Process parametric optimization toward augmentation of silica yield using Taguchi technique and artificial neural network approach

Abstract

This study was attempted towards the retrieval of silica from rice husk ash to annihilate the local problems of disposal from the rice milling industries for enhancement of silica purity. Optimization of process factors using the Taguchi technique involved variation in sodium hydroxide concentration (NaOH), alkali impregnation volume per unit weight of the rice husk ash, and reaction time for designing the experimental matrix utilizing L16 orthogonal array at four different levels. The maximum silica extraction was 98.26% obtained with 4 N of NaOH, 20 ml/g of alkali volume, and treatment time 60 min. The identical experimental data set was also applied to an artificial neural network model (ANN) with the LM algorithm for predicting the feasibility of the extraction process. Both Taguchi and neural networks suggested a high coefficient of determination and a satisfactory correlation between experimental and predicted silica recovery values. The detailed characterization of the synthesized silica powder and residual rice husk ash was executed using field emission scanning electron microscopy (energy-dispersive spectroscopy), Fourier transform infrared spectroscopy, thermogravimetric, Brunauer Emmett Tellet surface area, and particle size analysis. The simultaneous reuse of residual ash and silicate was performed to ensure the best possible reclamation of silica and reusability of rice husk ash. The detailed cost estimation of the synthesized silica powder further suggested the effectiveness of the optimized process. Thus, a comprehensive approach for enhancement of the silica yield and purity by adopting Taguchi and ANN optimization proved to be useful in this study.

Keywords

Rice husk ash / Silica / Taguchi approach / Artificial neural network modeling / Cost estimation

References

[1] Alvarez J, Lopez G, Amutio M, Bilbao J, Olazar M. Upgrading the rice husk char obtained by flash pyrolysis for the production of amorphous silica and high quality activated carbon. Bioresour Technol, 2014, 170: 132-137

[2] Anderko A, Pitzer KS. Equation of state for pure sodium chloride. Fluid Phase Equilib, 1992, 79: 103-112

[3] Banerjee P, Barman SR, Sikdar D, Roy U, Mukhopadhayay A, Das P. Enhanced degradation of ternary dye effluent by developed bacterial consortium with RSM optimization, ANN modeling and toxicity evaluation. Desalin Water Treat, 2017, 72: 249-265

[4] Blissett R, Sommerville R, Rowson N, Jones J, Laughlin B. Valorisation of rice husks using a TORBED combustion process. Fuel Process Technol, 2017, 159: 247-255

[5] Brinker CJ, Scherer GW. Applications in sol–gel science, the physics and chemistry of sol–gel processing, 1990 San Diego Academic Press Inc. 839-880

[6] Dhawane SH, Kumar T, Halder G. Biodiesel synthesis from Hevea brasiliensis oil employing carbon supported heterogeneous catalyst: optimization by Taguchi method. Renew Energy, 2016, 89: 506-514

[7] Dutta S, Parsons SA, Bhattacharjee C, Bandhyopadhyay S, Datta S. Development of an artificial neural network model for adsorption and photocatalysis of reactive dye on TiO₂ surface. Expert Syst Appl, 2010, 37(12): 8634-8638

[8] Erkan O, Isik B, Çiçek A, Kara F. Prediction of damage factor in end milling of glass fibre reinforced plastic composites using artificial neural network. Appl Compos Mater, 2013, 20: 517-536

[9] Food and Agriculture Organization of the United Nations, Rice market monitor trade and markets division, volume XX, issue no. 1, April 2017. http://www.fao.org/3/I9243EN/i9243en.pdf

[10] Geetha D, Ananthiand A, Ramesh PS. Preparation and characterization of silica material from rice husk ash—an economically viable method. Res Rev J Pure Appl Phys (RRJPAP), 2016, 4(3): 1-7

[11] Ghorbani F, Sanati AM, Maleki M. Production of silica nanoparticles from rice husk as agricultural waste by environmental friendly technique. Environ Stud Persian Gulf, 2015, 2(1): 56-65

[12] Hameed BH, Ahmad AA, Aziz N. Adsorption of reactive dye on palm-oil industry waste: equilibrium, kinetic and thermodynamic studies. Desalination, 2009, 247(1–3): 551-560

[13] Iler RK. Iler RK. The surface chemistry of silica. The chemistry of silica: solubility, polymerization, colloid and surface properties and biochemistry, 1979 New York Wiley 462-599

[14] Kamath S, Proctor A. Silica gel from rice hull ash: preparation and characterization. Cereal Chem, 1998, 75(4): 484-487

[15] Kara F. Taguchi optimization of surface roughness and flank wear during the turning of DIN 1.2344 tool steel. Mater Test, 2017, 59(10): 903-908

[16] Kara F, Öztürk B (2018) Comparison and optimization of PVD and CVD method on surface roughness and flank wear in hard-machining of DIN 1.2738 mold steel. Sensor Review, Emerald Publishing Limited. ISSN 0260-2288. https://doi.org/10.1108/sr-12-2017-0266

[17] Kara F, Aslantas K, Cicek A. ANN and multiple regression method-based modelling of cutting forces in orthogonal machining of AISI 316L stainless steel. Neural Comput Appl, 2015, 26(1): 237-250

[18] Kara F, Aslantas K, Cicek A. Prediction of cutting temperature in orthogonal machining of AISI316L using artificial neural network. Appl Soft Comput, 2016, 38: 64-74

[19] Karabatak M, Kara F. Experimental optimization of surface roughness in hard turning of AISI D2 cold work tool steel. J Polytech, 2016, 19(3): 349-355

[20] Karmakar B, Dhawane SH, Halder G. Optimization of biodiesel production from castor oil by Taguchi design. J Environ Chem Eng, 2018, 6(2): 2684-2695

[21] Khataee A, Khani A. Modelling of nitrate adsorption on granular activated carbon (GAC) using artificial neural network (ANN). Int J Chem React Eng, 2009

[22] Kumar A, Bhunia B, Dasgupta D, Mandal T, Dey A, Datta S, Bhattacharya P. Optimization of culture condition for growth and phenol degradation by Alcaligenes faecalis JF339228 using Taguchi methodology. Desalin Water Treat, 2013, 51(16–18): 3153-3316

[23] Kumar S, Chary GHVC, Dastidar MG. Optimization studies on coal-oil agglomeration using Taguchi (L16) experimental design. Fuel, 2015, 141(1): 9-16

[24] Kumar A, Singha S, Dasgupta D, Mandal T. Simultaneous recovery of silica and treatment of rice mill wastewater using rice husk ash: an economic approach. Ecol Eng, 2015, 84: 29-37

[25] Kumar A, Priyadarshinee R, Roy A, Dasgupta D, Mandal T. Current techniques in rice mill effluent treatment: emerging opportunities for waste reuse and waste-to-energy conversion. Chemosphere, 2016, 164: 404-412

[26] Kumar A, Sengupta B, Dasgupta D, Mandal T, Datta S. Recovery of value added products from rice husk ash to explore an economic way for recycle and reuse of agricultural waste. Rev Environ Sci Biotechnol, 2016, 15: 47-65

[27] Kumar A, Singha S, Dasgupta D, Mandal T. Intensive insight into the enhanced utilization of rice husk ash: abatement of rice mill wastewater and recovery of silica as a value added product. Ecol Eng, 2016, 91: 270-281

[28] Liou TH, Wu SJ. Characteristics of microporous/mesoporous carbons prepared from rice husk under base- and acid-treated conditions. J Hazard Mater, 2009, 171(1–3): 693-703

[29] Mondal S, Aikat K, Halder G. Biosorptive uptake of arsenic (V) by steam activated carbon from mung bean husk: equilibrium, kinetics, thermodynamics and modelling. Appl Water Sci, 2017, 7: 4479-4495

[30] Park BD, Wi SG, Lee KH, Singh AP, Yoon TH, Kim YS. Characterization of anatomical features and silica distribution in rice husk using microscopic and micro-analytical techniques. Biomass Bioenergy, 2003, 25(3): 319-327

[31] Phadke MS. Quality engineering using robust design, 2012 New Delhi Pearson Education

[32] Prasad R, Pandey M. Rice husk ash as a renewable source for the production of value added silica gel and its application: an overview. Bull Chem React Eng Catal, 2012, 7(1): 1-25

[33] Rao RVK, Subrahmanyam J, Kumar TJ. Studies on the formation of black particles in rice husk silica ash. J Eur Ceram Soc, 2001, 21(1): 99-104

[34] Real C, Alcalá MD, Criado JM. Preparation of silica from rice husks. J Am Ceram Soc, 1996, 79(8): 2012-2016

[35] Sinha K, Saha PD, Datta S. Response surface optimization and artificial neural network modelling of microwave assisted natural dye extraction from pomegranate rind. Ind Crops Prod, 2012, 37(1): 408-414

[36] Sun LY, Gong KC. Silicon-based materials from rice husks and their applications. Ind Eng Chem Res, 2001, 40(25): 5861-5877

[37] Taguchi G (1986) Introduction to quality engineering. Asian Productivity Organization, American Supplier Institute Inc., Dearborn. ISBN 9283310845, 9789283310846

[38] Tong LI, Wang CH, Chen CC, Chen CT. Dynamic multiple responses by ideal solution analysis. Eur J Oper Res, 2004, 156(2): 433-444

[39] Vaish B, Srivastava V, Singh P, Singh A, Singh PK, Singh RP. Exploring untapped energy potential of urban solid waste. Energy Ecol Environ, 2016, 1(5): 323-342

[40] Witoon T, Chareonpanich M, Limtrakul J. Synthesis of bimodal porous silica from rice husk ash via sol–gel process using chitosan as template. Mater Lett, 2008, 62(10–11): 1476-1479

[41] Yalcin N, Sevinc V. Studies on silica obtained from rice husk. Ceram Int, 2001, 27(2): 219-224

[42] Zhou J, Wu D, Guo D. Optimization of the production of thiocarbohydrazide using the Taguchi method. J Chem Technol Biotechnol, 2010, 85: 1402-1406

Funding

Ministry of Human Resource Development