Dual function of formamidinium chloride additive improves the efficiency and stability of low-dimensional perovskite solar cells

Abstract

Despite their excellent intrinsic stability, low-dimensional Ruddlesden-Popper (LDRP) perovskites face challenges with low power conversion efficiency (PCE), primarily due to the widen bandgap and limited charge transport caused by the bulky spacer cation. Herein, we introduce formamidinium chloride (FACl) as an additive into (4-FPEA)₂MA₄Pb₅I₁₆ perovskite. On the one hand, the addition of FACl narrows the bandgap through cation exchange between MA⁺ and FA⁺, thereby extending the light absorption range and enhancing photocurrent generation. On the other hand, this MA⁺/FA⁺ cation exchange decelerates the sublimation of methylammonium chloride and prolongs the crystallization of LDRP perovskite, leading to higher crystallinity and better film quality with a decreased trap-state density. Consequently, this approach led to a remarkable PCE of 20.46% for <n> = 5 LDRP perovskite solar cells (PSCs), ranking among the highest for MA/FA mixed low dimensional PSCs reported to date. Remarkably, our PSCs maintained 90% and 92% of the initial efficiency even after 1300 h at (60 ± 5)°C and (60 ± 5)% relative humidity, respectively. This work promotes the development of LDRP PSCs with excellent efficiency and environmental stability for potential commercial application.

Keywords

cation exchange / low-dimensional perovskite / solar cell

References

[1] KojimaA, Teshima K, ShiraiY, MiyasakaT. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc. 2009;131(17):6050-6051.

[2] LiF, LinFR, JenAKY. Current state and future perspectives of printable organic and perovskite solar cells. Adv Mater. 2024;36(17):2307161.

[3] GaoY, DongX, LiuY. Recent progress of layered perovskite solar cells incorporating aromatic spacers. Nano-Micro Lett. 2023;15(1):169.

[4] WangL, ZhangT, YuanS, et al. Over 19% efficiency perovskite solar modules by simultaneously suppressing cation deprotonation and iodide oxidation. ACS Appl. Mater Interfaces. 2024;16(4):4751-4762.

[5] ZhangT, QianF, ChenH, et al. Critical role of post-treatment induced surface reconstruction for high performance inorganic tin-lead perovskite solar cells. Chem Eng J. 2024;479:147554.

[6] ZhangT, WangF, ChenH, et al. Synchronized B-site alloying for high-efficiency inorganic tin–lead perovskite solar cells. Appl Phys Rev. 2023;10(4):041417.

[7] ParkJ, KimJ, YunHS, et al. Controlled growth of perovskite layers with volatile alkylammonium chlorides. Nature. 2023;616(7958):724-730.

[8] PengW, MaoK, CaiF, et al. Reducing nonradiative recombination in perovskite solar cells with a porous insulator contact. Science. 2023;379(6633):683-690.

[9] YangL, ZhouH, DuanY, et al. 25.24%-efficiency FACsPbi₃ perovskite solar cells enabled by intermolecular esterification reaction of DL-carnitine hydrochloride. Adv Mater. 2023;35(16):2211545.

[10] JiangQ, ZhaoY, ZhangX, et al. Surface passivation of perovskite film for efficient solar cells. Nat Photonics. 2019;13(7):460-466.

[11] SmithI, HokeE, Solis-IbarraD, McGeheeM, Karunadasa HI. A layered hybrid perovskite solar-cell absorber with enhanced moisture stability. Angew Chem Int Ed. 2014;53(42):11232-11235.

[12] ZhangX, RenX, LiuB, et al. Stable high efficiency two-dimensional perovskite solar cells via cesium doping. Energy Environ Sci. 2017;10(10):2095-2102.

[13] MaC, ShenD, NgT, LoM, LeeC. 2D Perovskites with short interlayer distance for high-performance solar cell application. Adv Mater. 2018;30(22):1800710.

[14] ShaoM, BieT, YangL, et al. Over 21% efficiency stable 2D perovskite solar cells. Adv Mater. 2022;34(1):2107211.

[15] TsaiH, NieW, BlanconJC, et al. High-efficiency two-dimensional Ruddlesden-popper perovskite solar cells. Nature. 2016;536(7616):312-316.

[16] ZhaoX, LiuT, KaplanA, Yao C, LooYL. Accessing highly oriented two-dimensional perovskite films via solvent-vapor annealing for efficient and stable solar cells. Nano Lett. 2020;20(12):8880-8889.

[17] LaiH, KanB, LiuT, et al. Two-dimensional Ruddlesden–popper perovskite with nanorod-like morphology for solar cells with efficiency exceeding 15%. J Am Chem Soc. 2018;140(37):11639-11646.

[18] ShiJ, GaoY, GaoX, et al. Fluorinated low-dimensional Ruddlesden–popper perovskite solar cells with over 17% power conversion efficiency and improved stability. Adv Mater. 2019;31(37):1901673.

[19] ShiJ, JinX, WuY, ShaoM. Mixed bulky cations for efficient and stable Ruddlesden–popper perovskite solar cells. Apl Mater. 2020;8(10):101102.

[20] ZhangX, WuG, YangS, et al. Vertically oriented 2D layered perovskite solar cells with enhanced efficiency and good stability. Small. 2017;13(33):1700611.

[21] QingJ, LiuX, LiM, et al. Aligned and graded type-II Ruddlesden–popper perovskite films for efficient solar cells. Adv Energy Mater. 2018;8(21):1800185.

[22] YangR, LiR, CaoY, et al. Oriented quasi-2D perovskites for high performance optoelectronic devices. Adv Mater. 2018;30(51):1804771.

[23] LiF, ZhangJ, JoS, et al. Vertical orientated Dion–Jacobson quasi-2D perovskite film with improved photovoltaic performance and stability. Small Methods. 2020;4(5):1900831.

[24] ZhengF, ZuoC, NiuM, et al. Revealing the role of methylammonium chloride for improving the performance of 2D perovskite solar cells. ACS Appl Mater Interfaces. 2020;12(23):25980-25990.

[25] XuH, JiangY, HeT, et al. Orientation regulation of tin-based reduced-dimensional perovskites for highly efficient and stable photovoltaics. Adv Func Mater. 2019;29(47):1807696.

[26] XieY, YuH, DuanJ, Xu L, HuB. Enhancing device performance in quasi-2D perovskite ((BA)₂(MA)₃Pb₄i₁₃) solar cells using PbCl₂ additives. ACS Appl Mater Interfaces. 2020;12(9):11190-11196.

[27] YangL, ShiJ, WuY, et al. Long carrier diffusion length and efficient charge transport in thick quasi-two-dimensional perovskite solar cells enabled by modulating crystal orientation and phase distribution. ACS Appl Energy Mater. 2022;5(7):8930-8939.

[28] WuY, LiX, FuS, WanL, FangJ. Efficient methylammonium lead trihalide perovskite solar cells with chloroformamidinium chloride (Cl-FACl) as an additive. J Mater Chem A. 2019;7(14):8078-8084.

[29] GuoF, QiuS, HuJ, et al. A generalized crystallization protocol for scalable deposition of high-quality perovskite thin films for photovoltaic applications. Adv Sci. 2019;6(17):1901067.

[30] SzostakR, SilvaJ, Turren-CruzS, et al. Nanoscale mapping of chemical composition in organic-inorganic hybrid perovskite films. Sci Adv. 2019;5(10):eaaw6619.

[31] ZhangH, LvY, WangJ, Ma H, SunZ, HuangW. Influence of Cl incorporation in perovskite precursor on the crystal growth and storage stability of perovskite solar cells. ACS Appl Mater Interfaces. 2019;11(6):6022-6030.

[32] YangY, LiuC, KandaH, et al. Expanded phase distribution in low average layer-number 2D perovskite films: toward efficient semitransparent solar cells. Adv Func Mater. 2021;31(40):2104868.

[33] AnayaM, Galisteo-López J, CalvoM, LópezC, Míguez H. Photophysical analysis of the formation of organic–inorganic trihalide perovskite films: identification and characterization of crystal nucleation and growth. J Phys Chem C. 2016;120(5):3071-3076.

[34] SuchanK, JustJ, BeckerP, Unger E, UnoldT. Optical in situ monitoring during the synthesis of halide perovskite solar cells reveals formation kinetics and evolution of optoelectronic properties. J Mater Chem A. 2020;8(20):10439-10449.

[35] XieYM, YuB, MaC, et al. Direct observation of cation-exchange in liquid-to-solid phase transformation in FA1-_xMA_xPbi₃ based perovskite solar cells. J Mater Chem A. 2018;6(19):9081-9088.

[36] YangL, ZhangY, MaJ, ChenP, YuY, ShaoM. Pure red light-emitting diodes based on quantum confined quasi-two-dimensional perovskites with cospacer cations. ACS Energy Lett. 2021;6(7):2386-2394.

[37] ChoH, JeongSH, ParkMH, et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science. 2015;350(6265):1222-1225.

[38] HeX, ChenJ, RenX, et al. 40.1% record low-light solar-cell efficiency by holistic trap-passivation using micrometer-thick perovskite film. Adv Mater. 2021;33(27):2100770.

[39] KimM, KimGH, LeeT, et al. Methylammonium chloride induces intermediate phase stabilization for efficient perovskite solar cells. Joule. 2019;3(9):2179-2192.

[40] HeZ, LiM, JiaH, et al. Managing interfacial charged defects with multiple active sited macrocyclic valinomycin for efficient and stable inverted perovskite solar cells. Adv Mater. 2023;35(51):2304918.

[41] YuanJ, ZhangD, DengB, Du J, ChoyW, TianJ. High efficiency inorganic perovskite solar cells based on low trap density and high carrier mobility CsPbi₃ films. Adv Func Mater. 2022;32(47):2209070.

[42] GuoY, LeiH, XiongL, Li B, FangG. An integrated organic-inorganic hole transport layer for efficient and stable perovskite solar cells. J Mater Chem A. 2018;6(5):2157-2165.

[43] ChoiMJ, LeeYS, ChoI, et al. Functional additives for high-performance inverted planar perovskite solar cells with exceeding 20% efficiency: selective complexation of organic cations in precursors. Nano Energy. 2020;71:104639.

RIGHTS & PERMISSIONS

2024 The Author(s). Electron published by Harbin Institute of Technology and John Wiley & Sons Australia, Ltd.