Predicting rock blasting outcomes in mining has been crucial since its inception. Blasting remains the most energy- and cost-efficient method for rock breaking and is often the only practical option. However, the mechanism is complex, influenced by various rock properties, explosives, and blast design parameters, making their effects difficult to quantify. Traditional stress-based models struggle with many parameters, such as stress and Poisson's ratio, which are challenging to measure in the field. Empirical models, though simpler, often oversimplify blast conditions. Both types of models are limited to simulating a few blastholes and cannot handle full-scale blasts involving hundreds of blastholes. However, modeling full-scale blasts with all blast design parameters is most required for modern mining applications. This paper presents a novel strain-based modeling approach for blasting and geomechanical applications, utilizing measurable variables such as particle velocity, strain, and displacement. By bypassing complex constitutive relations, strain-based models capture critical blasting trends and simulate full-scale blasts with full-blast design parameters with minimal calibration. The framework encompasses field strain measurements, model construction based on measurable variables, and laboratory-derived strain-failure criteria, each offering potential for future enhancement. Additionally, a standardized field test for site characterization is recommended. The approach is demonstrated through the Multiple Blasthole Fragmentation model, which simulates rock fragmentation and fragment strain during blasting, highlighting the practicality and effectiveness of strain-based modeling for multiple blasthole blasts. Moreover, this approach extends beyond blasting, with potential applications in highwall stability monitoring and other geomechanical applications. Strain-based modeling provides a simplified yet effective solution, avoiding the complexities of rock constitutive relations and field stress measurements while enabling full-blast design simulations for large-scale field blasts.
| [1] |
Bawden WF. The expanding impact of technology on underground geomechanical mine design and operations—Advances, limitations and future needs. In: Potvin Y, ed. Design Methods 2015: Proceedings of the International Seminar on Design Methods in Underground Mining. Australian Centre for Geomechanics; 2015: 3-19.
|
| [2] |
Cai M. Practical estimates of tensile strength and Hoek-Brown strength parameter mi of brittle rocks. Rock Mech Rock Eng. 2010; 43(2): 167-184.
|
| [3] |
Cai M, Peng H. Advances of in situ stress measurement in China. Int J Rock Mech. Min Sci. Geomech Abstr. 2011; 3(4): 373-384.
|
| [4] |
Chandler NA. Quantifying long-term strength and rock damage properties from plots of shear strain versus volume strain. Int J Rock Mech Min Sci. 2013; 59: 105-110.
|
| [5] |
Cunningham CVB. The Kuz-Ram fragmentation model—20 years on. In: Holmberg R., ed. Brighton Conference Proceedings 2005. European Federation of Explosives Engineers; 2005: 201-205.
|
| [6] |
Fischer DJ. Near Surface Stress Measurements in a candidate rock mass for superconductive magnetic energy storage. MS thesis. University of Wisconsin-Madison; 1982.
|
| [7] |
Ghosh AK. Rock stress measurements for underground excavations. The 12th International Conference of International Association for Computer Methods and Advances in Geomechanics (IACMAG); October 1-6, 2008; Goa, India.
|
| [8] |
Hoek E, Brown ET. The Hoek-Brown failure criterion and GSI-2018 edition. J Rock Mech Geotech Eng. 2019; 11(3): 445-463.
|
| [9] |
Hojem JPM, Cook NGW, Heins C. A stiff, two maga-Newton testing machine for measuring the work softening behavior of brittle materials. SA Mech Engr. 1975; 25: 250-270.
|
| [10] |
Hudson JA, Harrison JP. Engineering Rock Mechanics: An Introduction to the Principles. Elsevier Science Ltd. 1997.
|
| [11] |
Jaeger JG, Cook NGW. Fundamentals of Rock Mechanics. Chapman and Hall, John Wiley & Sons, Inc; 1976.
|
| [12] |
Kim K, Franklin A. Suggested methods for rock stress determination. Int J Rock Mech Min Sci Geomech Abstr. 1987; 24(1): 53-74.
|
| [13] |
Kwaśniewski M, Takahashi M. Strain-based failure criteria for rocks. In: Rock Mechanics in Civil and Environmental Engineering. CRC Press; 2010: 45-56. http://www.crcnetbase.com/doi/abs/10.1201/b10550-7
|
| [14] |
Lin W, Kwaśniewski M, Imamura T, Matsuki K. Determination of three-dimensional in situ stresses from anelastic strain recovery measurement of cores at great depth. Tectonophysics. 2006; 426: 221-238.
|
| [15] |
Ljunggren C, Chang Y, Janson T, Christiansson R. An overview of rock stress measurement methods. Int J Rock Mech Min Sci. 2003; 40(7/8): 975-989.
|
| [16] |
Małkowski P, Ostrowski Ł, Brodny J. Analysis of Young's modulus for Carboniferous sedimentary rocks and its relationship with uniaxial compressive strength using different methods of modulus determination. J Sustain Min. 2018; 17(3): 145-157.
|
| [17] |
Rong H, Li N, Cao C, Wang Y, Li J, Li M. Numerical simulation of blasting behavior of rock mass with cavity under high in-situ stress. Sci Rep. 2024; 14(1):16046.
|
| [18] |
Sazid M, Hussein K, Abudurman K. Rock stress measurement methods in rock mechanics—a brief overview. World J Eng Technol. 2023; 11(2): 252-272.
|
| [19] |
Seaman L, Curran DR, Shockey DA. Computational models for ductile and brittle fracture. J Appl Phys. 1976; 47: 4814-4826.
|
| [20] |
Staat M, Trần N. Strain Based Brittle Failure Criteria for Rocks. Nha xuat ban Khoa hoc tu nhien va Cong nghe (Verlag Naturwissenschaft und Technik); 2022.
|
| [21] |
Warden S, Solovyov Y, Griffiths R, et al. UCS while drilling—Actionable orebody intelligence for mining efficiency improvement. In: 4th AEGC: Geoscience-Breaking New Ground; 2022.
|
| [22] |
Widarsono B, Marsden JR, King MS. In situ stress prediction using differential strain analysis and ultrasonic shear-wave splitting. Geol Soc. 1998; 136: 185-195.
|
| [23] |
Wilkins R, Shwydiuk L. Multi-Sensor Displacement Monitoring at Teck Highland Valley Copper Partnership. SME; 2012.
|
| [24] |
Yang R. A method to calculate the dynamic strain tensor from blast vibration records—theory and measurement error analysis. Blast Fragment. 2012; 6(2): 101-118.
|
| [25] |
Yang R. A multiple blasthole fragmentation model—its concept, formulation, capability and field comparison examples. 11th International Symposium on Rock Fragmentation by Blasting, Sydney, Australia, 24-26 August 2015a.
|
| [26] |
Yang R. A new method to calculate the frequency associated with the peak particle velocity of the vector sum. Blast Fragment. 2015b; 9(1): 41-46.
|
| [27] |
Yang R. Relate peak particle velocity of seismic wave to 3D dynamic strain. Rock Mech Rock Eng. 2016; 50(3): 653-656.
|
| [28] |
Yang R. Modelling VoD and initiation effects on rock fragmentation within multiple blasthole fragmentation (MBF) model. Blast Fragment. 2018; 11(2): 1-14.
|
| [29] |
Yang R. A new method to measure and calculate tri-axial static strain change based on relative displacements between points for rock mass and structure. Rock Mech Rock Eng. 2020; 53(3): 23-30.
|
| [30] |
Yang R. Kinematic approach to blast modelling and new updates of the models. In: Proceedings of the 48th Annual Conference on Explosives and Blasting Technique. International Society of Explosives Engineers; 2022a: 55-63.
|
| [31] |
Yang R. Multiple blasthole dynamic pressure (MBDP) model to alleviate dynamic pressure in blastholes, the European federation of explosive engineers (EFEE).In: 11th World Conference on Explosives and Blasting, MECC Maastricht; 2022b.
|
| [32] |
Yang R. Some Key Concepts Employed for Applied Rock Blast Modelling, Keynote Presentation. In: 13th International Symposium on Rock Fragmentation by Blasting (FRAGBLAST), 2022c.
|
| [33] |
Yang R, Assenso-Onyinah NY. MBF/MSW Implementation Modelling at the Newmont Ahafo Gold Mine (Report to the Newmont Ahafo Gold Mine), Ghana, Africa, 2018.
|
| [34] |
Yang R, Bawden WF, Katsabanis PD. A new constitutive model of blast damage. Inter J Rock Mech Min Sci Geomech Abst. 1996; 33(3): 245-254.
|
| [35] |
Yang R, Green S. Modelling Strains in Production Blasts for Efficiency Improvements. ISEE Savannah Convention Center in Savannah; 2024.
|
| [36] |
Yang R, Green S. Develop strain-based rock failure criteria starting with converting Hoek-Brown criterion into strain failure counterpart. Forthcoming.
|
| [37] |
Yang R, Lownds M. Modelling effect of delay scatter on peak particle velocity of blast vibration using a multiple seed waveform vibration model. Blast Fragment. 2011; 5(1): 31-46.
|
| [38] |
Yang R, McAllister C, Berendzen J, Preece D. Fragmentation modelling using the multiple blasthole fragmentation (MBF) model at an open pit mine. Min Eng. 2016; 68(10): 49-54.
|
| [39] |
Yang R, Patterson N. Case studies using the multiple blasthole fragmentation (MBF) model at open pit mines in Canada. Blast Fragment. 2017; 11(2): 2017.
|
| [40] |
Yang R, Pratt L, Zhao G. A case study on trim blast fragmentation optimization using the MBF model and the MSW blast vibration model at an open pit mine in Canada. Rock Mech Rock Eng. 2023; 56: 3641-3658.
|
| [41] |
Yang R, Proulx R, O'Meara R. Assessment for Highwall Vibration and Combining Trim and Production Blasts at The Kinross Fort Knox Gold Mine, Alaska, USA, 2019.
|
| [42] |
Yang R, Scovira DS. A model of peak amplitude prediction for near field blast vibration based on non-linear charge weight superposition. Time Window Broad Delay Time Model Blast Fragment. 2008; 2(2): 91-116.
|
| [43] |
Yang R, Scovira DS. A model for near and far-field blast vibration based on multiple seed waveforms and transfer functions. Blast Fragment. 2010; 4(2): 91-116.
|
| [44] |
Yang R, Turcotte R. Blast Damage Modelling Using ABAQUS/Explicit, ABAQUS Users' Conference Proceedings; June 1-3; 1994, Newport, Rhode Island, US.
|
| [45] |
Yang RL, Kavetsky A. A three-dimensional model of muckpile formation and grade boundary movement in open pit blasting. Int J Min Geol Eng. 1990; 8: 13-34.
|
| [46] |
Yang RL, Kavetsky A, McKenzie CK. A two-dimensional kinematic model for predicting muckpile shape in bench blasting. Int J Min Geol Eng. 1989; 7: 209-226.
|
RIGHTS & PERMISSIONS
2025 The Author(s). Deep Underground Science and Engineering published by John Wiley & Sons Australia, Ltd on behalf of China University of Mining and Technology.
PDF
(2769KB)
