High-Loading Dry-Electrode for all Solid-State Batteries: Nanoarchitectonic Strategies and Emerging Applications

Abstract

Abstract

Current battery research is primarily directed towards enhancing productivity optimization, reducing energy consumption, and improving battery performance, especially in addressing the hurdles of state-of-the-art battery production. The achievement of batteries with simultaneous high safety and energy density relies on the advancement of all-solid-state batteries utilizing robust solid electrodes and thin solid electrolytes. To achieve this, different electrode manufacturing processes from conventional techniques are required. Dry-electrode technology is an innovative concept and technique that enables the manufacture of electrodes through a "powder-film" route without the use of solvents. Dry-electrode technology can simplify manufacturing processes, restructure electrode microstructures, and enhance material compatibility. This review summarizes the concept and advantages of dry-electrode technology and discusses various efforts towards performance and efficiency enhancement. Dry-electrode technology is expected to contribute to the production capability of the next-generation battery industry with improved stability and energy density, promising a sustainable future.

Graphical Abstract

References

[1] Xing JL, Bliznakov S, Bonville Let al. . A review of nonaqueous electrolytes, binders, and separators for lithium-ion batteries. Electrochem. Energy Rev.. 2022, 5: 14.

[2] Qian HM, Ren HQ, Zhang Yet al. . Surface doping vs. bulk doping of cathode materials for lithium-ion batteries: a review. Electrochem. Energy Rev.. 2022, 52.

[3] Zhang L, Wu XK, Qian WWet al. . Exploring more functions in binders for lithium batteries. Electrochem. Energy Rev.. 2023, 636.

[4] Tan S, Shadike Z, Cai XYet al. . Review on low-temperature electrolytes for lithium-ion and lithium metal batteries. Electrochem. Energy Rev.. 2023, 635.

[5] Yoshino A. The lithium-ion battery: two breakthroughs in development and two reasons for the Nobel prize. Bull. Chem. Soc. Jpn. 2022, 95195-197.

[6] Xu JJ, Cai XY, Cai SMet al. . High-energy lithium-ion batteries: recent progress and a promising future in applications. Energy Environ. Mater.. 2023, 6: 12450.

[7] Shi YS, Yin PP, Li Jet al. . Ultra-high rate capability of in situ anchoring FeF₃ cathode onto double-enhanced conductive Fe/graphitic carbon for high energy density lithium-ion batteries. Nano Energy. 2023, 108. 108181

[8] Bao CS, Zheng CJ, Wu MFet al. . 12µm thick sintered garnet ceramic skeleton enabling high-energy-density solid-state lithium metal batteries. Adv. Energy Mater.. 2023, 132204028.

[9] Hosaka T, Komaba S. Development of nonaqueous electrolytes for high-voltage K-ion batteries. Bull. Chem. Soc. Jpn. 2022, 95569-581.

[10] Wei YK, Tang B, Liang Xet al. . An ultrahigh-mass-loading integrated free-standing functional all-carbon positive electrode prepared using an architecture tailoring strategy for high-energy-density dual-ion batteries. Adv. Mater.. 2023, 35: 2302086.

[11] He W, Guo WB, Wu HLet al. . Challenges and recent advances in high capacity Li-rich cathode materials for high energy density lithium-ion batteries. Adv. Mater.. 2021, 332170395.

[12] Liang GM, Peterson VK, See KWet al. . Developing high-voltage spinel LiNi_0.5Mn_1.5O₄ cathodes for high-energy-density lithium-ion batteries: current achievements and future prospects. J. Mater. Chem. A. 2020, 815373-15398.

[13] Zhao SQ, Guo ZQ, Yan Ket al. . Towards high-energy-density lithium-ion batteries: strategies for developing high-capacity lithium-rich cathode materials. Energy Storage Mater.. 2021, 34: 716-734.

[14] Zhang F, Liao T, Yan Cet al. . Bioinspired designs in active metal-based batteries. Nano Res.. 2024, 17: 587-601.

[15] Jo CH, Voronina N, Sun YKet al. . Gifts from nature: bio-inspired materials for rechargeable secondary batteries. Adv. Mater.. 2021, 33: 2006019.

[16] Mei J, Liao T, Peng Het al. . Bioinspired materials for energy storage. Small Meth.. 2022, 62101076.

[17] Liu YT, Liu S, Li GRet al. . Strategy of enhancing the volumetric energy density for lithium-sulfur batteries. Adv. Mater.. 2021, 332003955.

[18] He SG, Wang SF, Chen HDet al. . A new dual-ion hybrid energy storage system with energy density comparable to that of ternary lithium ion batteries. J. Mater. Chem. A. 2020, 82571-2580.

[19] Zhang X, Ju ZY, Zhu Yet al. . Multiscale understanding and architecture design of high energy/power lithium-ion battery electrodes. Adv. Energy Mater.. 2021, 11: 2000808.

[20] Lee T, An J, Chung WJet al. . Non-electroconductive polymer coating on graphite mitigating electrochemical degradation of PTFE for a dry-processed lithium-ion battery anode. ACS Appl. Mater. Interfaces. 2024, 168930-8938.

[21] Lv ZW, Liu J, Li Cet al. . High-areal-capacity all-solid-state Li-S battery enabled by dry process technology. eTransportation. 2024, 19: 100298.

[22] Kwon K, Kim J, Han Set al. . Low-resistance LiFePO₄ thick film electrode processed with dry electrode technology for high-energy-density lithium-ion batteries. Small Sci.. 2024, 42300302.

[23] Kim HS, Jung JY, Kim Ket al. . Functionalized electrode additive for simultaneously reinforcing chemo-mechanical properties of millimeter-thick dry-electrode for high-energy all-solid-state batteries. Adv. Energy Mater.. 2024, 142303965.

[24] Liang ZM, Li TY, Chi Het al. . Solvent-free manufacturing of lithium-ion battery electrodes via cold plasma. Energy Environ. Mater.. 2024, 712503.

[25] Wei ZQ, Kong DW, Quan LJet al. . Removing electrochemical constraints on polytetrafluoroethylene as dry-process binder for high-loading graphite anodes. Joule. 2024, 81350-1363.

[26] Sim YB, Park BK, Kim KJ. Reasonable design of thick electrodes in lithium-ion batteries. Front. Batter. Electrochem.. 2023, 2: 1272439.

[27] Kwak WJ, RosySharon Det al. . Lithium-oxygen batteries and related systems potential, status, and future. Chem. Rev.. 2020, 1206626-6683.

[28] Yu XW, Manthiram A. Recent advances in lithium-carbon dioxide batteries. Small Struct.. 2020, 1: 2000027.

[29] Dang CC, Mu Q, Xie XBet al. . Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review. Adv. Compos. Hybrid Mater.. 2022, 5606-626.

[30] Liu HX, Zhou X, Ye MXet al. . Ion migration mechanism study of hydroborate/carborate electrolytes for all-solid-state batteries. Electrochem. Energy Rev.. 2023, 6: 31.

[31] Tuo KY, Sun CW, Liu SQ. Recent progress in and perspectives on emerging halide superionic conductors for all-solid-state batteries. Electrochem. Energy Rev.. 2023, 617.

[32] Zhang S, Ma J, Dong SMet al. . Designing all-solid-state batteries by theoretical computation: a review. Electrochem. Energy Rev.. 2023, 64.

[33] Kalnaus S, Dudney NJ, Westover ASet al. . Solid-state batteries: the critical role of mechanics. Science. 2023, 381eabg5998.

[34] Ren DS, Lu LG, Hua Ret al. . Challenges and opportunities of practical sulfide-based all-solid-state batteries. eTransportation. 2023, 18100272.

[35] Liu H, Liang YH, Wang Cet al. . Priority and prospect of sulfide-based solid-electrolyte membrane. Adv. Mater.. 2023, 352206013.

[36] Zhang Q, Cao DX, Ma Yet al. . Solid-state batteries: sulfide-based solid-state electrolytes: synthesis, stability, and potential for all-solid-state batteries. Adv. Mater.. 2019, 311970311.

[37] Lim HD, Yue XJ, Xing Xet al. . Designing solution chemistries for the low-temperature synthesis of sulfide-based solid electrolytes. J. Mater. Chem. A. 2018, 67370-7374.

[38] Jung JY, Han SA, Kim HSet al. . Dry-electrode all-solid-state batteries fortified with a moisture absorbent. ACS Nano. 2023, 17: 15931-15941.

[39] Lau J, DeBlock RH, Butts DMet al. . Sulfide solid electrolytes for lithium battery applications. Adv. Energy Mater.. 2018, 8: 1800933.

[40] Liu YT, Zhang RH, Wang Jet al. . Current and future lithium-ion battery manufacturing. iScience. 2021, 24102332.

[41] Ayerbe E, Berecibar M, Clark Set al. . Digitalization of battery manufacturing: current status, challenges, and opportunities. Adv. Energy Mater.. 2022, 122102696.

[42] Lu Y, Zhao CZ, Yuan Het al. . Dry electrode technology, the rising star in solid-state battery industrialization. Matter. 2022, 5876-898.

[43] Wood DLIIILi JL, An SJ. Formation challenges of lithium-ion battery manufacturing. Joule. 2019, 3: 2884-2888.

[44] Sun CW, Liu J, Gong YDet al. . Recent advances in all-solid-state rechargeable lithium batteries. Nano Energy. 2017, 33: 363-386.

[45] Kuang YD, Chen CJ, Kirsch Det al. . Thick electrode batteries: principles, opportunities, and challenges. Adv. Energy Mater.. 2019, 9: 1901457.

[46] Shi P, Zhang XQ, Shen Xet al. . A review of composite lithium metal anode for practical applications. Adv. Mater. Technol.. 2020, 51900806.

[47] Zhang YS, Courtier NE, Zhang ZYet al. . A review of lithium-ion battery electrode drying: mechanisms and metrology. Adv. Energy Mater.. 2022, 122102233.

[48] Klemens J, Schneider L, Herbst ECet al. . Drying of NCM cathode electrodes with porous, nanostructured particles versus compact solid particles: comparative study of binder migration as a function of drying conditions. Energy Technol.. 2022, 102100985.

[49] Xu M, Reichman B, Wang X. Modeling the effect of electrode thickness on the performance of lithium-ion batteries with experimental validation. Energy. 2019, 186. 115864

[50] Kang H, Kim YM, Park BKet al. . Effective dual-layer fabrication solution for the lateral axial failure of the electrode in lithium-ion batteries. Int. J. Energy Res.. 2022, 4623973-23983.

[51] Cronau M, Paulus A, Pescara LPet al. . What limits the rate capability of ultrathick composite electrodes in lithium-ion batteries? A case study on the thickness-dependent impedance of LiCoO₂ cathodes. Batter. Supercaps. 2022, 5: 2200194.

[52] Kang J, Atwair M, Nam Iet al. . Experimental and numerical investigation on effects of thickness of NCM622 cathode in Li-ion batteries for high energy and power density. Energy. 2023, 263. 125801

[53] Lu CX, Wu WX, Wang LJet al. . Thick electrode for energy storage systems: a facile strategy towards high energy density Li ion batteries. Next Mater.. 2024, 4. 100170

[54] Birkl CR, McTurk E, Zekoll Set al. . Degradation diagnostics for commercial lithium-ion cells tested at −10 °C. J. Electrochem. Soc.. 2017, 164A2644-A2653.

[55] Ma S, Jiang M, Tao Pet al. . Temperature effect and thermal impact in lithium-ion batteries: a review. Prog. Nat. Sci.. 2018, 28: 653.

[56] Rana M, Ahad SA, Li Met al. . Review on areal capacities and long-term cycling performances of lithium sulfur battery at high sulfur loading. Energy Storage Mater.. 2019, 18289-310.

[57] Gallagher KG, Trask SE, Bauer Cet al. . Optimizing areal capacities through understanding the limitations of lithium-ion electrodes. J. Electrochem. Soc.. 2015, 163: A138-A149.

[58] Pender JP, Jha G, Youn DHet al. . Electrode degradation in lithium-ion batteries. ACS Nano. 2020, 14: 1243-1295.

[59] Arnot DJ, Mayilvahanan KS, Hui ZYet al. . Thick electrode design for facile electron and ion transport: architectures, advanced characterization, and modeling. Acc. Mater. Res.. 2022, 3: 472-483.

[60] Zhang YF, Li FZ, Yang Ket al. . Polymer molecular engineering enables rapid electron/ion transport in ultra-thick electrode for high-energy-density flexible lithium-ion battery. Adv. Funct. Mater.. 2021, 31: 2100434.

[61] Nie ZY, Parai R, Cai Cet al. . Pore microstructure impacts on lithium ion transport and rate capability of thick sintered electrodes. J. Electrochem. Soc.. 2021, 168. 060550

[62] Xu JK, Lei JF, Ming NNet al. . Rational design of wood-structured thick electrode for electrochemical energy storage. Adv. Funct. Mater.. 2022, 322204426.

[63] Li J, Gao Y, Liang XHet al. . Ultra-thin coating and three-dimensional electrode structures to boosted thick electrode lithium-ion battery performance. Batter. Supercaps. 2019, 2139-143.

[64] Zhang X, Hui ZY, King Set al. . Tunable porous electrode architectures for enhanced Li-ion storage kinetics in thick electrodes. Nano Lett.. 2021, 21: 5896-5904.

[65] Sander JS, Erb RM, Li Let al. . High-performance battery electrodes via magnetic templating. Nat. Energy. 2016, 1: 16099.

[66] Lu LL, Lu YY, Xiao ZJet al. . Wood-inspired high-performance ultrathick bulk battery electrodes. Adv. Mater.. 2018, 301706745.

[67] Shen F, Luo W, Dai JQet al. . Ultra-thick, low-tortuosity, and mesoporous wood carbon anode for high-performance sodium-ion batteries. Adv. Energy Mater.. 2016, 61600377.

[68] Elango R, Demortière A, de Andrade Vet al. . Thick binder-free electrodes for Li-ion battery fabricated using templating approach and spark plasma sintering reveals high areal capacity. Adv. Energy Mater.. 2018, 81703031.

[69] Park SH, King PJ, Tian RYet al. . High areal capacity battery electrodes enabled by segregated nanotube networks. Nat. Energy. 2019, 4560-567.

[70] Yuan C, Deng YL, Li THet al. . Manufacturing energy analysis of lithium ion battery pack for electric vehicles. CIRP Ann-Manuf. Technol.. 2017, 66: 53-56.

[71] Wu Q, Zheng JP, Hendrickson Met al. . Dry process for fabricating low cost and high performance electrode for energy storage devices. MRS Adv.. 2019, 4: 857-863.

[72] Tao RM, Steinhoff B, Sun XGet al. . High-throughput and high-performance lithium-ion batteries via dry processing. Chem. Eng. J.. 2023, 471. 144300

[73] Bouguern MD, Madikere Raghunatha Reddy AK, Li Xet al. . Engineering dry electrode manufacturing for sustainable lithium-ion batteries. Batteries. 2024, 10: 39.

[74] Wang YB, Yang Q, Guo Xet al. . Strategies of binder design for high-performance lithium-ion batteries: a mini review. Rare Met.. 2022, 41745-761.

[75] Markevich E, Salitra G, Aurbach D. Influence of the PVDF binder on the stability of LiCoO₂ electrodes. Electrochem. Commun.. 2005, 7: 1298-1304.

[76] Sun J, Yao L, Zhao QLet al. . Modification on crystallization of poly(vinylidene fluoride) (PVDF) by solvent extraction of poly(methyl methacrylate) (PMMA) in PVDF/PMMA blends. Front. Mater. Sci.. 2011, 5: 388-400.

[77] Wang N, NuLi YN, Su SJet al. . Effects of binders on the electrochemical performance of rechargeable magnesium batteries. J. Power. Sources. 2017, 341: 219-229.

[78] Ozpinar P, Dogan C, Demiral Het al. . Effect of binder on the electrochemical performance of activated carbon electrodes obtained from waste hazelnut shells: comparison of PTFE and PVDF. Diam. Relat. Mater.. 2023, 137. 110092

[79] Ghahramani M, Hamidi S, Mohammad Met al. . The effect of sulfonated copolymer as a binder on the electrochemical performance of LiFePO₄ cathode for lithium-ion batteries. J. Electroanal. Chem.. 2023, 936. 117342

[80] Wen LZ, Guan ZW, Liu XMet al. . Effect of binder on internal resistance and performance of lithium iron phosphate batteries. J. Electrochem. Soc.. 2023, 170. 050527

[81] Pillai AM, Salini PS, John Bet al. . Aqueous binders for cathodes: a lodestar for greener lithium ion cells. Energy Fuels. 2022, 36: 5063-5087.

[82] Kovalenko I, Zdyrko B, Magasinski Aet al. . A major constituent of brown algae for use in high-capacity Li-ion batteries. Science. 2011, 334: 75-79.

[83] Krishnaiah YSR, Satyanarayana V, Dinesh Kumar Bet al. . In vitro drug release studies on guar gum-based colon targeted oral drug delivery systems of 5-fluorouracil. Eur. J. Pharm. Sci.. 2002, 16: 185-192.

[84] Bie YT, Yang J, Nuli YNet al. . Oxidized starch as a superior binder for silicon anodes in lithium-ion batteries. RSC Adv.. 2016, 6: 97084-97088.

[85] Bridel JS, Azaïs T, Morcrette Met al. . In situ observation and long-term reactivity of Si/C/CMC composites electrodes for Li-ion batteries. J. Electrochem. Soc.. 2011, 158: A750-A759.

[86] Courtel FM, Niketic S, Duguay Det al. . Water-soluble binders for MCMB carbon anodes for lithium-ion batteries. J. Power Sources. 2011, 196: 2128-2134.

[87] Tigari G, Manjunatha JG. Electrochemical preparation of poly(arginine)-modified carbon nanotube paste electrode and its application for the determination of pyridoxine in the presence of riboflavin: an electroanalytical approach. J. Anal. Test.. 2019, 3: 331-340.

[88] Lee JH, Kim J, Jeong MHet al. . Visualization of styrene-butadiene rubber (SBR) latex and large-scale analysis of the microstructure of lithium-ion battery (LIB) anodes. J. Power. Sources. 2023, 557. 232552

[89] Chatterjee D, Das D, Sahoo Set al. . Electrochemical performance of melt impregnated lithium sulphur rechargeable cell: effect of crosslinked water soluble polyacrylic acid binder. Mater. Chem. Phys.. 2024, 312. 128583

[90] Sun F, Wheeler DR. The effects of lithium ions and pH on the function of polyacrylic acid binder for silicon anodes. J. Electrochem. Soc.. 2023, 170. 080502

[91] Dou WD, Zheng MT, Zhang Wet al. . Review on the binders for sustainable high-energy-density lithium ion batteries: status, solutions, and prospects. Adv. Funct. Mater.. 2023, 33: 2305161.

[92] Ludwig B, Zheng ZF, Shou Wet al. . Solvent-free manufacturing of electrodes for lithium-ion batteries. Sci. Rep.. 2016, 623150.

[93] Schälicke G, Landwehr I, Dinter Aet al. . Solvent-free manufacturing of electrodes for lithium-ion batteries via electrostatic coating. Energy Technol.. 2020, 81900309.

[94] Tao RM, Steinhoff B, Sawicki CHet al. . Unraveling the impact of the degree of dry mixing on dry-processed lithium-ion battery electrodes. J. Power Sources. 2023, 580. 233379

[95] Zhang Y, Lu S, Lou FLet al. . Solvent-free lithium iron phosphate cathode fabrication with fibrillation of polytetrafluoroethylene. Electrochim. Acta. 2023, 456. 142469

[96] Ouyang LX, Wu ZH, Wang Jet al. . The effect of solid content on the rheological properties and microstructures of a Li-ion battery cathode slurry. RSC Adv.. 2020, 1019360-19370.

[97] Ligneel E, Lestriez B, Hudhomme Aet al. . Effects of the solvent concentration (solid loading) on the processing and properties of the composite electrode. J. Electrochem. Soc.. 2007, 154: A235.

[98] Morelly SL, Saraka RM, Alvarez NJet al. . Impact of mixing shear on polymer binder molecular weight and battery electrode reproducibility. Batteries. 2024, 1046.

[99] Hu B, Shkrob IA, Zhang Set al. . The existence of optimal molecular weight for poly(acrylic acid) binders in silicon/graphite composite anode for lithium-ion batteries. J. Power. Sources. 2018, 378671-676.

[100] Park HK, Kong BS, Oh ES. Effect of high adhesive polyvinyl alcohol binder on the anodes of lithium ion batteries. Electrochem. Commun.. 2011, 13: 1051-1053.

[101] Ryu M, Hong YK, Lee SYet al. . Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication. Nat. Commun.. 2023, 14: 1316.

[102] Lee SE, Sim HT, Lee YJet al. . Li₆PS₅Cl-based composite electrolyte reinforced with high-strength polyester fibers for all-solid-state lithium batteries. J. Power Sources. 2022, 542. 231777

[103] Hong SB, Lee YJ, Kim UHet al. . All-solid-state lithium batteries: Li⁺-conducting ionomer binder for dry-processed composite cathodes. ACS Energy Lett.. 2022, 71092-1100.

[104] Hippauf F, Schumm B, Doerfler Set al. . Overcoming binder limitations of sheet-type solid-state cathodes using a solvent-free dry-film approach. Energy Storage Mater.. 2019, 21: 390-398.

[105] Wang C, Yu R, Duan Het al. . Solvent-free approach for interweaving freestanding and ultrathin inorganic solid electrolyte membranes. ACS Energy Lett.. 2022, 7: 410-416.

[106] Zhang ZH, Wu LP, Zhou Det al. . Flexible sulfide electrolyte thin membrane with ultrahigh ionic conductivity for all-solid-state lithium batteries. Nano Lett.. 2021, 21: 5233-5239.

[107] Kim H, Lim JH, Lee Tet al. . Ozone-treated carbon nanotube as a conductive agent for dry-processed lithium-ion battery cathode. ACS Energy Lett.. 2023, 8: 3460-3466.

[108] Tao RM, Tan SS, Meyer HMet al. . Insights into the chemistry of the cathodic electrolyte interphase for PTFE-based dry-processed cathodes. ACS Appl. Mater. Interfaces. 2023, 15: 40488-40495.

[109] Yao WL, Chouchane M, Li WKet al. . A 5 V-class cobalt-free battery cathode with high loading enabled by dry coating. Energy Environ. Sci.. 2023, 16: 1620-1630.

[110] Ni MH, Zhao Y, Xu Net al. . Improving the cycling stability of lithium-ion batteries with a dry-processed cathode via the synergistic effect of carboxymethyl cellulose and siloxane. Sci. China Mater.. 2024, 67: 76-84.

[111] Shin D, Nam JS, Linh Nguyen CTet al. . Design of densified nickel-rich layered composite cathode via the dry-film process for sulfide-based solid-state batteries. J. Mater. Chem. A. 2022, 10: 23222-23231.

[112] Park J, Kim Y, Kim Yet al. . Scalable conversion of residual lithium into conformal artificial cathode electrolyte interphase via a single-step wet-chemical process for high-voltage Ni-rich cathode operation. Chem. Eng. J.. 2023, 467. 143335

[113] Zhou AJ, Liu Q, Wang Yet al. . Al₂O₃ surface coating on LiCoO₂ through a facile and scalable wet-chemical method towards high-energy cathode materials withstanding high cutoff voltages. J. Mater. Chem. A. 2017, 5: 24361-24370.

[114] Zha WP, Xu YH, Chen Fet al. . Cathode/electrolyte interface engineering via wet coating and hot pressing for all-solid-state lithium battery. Solid State Ion.. 2019, 330: 54-59.

[115] Chae BJ, Yim T. Sulfonate-immobilized artificial cathode electrolyte interphases layer on Ni-rich cathode. J. Power. Sources. 2017, 360: 480-487.

[116] Kozawa T, Fukuyama K, Kondo Aet al. . Wet milling synthesis of NH₄CoPO₄·H₂O platelets: formation reaction, growth mechanism, and conversion into high-voltage LiCoPO₄ cathode for Li-ion batteries. Mater. Res. Bull.. 2021, 135. 111149

[117] Liu H, Liu YY, An LWet al. . High energy density LiFePO₄/C cathode material synthesized by wet ball milling combined with spray drying method. J. Electrochem. Soc.. 2017, 164: A3666-A3672.

[118] Liu C, Wu MM, Liu Yet al. . Effect of ball milling conditions on microstructure and lithium storage properties of LiNi_0.5Mn_1.5O₄ as cathode for lithium-ion batteries. Mater. Res. Bull.. 2018, 99: 436-443.

[119] Pan TJ, Alvarado J, Zhu Jet al. . Structural degradation of layered cathode materials in lithium-ion batteries induced by ball milling. J. Electrochem. Soc.. 2019, 166: A1964-A1971.

[120] Wood DLIIILi JL, Daniel C. Prospects for reducing the processing cost of lithium ion batteries. J. Power Sources. 2015, 275: 234-242.

[121] Duffner F, Wentker M, Greenwood Met al. . Battery cost modeling: a review and directions for future research. Renew. Sustain. Energy Rev.. 2020, 127. 109872

[122] Asif A, Singh R. Further cost reduction of battery manufacturing. Batteries. 2017, 3: 17.

[123] Wood DL, Quass JD, Li JLet al. . Technical and economic analysis of solvent-based lithium-ion electrode drying with water and NMP. Dry. Technol.. 2018, 36234-244.

[124] Li JL, Lu YQ, Yang TRet al. . Water-based electrode manufacturing and direct recycling of lithium-ion battery electrodes: a green and sustainable manufacturing system. iScience. 2020, 23: 101081.

[125] Ahmed S, Nelson PA, Gallagher KGet al. . Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing. J. Power. Sources. 2016, 322169-178.

[126] Erakca M, Baumann M, Bauer Wet al. . Energy flow analysis of laboratory scale lithium-ion battery cell production. iScience. 2021, 24: 102437.

[127] Zackrisson M, Avellán L, Orlenius J. Life cycle assessment of lithium-ion batteries for plug-in hybrid electric vehicles: critical issues. J. Clean. Prod.. 2010, 181519-1529.

[128] Froboese L, van der Sichel JF, Loellhoeffel Tet al. . Effect of microstructure on the ionic conductivity of an all solid-state battery electrode. J. Electrochem. Soc.. 2019, 166: A318-A328.

[129] Al-Shroofy M, Zhang QL, Xu JGet al. . Solvent-free dry powder coating process for low-cost manufacturing of LiNi_1/3Mn_1/3Co_1/3O₂ cathodes in lithium-ion batteries. J. Power Sources. 2017, 352: 187-193.

[130] Rollag K, Juarez-Robles D, Du ZJet al. . Drying temperature and capillarity-driven crack formation in aqueous processing of Li-ion battery electrodes. ACS Appl. Energ. Mater.. 2019, 2: 4464-4476.

[131] Lee J, Jin D, Kim JYet al. . Dry pre-lithiation for graphite-silicon diffusion-dependent electrode for all-solid-state battery. Adv. Energy Mater.. 2023, 13: 2300172.

[132] Holtstiege F, Bärmann P, Nölle Ret al. . Pre-lithiation strategies for rechargeable energy storage technologies: concepts, promises and challenges. Batteries. 2018, 44.

[133] Sun CK, Zhang X, Li Cet al. . Recent advances in prelithiation materials and approaches for lithium-ion batteries and capacitors. Energy Storage Mater.. 2020, 32497-516.

[134] Brown EN, Dattelbaum DM. The role of crystalline phase on fracture and microstructure evolution of polytetrafluoroethylene (PTFE). Polymer. 2005, 46: 3056-3068.

[135] Luo C, Pei JK, Zhuo WYet al. . Phase transition behavior and deformation mechanism of polytetrafluoroethylene under stretching. RSC Adv.. 2021, 11: 39813-39820.

[136] Jiang C, Han S, Chen SHet al. . The role of PTFE in situ fibrillation on PET microcellular foaming. Polymer. 2021, 212. 123171

[137] Huang A, Peng XF, Turng LS. In situ fibrillated polytetrafluoroethylene (PTFE) in thermoplastic polyurethane (TPU) via melt blending: effect on rheological behavior, mechanical properties, and microcellular foamability. Polymer. 2018, 134: 263-274.

[138] Froboese L, Groffmann L, Monsees Fet al. . Enhancing the lithium ion conductivity of an all solid-state electrolyte via dry and solvent-free scalable series production processes. J. Electrochem. Soc.. 2020, 167. 020558

[139] Jin W, Song G, Yoo JKet al. . Advancements in dry electrode technologies: towards sustainable and efficient battery manufacturing. ChemElectroChem. 2024, 11. e202400288

[140] Mo JS, Zhang DM, Sun MZet al. . Polyethylene oxide as a multifunctional binder for high-performance ternary layered cathodes. Polymers. 2021, 13: 3992.

[141] Xiao FL, Wang BF, Gao Xet al. . High performance carboxymethyl cellulose-polyethylene oxide polymer binder for black phosphorus anode in lithium-ion batteries. Electrochem. Commun.. 2024, 161. 107699

[142] de la Torre-Gamarra C, Sotomayor ME, Sanchez JYet al. . High mass loading additive-free LiFePO₄ cathodes with 500μm thickness for high areal capacity Li-ion batteries. J. Power. Sources. 2020, 458. 228033

[143] Amran M, Lesovik V, Tolstoy Aet al. . Properties and performance of polypropylene fibered high-strength concrete with an improved composite binders. Case Stud. Constr. Mater.. 2022, 17. e01621

[144] Maurel A, Grugeon S, Fleutot Bet al. . Three-dimensional printing of a LiFePO₄/graphite battery cell via fused deposition modeling. Sci. Rep.. 2019, 918031.

[145] Bragaglia M, Mariani M, Sergi Cet al. . Polylactic acid as biobased binder for the production of 3D printing filaments for Ti₆Al₄V alloy manufacturing via bound metal deposition. J. Mater. Res. Technol.. 2023, 27168-181.

[146] Baskaran M, Hashim R, Sulaiman Oet al. . Properties of particleboard manufactured from oil palm trunk waste using polylactic acid as a natural binder. Waste Biomass Valor.. 2019, 10: 179-186.

[147] Jiang TL, He PG, Wang GXet al. . Lithium batteries: solvent-free synthesis of thin, flexible, nonflammable garnet-based composite solid electrolyte for all-solid-state lithium batteries. Adv. Energy Mater.. 2020, 10: 2070052.

[148] Jiang TL, He PG, Liang YHet al. . All-dry synthesis of self-supporting thin Li₁₀GeP₂S₁₂ membrane and interface engineering for solid state lithium metal batteries. Chem. Eng. J.. 2021, 421. 129965

[149] Park DW, Cañas NA, Wagner Net al. . Novel solvent-free direct coating process for battery electrodes and their electrochemical performance. J. Power Sources. 2016, 306758-763.

[150] Liu J, Ludwig B, Liu YTet al. . Strengthening the electrodes for Li-ion batteries with a porous adhesive interlayer through dry-spraying manufacturing. ACS Appl. Mater. Interfaces. 2019, 11: 25081-25089.

[151] Ludwig B, Liu J, Chen IMet al. . Understanding interfacial-energy-driven dry powder mixing for solvent-free additive manufacturing of Li-ion battery electrodes. Adv. Mater. Interfaces. 2017, 4: 1700570.

[152] Liu J, Ludwig B, Liu YTet al. . Lithium-ion batteries: Scalable dry printing manufacturing to enable long-life and high energy lithium-ion batteries. Adv. Mater. Technol.. 2017, 21700106.

[153] Verdier N, Foran G, Lepage Det al. . Challenges in solvent-free methods for manufacturing electrodes and electrolytes for lithium-based batteries. Polymers. 2021, 13323.

[154] Jardiel T, Sotomayor ME, Levenfeld Bet al. . Optimization of the processing of 8-YSZ powder by powder injection molding for SOFC electrolytes. Int. J. Appl. Ceram. Technol.. 2008, 5574-581.

[155] Astafyeva K, Dousset C, Bureau Yet al. . High energy Li-ion electrodes prepared via a solventless melt process. Batter. Supercaps. 2020, 3: 341-343.

[156] Sotomayor ME, de la Torre-Gamarra C, Levenfeld Bet al. . Ultra-thick battery electrodes for high gravimetric and volumetric energy density Li-ion batteries. J. Power Sources. 2019, 437. 226923

[157] Too MH, Leong KF, Chua CKet al. . Investigation of 3D non-random porous structures by fused deposition modelling. Int. J. Adv. Manuf. Technol.. 2002, 19: 217-223.

[158] Maurel A, Armand M, Grugeon Set al. . Poly(ethylene oxide)-LiTFSI solid polymer electrolyte filaments for fused deposition modeling three-dimensional printing. J. Electrochem. Soc.. 2020, 167. 070536

[159] McOwen DW, Xu SM, Gong YHet al. . 3D-printing electrolytes for solid-state batteries. Adv. Mater.. 2018, 30: 1707132.

[160] Li YX, Wu YJ, Wang ZXet al. . Progress in solvent-free dry-film technology for batteries and supercapacitors. Mater. Today. 2022, 5592-109.

[161] Zhang Y, Lu S, Wang ZSet al. . Recent technology development in solvent-free electrode fabrication for lithium-ion batteries. Renew. Sust. Energ. Rev.. 2023, 183. 113515

[162] Yang GN, Abraham C, Ma YXet al. . Advances in materials design for all-solid-state batteries: from bulk to thin films. Appl. Sci.. 2020, 10: 4727.

[163] Oruganti SK, Khosla A. 3D printing and wireless power transfer systems for soft robotics applications. ECS Trans.. 2020, 9855-58.

[164] Trembacki B, Duoss E, Oxberry Get al. . Mesoscale electrochemical performance simulation of 3D interpenetrating lithium-ion battery electrodes. J. Electrochem. Soc.. 2019, 166: A923-A934.

[165] Ragones H, Menkin S, Kamir Yet al. . Towards smart free form-factor 3D printable batteries. Sustain. Energ. Fuels. 2018, 2: 1542-1549.

[166] Reyes C, Somogyi R, Niu SBet al. . Three-dimensional printing of a complete lithium ion battery with fused filament fabrication. ACS Appl. Energ. Mater.. 2018.

[167] Wang YB, Chen CJ, Xie Het al. . 3D-printed all-fiber Li-ion battery toward wearable energy storage. Adv. Funct. Mater.. 2017, 27: 1703140.

[168] Lin J, Lin L, Qu SSet al. . Promising electrode and electrolyte materials for high-energy-density thin-film lithium batteries. Energy Environ. Mater.. 2022, 5133-156.

[169] Seeba J, Reuber S, Heubner Cet al. . Extrusion-based fabrication of electrodes for high-energy Li-ion batteries. Chem. Eng. J.. 2020, 402. 125551

[170] Subramanyam G, Cole MW, Sun NXet al. . Challenges and opportunities for multi-functional oxide thin films for voltage tunable radio frequency/microwave components. J. Appl. Phys.. 2013, 114. 191301

[171] Maurel A, Courty M, Fleutot Bet al. . Highly loaded graphite–polylactic acid composite-based filaments for lithium-ion battery three-dimensional printing. Chem. Mater.. 2018, 30: 7484-7493.

[172] Zhou HT, Liu MH, Gao HQet al. . Dense integration of solvent-free electrodes for Li-ion supercabattery with boosted low temperature performance. J. Power Sources. 2020, 473. 228553

[173] Kirsch DJ, Lacey SD, Kuang YDet al. . Scalable dry processing of binder-free lithium-ion battery electrodes enabled by holey graphene. ACS Appl. Energ. Mater.. 2019, 2: 2990-2997.

[174] Yubuchi S, Nakamura W, Bibienne Tet al. . All-solid-state cells with Li₄Ti₅O₁₂/carbon nanotube composite electrodes prepared by infiltration with argyrodite sulfide-based solid electrolytes via liquid-phase processing. J. Power Sources. 2019, 417: 125-131.

[175] Auvergniot J, Cassel A, Ledeuil JBet al. . Interface stability of argyrodite Li₆PS₅Cl toward LiCoO₂, LiNi_1/3Co_1/3Mn_1/3O₂, and LiMn₂O₄ in bulk all-solid-state batteries. Chem. Mater.. 2017, 29: 3883-3890.

[176] Gyulai A, Bauer W, Ehrenberg H. Dry electrode manufacturing in a calender: the role of powder premixing for electrode quality and electrochemical performance. ACS Appl. Energ. Mater.. 2023, 6: 5122-5134.

[177] Shulga YM, Melezhik AV, Kabachkov ENet al. . Characterisation and electrical conductivity of polytetrafluoroethylene/graphite nanoplatelets composite films. Appl. Phys. A-Mater. Sci. Process.. 2019, 125: 460.

[178] Gill FS, Uniyal D, Prasad Bet al. . Investigation of increased electrical conductivity by rGO in rGO/PVDF/PMMA/PTFE nanocomposites. J. Mol. Struct.. 2022, 1267. 133541

[179] Lei XL, Zhang HY, Chen YMet al. . A three-dimensional LiFePO₄/carbon nanotubes/graphene composite as a cathode material for lithium-ion batteries with superior high-rate performance. J. Alloy. Compd.. 2015, 626280-286.

[180] He JR, Chen YF, Lv WQet al. . Three-dimensional hierarchical graphene-CNT@Se: a highly efficient freestanding cathode for Li–Se batteries. ACS Energy Lett.. 2016, 1: 16-20.

[181] He JR, Chen YF, Lv WQet al. . Three-dimensional CNT/graphene-Li₂S aerogel as freestanding cathode for high-performance Li-S batteries. ACS Energy Lett.. 2016, 1: 820-826.

[182] Azam MA, Seman RNAR, Mohamed MAet al. . Effect of polytetrafluoroethylene binder content on gravimetric capacitance and life cycle stability of graphene supercapacitor. Int. J. Automot. Mech. Eng.. 2022, 19: 9964-9970.

[183] Zhang Z, Kong LL, Liu Set al. . A high-efficiency sulfur/carbon composite based on 3D graphene nanosheet@carbon nanotube matrix as cathode for lithium–sulfur battery. Adv. Energy Mater.. 2017, 7: 1602543.

[184] Shu CZ, Li B, Zhang BSet al. . Hierarchical nitrogen-doped graphene/carbon nanotube composite cathode for lithium-oxygen batteries. Chemsuschem. 2015, 83973-3976.

[185] Yang R, Gong SM, Zhao SQet al. . S@CNT-graphene-TiN multi-dimensional composites with high sulfur content as the high-performance lithium-sulfur battery cathode materials. J. Solid State Electrochem.. 2020, 24: 1397-1404.

[186] Ding D, Maeyoshi Y, Kubota Met al. . Holey reduced graphene oxide/carbon nanotube/LiMn_0.7Fe_0.3PO₄ composite cathode for high-performance lithium batteries. J. Power Sources. 2020, 449: 227553.

[187] Sotowa C, Origi G, Takeuchi Met al. . The reinforcing effect of combined carbon nanotubes and acetylene blacks on the positive electrode of lithium-ion batteries. Chemsuschem. 2008, 1911-915.

[188] Wang GP, Li H, Zhang QTet al. . The study of carbon nanotubes as conductive additives of cathode in lithium ion batteries. J. Solid State Electrochem.. 2011, 15: 759-764.

[189] Kubarkov AV, Asharchuk AA, Drozhzhin OAet al. . Effect of polymer binders with single-walled carbon nanotubes on the electrochemical and physicochemical properties of the LiFePO₄ cathode. ACS Appl. Energ. Mater.. 2021, 4: 12310-12318.

[190] Zhang SM, Zhang Q, Huang JQet al. . Composite cathodes containing SWCNT@S coaxial nanocables: facile synthesis, surface modification, and enhanced performance for Li-ion storage. Part. Part. Syst. Charact.. 2013, 30: 158-165.

[191] Babkin AV, Kubarkov AV, Drozhzhin OAet al. . Single-, double-, and multi-walled carbon nanotubes as electrically conductive additives to lithium-ion battery cathodes. Dokl. Chem.. 2023, 508: 10216.

[192] Liu YJ, Li BJ, Kitaura Het al. . Fabrication and performance of all-solid-state Li-air battery with SWCNTs/LAGP cathode. ACS Appl. Mater. Interfaces. 2015, 717307-17310.

[193] Fan XM, Zhang XH, Hu GRet al. . Single-walled carbon nanotube as conductive additive for SiO/C composite electrodes in pouch-type lithium-ion batteries. Ionics. 2020, 26: 1721-1728.

[194] Gueon D, Hwang JT, Yang SBet al. . Spherical macroporous carbon nanotube particles with ultrahigh sulfur loading for lithium–sulfur battery cathodes. ACS Nano. 2018, 12: 226-233.

[195] Yoon H, Kim H, Matteini Pet al. . Research trends on the dispersibility of carbon nanotube suspension with surfactants in their application as electrodes of batteries: a mini-review. Batteries. 2022, 8: 254.

[196] Choi J, Lee C, Park Set al. . Analysis of electrochemical performance with dispersion degree of CNTs in electrode according to ultrasonication process and slurry viscosity for lithium-ion battery. Nanomaterials. 2022, 124271.

[197] Hoon Kim J, Ahn J, Kim HMet al. . Highly efficient oxidation of single-walled carbon nanotubes in liquid crystalline phase and dispersion for applications in Li-ion batteries. Chem. Eng. J.. 2023, 458. 141350

[198] Zhang MX, Ning GQ, Xiao ZH. Binder-assisted dispersion of agglomerated carbon nanotubes for efficiently establishing conductive networks in cathodes of Li-ion batteries. Energy Technol.. 2020, 82000589.

[199] Choi JH, Lee C, Park Set al. . Improved electrochemical performance using well-dispersed carbon nanotubes as conductive additive in the Ni-rich positive electrode of lithium-ion batteries. Electrochem. Commun.. 2023, 146. 107419

[200] Tu XF, Zhou YK, Tian XHet al. . Monodisperse LiFePO₄ microspheres embedded with well-dispersed nitrogen-doped carbon nanotubes as high-performance positive electrode material for lithium-ion batteries. Electrochim. Acta. 2016, 22264-73.

[201] Woo MH, Didwal PN, Kim HJet al. . Reinforcing effect of single-wall carbon nanotubes on the LiNi_0.6Co_0.2Mn_0.2O₂ composite cathode for high-energy-density all-solid-state Li-ion batteries. Appl. Surf. Sci.. 2021, 568: 150934.

[202] Kim DW, Zettsu N, Teshima K. Three-dimensional SWCNT and MWCNT hybrid networks for extremely high-loading and high rate cathode materials. J. Mater. Chem. A. 2019, 717412-17419.

[203] Park CW, Lee JH, Seo JKet al. . Graphene collage on Ni-rich layered oxide cathodes for advanced lithium-ion batteries. Nat. Commun.. 2021, 12: 2145.

[204] Son IH, Park JH, Park Set al. . Graphene balls for lithium rechargeable batteries with fast charging and high volumetric energy densities. Nat. Commun.. 2017, 81561.

[205] Shin J, Lee JH, Seo JKet al. . Carbon nanotubes-coated Ni-rich cathodes for the green manufacturing process of lithium-ion batteries. Int. J. Energy Res.. 2022, 4616061-16074.

[206] Nirmale TC, Kale BB, Varma AJ. A review on cellulose and lignin based binders and electrodes: small steps towards a sustainable lithium ion battery. Int. J. Biol. Macromol.. 2017, 103: 1032-1043.

[207] Teng XX, Fang WX, Liang YZet al. . High-performance polyamide nanofiltration membrane with arch-bridge structure on a highly hydrated cellulose nanofiber support. Sci. China Mater.. 2020, 63: 2570-2581.

[208] Liang Y, Wei Z, Wang HGet al. . Flexible freestanding conductive nanopaper based on PPy:PSS nanocellulose composite for supercapacitors with high performance. Sci. China Mater.. 2023, 66: 964-973.

[209] Lux SF, Schappacher F, Balducci Aet al. . Low cost, environmentally benign binders for lithium-ion batteries. J. Electrochem. Soc.. 2010, 157: A320.

[210] Buqa H, Holzapfel M, Krumeich Fet al. . Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries. J. Power Sources. 2006, 161617-622.

[211] Ma CZ, Wen YH, Qiao Qet al. . Improving electrochemical performance of high-voltage spinel LiNi_0.5Mn_1.5O₄ cathodes by silicon oxide surface modification. ACS Appl. Energ. Mater.. 2021, 4: 12201-12210.

[212] Meng JW, Chu FL, Hu JLet al. . Liquid polydimethylsiloxane grafting to enable dendrite-free Li plating for highly reversible Li-metal batteries. Adv. Funct. Mater.. 2019, 29: 1902220.

[213] Oh I, Cho J, Kim Ket al. . Poly(imide-co-siloxane) as a thermo-stable binder for a thin layer cathode of thermal batteries. Energies. 2018, 113154.

[214] Wang HL, Zhang XG, Li Yet al. . Siloxane-based organosilicon materials in electrochemical energy storage devices. Angew. Chem. Int. Ed.. 2022, 612210851.

[215] Kim HJ, Kim JS, Song SW. Uniform distribution of siloxane-grafted SiO nanoparticles in micron hard-carbon matrix for high-rate composite anode in Li-ion batteries. J. Solid State Chem.. 2019, 270479-486.

[216] Teng PC, Wang Z, Kang Yet al. . Metal-ion-tunable adhesive elastomers for mounting the multilayer elastic circuit. Sci. China Mater.. 2023, 66: 4054-4061.

[217] Kim SW, Kim T, Kim YSet al. . Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers. Carbon. 2012, 50: 3-33.

[218] Ahn J, Im HG, Lee Yet al. . A novel organosilicon-type binder for LiCoO₂ cathode in Li-ion batteries. Energy Storage Mater.. 2022, 49: 58-66.

[219] Lee D, Manthiram A. Boosting the electrochemical performance with functionalized dry electrodes for practical all-solid-state batteries. J. Mater. Chem. A. 2024, 12: 3323-3330.

[220] Xie M, Li B, Zhou Y. Free-standing high-voltage LiCoO₂/multi-wall carbon nanotube paper electrodes with extremely high areal mass loading for lithium ion batteries. J. Mater. Chem. A. 2015, 3: 23180-23184.

[221] Jaiser S, Kumberg J, Klaver Jet al. . Microstructure formation of lithium-ion battery electrodes during drying: an ex-situ study using cryogenic broad ion beam slope-cutting and scanning electron microscopy (Cryo-BIB-SEM). J. Power Sources. 2017, 345: 97-107.

[222] Li CC, Wang YW. Binder distributions in water-based and organic-based LiCoO₂ electrode sheets and their effects on cell performance. J. Electrochem. Soc.. 2011, 158: A1361.

[223] Lombardo T, Ngandjong AC, Belhcen Aet al. . Carbon-binder migration: a three-dimensional drying model for lithium-ion battery electrodes. Energy Storage Mater.. 2021, 43337-347.

[224] Hu JK, Yuan H, Yang SJet al. . Dry electrode technology for scalable and flexible high-energy sulfur cathodes in all-solid-state lithium-sulfur batteries. J. Energy Chem.. 2022, 71: 612-618.

[225] Ju ZY, Zhu Y, Zhang Xet al. . Understanding thickness-dependent transport kinetics in nanosheet-based battery electrodes. Chem. Mater.. 2020, 32: 1684-1692.

[226] Bauer W, Nötzel D, Wenzel Vet al. . Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries. J. Power Sources. 2015, 288: 359-367.

[227] Shen XY, Yu HL, Ben LBet al. . High energy density in ultra-thick and flexible electrodes enabled by designed conductive agent/binder composite. J. Energy Chem.. 2024, 90: 133-143.

[228] Kempczinski RF. Physical characteristics of implanted polytetrafluoroethylene grafts. Arch. Surg.. 1979, 114: 917.

[229] Kremer LS, Hoffmann A, Danner Tet al. . Manufacturing process for improved ultra-thick cathodes in high-energy lithium-ion batteries. Energy Technol.. 2020, 81900167.

[230] Kraytsberg A, Ein-Eli Y. Conveying advanced Li-ion battery materials into practice the impact of electrode slurry preparation skills. Adv. Energy Mater.. 2016, 61600655.

[231] Cerbelaud M, Lestriez B, Ferrando Ret al. . Numerical and experimental study of suspensions containing carbon blacks used as conductive additives in composite electrodes for lithium batteries. Langmuir. 2014, 302660-2669.

[232] Jaiser S, Müller M, Baunach Met al. . Investigation of film solidification and binder migration during drying of Li-ion battery anodes. J. Power Sources. 2016, 318: 210-219.

[233] Müller M, Pfaffmann L, Jaiser Set al. . Investigation of binder distribution in graphite anodes for lithium-ion batteries. J. Power Sources. 2017, 340: 1-5.

[234] Gu HC, Zhu YE, Yang JQet al. . Nanomaterials and technologies for lithium-ion hybrid supercapacitors. ChemNanoMat. 2016, 2: 578-587.

[235] Zuo WH, Li RZ, Zhou Cet al. . Battery-supercapacitor hybrid devices: recent progress and future prospects. Adv. Sci.. 2017, 4: 1600539.

[236] Cao WJ, Shih J, Zheng JPet al. . Development and characterization of Li-ion capacitor pouch cells. J. Power Sources. 2014, 257388-393.

[237] Yoo HD, Han SD, Bayliss RDet al. . “Rocking-chair”-type metal hybrid supercapacitors. ACS Appl. Mater. Interfaces. 2016, 8: 30853-30862.

[238] Teffu DM, Ramoroka ME, Makhafola MDet al. . High-performance supercabattery based on reduced graphene oxide/metal organic framework nanocomposite decorated with palladium nanoparticles. Electrochim. Acta. 2022, 412. 140136

[239] Khairy M, Mahmoud KG, Rashwan FAet al. . Nanosized nickel hexacyanoferrate modified screen-printed electrodes as flexible supercabattery platforms: influence of annealing temperatures and supporting electrolytes. J. Energy Storage. 2022, 46. 103872

[240] Yan T, Ding R, Huang YFet al. . A novel sodium-ion supercabattery based on vacancy defective Ni-Co-Mn ternary perovskite fluoride electrode materials. J. Mater. Chem. A. 2021, 9: 14276-14284.

[241] Jia ZY, Ding R, Yu WJet al. . Unraveling the charge storage and activity-enhancing mechanisms of Zn-doping perovskite fluorides and engineering the electrodes and electrolytes for wide-temperature aqueous supercabatteries. Adv. Funct. Mater.. 2022, 32: 2107674.

[242] Zhang Y, Huld F, Lu Set al. . Revisiting polytetrafluorethylene binder for solvent-free lithium-ion battery anode fabrication. Batteries. 2022, 857.

[243] Thiry J, Krier F, Evrard B. A review of pharmaceutical extrusion: critical process parameters and scaling-up. Int. J. Pharm.. 2015, 479227-240.

[244] Boudeville V, Grugeon S, Maurel Aet al. . Solvent-free extrusion of a LiFePO₄-based monofilament for three-dimensional printing of a lithium-ion battery positive electrode. J. Power Sources. 2024, 593. 233973

Funding

Australian Research Council(NI240100355)

The University of Wollongong

RIGHTS & PERMISSIONS

Crown