusi H.,Navarra M. A.,Passerini S.. Quasi-solid-state electrolytes - strategy towards stabilising Li|inorganic solid electrolyte interfaces in solid-state Li metal batteries Energy Mater. 2023 3 300036

[39] Zhu M.,Wu J.,Wang Y..et al. Recent advances in gel polymer electrolyte for high-performance lithium batteries J. Energy Chem. 2019 37 126 42

[40] Liu H.,Luo S.,Yang Y..et al. In-situ polymerization formed self-healing quasi-solid electrolyte for high-loading lithium batteries Energy Storage Mater. 2025 78 104250

[41] Rui X.,Hua R.,Ren D..et al. In situ polymerization facilitating practical high-safety quasi-solid-state batteries Adv. Mater. 2024 36 e2402401

[42] He Z.,Zhang C.,Zhu Z.,Yu Y.,Zheng C.,Wei F.. Advances in carbon nanotubes and carbon coatings as conductive networks in silicon‐based anodes Adv. Funct. Mater. 2024 34 2408285

[43] Feng K.,Li M.,Liu W..et al. Silicon-based anodes for lithium-ion batteries: from fundamentals to practical applications Small 2018 14 1702737

[44] Li S.,Liu Y.,Zhang Y..et al. A review of rational design and investigation of binders applied in silicon-based anodes for lithium-ion batteries J. Power Sources 2021 485 229331

[45] Lee W.,Byeon Y. S.,Lee S.,Kong S.,Park M. S.,Yoon W. S.. Over‐ and hyper‐lithiated oxides as sacrificial cathodes for lithium‐ion batteries Adv. Energy Mater. 2024 15 2304533

[46] Zhang Z.,Sun Z.,Han X..et al. An all-electrochem-active silicon anode enabled by spontaneous Li-Si alloying for ultra-high performance solid-state batteries Energy Environ. Sci. 2024 17 1061 72

[47] Kumar R.,Lu P.,Xiao X.,Huang Z.,Sheldon B. W.. Strain-induced lithium losses in the solid electrolyte interphase on silicon electrodes ACS Appl. Mater. Interfaces 2017 9 28406 17

[48] Xu K.. Electrolytes and interphases in Li-ion batteries and beyond Chem. Rev. 2014 114 11503 618

[49] Radvanyi E.,Porcher W.,De Vito E.,Montani A.,Franger S.,Jouanneau Si Larbi S.. Failure mechanisms of nano-silicon anodes upon cycling: an electrode porosity evolution model Phys. Chem. Chem. Phys. 2014 16 17142 53

[50] Seo J. Y.,Kim S.,Kim J. H..et al. Mechanical shutdown of battery separators: silicon anode failure Nat. Commun. 2024 15 10134 PMC11584633

[51] Zhao M.,Zhang J.,Wang W.,Zhang Q.. The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix Nanotechnology 2021 32 485404

[52] Chon M. J.,Sethuraman V. A.,McCormick A.,Srinivasan V.,Guduru P. R.. Real-time measurement of stress and damage evolution during initial lithiation of crystalline silicon Phys. Rev. Lett. 2011 107 045503

[53] Lee S. W.,McDowell M. T.,Choi J. W.,Cui Y.. Anomalous shape changes of silicon nanopillars by electrochemical lithiation Nano Lett. 2011 11 3034 9

[54] McDowell M. T.,Lee S. W.,Harris J. T..et al. In situ TEM of two-phase lithiation of amorphous silicon nanospheres Nano Lett. 2013 13 758 64

[55] Hatchard T. D.,Dahn J. R.. In situ XRD and electrochemical study of the reaction of lithium with amorphous silicon J. Electrochem. Soc. 2004 151 A838

[56] Wang J. W.,He Y.,Fan F..et al. Two-phase electrochemical lithiation in amorphous silicon Nano Lett. 2013 13 709 15

[57] Zhang D.,Lu J.,Pei C.,Ni S.. Electrochemical activation, sintering, and reconstruction in energy‐storage technologies: origin, development, and prospects Adv. Energy Mater. 2022 12 2103689

[58] Piper D. M.,Yersak T. A.,Lee S.. Effect of compressive stress on electrochemical performance of silicon anodes J. Electrochem. Soc. 2012 160 A77 81

[59] Whiteley J. M.,Kim J. W.,Piper D. M.,Lee S.. High-capacity and highly reversible silicon-tin hybrid anode for solid-state lithium-ion batteries J. Electrochem. Soc. 2015 163 A251 4

[60] Tan D. H. S.,Chen Y. T.,Yang H..et al. Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes Science 2021 373 1494 9

[61] Shen D.,Huang C.,Gan L.,Liu J.,Gong Z.,Long M.. Rational design of Si@SiO₂/C composites using sustainable cellulose as a carbon resource for anodes in lithium-ion batteries ACS Appl. Mater. Interfaces 2018 10 7946 54

[62] Kato Y.,Shiotani S.,Morita K.,Suzuki K.,Hirayama M.,Kanno R.. All-solid-state batteries with thick electrode configurations J. Phys. Chem. Lett. 2018 9 607 13

[63] Chen C.,Xu S.,Kuang Y..et al. Nature‐inspired tri‐pathway design enabling high‐performance flexible Li-O₂ batteries Adv. Energy Mater. 2019 9 1802964

[64] Hlushkou D.,Reising A. E.,Kaiser N..et al. The influence of void space on ion transport in a composite cathode for all-solid-state batteries J. Power Sources 2018 396 363 70

[65] Kraytsberg A.,Ein‐eli Y.. Conveying advanced Li‐ion battery materials into practice the impact of electrode slurry preparation skills Adv. Energy Mater. 2016 6 1600655

[66] Koerver R.,Zhang W.,De Biasi L..et al. Chemo-mechanical expansion of lithium electrode materials - on the route to mechanically optimized all-solid-state batteries Energy Environ. Sci. 2018 11 2142 58

[67] Song A.,Zhang W.,Guo H..et al. A review on the features and progress of silicon anodes‐based solid‐state batteries Adv. Energy Mater. 2023 13 2301464

[68] Nelson D. L.,Sandoval S. E.,Pyo J..et al. Fracture dynamics in silicon anode solid-state batteries ACS Energy Lett. 2024 9 6085 95 PMC11650773

[69] Kalnaus S.,Dudney N. J.,Westover A. S.,Herbert E.,Hackney S.. Solid-state batteries: the critical role of mechanics Science 2023 381 eabg5998

[70] Koerver R.,Aygün I.,Leichtweiß T..et al. Capacity fade in solid-state batteries: interphase formation and chemomechanical processes in nickel-rich layered oxide cathodes and lithium thiophosphate solid electrolytes Chem. Mater. 2017 29 5574 82

[71] Schwietert T. K.,Arszelewska V. A.,Wang C..et al. Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes Nat. Mater. 2020 19 428 35

[72] Zhang C.,Zhuang H.,Qi Z.,Liu X.,Ren Y.. The effect of defects for the ion transport of Li₃ScCl₆ and Li₃InCl₆ with the interface of lithium metal anode: a first-principles study Mater. Today Commun. 2023 35 105764

[73] Wang H.,Tan R.,Yang Z.,Feng Y.,Duan X.,Ma J.. Stabilization perspective on metal anodes for aqueous batteries Adv. Energy Mater. 2020 11 2000962

[74] Zhu Y.,Mo Y.. Materials design principles for air-stable lithium/sodium solid electrolytes Angew. Chem. Int. Ed. 2020 59 17472 6

[75] De Biasi L.,Kondrakov A. O.,Geßwein H.,Brezesinski T.,Hartmann P.,Janek J.. Between scylla and charybdis: balancing among structural stability and energy density of layered NCM cathode materials for advanced lithium-ion batteries J. Phys. Chem. C. 2017 121 26163 71

[76] Ryu H.,Park K.,Yoon C. S.,Sun Y.. Capacity fading of Ni-rich Li[Ni_xCo_yMn_1-x-y]O₂ (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation? Chem. Mater. 2018 30 1155 63

[77] Suebsing N.,Jaumaux P.,Safaei J..et al. Integrating surface coating and quasi-solid deep eutectic electrolytes for enhanced cycling of micro-Si anodes in Li-ion batteries Sustain. Energy Fuels 2025 9 1480 5

[78] Zhao E.,Luo S.,Hu A..et al. Rational design of an in-build quasi-solid-state electrolyte for high-performance lithium-ion batteries with the silicon-based anode Chem. Eng. J. 2023 463 142306

[79] Yu M.,Ma J.,Dong L..et al. Stabilizing the SiO_x anode by a highly elastic quasi-solid polyether-based electrolyte via an in situ fabrication ACS Appl. Mater. Interfaces 2025 17 14097 108

[80] Kido R.,Horikawa T.,Sano A..et al. Highly safe quasi-solid-state lithium ion batteries with two kinds of nearly saturated and non-flammable electrolyte solutions J Energy Storage 2024 102 114115

[81] Huang Q.,Song J.,Gao Y..et al. Supremely elastic gel polymer electrolyte enables a reliable electrode structure for silicon-based anodes Nat. Commun. 2019 10 5586 PMC6898440

[82] Xue N.,Yuan Z.,Wang W.,Xu R.,Xie J.,Lei C.. Influence of flexible gelatinous coating layer on electrochemical performance and fatigue failure of lithium battery separator Colloids Surf. A Physicochem. Eng. Asp. 2022 633 127875

[83] Liu T.,Zhang J.,Han W..et al. Review-in situ polymerization for integration and interfacial protection towards solid state lithium batteries J. Electrochem. Soc. 2020 167 070527

[84] Zhan X.,Li M.,Li S..et al. Challenges and opportunities towards silicon-based all-solid-state batteries Energy Storage Mater. 2023 61 102875

[85] Cangaz S.,Hippauf F.,Reuter F. S..et al. Enabling high‐energy solid‐state batteries with stable anode interphase by the use of columnar silicon anodes Adv. Energy Mater. 2020 10 2001320

[86] Dunlap N. A.,Kim S.,Jeong J. J.,Oh K. H.,Lee S.. Simple and inexpensive coal-tar-pitch derived Si-C anode composite for all-solid-state Li-ion batteries Solid State Ionics 2018 324 207 17

[87] Gao P.,Huang X.,Zhao Y..et al. Formation of Si hollow structures as promising anode materials through reduction of silica in AlCl₃-NaCl molten salt ACS Nano 2018 12 11481 90

[88] Pandey G. P.,Klankowski S. A.,Li Y..et al. Effective infiltration of gel polymer electrolyte into silicon-coated vertically aligned carbon nanofibers as anodes for solid-state lithium-ion batteries ACS Appl. Mater. Interfaces 2015 7 20909 18

[89] Li B.,Zhang K.,Yu B..et al. Achieving cycling stability of silicon-based anodes for lithium-ion batteries: From lithium storage/failure mechanism to structure optimization J Energy Storage 2025 136 118395

[90] Li J.,Daniel C.,Wood D.. Materials processing for lithium-ion batteries J. Power Sources 2011 196 2452 60

[91] Zhao M.,Zhang J.,Costa C. M.,Lanceros-Méndez S.,Zhang Q.,Wang W.. Unveiling challenges and opportunities in silicon-based all-solid-state batteries: thin-film bonding with mismatch strain Adv. Mater. 2024 36 e2308590

[92] Bachman J. C.,Muy S.,Grimaud A..et al. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction Chem. Rev. 2016 116 140 62

[93] Jung W. D.,Jeon M.,Shin S. S..et al. Functionalized sulfide solid electrolyte with air-stable and chemical-resistant oxysulfide nanolayer for all-solid-state batteries ACS Omega 2020 5 26015 22 PMC7558032

[94] Zhang F.,Huang Q.,Tang Z..et al. A review of mechanics-related material damages in all-solid-state batteries: Mechanisms, performance impacts and mitigation strategies Nano Energy 2020 70 104545

[95] Xu Z.,Tang X.,Wang S..et al. Overview of research on composite electrolytes for solid-state batteries Energy Storage Sci. Technol. 2021 10 1737 51

[96] Zheng, Y.; Yao, Y.; Ou, J.; et al. A review of composite solid-state electrolytes for lithium batteries: fundamentals, key materials and advanced structures Chem. Soc. Rev. 2020 49 8790 839

[97] Cao Z.,Zheng X.,Qu Q.,Huang Y.,Zheng H.. Electrolyte design enabling a high-safety and high-performance Si anode with a tailored electrode-electrolyte interphase Adv. Mater. 2021 33 e2103178

[98] Liu G.,Yuan Z.,Deng Y..et al. A review on “growth mechanisms and optimization strategies for the interface state of solid‐state lithium‐ion batteries” Int. J. Appl. Ceram. Technol. 2023 21 5 43

[99] Etacheri V.,Haik O.,Goffer Y..et al. Effect of fluoroethylene carbonate (FEC) on the performance and surface chemistry of Si-nanowire Li-ion battery anodes Langmuir 2012 28 965 76

[100] Aurbach D.,Gamolsky K.,Markovsky B.,Gofer Y.,Schmidt M.,Heider U.. On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries Electrochim. Acta 2002 47 1423 39

[101] Zhang Y.,Zhang L.,Zhao Z..et al. Lithiophilic Li-Si alloy-solid electrolyte interface enabled by high-concentration dual salt-reinforced quasi-solid-state electrolyte J. Energy Chem. 2024 95 216 30

[102] Liu X.,Wang D.,Zhang Z..et al. Gel polymer electrolyte enables low-temperature and high-rate lithium-ion batteries via bionic interface design Small 2024 20 e2404879

[103] Zeng B.,Gu Q.,Zhang Y..et al. Engineering electrode-electrolyte interface for ultrastable Si-based solid-state batteries Surf. Interfaces. 2024 44 103687

[104] Abdollahifar M.,Vinograd A.,Lu C. Y..et al. Enabling long-cycling life of Si-on-graphite composite anodes via fabrication of a multifunctional polymeric artificial solid-electrolyte interphase protective layer ACS Appl. Mater. Interfaces 2022 14 38824 34

[105] Luo W.,Chen X.,Xia Y..et al. Surface and interface engineering of silicon‐based anode materials for lithium‐ion batteries Adv. Energy Mater. 2017 7 1701083

[106] Yang J.,Zhang X.,Hou M..et al. Research advances in interface engineering of solid‐state lithium batteries Carbon Neutral. 2025 4 e188