Multifunctional Phosphorus Doping: Integrating Enhanced Ionic/Electronic Transport and Interface Optimization for Silicon Oxycarbide Anodes
Yingying Shen , Yun Zheng , Jiangmin Jiang , Yike Huang , Yinan Liu , Rong Chen , Pingshan Jia , Lifen Long , Congcong Zhang , Huaiyu Shao
Energy & Environmental Materials ›› 2026, Vol. 9 ›› Issue (5) : e70301
Polymer-derived silicon oxycarbide (SiOC) is a promising anode material for lithium-ion batteries due to its high specific capacity, low operating potential, structural stability, and tunable components. However, its practical application is hindered by poor intrinsic electronic/ionic conductivity and unstable solid-electrolyte interphase (SEI). Herein, in this work, a phosphorus (P)-doped SiOC material was successfully synthesized, and the P is incorporated into the SiOC network via P–O–Si bonding. This P-doping strategy introduced additional free electrons and enhanced the ordering of free-carbon phase. Also, it induced the formation of LiF and Li3PO4-rich SEI. These modifications collaboratively led to good rate performance and cycling stability. The optimized SiOC-P electrode delivered a high reversible capacity of 860.1 mAh g−1, an excellent capacity retention of 81.1% after 700 cycles at 1.0 A g−1, and a good rate capacity of 383.4 mAh g−1 even at 5.0 A g−1. Density functional theory calculations also reveal that Si–O–P promotes the ionic/electronic transport among the SiOC-P bulk. This work offers valuable insights into heteroatom doping strategies for tailoring SiOC-based materials and facilitates their practical application in high-energy-density batteries.
lithium-ion battery / phosphorus doping / silicon oxycarbide / solid-electrolyte interface
| [1] |
|
| [2] |
|
| [3] |
|
| [4] |
|
| [5] |
|
| [6] |
|
| [7] |
|
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
|
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
|
| [22] |
|
| [23] |
|
| [24] |
|
| [25] |
|
| [26] |
|
| [27] |
|
| [28] |
|
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
|
| [33] |
|
| [34] |
|
| [35] |
|
| [36] |
|
| [37] |
|
| [38] |
|
| [39] |
|
| [40] |
|
| [41] |
|
| [42] |
|
| [43] |
|
| [44] |
|
| [45] |
|
| [46] |
|
| [47] |
|
| [48] |
|
| [49] |
|
| [50] |
|
| [51] |
|
| [52] |
|
| [53] |
|
| [54] |
|
| [55] |
|
| [56] |
|
| [57] |
|
| [58] |
|
| [59] |
|
| [60] |
|
| [61] |
|
| [62] |
|
| [63] |
|
| [64] |
|
| [65] |
|
| [66] |
|
| [67] |
|
| [68] |
|
| [69] |
|
| [70] |
|
2026 The Author(s). Energy & Environmental Materials published by John Wiley & Sons Australia, Ltd on behalf of Zhengzhou University.
/
| 〈 |
|
〉 |