Advancements, Challenges, and Future Trajectories in Advanced Battery Safety Detection

Abstract

The widespread use of high-energy–density lithium-ion batteries (LIBs) in new energy vehicles and large-scale energy storage systems has intensified safety concerns, especially regarding the safe and reliable operation of large battery packs composed of hundreds of individual cells. This review begins with an analysis of the causes and failure mechanisms, and then continues with an examination of the many connections and influences among different factors to elucidate the complex and unpredictable issues of LIB safety. The analysis includes examples of large-scale battery failures to illustrate how failures propagate within extensive battery networks, highlighting the unique challenges associated with monitoring the safety of large-scale battery packs. Subsequently, a comparative assessment of numerous detection technologies is further conducted to underscore the challenges encountered in battery safety detection, particularly in large-scale battery systems. Additionally, the paper discusses the role of artificial intelligence (AI) in addressing battery safety concerns, explores the future trajectory of safety detection technology, and outlines the necessity and foundational framework for constructing smart battery management systems (BMSs). The discussion focuses on how AI and smart BMSs can be tailored to manage the complexities of large-scale battery packs, enabling real-time monitoring and predictive maintenance to prevent catastrophic failures.

Graphical Abstract

Keywords

Lithium-ion batteries / Battery safety / Safety detection technology / Battery management system / Lage battery pack

References

[1] XuCJ, DaiQ, GainesL, et al. . Future material demand for automotive lithium-based batteries. Commun. Mater., 2020, 1: 99.

[2] AhmedS, NelsonPA, GallagherKG, et al. . Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing. J. Power. Sources, 2016, 322: 169-178.

[3] RoyJJ, RarotraS, KrikstolaityteV, et al. . Green recycling methods to treat lithium-ion batteries E-waste: a circular approach to sustainability. Adv. Mater., 2022, 34: 2103346.

[4] PiątekJ, AfyonS, BudnyakTM, et al. . Sustainable Li-ion batteries: chemistry and recycling. Adv. Energy Mater., 2021, 11: 2003456.

[5] LiM, LuJ, ChenZW, et al. . 30 years of lithium-ion batteries. Adv. Mater., 2018, 30: 1800561.

[6] FanES, LiL, WangZP, et al. . Sustainable recycling technology for Li-ion batteries and beyond: Challenges and future prospects. Chem. Rev., 2020, 120: 7020-7063.

[7] LaiX, HuangYF, GuHH, et al. . Turning waste into wealth: a systematic review on echelon utilization and material recycling of retired lithium-ion batteries. Energy Storage Mater., 2021, 40: 96-123.

[8] Pillot, C.: The Rechargeable Battery Market and Main Trends 2017–2030 (Avicenne Energy). https://docslib.org/doc/1005469/the-rechargeable-battery-market-and-main-trends-2018-2030 (2019). Accessed 18 Mar 2025

[9] GoodenoughJB. Evolution of strategies for modern rechargeable batteries. Acc. Chem. Res., 2013, 46: 1053-1061.

[10] LiZH, KhajepourA, SongJC. A comprehensive review of the key technologies for pure electric vehicles. Energy, 2019, 182: 824-839.

[11] World Economic Forum: A Vision for a Sustainable Battery Value Chain in 2030. Unlocking the Full Potential to Power Sustainable Development and Climate Change Mitigation (2019). https://www.weforum.org/publications/a-vision-for-a-sustainable-battery-value-chain-in-2030/. Accessed 18 Mar 2025

[12] JiWX, WangF, LiuDT, et al. . Building thermally stable Li-ion batteries using a temperature-responsive cathode. J. Mater. Chem. A, 2016, 4: 11239-11246.

[13] National public service platform for standard information (GB): Electric Vehicles Traction Battery Safety Requirements. GB 38031–2020 (2020). 12 May 2020.

[14] Safety requirements and test methods of lithium ion battery for electrical energy storage. T/CEC 172–2018 (2018). https://www.cec.org.cn/upload/file/biaozhunhua/zhongdianlianbiaozhun/2018-07-27/84dd0b769584b14a250a55874d0b0daa.pdf

[15] DuffnerF, KronemeyerN, TübkeJ, et al. . Post-lithium-ion battery cell production and its compatibility with lithium-ion cell production infrastructure. Nat. Energy, 2021, 6: 123-134.

[16] NyamathullaS, DhanamjayuluC. A review of battery energy storage systems and advanced battery management system for different applications: Challenges and recommendations. J. Energy Storage, 2024, 86. 111179

[17] TarasconJM, ArmandM. Issues and challenges facing rechargeable lithium batteries. Nature, 2001, 414: 359-367.

[18] HarperG, SommervilleR, KendrickE, et al. . Recycling lithium-ion batteries from electric vehicles. Nature, 2019, 575: 75-86.

[19] HuangB, PanZF, SuXY, et al. . Recycling of lithium-ion batteries: recent advances and perspectives. J. Power. Sources, 2018, 399: 274-286.

[20] Data released on China Government Network: In 2023, our country’s automobile production and sales will exceed 30 million units for the first time_China Government Network https://www.gov.cn (2024). Accessed 11 Jan 2024

[21] Yang, F.: Tesla new energy vehicle fire in Shanghai, China. https://www.thepaper.cn/newsDetail_forward_3328210 (2019). Accessed 21 Apr 2019

[22] National Fire and Rescue Administration of the Ministry of Emergency Management: Statistics of national fire and rescue teams receiving and responding to police and fires in 2021 https://www.119.gov.cn/gk/sjtj/2022/26442.shtml (2021). Accessed 18 Mar 2025

[23] National Fire and Rescue Administration of the Ministry of Emergency Management: National fire accident statistics in the first quarter https://www.119.gov.cn/gk/sjtj/2022/28761.shtml (2022). Accessed 18 Mar 2025

[24] CheYH, HuXS, LinXK, et al. . Health prognostics for lithium-ion batteries: mechanisms, methods, and prospects. Energy Environ. Sci., 2023, 16: 338-371.

[25] ArmandM, TarasconJM. Building better batteries. Nature, 2008, 451: 652-657.

[26] DegenF, WinterM, BendigD, et al. . Energy consumption of current and future production of lithium-ion and post lithium-ion battery cells. Nat. Energy, 2023, 8: 1284-1295.

[27] LanderJJ, NelsonEE. Discharge of a lead-acid cell through an R-L Circuit. J. Electrochem. Soc., 1960, 107: 722.

[28] Steele, B.C.H.: Fast Ion Transport in Solids, pp. 103–109. North-Holland Amsterdam (1973).

[29] Armand, M.B.: Fast Ion Transport in Solids, pp. 665–673. North-Holland Amsterdam (1973).

[30] WhittinghamMS. Electrical energy storage and intercalation chemistry. Science, 1976, 192: 1126-1127.

[31] LazzariM, ScrosatiB. A cyclable lithium organic electrolyte cell based on two intercalation electrodes. J. Electrochem. Soc., 1980, 127: 773-774.

[32] BernardiD, PawlikowskiE, NewmanJ. A general energy balance for battery systems. J. Electrochem. Soc., 1985, 132: 5-12.

[33] VogdanisL, MartensB, UchtmannH, et al. . Synthetic and thermodynamic investigations in the polymerization of ethylene carbonate. Makromol. Chem., 1990, 191: 465-472.

[34] RomanI, PetrN. Oxidative electrolyte solvent degradation in lithium-ion batteries an in situ differential electrochemical mass spectrometry investigation. J. Electrochem. Soc., 1999, 146: 1702.

[35] DigbyD, MacdonaldE, SikoraGE. Characterizing electrochemical systems in the frequency domain. Electrochim. Acta, 1998, 43: 87-107.

[36] LiuK, LiuYY, LinDC, et al. . Materials for lithium-ion battery safety. Sci. Adv., 2018, 4: 6.

[37] DingJ, TianTF, MengQ, et al. . Smart multifunctional fluids for lithium ion batteries: enhanced rate performance and intrinsic mechanical protection. Sci. Rep., 2013, 3: 2485.

[38] Zhang, Y., Yu, L., Zhang, X.D., et al.: A smart risk-responding polymer membrane for safer batteries. Sci. Adv. 9, 5 (2023). https://doi.org/10.1126/sciadv.ade5802

[39] LuJ, WuTP, AmineK. State-of-the-art characterization techniques for advanced lithium-ion batteries. Nat. Energy, 2017, 2: 17011.

[40] LiHY, GuoSH, ZhouHS. In situ/operando characterization techniques in lithium-ion batteries and beyond. J. Energy Chem., 2021, 59: 191-211.

[41] WeiZB, ZhaoJY, HeHW, et al. . Future smart battery and management: advanced sensing from external to embedded multi-dimensional measurement. J. Power. Sources, 2021, 489. 229462

[42] RobinsonJB, OwenRE, KokMDR, et al. . Identifying defects in Li-ion cells using ultrasound acoustic measurements. J. Electrochem. Soc., 2020, 167. 120530

[43] MaoSY, HanXB, LuY, et al. . Multi sensor fusion methods for state of charge estimation of smart lithium-ion batteries. J. Energy Storage, 2023, 72. 108736

[44] OuyangDX, ChenMY, HuangQ, et al. . A review on the thermal hazards of the lithium-ion battery and the corresponding countermeasures. Appl. Sci., 2019, 9: 2483.

[45] FengXN, OuyangMG, LiuX, et al. . Thermal runaway mechanism of lithium ion battery for electric vehicles: a review. Energy Storage Mater., 2018, 10: 246-267.

[46] ZhangX, YaoJ, ZhuLP, et al. . Experimental and simulation investigation of thermal runaway propagation in lithium-ion battery pack systems. J. Energy Storage, 2024, 77. 109868

[47] LiuYK, ZhaoCZ, DuJ, et al. . Research progresses of liquid electrolytes in lithium-ion batteries. Small, 2023, 19: 2205315.

[48] HouLP, ZhangXQ, LiBQ, et al. . Cycling a lithium metal anode at 90 °C in a liquid electrolyte. Angew. Chem. Int. Ed., 2020, 59: 15109-15113.

[49] LiangYR, ZhaoCZ, YuanH, et al. . A review of rechargeable batteries for portable electronic devices. InfoMat, 2019, 1: 6-32.

[50] WangCH, KimJT, WangCS, et al. . Progress and prospects of inorganic solid-state electrolyte-based all-solid-state pouch cells. Adv. Mater., 2023, 35: 2209074.

[51] TangX, LvSY, JiangK, et al. . Recent development of ionic liquid-based electrolytes in lithium-ion batteries. J. Power. Sources, 2022, 542. 231792

[52] StamenkovicVR, StrmcnikD, LopesPP, et al. . Energy and fuels from electrochemical interfaces. Nat. Mater., 2017, 16: 57-69.

[53] YangZG, ZhangJL, Kintner-MeyerMCW, et al. . Electrochemical energy storage for green grid. Chem. Rev., 2011, 111: 3577-3613.

[54] SandhyaCP, JohnB, GouriC. Lithium titanate as anode material for lithium-ion cells: a review. Ionics, 2014, 20: 601-620.

[55] GuanPY, ZhouL, YuZL, et al. . Recent progress of surface coating on cathode materials for high-performance lithium-ion batteries. J. Energy Chem., 2020, 43: 220-235.

[56] LiuY, LiCX, LiC, et al. . Highly thermally stable, highly electrolyte-wettable hydroxyapatite/cellulose nanofiber hybrid separators for lithium-ion batteries. ACS Appl. Energy Mater., 2023, 6: 3862-3871.

[57] DaiXK, ZhangXM, WenJW, et al. . Research progress on high-temperature resistant polymer separators for lithium-ion batteries. Energy Storage Mater., 2022, 51: 638-659.

[58] YuanLX, WangZH, ZhangWX, et al. . Development and challenges of LiFePO₄ cathode material for lithium-ion batteries. Energy Environ. Sci., 2011, 4: 269-284.

[59] HuLB, WuH, La MantiaF, et al. . Thin, flexible secondary Li-ion paper batteries. ACS Nano, 2010, 4: 5843-5848.

[60] ChenF, FangGF. Harnessing digital twin and IoT for real-time monitoring, diagnostics, and error correction in domestic solar energy storage. Energy Rep., 2024, 11: 3614-3623.

[61] PengJ, ZhaoX, MaJ, et al. . Enhancing lithium-ion battery monitoring: a critical review of diverse sensing approaches. eTransportation, 2024, 22: 100360.

[62] LiangYF, SongDH, WuWJ, et al. . Review of the real-time monitoring technologies for lithium dendrites in lithium-ion batteries. Molecules, 2024, 29: 2118.

[63] ShangYZ, WangSS, TangNH, et al. . Research progress in fault detection of battery systems: a review. J. Energy Storage, 2024, 98. 113079

[64] HuXS, ZhangK, LiuKL, et al. . Advanced fault diagnosis for lithium-ion battery systems: a review of fault mechanisms, fault features, and diagnosis procedures. EEE Ind. Electron. Mag., 2020, 14: 65-91.

[65] BasuSM, HariharanKS, KolakeSM, et al. . Coupled electrochemical thermal modelling of a novel Li-ion battery pack thermal management system. Appl. Energy, 2016, 181: 1-13.

[66] DengJ, BaeC, MarcickiJ, et al. . Safety modelling and testing of lithium-ion batteries in electrified vehicles. Nat. Energy, 2018, 3: 261-266.

[67] ZhangK, HuXS, LiuYG, et al. . Multi-fault detection and isolation for lithium-ion battery systems. IEEE Trans. Power Electron., 2022, 37: 971-989.

[68] ChoHJ, PrestonDJ, ZhuYY, et al. . Nanoengineered materials for liquid-vapour phase-change heat transfer. Nat. Rev. Mater., 2017, 2: 16092.

[69] ChengR, WangQX, WangZX, et al. . Liquid-infused nanostructured composite as a high-performance thermal interface material for effective cooling. Nat. Commun., 2025, 16: 794.

[70] Ye, D.H., Wu, T.H., Chen, C.F., et al.: Battery isolation mechanism for buck-boost battery power modules in series. In: 2016 4th International Symposium on Environmental Friendly Energies and Applications (EFEA). Belgrade, Serbia. IEEE, pp. 1–5(2016). https://doi.org/10.1109/efea.2016.7748770

[71] SawLH, PoonHM, ThiamHS, et al. . Novel thermal management system using mist cooling for lithium-ion battery packs. Appl. Energy, 2018, 223: 146-158.

[72] HeYZ, LiMC, MengZQ, et al. . An overview of acoustic emission inspection and monitoring technology in the key components of renewable energy systems. Mech. Syst. Signal Process., 2021, 148. 107146

[73] YuYC, SafariA, NiuXD, et al. . Acoustic and ultrasonic techniques for defect detection and condition monitoring in water and sewerage pipes: a review. Appl. Acoust., 2021, 183. 108282

[74] KumariP, KeckS, SohnE, et al. . Advanced imaging integration: multi-modal Raman light sheet microscopy combined with zero-shot learning for denoising and super-resolution. Sensors, 2024, 24: 7083.

[75] ZhuLJ, WangJ, WangYT, et al. . Detection of impedance inhomogeneity in lithium-ion battery packs based on local outlier factor. Energies, 2024, 17: 5123.

[76] SunJL, JiangT, YangG, et al. . A novel charging and active balancing system based on wireless power transfer for Lithium-ion battery pack. J. Energy Storage, 2022, 55. 105741

[77] MaiorinoA, CilentiC, PetruzzielloF, et al. . A review on thermal management of battery packs for electric vehicles. Appl. Therm. Eng., 2024, 238. 122035

[78] Hossain LipuMS, HannanMA, KarimTF, et al. . Intelligent algorithms and control strategies for battery management system in electric vehicles: Progress, challenges and future outlook. J. Clean. Prod., 2021, 292. 126044

[79] WangYJ, XuRL, ZhouCJ, et al. . Digital twin and cloud-side-end collaboration for intelligent battery management system. J. Manuf. Syst., 2022, 62: 124-134.

[80] TianEG, ChenH, WangCS, et al. . Security-ensured state of charge estimation of lithium-ion batteries subject to malicious attacks. IEEE Trans. Smart Grid, 2023, 14: 2250-2261.

[81] AhmedI, RehanM, BasitA, et al. . A dynamic optimal scheduling strategy for multi-charging scenarios of plug-in-electric vehicles over a smart grid. IEEE Access, 2023, 11: 28992-29008.

[82] LvCD, ZhouX, ZhongLX, et al. . Machine learning: an advanced platform for materials development and state prediction in lithium-ion batteries. Adv. Mater., 2022, 34: 2101474.

[83] LiuKL, WeiZB, ZhangCH, et al. . Towards long lifetime battery: AI-based manufacturing and management. IEEE/CAA J. Autom. Sinica, 2022, 9: 1139-1165.

[84] ZhangYZ, WikT, BergströmJ, et al. . State of health estimation for lithium-ion batteries under arbitrary usage using data-driven multimodel fusion. IEEE Trans. Transp. Electrific., 2024, 10: 1494-1507.

[85] ZhaoJY, FengXN, PangQQ, et al. . Battery safety: machine learning-based prognostics. Prog. Energy Combust. Sci., 2024, 102. 101142

[86] WeiZB, YangXF, LiY, et al. . Machine learning-based fast charging of lithium-ion battery by perceiving and regulating internal microscopic states. Energy Storage Mater., 2023, 56: 62-75.

[87] LiRX, PanYJ, ZhangXX, et al. . Mechanical safety prediction of a battery-pack system under low speed frontal impact via machine learning. Eng. Anal. Bound. Elem., 2024, 160: 65-75.

[88] FengY, ZhouLM, MaH, et al. . Challenges and advances in wide-temperature rechargeable lithium batteries. Energy Environ. Sci., 2022, 15: 1711-1759.

[89] DuYT, FujitaK, ShironitaS, et al. . Capacity fade characteristics of nickel-based lithium-ion secondary battery after calendar deterioration at 80 °C. J. Power. Sources, 2021, 501. 230005

[90] HuAJ, LiF, ChenW, et al. . Ion transport kinetics in low-temperature lithium metal batteries. Adv. Energy Mater., 2022, 12: 2202432.

[91] CaiWL, YaoYX, ZhuGL, et al. . A review on energy chemistry of fast-charging anodes. Chem. Soc. Rev., 2020, 49: 3806-3833.

[92] GuptaA, ManthiramA. Designing advanced lithium-based batteries for low-temperature conditions. Adv. Energy Mater., 2020, 10: 2001972.

[93] WuJL, WuYL, WangLG, et al. . Challenges and advances in rechargeable batteries for extreme-condition applications. Adv. Mater., 2024, 36: 2308193.

[94] ByunS, ParkJ, AppiahWA, et al. . The effects of humidity on the self-discharge properties of Li(Ni_1/3Co_1/3Mn_1/3)O₂/graphite and LiCoO₂/graphite lithium-ion batteries during storage. RSC Adv., 2017, 7: 10915-10921.

[95] HaY, StetsonC, HarveySP, et al. . Effect of water concentration in LiPF₆-based electrolytes on the formation, evolution, and properties of the solid electrolyte interphase on Si anodes. ACS Appl. Mater. Interfaces, 2020, 12: 49563-49573.

[96] YangDJ, LiXJ, WuNN, et al. . Effect of moisture content on the electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂/graphite battery. Electrochim. Acta, 2016, 188: 611-618.

[97] ZhaoY, SteinP, BaiY, et al. . A review on modeling of electro-chemo-mechanics in lithium-ion batteries. J. Power. Sources, 2019, 413: 259-283.

[98] DuanXD, WangHC, JiaYK, et al. . A multiphysics understanding of internal short circuit mechanisms in lithium-ion batteries upon mechanical stress abuse. Energy Storage Mater., 2022, 45: 667-679.

[99] YangS, WangWW, LinC, et al. . Investigation of internal short circuits of lithium-ion batteries under mechanical abusive conditions. Energies, 2019, 12: 1885.

[100] SunZY, ZhaoJW, ZhuM, et al. . Critical problems and modification strategies of realizing high-voltage LiCoO₂ cathode from electrolyte engineering. Adv. Energy Mater., 2024, 14: 2303498.

[101] VinodkumarE, RotemM, RanE, et al. . Challenges in the development of advanced Li-ion batteries: a review. Energy Environ. Sci., 2011, 4: 9.

[102] KleinS, van WickerenS, RöserS, et al. . Understanding the outstanding high-voltage performance of NCM523||Graphite lithium ion cells after elimination of ethylene carbonate solvent from conventional electrolyte. Adv. Energy Mater., 2021, 11: 2003738.

[103] Blum, A.: Victorian big battery fire: July 30, 2021 https://victorianbigbattery.com.au/wp-content/uploads/2023/10/VBB-Fire-Independent-Report-of-Technical-Findings.pdf (2021). Access 19 Mar 2025

[104] Carleton, A.: The largest lithium-ion battery in the world keeps melting https://www.vice.com/en/article/largest-lithium-ion-battery-in-the-world-meltdown-moss-landing/(2022). Access 19 Mar 2025

[105] Korea’s Ministry of Trade, Industry and Energy: ESS incidents cause investigation results and safety enhancement measures announcement (2019).

[106] JungSK, GwonH, HongJ, et al. . Understanding the degradation mechanisms of LiNi_0.5Co_0.2Mn_0.3O₂ cathode material in lithium ion batteries. Adv. Energy Mater., 2014, 4: 1300787.

[107] PinsonMB, BazantMZ. Theory of SEI formation in rechargeable batteries: capacity fade, accelerated aging and lifetime prediction. J. Electrochem. Soc., 2013, 160: A243-A250.

[108] DeshpandeR, VerbruggeM, ChengYT, et al. . Battery cycle life prediction with coupled chemical degradation and fatigue mechanics. J. Electrochem. Soc., 2012, 159: A1730-A1738.

[109] BirklCR, RobertsMR, McTurkE, et al. . Degradation diagnostics for lithium ion cells. J. Power. Sources, 2017, 341: 373-386.

[110] LiuYY, LiaoCL, ZhangWJ, et al. . Internal short circuit diagnosis of lithium-ion battery based on mechanism model and deep learning. J. Electrochem. Soc., 2022, 169. 100514

[111] XuJY, MaJ, ZhaoX, et al. . Detection technology for battery safety in electric vehicles: a review. Energies, 2020, 13: 4636.

[112] RenDS, FengXN, LiuLS, et al. . Investigating the relationship between internal short circuit and thermal runaway of lithium-ion batteries under thermal abuse condition. Energy Storage Mater., 2021, 34: 563-573.

[113] HendricksC, WilliardN, MathewS, et al. . A failure modes, mechanisms, and effects analysis (FMMEA) of lithium-ion batteries. J. Power. Sources, 2015, 297: 113-120.

[114] ZhaoR, LiuJ, GuJJ. Simulation and experimental study on lithium ion battery short circuit. Appl. Energy, 2016, 173: 29-39.

[115] YuQQ, NieYW, PengSM, et al. . Evaluation of the safety standards system of power batteries for electric vehicles in China. Appl. Energy, 2023, 349. 121674

[116] Future technology series reports: Opportunities and challenges of new energy technology research. Chinese Journal of Science https://imgtech.gmw.cn/site2/20210414/f44d30758a6e21e0dc180c.pdf (2021). Accessed 19 Mar 2025

[117] National public service platform for standard information (GB): Lithium Ion Cells and Batteries Used in Portable Electronic Equipments: Safety Technical Specification. GB 31241-2014 (2014). 5 Dec 2014

[118] State Administration for Market Regulation: Announcement of the State Administration for Market Regulation on the implementation of mandatory product certification management for lithium-ion batteries and other products. https://www.samr.gov.cn/zw/zfxxgk/fdzdgknr/rzjgs/art/2023/art_ad15150414fe40d3807857910bff7118.html (2023). Accessed 19 Mar 2025

[119] National public service platform for standard information (GB): Electromagnetic Compatibility: Limits: Part 1: Limits for Harmonic Current Emissions (Equipment Input Current ⩽\documentclass[12pt]{minimal}\usepackage{amsmath}\usepackage{wasysym}\usepackage{amsfonts}\usepackage{amssymb}\usepackage{amsbsy}\usepackage{mathrsfs}\usepackage{upgreek}\setlength{\oddsidemargin}{-69pt}\begin{document}$$\leqslant$$\end{document} 16 A per Phase) GB 17625.1–2012 (2012). 31 Dec 2012

[120] Yan, Z.X., Yu, H.B., Xiao, Q., et al.: Design of large-scale power battery safety monitoring system. In: 2024 Conference of Science and Technology for Integrated Circuits (CSTIC). Shanghai, China. IEEE, pp. 1–3(2024). https://doi.org/10.1109/cstic61820.2024.10531836

[121] RenDS, FengXN, LuLG, et al. . Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions. Appl. Energy, 2019, 250: 323-332.

[122] Kascak, S., Mazgut, R., Prazenica, M., et al.: Testing of overcurrent protection for the battery supplied system. In: 2016 ELEKTRO. Strbske Pleso, Slovakia. IEEE, pp. 168–171(2016). https://doi.org/10.1109/elektro.2016.7512058

[123] WangYJ, ChenZH. A framework for state-of-charge and remaining discharge time prediction using unscented particle filter. Appl. Energy, 2020, 260. 114324

[124] ZhangSZ, GuoX, DouXX, et al. . A rapid online calculation method for state of health of lithium-ion battery based on coulomb counting method and differential voltage analysis. J. Power. Sources, 2020, 479. 228740

[125] MengJH, RiccoM, LuoGZ, et al. . An overview and comparison of online implementable SOC estimation methods for lithium-ion battery. IEEE Trans. Ind. Applicat., 2018, 54: 1583-1591.

[126] WangYJ, ZhangXC, LiKQ, et al. . Perspectives and challenges for future lithium-ion battery control and management. eTransportation, 2023, 18: 100260.

[127] Hsieh, Y.C., Wu, J.L., Kuo, Q.Y.: A Li-ion battery string protection system. International Conference on Applied Electronics. IEEE. pp. 1–4 (2011). https://ieeexplore.ieee.org/document/6049095

[128] LeeTJ, ChenYT. On-chip wide range bidirectional current sensor for Li-ion battery management system. Phys. Sci. Rev., 2018, 3: 20160013.

[129] LeeS, HongS, ParkW, et al. . High accuracy open-type current sensor with a differential planar hall resistive sensor. Sensors, 2018, 18: 2231.

[130] Baorda, R.P., Rosa, T., Angelini, P., et al.: Integrated metal shunt with matched sensing resistor for high-side current sensing. In: ESSCIRC 2023- IEEE 49th European Solid State Circuits Conference (ESSCIRC). Lisbon, Portugal. IEEE, pp. 241–244(2023). https://doi.org/10.1109/esscirc59616.2023.10268715

[131] ShalmanySH, MakinwaK, DraxelmayrD. A ±5 A battery current sensor with ±0.04% gain error from −55 °C to +125 °C. IWASI, IEEE., 2013.

[132] Xu, D.P., Wang, L.F., Yang, J.: Research on Li-ion battery management system. In: 2010 International Conference on Electrical and Control Engineering. Wuhan, China. IEEE, pp. 4106–4109(2010). https://doi.org/10.1109/icece.2010.998

[133] ZieglerS, WoodwardRC, IuHH, et al. . Current sensing techniques: a review. IEEE Sens. J., 2009, 9: 354-376.

[134] BraudawayDW. Behavior of resistors and shunts: with today’s high-precision measurement capability and a century of materials experience, what can go wrong?. IEEE Trans. Instrum. Meas., 1999, 48: 889-893.

[135] LiJJ, RenW, LuoYS, et al. . Design of fluxgate current sensor based on magnetization residence times and neural networks. Sensors, 2024, 24: 3752.

[136] YangXG, GuoW, LiCC, et al. . Design optimization of a fluxgate current sensor with low interference. IEEE Trans. Appl. Supercond., 2016, 26: 1-5.

[137] GarchaP, SchafferV, HarounB, et al. . A duty-cycled integrated-fluxgate magnetometer for current sensing. IEEE J. Solid State Circuits, 2022, 57: 2741-2751.

[138] ChenYF, HuangQ, KhawajaAH. An interference-rejection strategy for measurement of small current under strong interference with magnetic sensor array. IEEE Sens. J., 2019, 19: 692-700.

[139] ItzkeA, WeissR, DiLeoT, et al. . The influence of interference sources on a magnetic field-based current sensor for multiconductor measurement. IEEE Sens. J., 2018, 18: 6782-6787.

[140] XiaB, MiC. A fault-tolerant voltage measurement method for series connected battery packs. J. Power. Sources, 2016, 308: 83-96.

[141] New energy vehicle fire accident in Licheng District, Putian City, Fujian Province, China, April 21, 14 p.m. in 2022. https://new.qq.com/rain/a/20220430A04HPO00 (2022). Accessed 19 Mar 2025

[142] New energy vehicle fire accident in Tashan Street, Liupanshui Liupanzhi Special Zone, Guizhou Province, China, March 15, 2023. https://www.thepaper.cn/newsDetail_forward_22366529 (2023). Accessed 19 Mar 2025

[143] KimCH, KimMY, MoonGW. A modularized charge equalizer using a battery monitoring IC for series-connected Li-ion battery strings in electric vehicles. IEEE Trans. Power Electron., 2012, 28: 8.

[144] NXP: MM9Z1_638D1, intelligent battery sensor with CAN and LIN - Data sheet. https://www.nxp.com.cn/ Accessed 19 Mar 2025

[145] Nugroho, B., Yahya, A., Rahim, A., et al.: Magnetic field relationship between distance and induced voltage generated by electromagnetic pulse (EMP). In: 2018 5th International Conference on Information Technology, Computer, and Electrical Engineering (ICITACEE). Semarang, Indonesia. IEEE, pp. 7–10(2018). https://doi.org/10.1109/icitacee.2018.8576895

[146] Wang, H.X., Li, K.X., Ding, H.J., et al.: Research on improvement of temperature stability of optical voltage transducer. In: 2014 7th International Conference on Intelligent Computation Technology and Automation. Changsha, China. IEEE, pp. 534–538(2014). https://doi.org/10.1109/icicta.2014.135

[147] KanekoT, TsujiT, OhdouJ, et al. . Development of high voltage harmonic measuring instruments for distribution systems using optical voltage sensor and current sensor. Electr. Eng. Jpn., 1999, 128: 84-93.

[148] LeeCY, WengFB, HuangYP, et al. . Real-time monitoring of internal temperature and voltage of high-temperature fuel cell stack. Electrochim. Acta, 2015, 161: 413-419.

[149] LeeC-Y, PengHC, LeeSJ, et al. . A flexible three-in-one microsensor for real-time monitoring of internal temperature, voltage and current of lithium batteries. Sensors, 2015, 15: 11485-11498.

[150] RogersAJ. Optical methods for measurement of voltage and current on power systems. Opt. Laser Technol., 1977, 9: 273-283.

[151] WangZB, LiaoYB, LaiSR, et al. . A novel method for simultaneous measurement of current and voltage using one low-birefringence fiber. Opt. Laser Technol., 1998, 30: 257-262.

[152] LiCS, YoshinoT. Optical voltage sensor based on electrooptic crystal multiplier. J. Lightwave Technol., 2002, 20: 843-849.

[153] LiC, ZengR. Optical voltage sensor using single Fresnel Rhomb Bi₄Ge₃O₁₂ crystal. IEEE Sensors J., 2014, 14: 1.

[154] FusiekG, NiewczasP, McDonaldJR. Feasibility study of the application of optical voltage and current sensors and an arrayed waveguide grating for aero-electrical systems. Sens. Actuat. A Phys., 2008, 147: 177-182.

[155] WangPF, SemenovaY, WuQ, et al. . A fiber-optic voltage sensor based on macrobending structure. Opt. Laser Technol., 2011, 43: 922-925.

[156] YangHR, LiZX, LiuDL, et al. . Initial nonreciprocal phase shift measurement method for reflective fiber optical voltage sensor. IEEE Trans. Instrum. Meas., 2024, 73: 1-7.

[157] YouY, ZhuGQ, LiYY, et al. . 17-Cell battery monitoring analog front end with high sampling accuracy for battery pack applications. Microelectron. J., 2024, 151. 106327

[158] Shi, Q.Q., Tang, W., Lv, Q.S.: A high precision voltage detection circuit for multiple lithium batteries. In: 2022 7th International Conference on Integrated Circuits and Microsystems (ICICM). Xi’an, China. IEEE, pp. 60–66(2022). https://doi.org/10.1109/icicm56102.2022.10011305

[159] HuXS, FengF, LiuKL, et al. . State estimation for advanced battery management: key challenges and future trends. Renew. Sustain. Energy Rev., 2019, 114. 109334

[160] LyuPZ, LiuXJ, QuJ, et al. . Recent advances of thermal safety of lithium ion battery for energy storage. Energy Storage Mater., 2020, 31: 195-220.

[161] QianZ, LiYM, RaoZH. Thermal performance of lithium-ion battery thermal management system by using mini-channel cooling. Energy Convers. Manag., 2016, 126: 622-631.

[162] China Electric Power Research Institute Co., Ltd., Institute of Energy Storage and Electrical Technology: Accident analysis of Beijing Jimei Dahongmen 25 MWh DC optical storage and charging integrated power plant project. https://cityfire.com/wp-content/uploads/2024/01/CHina-BESS-failure-tranlated-pdf.pdf (2021). Accessed 19 Mar 2025

[163] MaoBB, HuangPF, ChenHD, et al. . Self-heating reaction and thermal runaway criticality of the lithium ion battery. Int. J. Heat Mass Transf., 2020, 149. 119178

[164] FengXN, FangM, HeXM, et al. . Thermal runaway features of large format prismatic lithium ion battery using extended volume accelerating rate calorimetry. J. Power. Sources, 2014, 255: 294-301.

[165] SmithK, WangCY. Power and thermal characterization of a lithium-ion battery pack for hybrid-electric vehicles. J. Power. Sources, 2006, 160: 662-673.

[166] LiuHQ, WeiZB, HeWD, et al. . Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: a review. Energy Convers. Manag., 2017, 150: 304-330.

[167] ZhangCP, JiangJC, GaoY, et al. . Charging optimization in lithium-ion batteries based on temperature rise and charge time. Appl. Energy, 2017, 194: 569-577.

[168] GriffithsHJ. Encyclopedia of medical devices and instrumentation. Radiology, 1989, 170: 1016.

[169] The introduction to thermistor from Baidu encyclopedia. https://baike.baidu.com/item/%E7%83%AD%E6%95%8F%E7%94%B5%E9%98%BB?fromModule=lemma_search-box. (2024). Accessed 19 Mar 2025

[170] CaoJ, EmadiA. Batteries need electronics. EEE Ind. Electron. Mag., 2011, 5: 27-35.

[171] WaldmannT, BisleG, HoggBI, et al. . Influence of cell design on temperatures and temperature gradients in lithium-ion cells: an in operando study. J. Electrochem. Soc., 2015, 162: A921-A927.

[172] DebertM, ColinG, BlochG, et al. . An observer looks at the cell temperature in automotive battery packs. Contr. Eng. Pract., 2013, 21: 1035-1042.

[173] CaiQJ, ChenYC, TsaiC, et al. . Development of a platinum resistance thermometer on the silicon substrate for phase change studies. J. Micromech. Microeng., 2012, 22. 085012

[174] DaudZHC, ChrenkoD, Dos SantosF, et al. . 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. Int. J. Energy Res., 2016, 40: 1144-1154.

[175] ChaliseD, ShahK, HalamaT, et al. . An experimentally validated method for temperature prediction during cyclic operation of a Li-ion cell. Int. J. Heat Mass Transf., 2017, 112: 89-96.

[176] LuY, WangXD, MaoSY, et al. . Smart batteries enabled by implanted flexible sensors. Energy Environ. Sci., 2023, 16: 2448-2463.

[177] WangPD, ZhangXY, YangL, et al. . Real-time monitoring of internal temperature evolution of the lithium-ion coin cell battery during the charge and discharge process. Extreme Mech. Lett., 2016, 9: 459-466.

[178] FlemingJ, AmietszajewT, CharmetJ, et al. . The design and impact of in situ and operando thermal sensing for smart energy storage. J. Energy Storage, 2019, 22: 36-43.

[179] ZhuSX, HanJD, AnHY, et al. . A novel embedded method for in situ measuring internal multi-point temperatures of lithium ion batteries. J. Power. Sources, 2020, 456. 227981

[180] LeeCY, LeeSJ, TangMS, et al. . In situ monitoring of temperature inside lithium-ion batteries by flexible micro temperature sensors. Sensors, 2011, 11: 9942-9950.

[181] Arman KuzubasogluB, Kursun BahadirS. Flexible temperature sensors: a review. Sens. Actuat. A Phys., 2020, 315. 112282

[182] The introduction to thermocouple from Baidu encyclopedia. https://baike.baidu.com/item/%E7%83%AD%E7%94%B5%E5%81%B6/5028266. (2024). Acessed 19 Mar 2025

[183] ChildsPRN, GreenwoodJR, LongCA. Review of temperature measurement. Rev. Sci. Instrum., 2000, 71: 2959-2978.

[184] XiaoM, ChoeSY. Theoretical and experimental analysis of heat generations of a pouch type LiMn₂O₄/carbon high power Li-polymer battery. J. Power. Sources, 2013, 241: 46-55.

[185] ChackoS, ChungYM. Thermal modelling of Li-ion polymer battery for electric vehicle drive cycles. J. Power. Sources, 2012, 213: 296-303.

[186] WangT, TsengKJ, ZhaoJY, et al. . Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies. Appl. Energy, 2014, 134: 229-238.

[187] DrakeSJ, MartinM, WetzDA, et al. . Heat generation rate measurement in a Li-ion cell at large C-rates through temperature and heat flux measurements. J. Power. Sources, 2015, 285: 266-273.

[188] AnthonyD, WongD, WetzD, et al. . Non-invasive measurement of internal temperature of a cylindrical Li-ion cell during high-rate discharge. Int. J. Heat Mass Transf., 2017, 111: 223-231.

[189] ZhangGS, CaoL, GeSH, et al. . In situ measurement of radial temperature distributions in cylindrical Li-ion cells. J. Electrochem. Soc., 2014, 161: A1499-A1507.

[190] LiZ, ZhangJB, WuB, et al. . Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples. J. Power. Sources, 2013, 241: 536-553.

[191] MutyalaMSK, ZhaoJZ, LiJY, et al. . In situ temperature measurement in lithium ion battery by transferable flexible thin film thermocouples. J. Power. Sources, 2014, 260: 43-49.

[192] MartinyN, RheinfeldA, GederJ, et al. . Development of an all kapton-based thin-film thermocouple matrix for in situ temperature measurement in a lithium ion pouch cell. IEEE Sensors J., 2014, 14: 3377-4338.

[193] DuanJ, TangX, DaiHF, et al. . Building safe lithium-ion batteries for electric vehicles: A review. Electrochem. Energy Rev., 2020, 3: 1-42.

[194] LiuP, YangLY, XiaoBW, et al. . Revealing lithium battery gas generation for safer practical applications. Adv. Funct. Mater., 2022, 32: 2208586.

[195] AikenCP, SelfJ, PetibonR, et al. . A survey of in situ gas evolution during high voltage formation in Li-ion pouch cells. J. Electrochem. Soc., 2015, 162: A760.

[196] AurbachD. Review of selected electrode-solution interactions which determine the performance of Li and Li ion batteries. J. Power. Sources, 2000, 89: 206-218.

[197] WangQS, PingP, ZhaoXJ, et al. . Thermal runaway caused fire and explosion of lithium ion battery. J. Power. Sources, 2012, 208: 210-224.

[198] LiuX, RenDS, HsuH, et al. . Thermal runaway of lithium-ion batteries without internal short circuit. Joule, 2018, 2: 2047-2064.

[199] XieQ, CuiZH, ManthiramA. Unveiling the stabilities of nickel-based layered oxide cathodes at an identical degree of delithiation in lithium-based batteries. Adv. Mater., 2021, 33: 2100804.

[200] LammerM, KönigsederA, HackerV. Holistic methodology for characterisation of the thermally induced failure of commercially available 18650 lithium ion cells. RSC Adv., 2017, 7: 24425-24429.

[201] GolubkovAW, ScheiklS, PlanteuR, et al. . Thermal runaway of commercial 18650 Li-ion batteries with LFP and NCA cathodes: impact of state of charge and overcharge. RSC Adv., 2015, 5: 57171-57186.

[202] Cai, T., Valecha, P., Tran, V., et al.: Detection of Li-ion battery failure and venting with Carbon Dioxide sensors. eTransportation 7, 100100(2021). https://doi.org/10.1016/j.etran.2020.100100

[203] SpinelleL, GerbolesM, KokG, et al. . Review of portable and low-cost sensors for the ambient air monitoring of benzene and other volatile organic compounds. Sensors, 2017, 17: 1520.

[204] SGX sensortech: Electrochemical Sensors Application Note 2 Design of Electronics for Electrochemical Gas Sensors. https://www.sgxsensortech.com/content/uploads/2014/08/A1A-EC_SENSORS_AN2-Design-of-Electronics-for-EC-Sensors-V4.pdf. (2014). Accessed 19 Mar 2025

[205] LiaoZH, ZhangS, LiK, et al. . A survey of methods for monitoring and detecting thermal runaway of lithium-ion batteries. J. Power. Sources, 2019, 436. 226879

[206] WatsonJ, IhokuraK, ColesGV. The tin dioxide gas sensor. Meas. Sci. Technol., 1993, 4: 711-719.

[207] DigiKey: Sensirion ag sgp40-d-r4 sensor. https://www.digikey.com/en/products/detail/sensirion-ag/SGP40-D-R4/12820418. Accessed 19 Mar 2025

[208] DigiKey. Amphenol sgx sensortech mics-vz-89te. https://www.digikey.com/en/products/detail/amphenol-sgx-sensortech/MICS-VZ-89TE/7102285. Accessed 19 Mar 2025

[209] Hasanaj, R., Abuhemidan, A.: Air-quality sensor with 10-years lifespan. https://researchportal.hkr.se/en/studentTheses/air-quality-sensor-with-10-years-lifespan-2 (2019). Accessed 19 Mar 2025

[210] ZhouR, VaihingerS, GeckelerKE, et al. . Reliable CO₂ sensors with silicon-based polymers on quartz microbalance transducers. Sens. Actuat. B Chem., 1994, 19: 415-420.

[211] GibsonD, MacGregorC. A novel solid state non-dispersive infrared CO₂ gas sensor compatible with wireless and portable deployment. Sensors, 2013, 13: 7079-7103.

[212] Shrestha, S.S.: Performance evaluation of carbon-dioxide sensors used in building HVAC applications. https://doi.org/10.31274/ETD-180810-364 (2009). Accessed 19 Mar 2025

[213] Amphenol: Amphenol advanced sensors Telaire T6700 series. https://www.amphenol-sensors.com/en/telaire/co2/525-co2-sensor-modules/3215-t6700. Accessed 19 Mar 2025

[214] MateevV, MarinovaI, KartunovZ, et al. . Gas Leakage Source Detection for Li-Ion Batteries by Distributed Sensor Array. Sensors, 2019, 19: 13.

[215] Hanway Electronics Ltd.: MQ7 Gas Sensor, Technical Data. Available online: http://www.hwsensor.com (2017). Accessed 25 June 2019

[216] WangZ, ZhuL, LiuJW, et al. . Gas sensing technology for the detection and early warning of battery thermal runaway: a review. Energy Fuels, 2022, 36: 6038-6057.

[217] JinY, ZhengZK, WeiDH, et al. . Detection of micro-scale Li dendrite via H₂ gas capture for early safety warning. Joule, 2020, 4: 1714-1729.

[218] ChengKWE, DivakarBP, WuHJ, et al. . Battery management system (BMS) and SOC development for electrical vehicles. IEEE Trans. Veh. Technol., 2011, 60: 76-88.

[219] Anand, S., Shreeram, V., Sandeep, G., et al.: Battery management system (BMS) for electric vehicle applications. ICERECT 1–6 https://doi.org/10.1109/ICERECT56837.2022.10060137. (2022). Accessed 19 Mar 2025

[220] National public service platform for standard information (GB): The draft revision of GB38031–2020. (2023). 28 Dec 2023

[221] YangSJ, ZhangCP, JiangJC, et al. . Review on state-of-health of lithium-ion batteries: characterizations, estimations and applications. J. Clean. Prod., 2021, 314. 128015

[222] HabibAKMA, HasanMK, IssaGF, et al. . Lithium-ion battery management system for electric vehicles: constraints, challenges, and recommendations. Batteries, 2023, 9: 152.

[223] Liu, V.T., Hsieh, Y.C., Wu, J.M., et al.: New type equalization circuit and management system of Li-ion battery. In: 11th IEEE International Conference on Control & Automation (ICCA). Taichung, Taiwan, China. IEEE, pp. 1056–1060 (2014). https://doi.org/10.1109/icca.2014.6871066

[224] ChungY, KimMS. Thermal analysis and pack level design of battery thermal management system with liquid cooling for electric vehicles. Energy Convers. Manag., 2019, 196: 105-116.

[225] ChenMY, ZhuMH, ZhaoLY, et al. . Study on thermal runaway propagation inhibition of battery module by flame-retardant phase change material combined with aerogel felt. Appl. Energy, 2024, 367. 123394

[226] ZhangFJ, ZangYP, HuangDZ, et al. . Flexible and self-powered temperature–pressure dual-parameter sensors using microstructure-frame-supported organic thermoelectric materials. Nat. Commun., 2015, 6: 8356.

[227] YiF, JiaqiangE, ZhangB, et al. . Effects analysis on heat dissipation characteristics of lithium-ion battery thermal management system under the synergism of phase change material and liquid cooling method. Renew. Energy, 2022, 181: 472-489.

[228] JilteR, AfzalA, PanchalS. A novel battery thermal management system using nano-enhanced phase change materials. Energy, 2021, 219. 119564

[229] SingirikondaS, ObulesuYP. Active cell voltage balancing of Electric vehicle batteries by using an optimized switched capacitor strategy. J. Energy Storage, 2021, 38. 102521

[230] XiongR, YangRX, ChenZY, et al. . Online fault diagnosis of external short circuit for lithium-ion battery pack. IEEE Trans. Ind. Electron., 2020, 67: 1081-1091.

[231] LiA, WengJW, YuenACY, et al. . Machine learning assisted advanced battery thermal management system: a state-of-the-art review. J. Energy Storage, 2023, 60. 106688

[232] XiongR, CaoJY, YuQQ, et al. . Critical review on the battery state of charge estimation methods for electric vehicles. IEEE Access, 2018, 6: 1832-1843.

[233] ZouY, HuXS, MaHM, et al. . Combined state of charge and state of health estimation over lithium-ion battery cell cycle lifespan for electric vehicles. J. Power. Sources, 2015, 273: 793-803.

[234] Domenico, D., Fiengo, G., Stefanopoulou, A.: Lithium-ion battery state of charge estimation with a kalman filter based on an electrochemical model. CCTA 3–5 (2008). https://doi.org/10.1109/CCA.2008.4629639

[235] Huang, M., Kumar, M.: Electrochemical model-based aging characterization of lithium-ion battery cell in electrified vehicles. In: ASME 2018 Dynamic Systems and Control Conference Atlanta, Georgia, USA. https://doi.org/10.1115/DSCC2018-8947

[236] LaiX, WangSY, MaSD, et al. . Parameter sensitivity analysis and simplification of equivalent circuit model for the state of charge of lithium-ion batteries. Electrochim. Acta, 2020, 330. 135239

[237] FarmannA, SauerDU. Comparative study of reduced order equivalent circuit models for on-board state-of-available-power prediction of lithium-ion batteries in electric vehicles. Appl. Energy, 2018, 225: 1102-1122.

[238] GuJ, BarkerD, PechtM. Prognostics implementation of electronics under vibration loading. Microelectron. Reliab., 2007, 47: 1849-1856.

[239] GuhaA, PatraA. State of health estimation of lithium-ion batteries using capacity fade and internal resistance growth models. IEEE Trans. Transp. Electrific., 2018, 4: 135-146.

[240] ShenP, OuyangMG, LuLG, et al. . The co-estimation of state of charge, state of health, and state of function for lithium-ion batteries in electric vehicles. IEEE Trans. Veh. Technol., 2018, 67: 92-103.

[241] CacciatoM, NobileG, ScarcellaG, et al. . Real-time model-based estimation of SOC and SOH for energy storage systems. IEEE Trans. Power Electron., 2017, 32: 794-803.

[242] Moharm, K., Eltahan, M., Immonen, E.: Big data driven battery management systems. SUMMA 987–992 https://doi.org/10.1109/SUMMA50634.2020.9280667 (2020). Accessed 19 Mar 2025

[243] FineganDP, ZhuJE, FengXN, et al. . The application of data-driven methods and physics-based learning for improving battery safety. Joule, 2021, 5: 316-329.

[244] ChenM, WangHQ, LiuXP. Adaptive fuzzy practical fixed-time tracking control of nonlinear systems. IEEE Trans. Fuzzy Syst., 2021, 29: 664-673.

[245] KlassV, BehmM, LindberghG. Evaluating real-life performance of lithium-ion battery packs in electric vehicles. J. Electrochem. Soc., 2012, 159: A1856-A1860.

[246] FengXN, WengCH, HeXM, et al. . Online state-of-health estimation for Li-ion battery using partial charging segment based on support vector machine. IEEE Trans. Veh. Technol., 2019, 68: 8583-8592.

[247] QinTC, ZengSK, GuoJB, et al. . A rest time-based prognostic framework for state of health estimation of lithium-ion batteries with regeneration phenomena. Energies, 2016, 9: 896.

[248] KimS, ParkHJ, ChoiJH, et al. . A novel prognostics approach using shifting kernel particle filter of Li-ion batteries under state changes. IEEE Trans. Ind. Electron., 2021, 68: 3485-3493.

[249] LiuTY, SunQ, FengJ, et al. . Residual life estimation under time-varying conditions based on a Wiener process. J. Stat. Comput. Simul., 2017, 87: 211-226.

[250] JinG, MatthewsDE, ZhouZB. A Bayesian framework for on-line degradation assessment and residual life prediction of secondary batteries inspacecraft. Reliab. Eng. Syst. Saf., 2013, 113: 7-20.

[251] FengJ, KvamP, TangYZ. Remaining useful lifetime prediction based on the damage-marker bivariate degradation model: a case study on lithium-ion batteries used in electric vehicles. Eng. Fail. Anal., 2016, 70: 323-342.

[252] SongZC, MaXJ, HuangCY, et al. . Computationally aided design of single-ion-conducting block copolymer electrolytes to boost lithium-ion conductivity. Polym. Int., Computationally aided design of single–ion–conducting block copolymer electrolytes to boost lithium–ion conductivity. Polym. Int., 2024.

[253] RenL, DongJ, WangX, et al. . A data-driven auto-CNN-LSTM prediction model for lithium-ion battery remain useful life. IEEE Trans. Ind. Inform., 2020, 17: 5.

[254] TanYD, ZhaoGC. Transfer learning with long short-term memory network for state-of-health prediction of lithium-ion batteries. IEEE Trans. Ind. Electron., 2020, 67: 8723-8731.

[255] Li, C.R., Xiao, F., Fan, Y.X., et al.: A recurrent neural network with long short-term memory for state of charge estimation of lithium-ion batteries. In: 2019 IEEE 8th Joint International Information Technology and Artificial Intelligence Conference (ITAIC). Chongqing, China. IEEE, pp. 1712–1716 (2019). https://doi.org/10.1109/itaic.2019.8785770

[256] SinagaKP, YangMS. Unsupervised K-means clustering algorithm. IEEE Access, 2020, 8: 80716-80727.

[257] Li, X.J., Li, J.W., Abdollahi, A., et al.: Data-driven thermal anomaly detection for batteries using unsupervised shape clustering. In: 2021 IEEE 30th International Symposium on Industrial Electronics (ISIE). Kyoto, Japan. IEEE, 1–6 (2021). https://doi.org/10.1109/isie45552.2021.9576348

[258] WuTZ, KangJ, ZhuJC, et al. . Lithium-ion battery health state estimation based on feature reconstruction and optimized least squares support vector machine. J. Electrochem. Energy Convers. Storage, 2025, 22. 011013

[259] BroR, SmildeAK. Principal component analysis. Anal. Methods, 2014, 6: 2812-2831.

[260] Natella, D., Vasca, F.: Battery state of health estimation via reinforcement learning. In: 2021 European Control Conference (ECC). Delft, Netherlands. IEEE, pp. 1657–1662 (2021). https://doi.org/10.23919/ecc54610.2021.9655199

[261] HeJR, YangTY, XieL, et al. . A data-driven reinforcement learning enabled battery fast charging optimization using real-world experimental data. IEEE Trans. Ind. Electron., 2025, 72: 430-438.

[262] ChowdhuryMA, Al-WahaibiSSS, LuQG. Adaptive safe reinforcement learning-enabled optimization of battery fast-charging protocols. AlChE. J., 2025, 71. e18605

[263] HaoYH, LuQG, WangXZ, et al. . Adaptive model-based reinforcement learning for fast-charging optimization of lithium-ion batteries. IEEE Trans. Ind. Inf., 2024, 20: 127-137.

[264] Triki, M., Ammari, A.C., Wang, Y.Z., et al.: Reinforcement learning-based dynamic power management of a battery-powered system supplying multiple active modes. In: 2013 European Modelling Symposium. Manchester, United Kingdom. IEEE, pp. 437–442(2013). https://doi.org/10.1109/ems.2013.74

[265] Xiao, Y., Lin, C.J., Fahimi, B.: Online State of Charge estimation in electrochemical batteries: Application of pattern recognition techniques. In: 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC). Long Beach, CA, USA. IEEE, pp. 2474–2478(2013). https://doi.org/10.1109/apec.2013.6520643

[266] SunSY, YangQ, YanWJ. A novel Markov-based temporal-SOC analysis for characterizing PEV charging demand. IEEE Trans. Ind. Inf., 2018, 14: 156-166.

[267] AbbarajuP, KunduSK. A novel federated & ensembled learning-based battery state-of-health estimation for connected electric vehicles. IEEE Open J. Intell. Transp. Syst., 2024, 5: 445-453.

[268] HanTF, YueS, YangP, et al. . Source-free dynamic weighted federated transfer learning for state-of-health estimation of lithium-ion batteries with data privacy. IEEE Trans. Power Electron., 2024, 39: 15085-15100.

[269] WangTJ, DongZY, XiongHB. Adaptive multipersonalized federated learning for state of health estimation of multiple batteries. IEEE Internet Things J., 2024, 11: 39994-40008.

[270] GongQR, WangP, ChengZ. A data-driven model framework based on deep learning for estimating the states of lithium-ion batteries. J. Electrochem. Soc., 2022, 169. 030532

[271] ChoG, WangMQ, KimY, et al. . A physics-informed machine learning approach for estimating lithium-ion battery temperature. IEEE Access, 2022, 10: 88117-88126.

[272] Ojo, O.J., Lin, X.K., Lang, H.X., et al.: A voltage fault detection method enabled by A recurrent neural network and residual threshold monitor for lithium-ion batteries. In: 2021 IEEE Transportation Electrification Conference & Expo (ITEC). Chicago, IL, USA. IEEE, pp. 813–820(2021). https://doi.org/10.1109/itec51675.2021.9490102

[273] Lu, D., Cui, N.X., Li, C.L.: A multi-attention mechanisms based transfer learning framework for state of health estimation of lithium-ion battery. In: 2022 4th International Conference on Smart Power & Internet Energy Systems (SPIES). Beijing, China. IEEE, pp. 1874–1879(2022). https://doi.org/10.1109/spies55999.2022.10082222

[274] WangX, HeJJ, ShenS, et al. . A cell screening method for lithium-ion battery grouping based on pre-trained data-driven model with multi-source time series data. J. Energy Storage, 2024, 85. 110902

[275] StallardJC, WheatcroftL, BoothSG, et al. . Mechanical properties of cathode materials for lithium-ion batteries. Joule, 2022, 6: 984-1007.

[276] LeeJH, LeeHM, AhnS. Battery dimensional changes occurring during charge/discharge cycles: thin rectangular lithium ion and polymer cells. J. Power. Sources, 2003, 119: 833-837.

[277] GuJB, LiangZT, ShiJW, et al. . Electrochemo-mechanical stresses and their measurements in sulfide-based all-solid-state batteries: a review. Adv. Energy Mater., 2023, 13: 2203153.

[278] KoyamaY, ChinTE, RhynerU, et al. . Harnessing the actuation potential of solid-state intercalation compounds. Adv. Funct. Mater., 2006, 16: 492-498.

[279] De BiasiL, SchieleA, Roca-AyatsM, et al. . Phase transformation behavior and stability of LiNiO₂ cathode material for Li-ion batteries obtained from in situ gas analysis and operando X-ray diffraction. Chemsuschem, 2019, 12: 2240-2250.

[280] ChoiJ, ManthiramA. Role of chemical and structural stabilities on the electrochemical properties of layered LiNi_1/3Mn_1/3Co_1/3O₂ cathodes. J. Electrochem. Soc., 2005, 152: A1714.

[281] de BiasiL, KondrakovAO, GeßweinH, et al. . Between Scylla and Charybdis: balancing among structural stability and energy density of layered NCM cathode materials for advanced lithium-ion batteries. J. Phys. Chem. C, 2017, 121: 26163-26171.

[282] YoonWS, ChungKY, McBreenJ, et al. . A comparative study on structural changes of LiCo_1/3Ni_1/3Mn_1/3O₂ and LiNi_0.8Co_0.15Al_0.05O₂ during first charge using in situ XRD. Electrochem. Commun., 2006, 8: 1257-1262.

[283] WuFX, YushinG. Conversion cathodes for rechargeable lithium and lithium-ion batteries. Energy Environ. Sci., 2017, 10: 435-459.

[284] SanthoshaAL, NazerN, KoerverR, et al. . Macroscopic displacement reaction of copper sulfide in lithium solid-state batteries. Adv. Energy Mater., 2020, 10: 2002394.

[285] OhzukuT, UedaA, YamamotoN. Zero-strain insertion material of Li[Li_1/3Ti_5/3]O₄ for rechargeable lithium cells. J. Electrochem. Soc., 1995, 142: 1431-1435.

[286] QiY, GuoHB, HectorLG, et al. . Threefold increase in the Young’s modulus of graphite negative electrode during lithium intercalation. J. Electrochem. Soc., 2010, 157: A558.

[287] BeaulieuLY, EbermanKW, TurnerRL, et al. . Colossal reversible volume changes in lithium alloys. Electrochem. Solid-State Lett., 2001, 4: A137.

[288] ZhangWB, SchröderD, ArltT, et al. . (Electro)chemical expansion during cycling: monitoring the pressure changes in operating solid-state lithium batteries. J. Mater. Chem. A, 2017, 5: 9929-9936.

[289] ZhouWC, UpretiS, WhittinghamMS. Electrochemical performance of Al-Si-graphite composite as anode for lithium-ion batteries. Electrochem. Commun., 2011, 13: 158-161.

[290] SchieleA, HatsukadeT, BerkesBB, et al. . High-throughput in situ pressure analysis of lithium-ion batteries. Anal. Chem., 2017, 89: 8122-8128.

[291] OhKY, SiegelJB, SecondoL, et al. . Rate dependence of swelling in lithium-ion cells. J. Power. Sources, 2014, 267: 197-202.

[292] KoerverR, ZhangWB, de BiasiL, et al. . Chemo-mechanical expansion of lithium electrode materials: on the route to mechanically optimized all-solid-state batteries. Energy Environ. Sci., 2018, 11: 2142-2158.

[293] MistryA, MukherjeePP. Molar volume mismatch: a malefactor for irregular metallic electrodeposition with solid electrolytes. J. Electrochem. Soc., 2020, 167. 082510

[294] GuJB, ChenXX, HeZF, et al. . Decoding internal stress-induced micro-short circuit events in sulfide-based all-solid-state Li-metal batteries via operando pressure measurements. Adv. Energy Mater., 2023, 13: 2302643.

[295] HanSY, LeeC, LewisJA, et al. . Stress evolution during cycling of alloy-anode solid-state batteries. Joule, 2021, 5: 2450-2465.

[296] ShalabiN, SearlesK, TakahataK. Switch mode capacitive pressure sensors. Microsyst. Nanoeng., 2022, 8: 132.

[297] FiorilloAS, CritelloCD, PullanoSA. Theory, technology and applications of piezoresistive sensors: a review. Sens. Actuat. A Phys., 2018, 281: 156-175.

[298] LouliAJ, EllisLD, DahnJR. Operando pressure measurements reveal solid electrolyte interphase growth to rank Li-ion cell performance. Joule, 2019, 3: 745-761.

[299] PengYE, QiW, ChenY, et al. . Wireless sensor power supply based on eddy currents for structural health monitoring. IEEE Trans. Ind. Electron., 2024, 71: 7252-7261.

[300] KnoblochA, KapustaC, KarpJ, et al. . Fabrication of multi-measurand sensor for monitoring of a Li-ion battery. J. Electron. Packag., 2018, 140. 031002

[301] Choi, W., Seo, Y., Yoo, K., et al.: Carbon nanotube-based strain sensor for excessive swelling detection of lithium-ion battery. In: 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems & Eurosensors XXXIII (TRANSDUCERS & EUROSENSORS XXXIII). Berlin, Germany. IEEE, pp. 2356–2359(2019). https://doi.org/10.1109/transducers.2019.8808477

[302] HteinL, LiuZY, GunawardenaD, et al. . Single-ring suspended fiber for Bragg grating based hydrostatic pressure sensing. Opt. Express, 2019, 27: 9655.

[303] RaoYJ. Recent progress in applications of in-fibre Bragg grating sensors. Opt. Lasers Eng., 1999, 31: 297-324.

[304] CampanellaCE, CuccovilloA, CampanellaC, et al. . Fibre Bragg grating based strain sensors: review of technology and applications. Sensors, 2018, 18: 3115.

[305] KinetD, MégretP, GoossenK, et al. . Fiber Bragg grating sensors toward structural health monitoring in composite materials: Challenges and solutions. Sensors, 2014, 14: 7394-7419.

[306] SinghAK, BerggrenS, ZhuY, et al. . Simultaneous strain and temperature measurement using a single fiber Bragg grating embedded in a composite laminate. Smart Mater. Struct., 2017, 26. 115025

[307] SahotaJK, GuptaN, DhawanD. Fiber Bragg grating sensors for monitoring of physical parameters: a comprehensive review. Opt. Eng., 2020, 59: 1.

[308] SommerLW, KieselP, GanguliA, et al. . Fast and slow ion diffusion processes in lithium ion pouch cells during cycling observed with fiber optic strain sensors. J. Power. Sources, 2015, 296: 46-52.

[309] SommerLW, RaghavanA, KieselP, et al. . Monitoring of intercalation stages in lithium-ion cells over charge-discharge cycles with fiber optic sensors. J. Electrochem. Soc., 2015, 162: A2664-A2669.

[310] SommerLW, RaghavanA, KieselP, et al. . Embedded fiber optic sensing for accurate state estimation in advanced battery management systems. MRS Online Proc. Libr., 2014, 1681: 1-7.

[311] PengJ, ZhouX, JiaSH, et al. . High precision strain monitoring for lithium ion batteries based on fiber Bragg grating sensors. J. Power. Sources, 2019, 433. 226692

[312] Abdul RazakAH, ZayeghA, BeggRK, et al. . Foot plantar pressure measurement system: a review. Sensors, 2012, 12: 9884-9912.

[313] PannalaS, ZhangMX, SiegelJB, et al. . Mechanical measurements for early detection of thermal runaway induced by an internal short circuit. Meet. Abstr., 2018, MA2018–013368.

[314] BaeCJ, ManandharA, KieselP, et al. . Monitoring the strain evolution of lithium-ion battery electrodes using an optical fiber Bragg grating sensor. Energy Technol., 2016, 4: 851-855.

[315] Albero BlanquerL, MarchiniF, SeitzJR, et al. . Optical sensors for operando stress monitoring in lithium-based batteries containing solid-state or liquid electrolytes. Nat. Commun., 2022, 13: 1153.

[316] SchwartzJ, ArakakiK, KieselP, et al. . Embedded fiber optic sensors for in situ and in operando monitoring of advanced batteries. MRS Online Proc. Libr., 2014, 1740: 7-12.

[317] RaghavanA, KieselP, SommerLW, et al. . Embedded fiber-optic sensing for accurate internal monitoring of cell state in advanced battery management systems part 1: cell embedding method and performance. J. Power. Sources, 2017, 341: 466-473.

[318] NedjalkovA, MeyerJ, GräfensteinA, et al. . Refractive index measurement of lithium ion battery electrolyte with etched surface cladding waveguide Bragg gratings and cell electrode state monitoring by optical strain sensors. Batteries, 2019, 5: 30.

[319] MeiWX, LiuZ, WangCD, et al. . Operando monitoring of thermal runaway in commercial lithium-ion cells via advanced lab-on-fiber technologies. Nat. Commun., 2023, 14: 5251.

[320] NascimentoM, NovaisS, DingMS, et al. . Internal strain and temperature discrimination with optical fiber hybrid sensors in Li-ion batteries. J. Power. Sources, 2019, 410: 1-9.

[321] HuangJQ, BolesST, TarasconJM. Sensing as the key to battery lifetime and sustainability. Nat. Sustain., 2022, 5: 194-204.

[322] AlbertJ, ShaoLY, CaucheteurC. Tilted fiber Bragg grating sensors. Laser Photonics Rev., 2013, 7: 83-108.

[323] JamesS, TatamRP. Optical fibre long-period grating sensors: characteristics and application. Meas. Sci. Technol., 2003, 14: R49-R61.

[324] VengsarkarA, BerganoN, DavidsonC, et al. . Long-period fiber-grating-based gain equalizers. Opt. Lett., 1996, 21: 336-338.

[325] BaiZY, ZhangWG, GaoSC, et al. . Simultaneous measurement of strain and temperature using a long period fiber grating based on waist-enlarged fusion bitapers. J. Opt., 2014, 16. 045401

[326] Marrec, L., Bourgerette, T., Datin, E., et al.: In situ optical fibre sensors for temperature and salinity monitoring. In: Europe Oceans 2005. Brest, France. IEEE, pp. 1276–1278 Vol. 2(2005). https://doi.org/10.1109/oceanse.2005.1513243

[327] LaoJJ, SunP, LiuF, et al. . In situ plasmonic optical fiber detection of the state of charge of supercapacitors for renewable energy storage. Light. Sci. Appl., 2018, 7: 34.

[328] Leal-JuniorAG, DíazCAR, FrizeraA, et al. . Simultaneous measurement of pressure and temperature with a single FBG embedded in a polymer diaphragm. Opt. Laser Technol., 2019, 112: 77-84.

[329] MeyerJ, NedjalkovA, PichlerE, et al. . Development of a polymeric arrayed waveguide grating interrogator for fast and precise lithium-ion battery status monitoring. Batteries, 2019, 5: 66.

[330] PietschP, WoodV. X-ray tomography for lithium ion battery research: A practical guide. Annu. Rev. Mater. Res., 2017, 47: 451-479.

[331] LinF, LiuYJ, YuXQ, et al. . Synchrotron X-ray analytical techniques for studying materials electrochemistry in rechargeable batteries. Chem. Rev., 2017, 117: 13123-13186.

[332] Schmerr, L.: Fundamentals of Ultrasonic Non-destructive Evaluation. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-30463-2

[333] SiegelJB, LinXF, StefanopoulouAG, et al. . Neutron imaging of lithium concentration in LFP pouch cell battery. J. Electrochem. Soc., 2011, 158: A523-A529.

[334] Pitta BauermannL, MünchJ, KrollM, et al. . Nondestructive defect detection in battery pouch cells: A comparative study of scanning acoustic microscopy and X-ray computed tomography. Energy Technol., 2023, 11: 2300323.

[335] KeilP, JossenA. Impact of dynamic driving loads and regenerative braking on the aging of lithium-ion batteries in electric vehicles. J. Electrochem. Soc., 2017, 164: A3081-A3092.

[336] GuoR, LuLG, OuyangMG, et al. . Mechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries. Sci. Rep., 2016, 6: 30248.

[337] DayaniS, MarkötterH, von NiddaJK, et al. . Quantification of the deep discharge induced asymmetric copper deposition in lithium-ion cells by operando synchrotron X-ray tomography. Adv. Mater. Technol., 2024, 9: 2301246.

[338] GuoM, WhiteRE. Mathematical model for a spirally-wound lithium-ion cell. J. Power. Sources, 2014, 250: 220-235.

[339] ZhangY, GaoKY, MaTY, et al. . Intelligent recognition of structural health state of EV lithium-ion Battery using transfer learning based on X-ray computed tomography. Reliab. Eng. Syst. Saf., 2024, 251. 110374

[340] SampathS, YinXS, ThamZW, et al. . Real-time and non-contact estimation of state of charge for lithium-ion battery using laser ultrasonics. J. Power. Sources, 2024, 605. 234544

[341] McGeeTM, NeathB, MatthewsS, et al. . Ultrasonic inspection of lithium-ion pouch cells subjected to localized thermal abuse. J. Power. Sources, 2023, 583. 233542

[342] KEYENCE. The introduction of Keyence Digital ultrasonic sensor. https://www.keyence.com.cn/products/sensor/positioning/fw?aw=KC14kw0_11616837&bd_vid=9765416551703415266. Accessed 10 Mar 2025

[343] TDK: New high-performance ultrasonic ToF sensor. https://www.tdk.com.cn/zh/news_center/press/20220106_04.html. Accessed 10 Mar 2025

[344] ZhaoK, WanXH, LinY, et al. . Magnetic field-based non-destructive testing techniques for battery diagnostics. Adv. Energy Mater., 2025, 15: 2404295.

[345] BandT, KarraschB, PatzoldM, et al. . Simulation-trained neural networks for automatable crack detection in magnetic field images. J. Nondestruct. Eval., 2024, 43: 19.

[346] HuYN, IwataGZ, MohammadiM, et al. . Sensitive magnetometry reveals inhomogeneities in charge storage and weak transient internal currents in Li-ion cells. Proc. Natl. Acad. Sci. U. S. A., 2020, 117: 10667-10672.

[347] LeeMY, ShinY, ChangHJ, et al. . Diagnosis of current flow patterns inside fault-simulated Li-ion batteries via non-invasive, in operando magnetic field imaging. Small Meth., 2023, 7: 2300748.

[348] SuzukiS, OkadaH, YabumotoK, et al. . Non-destructive visualization of short circuits in lithium-ion batteries by a magnetic field imaging system. Jpn. J. Appl. Phys., 2021, 60: 056502.

[349] KaimW, FiedlerJ. Spectroelectrochemistry: the best of two worlds. Chem. Soc. Rev., 2009, 38: 3373.

[350] WangRL, ZhangHZ, LiuQY, et al. . Operando monitoring of ion activities in aqueous batteries with plasmonic fiber-optic sensors. Nat. Commun., 2022, 13: 547.

[351] HuangJQ, HanXL, LiuF, et al. . Monitoring battery electrolyte chemistry via in operando tilted fiber Bragg grating sensors. Energy Environ. Sci., 2021, 14: 6464-6475.

[352] JinYT, KneuselsNH, MagusinPCMM, et al. . Identifying the structural basis for the increased stability of the solid electrolyte interphase formed on silicon with the additive fluoroethylene carbonate. J. Am. Chem. Soc., 2017, 139: 14992-15004.

[353] LiuDQ, ShadikeZ, LinRQ, et al. . Review of recent development of in situ/operando characterization techniques for lithium battery research. Adv. Mater., 2019, 31: 1806620.

[354] ChenBB, ZhangH, XuanJ, et al. . Seeing is believing: in situ/operando optical microscopy for probing electrochemical energy systems. Adv. Mater. Technol., 2020, 5: 2000555.

[355] StancovskiV, BadilescuS. In situ Raman spectroscopic–electrochemical studies of lithium-ion battery materials: a historical overview. J. Appl. Electrochem., 2014, 44: 23-43.

[356] SaqibN, GanimCM, SheltonAE, et al. . On the decomposition of carbonate-based lithium-ion battery electrolytes studied using operando infrared spectroscopy. J. Electrochem. Soc., 2018, 165: A4051-A4057.

[357] JehnichenP, KorteC. Operando Raman spectroscopy measurements of a high-voltage cathode material for lithium-ion batteries. Anal. Chem., 2019, 91: 8054-8061.

[358] MatsuiM, DeguchiS, KuwataH, et al. . In operando FTIR spectroscopy for composite electrodes of lithium-ion batteries. Electrochemistry, 2015, 83: 874-878.

[359] El Idrissi El-BouzaidiY, AbdounO. Advances in artificial intelligence for accurate and timely diagnosis of COVID-19: a comprehensive review of medical imaging analysis. Sci. Afr., 2023, 22. e01961

[360] Zhang, H., Liao, W.L., Li, C., et al.: Discussion on multi-sensor information fusion in greenhouse detection system. In: 2017 International Conference on Smart Grid and Electrical Automation (ICSGEA). Changsha. IEEE, pp. 64–67(2017). https://doi.org/10.1109/icsgea.2017.30

[361] ShiJ, YangJX, JiangY, et al. . Development of a Broadband high-resolution X-ray spectrometer with new toroidally bent crystal. Opt. Commun., 2025, 575. 131289

[362] GaberščekM. Understanding Li-based battery materials via electrochemical impedance spectroscopy. Nat. Commun., 2021, 12: 6513.

[363] SchmidtJP, MankaD, KlotzD, et al. . Investigation of the thermal properties of a Li-ion pouch-cell by electrothermal impedance spectroscopy. J. Power. Sources, 2011, 196: 8140-8146.

[364] ChoiW, ShinHC, KimJM, et al. . Modeling and applications of electrochemical impedance spectroscopy (EIS) for lithium-ion batteries. J. Electrochem. Sci. Technol., 2020, 11: 1-13.

[365] WesterhoffU, KurbachK, LieneschF, et al. . Analysis of lithium-ion battery models based on electrochemical impedance spectroscopy. Energy Technol., 2016, 4: 1620-1630.

[366] XuJ, MiCC, CaoBG, et al. . A new method to estimate the state of charge of lithium-ion batteries based on the battery impedance model. J. Power. Sources, 2013, 233: 277-284.

[367] EckerM, GerschlerJB, VogelJ, et al. . Development of a lifetime prediction model for lithium-ion batteries based on extended accelerated aging test data. J. Power. Sources, 2012, 215: 248-257.

[368] RandviirEP, BanksCE. Electrochemical impedance spectroscopy: an overview of bioanalytical applications. Anal. Methods, 2013, 5: 1098.

[369] ZhuJG, SunZC, WeiXZ, et al. . A new lithium-ion battery internal temperature on-line estimate method based on electrochemical impedance spectroscopy measurement. J. Power. Sources, 2015, 274: 990-1004.

[370] OgiharaN, KawauchiS, OkudaC, et al. . Theoretical and experimental analysis of porous electrodes for lithium-ion batteries by electrochemical impedance spectroscopy using a symmetric cell. J. Electrochem. Soc., 2012, 159: A1034-A1039.

[371] LiSE, WangBJ, PengHE, et al. . An electrochemistry-based impedance model for lithium-ion batteries. J. Power. Sources, 2014, 258: 9-18.

[372] DoyleM, NewmanJ, GozdzAS, et al. . Comparison of modeling predictions with experimental data from plastic lithium ion cells. J. Electrochem. Soc., 1996, 143: 1890-1903.

[373] MingantR, BernardJ, MoynotVS, et al. . EIS measurements for determining the SOC and SOH of Li-ion batteries. ECS Trans., 2011, 33: 41.

[374] XiongR, PanY, ShenWX, et al. . Lithium-ion battery aging mechanisms and diagnosis method for automotive applications: recent advances and perspectives. Renew. Sustain. Energy Rev., 2020, 131. 110048

[375] GaleottiM, CinàL, GiammancoC, et al. . Performance analysis and SOH (state of health) evaluation of lithium polymer batteries through electrochemical impedance spectroscopy. Energy, 2015, 89: 678-686.

[376] Pastor-Fernandez, C., Dhammika Widanage, W., Marco, J., et al.: Identification and quantification of ageing mechanisms in lithium-ion batteries using the EIS technique. In: 2016 IEEE Transportation Electrification Conference and Expo (ITEC). Dearborn, MI. IEEE, pp. 1–6(2016). https://doi.org/10.1109/itec.2016.7520198

[377] DongTK, KirchevA, MatteraF, et al. . Dynamic modeling of Li-ion batteries using an equivalent electrical circuit. J. Electrochem. Soc., 2011, 158: A326.

[378] Datang NXP Semiconductors: Datang NXP Semiconductors develops battery management chips. https://www.datangnxp.com/ Accessed 19 Mar 2025

[379] LuXB, TarasconJM, HuangJQ. Perspective on commercializing smart sensing for batteries. eTransportation, 2022, 14: 100207.

[380] Cai, T., Pannala, S., Stefanopoulou, A.G., et al.: Battery internal short detection methodology using cell swelling measurements. In: 2020 American Control Conference (ACC). Denver, CO, USA. IEEE, pp. 1143–1148(2020). https://doi.org/10.23919/acc45564.2020.9147956

[381] RobinsonJB, EngebretsenE, FineganDP, et al. . Detection of internal defects in lithium-ion batteries using lock-in thermography. ECS Electrochem. Lett., 2015, 4: A106-A109.

[382] ZengYQ, ShenFY, ZhangBY, et al. . Nonintrusive thermal-wave sensor for operando quantification of degradation in commercial batteries. Nat. Commun., 2023, 14: 8203.

[383] LinJY, LiuXH, LiS, et al. . A review on recent progress, challenges and perspective of battery thermal management system. Int. J. Heat Mass Transf., 2021, 167. 120834

[384] ParhiziM, AhmedMB, JainA. Determination of the core temperature of a Li-ion cell during thermal runaway. J. Power. Sources, 2017, 370: 27-35.

[385] MananeY, YazamiR. Accurate state of charge assessment of lithium-manganese dioxide primary batteries. J. Power. Sources, 2017, 359: 422-426.

[386] Wang, Z., Yang, Y., Tong, X., et al.: Lithium-ion battery pack thermal runaway automatic alarming apparatus based on gas monitoring and monitoring method. CN108008083A, (2018). https://patents.google.com/patent/CN108008083A/en, 2018–05–08.

[387] Cummings, S., Swartz, S., Frank, N., et al.: Systems and methods for monitoring for a gas analyte. US20180003685A1, (2018). https://patents.google.com/patent/US20180003685A1/en, 2018–01–04.

[388] Lorentz, V.R.H., Wenger, M.M., Grosch, J.L., et al.: Novel cost-efficient contactless distributed monitoring concept for smart battery cells. In: 2012 IEEE International Symposium on Industrial Electronics. Hangzhou, China. IEEE, pp. 1342–1347(2012). https://doi.org/10.1109/isie.2012.6237285

[389] HanY, HanZ. Research on fire safety countermeasures for photovoltaic energy storage power stations based on fire analysis. Fire Sci. Technol., 2024, 43: 10

[390] WangJ, YangJ, BaiW, et al. . Thermal runaway and jet flame features of LIBs undergone high-rate charge/discharge: An investigation. J. Energy Chem., 2025, 103: 826-837.

Funding

National Key R&D Program of China(2022YFB3807700)

Fundamental Research Funds for the Central Universities

National Natural Science Foundation of China(52472047)

Natural Science Foundation of Hubei Province, China(2022CFA031)

Science, Technology and Innovation Commission of Shenzhen Municipality(JCYJ20210324135207020)

RIGHTS & PERMISSIONS

The Author(s)