High-efficiency solar selective absorber: Using the high-entropy nitride MoTaTiCrN nanoceramics as a perspective strategy

Abstract

High-entropy materials have sparked significant interest in varied applications, particularly in solar-thermal technologies such as solar-driven desalination and concentrating solar power (CSP) systems. In this context, high-entropy nitrides, as novel solar selective absorbers (SSAs) materials, play a crucial role in these applications, demonstrating excellent spectral selectivity and strong thermal and chemical stability at high temperatures and in harsh environments. However, the underlying sunlight absorption mechanisms, atomic-level structures, and programmatic design route of these SSAs still need further investigation. Herein, a high-entropy alloy (MoTaTiCr) target was used to construct gradient high-entropy nitride films via magnetron sputtering in the nitrogen atmosphere. The atomic-level microstructure study revealed the crystal structure characteristics in the MoTaTiCrN layer. Computer simulations and density functional theory calculations aided in the design and understanding of the possible solar absorption mechanisms. The as-deposited SSA exhibited impressive optical properties (α = 95.2%; ε = 6.8%) and demonstrated excellent thermal robustness, maintaining performance after long-term annealing at 600℃ for 300 h. Its photothermal conversion efficiency reached 87.9% at 600℃ under 100 suns. As a proof-of-concept demonstration, the SSA, used in a solar-powered photothermal desalination unit, showed a high evaporation efficiency since the excellent optical performance as well as the thermal management.

Keywords

high-entropy materials / solar absorption / solar selective absorber / thermal emissivity / thermal robustness

References

[1] Shi Y, Li R, Jin Y, et al. A 3D photothermal structure toward improved energy efficiency in solar steam generation. Joule. 2018; 2(6): 1171-1186.

[2] Lin K-T, Lin H, Yang T, Jia B. Structured graphene metamaterial selective absorbers for high efficiency and omnidirectional solar thermal energy conversion. Nat Commun. 2020; 11(1):1389.

[3] Li Z, Zhang J-H, Li J, et al. Dynamical janus-like behavior excited by passive cold-heat modulation in the earth-sun/universe system: opportunities and challenges. Small. 2024; 20(32):2309397.

[4] An S, Shi B, Jiang M, et al. Biological and bioinspired thermal energy regulation and utilization. Chem Rev. 2023; 123(11): 7081-7118.

[5] Cui X, Ruan Q, Zhuo X, et al. Photothermal nanomaterials: a powerful light-to-heat converter. Chem Rev. 2023; 123(11): 6891-6952.

[6] He C-Y, Li Y, Zhou Z-H, Liu B-H, Gao X-H. High-entropy photothermal materials. Adv Mater. 2024; 36(24):2400920.

[7] Zhang J, Wang C, Shi J, Wei D, Zhao H, Ma C. Solar selective absorber for emerging sustainable applications. Advanced Energy and Sustainability Research. 2022; 3(3):2100195.

[8] Xu K, Du M, Hao L, Mi J, Yu Q, Li S. A review of high-temperature selective absorbing coatings for solar thermal applications. Journal of Materiomics. 2020; 6(1): 167-182.

[9] Moon J, Lu D, VanSaders B, et al. High performance multi-scaled nanostructured spectrally selective coating for concentrating solar power. Nano Energy. 2014; 8: 238-246.

[10] Li Y, Xiong C, Huang H, et al. 2D Ti₃C₂T_x MXenes: visible black but infrared white materials. Adv Mater. 2021; 33(41):2103054.

[11] Wang X, Gao J, Hu H, et al. High-temperature tolerance in WTi-Al₂O₃ cermet-based solar selective absorbing coatings with low thermal emissivity. Nano Energy. 2017; 37: 232-241.

[12] Valleti K, Rao SG, Miryalkar P, Sandeep A, Rao DS. Cr-(CrN/TiAlN)m-AlSiN-AlSiO open-air stable solar selective coating for concentrated solar thermal power applications. Sol Energy Mater Sol Cell. 2020; 215:110634.

[13] Wu Z, Liu Y, Wei D, et al. Enhanced spectral selectivity through the quasi-optical microcavity based on W-SiO₂ cermet. Materials Today Physics. 2019; 9:100089.

[14] Wang J, Ren Z, Luo Y, et al. High-performance spectrally selective absorber using the ZrB₂-based all-ceramic coatings. ACS Appl Mater Interfaces. 2021; 13(34): 40522-40530.

[15] Feng L, Huo P, Liang Y, Xu T. Photonic metamaterial absorbers: morphology engineering and interdisciplinary applications. Adv Mater. 2020; 32(27):1903787.

[16] Yang Y, Jin Q, Mao D, et al. Dually ordered porous TiO₂-rGO composites with controllable light absorption properties for efficient solar energy conversion. Adv Mater. 2017; 29(4):1604795.

[17] Meng J-p, Guo R-r, Li H, Zhao L-m, Liu X-p, Li Z. Microstructure and thermal stability of Cu/Zr_0.3Al_0.7N/Zr_0.2Al_0.8N/Al₃₄O₆₀N₆ cermet-based solar selective absorbing coatings. Appl Surf Sci. 2018; 440: 932-938.

[18] Wang X, Zhang X, Li Q, Min J, Cheng X. Spectral properties of AlCrNO-based multi-layer solar selective absorbing coating during the initial stage of thermal aging upon exposure to air. Sol Energy Mater Sol Cell. 2018; 188: 81-92.

[19] Zhou Z-H, He C-Y, Gao X-H. Recent advances of spectrally selective absorbers: materials, nanostructures, and photothermal power generation. APL Energy. 2024; 2(1):011503.

[20] Ning Y, Wang W, Wang L, et al. Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO₂ solar selective absorbing coating. Sol Energy Mater Sol Cell. 2017; 167: 178-183.

[21] Dan A, Soum-Glaude A, Carling-Plaza A, et al. Temperature- and angle-dependent emissivity and thermal shock resistance of the W/WAlN/WAlON/Al₂O₃-based spectrally selective absorber. ACS Appl Energy Mater. 2019; 2(8): 5557-5567.

[22] Soum-Glaude A, Le Gal A, Bichotte M, Escape C, Dubost L. Optical characterization of TiAlN_x/TiAlN_y/Al₂O₃ tandem solar selective absorber coatings. Sol Energy Mater Sol Cell. 2017; 170: 254-262.

[23] Weinstein LA, Loomis J, Bhatia B, Bierman DM, Wang EN, Chen G. Concentrating solar power. Chem Rev. 2015; 115(23): 12797-12838.

[24] Céspedes E, Rodríguez-Palomo A, Salas-Colera E, et al. Role of Al₂O₃ antireflective layer on the exceptional durability of Mo-Si-N-based spectrally selective coatings in air at high temperature. ACS Appl Energy Mater. 2018; 1(11): 6152-6160.

[25] Valleti K, Murali Krishna D, Joshi SV. Functional multi-layer nitride coatings for high temperature solar selective applications. Sol Energy Mater Sol Cell. 2014; 121: 14-21.

[26] Cheng P, Wang D, Schaaf P. A review on photothermal conversion of solar energy with nanomaterials and nanostructures: from fundamentals to applications. Advanced Sustainable Systems. 2022; 6(9):2200115.

[27] Li X, Cooper T, Xie W, Hsu P-C. Design and utilization of infrared light for interfacial solar water purification. ACS Energy Lett. 2021; 6(8): 2645-2657.

[28] Ni G, Li G, Boriskina SV, et al. Steam generation under one sun enabled by a floating structure with thermal concentration. Nat Energy. 2016; 1(9):16126.

[29] Yeh JW, Chen SK, Lin SJ, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater. 2004; 6(5): 299-303.

[30] Wang X, Guo W, Fu Y. High-entropy alloys: emerging materials for advanced functional applications. J Mater Chem A. 2021; 9(2): 663-701.

[31] George EP, Raabe D, Ritchie RO. High-entropy alloys. Nat Rev Mater. 2019; 4(8): 515-534.

[32] Chen T-K, Wong M-S, Shun T-T, Yeh J-W. Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering. Surf Coating Technol. 2005; 200(5): 1361-1365.

[33] Jin T, Sang X, Unocic RR, et al. Mechanochemical-assisted synthesis of high-entropy metal nitride via a soft urea strategy. Adv Mater. 2018; 30(23):1707512.

[34] Rost CM, Sachet E, Borman T, et al. Entropy-stabilized oxides. Nat Commun. 2015; 6(1):8485.

[35] Wang W-M, Liu B-H, He C-Y, et al. High-entropy engineering for broadband infrared radiation. Adv Funct Mater. 2023; 33(43):2303197.

[36] Sarker P, Harrington T, Toher C, et al. High-entropy high-hardness metal carbides discovered by entropy descriptors. Nat Commun. 2018; 9(1):4980.

[37] Castle E, Csanádi T, Grasso S, Dusza J, Reece M. Processing and properties of high-entropy ultra-high temperature carbides. Sci Rep. 2018; 8(1):8609.

[38] Li T, Yao Y, Huang Z, et al. Denary oxide nanoparticles as highly stable catalysts for methane combustion. Nat Catal. 2021; 4(1): 62-70.

[39] Zhang Y, Guo W-M, Jiang Z-B, et al. Dense high-entropy boride ceramics with ultra-high hardness. Scripta Mater. 2019; 164: 135-139.

[40] He C-Y, Zhao P, Zhang H, et al. Efficient warming textile enhanced by a high-entropy spectrally selective nanofilm with high solar absorption. Adv Sci. 2023; 10(3):2204817.

[41] He C-Y, Zhao P, Gao X-H, Liu G, La P-Q. Efficient solar energy harvesting enabled by high-entropy ceramic nanofilms through a co-sputtering method. J Alloys Compd. 2023; 934:167899.

[42] Liu X, Zhao P, He C-Y, et al. Enabling highly enhanced solar thermoelectric generator efficiency by a CuCrMnCoAlN-based spectrally selective absorber. ACS Appl Mater Interfaces. 2022; 14(44): 50180-50189.

[43] Song P, Wang C, Ren J, et al. Modulation of the cutoff wavelength in the spectra for solar selective absorbing coating based on high-entropy films. Int J Miner Metall Mater. 2020; 27(10): 1371-1378.

[44] Pelenovich V, Liu H, Zeng X, Liu Y, Liu K, Yang B. Graded solar selective absorbers deposited by non-equilibrium RF magnetron sputtering. Sol Energy Mater Sol Cell. 2021; 230:111188.

[45] Li H, Han Y, Zhao H, et al. Fast site-to-site electron transfer of high-entropy alloy nanocatalyst driving redox electrocatalysis. Nat Commun. 2020; 11(1):5437.

[46] Li L-C, Li M-X, Liu M, et al. Enhanced oxidation resistance of MoTaTiCrAl high entropy alloys by removal of Al. Sci China Mater. 2021; 64(1): 223-231.

[47] Yao Y, Huang Z, Hughes LA, et al. Extreme mixing in nanoscale transition metal alloys. Matter. 2021; 4(7): 2340-2353.

[48] Barshilia HC, Rajam KS. Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatings. J Mater Res. 2004; 19(11): 3196-3205.

[49] He C-Y, Gao X-H, Yu D-M, Guo H-X, Zhao S-S, Liu G. Highly enhanced thermal robustness and photothermal conversion efficiency of solar-selective absorbers enabled by high-entropy alloy nitride MoTaTiCrN nanofilms. ACS Appl Mater Interfaces. 2021; 13(14): 16987-16996.

[50] Li Y, Liao Y, Zhang J, et al. High-entropy-alloy nanoparticles with enhanced interband transitions for efficient photothermal conversion. Angew Chem Int Ed. 2021; 60(52): 27113-27118.

[51] Liu B, He C, Li Y, et al. Quasi-metallic high-entropy spinel oxides for full-spectrum solar energy harvesting. Matter. 2024; 7(1): 140-157.

[52] Li Y, Lin C, Zhou D, et al. Scalable all-ceramic nanofilms as highly efficient and thermally stable selective solar absorbers. Nano Energy. 2019; 64:103947.

[53] Cao PP, Huang HL, Jiang SH, et al. Microstructural stability and aging behavior of refractory high entropy alloys at intermediate temperatures. J Mater Sci Technol. 2022; 122: 243-254.

[54] Wu Z, Wang J, Liu Y, et al. A review of spectral controlling for renewable energy harvesting and conserving. Materials Today Physics. 2021; 18:100388.

[55] Qiu X-L, He C-Y, Zhao P, et al. Reinforcement optical performance and thermal tolerance in a TiB₂-HfB₂-based double-layer spectral selective absorber via a pre-annealing strategy. Materials Today Physics. 2022; 24:100690.

[56] He C-Y, Zhao P, Gao X-H, Liu G, La P-Q. Enhancing thermal robustness of a high-entropy nitride based solar selective absorber by the incorporation of Al element. Materials Today Physics. 2022; 27:100836.

[57] Nuru ZY, Msimanga M, Muller TFG, Arendse CJ, Mtshali C, Maaza M. Microstructural, optical properties and thermal stability of MgO/Zr/MgO multilayered selective solar absorber coatings. Sol Energy. 2015; 111: 357-363.

[58] Gao J, Tu C, Liang L, et al. Silver nanoparticles with an armor layer embedded in the alumina matrix to form nanocermet thin films with sound thermal stability. ACS Appl Mater Interfaces. 2014; 6(14): 11550-11557.

[59] Cao F, Kraemer D, Sun T, Lan Y, Chen G, Ren Z. Enhanced thermal stability of W-Ni-Al₂O₃ cermet-based spectrally selective solar absorbers with tungsten infrared reflectors. Adv Energy Mater. 2015; 5(2):1401042.

[60] Wang H, Alshehri H, Su H, Wang L. Design, fabrication and optical characterizations of large-area lithography-free ultrathin multilayer selective solar coatings with excellent thermal stability in air. Sol Energy Mater Sol Cell. 2018; 174: 445-452.

[61] Cao F, Kraemer D, Tang L, et al. A high-performance spectrally-selective solar absorber based on a yttria-stabilized zirconia cermet with high-temperature stability. Energy Environ Sci. 2015; 8(10): 3040-3048.

[62] Shimizu M, Suzuki M, Iguchi F, Yugami H. High spectral selectivity for solar absorbers using a monolayer transparent conductive oxide coated on a metal substrate. J Appl Phys. 2017; 121(18):183103.

[63] Li W, Guler U, Kinsey N, et al. Refractory plasmonics with titanium nitride: broadband metamaterial absorber. Adv Mater. 2014; 26(47): 7959-7965.

[64] Chua YT, Stair PC, Wachs IE. A comparison of ultraviolet and visible Raman spectra of supported metal oxide catalysts. J Phys Chem B. 2001; 105(36): 8600-8606.

[65] He C-Y, Zhang X, Yu D-M, Zhao S-S, Liu G, Gao X-H. Toward a scalable and cost-conscious structure in spectrally selective absorbers: using high-entropy nitride TiVCrAlZrN. ACS Appl Energy Mater. 2021; 4(9): 8801-8809.

[66] Li X, Ni G, Cooper T, et al. Measuring conversion efficiency of solar vapor generation. Joule. 2019; 3(8): 1798-1803.

[67] Li Z, Xu X, Sheng X, et al. Solar-powered sustainable water production: state-of-the-art technologies for sunlight-energy-water nexus. ACS Nano. 2021; 15(8): 12535-12566.

RIGHTS & PERMISSIONS

2024 The Author(s). EcoEnergy published by John Wiley & Sons Australia, Ltd on behalf of China Chemical Safety Association.