Photovoltaic Recycled Nano-Silicon–Silica-Based Anode to Enhance Lithium-Ion Battery Performance

Abstract

An economical, sustainable, and industry-acceptable process of utilizing low-value resources to produce highly competitive silicon-based anodes is attractive. In this study, a special anode architecture of PV nano-Si–SiO_x/graphite is developed by utilizing low-value photovoltaic (PV) recycled silicon, which is partially converted to new hybrid PV Si–SiO_x and nano-size simultaneously and wrapped by graphite fragments. An industry-grade ball milling techniques are exploited to assemble this special anode architecture under controlled environment conditions. The attained new PV nano-Si–SiO_x/graphite electrode-incorporated dual binders of carboxymethyl cellulose and poly (acrylic acid) demonstrates high charge capacity and stability (600 mAh g⁻¹ at 0.2 C after 500 cycles; 600 mAh g⁻¹ at 1 C after 100 cycles) as well as commendable Coulombic efficiencies (87% initial and ≥ 99.5% subsequent cycles), providing new opportunities for practical application. The structural analysis reveals that the partial conversion of Si to Si–SiO_x is critical to in situ generate the inert matrix of Li₂O–lithium silicate, which works as a buffer in diminishing the volume variation in the electrode during initial lithiation. Our silicon anode design and subsequent assembly by environmentally friendly processes can potentially be used to produce high-value practical silicon anodes for lithium-ion battery technology.

Keywords

lithium-ion batteries / photovoltaic nano-silicon / photovoltaic recycled silicon / silicon anode design / silicon–silicon oxide anode

References

[1] M. S. Wang, G.-L. Wang, S. Wang, et al., “In Situ Catalytic Growth 3D Multi-Layers Graphene Sheets Coated Nano-Silicon Anode for High Performance Lithium-Ion Batteries,” Chemical Engineering Journal 356 (2019): 895–903.

[2] Y. Xing, L. Zhang, S. Mao, et al., “Core–Shell Structure of Porous Silicon With Nitrogen-Doped Carbon Layer for Lithium-Ion Batteries,” Materials Research Bulletin 108 (2018): 170–175.

[3] A. Tranchot, A. Etiemble, P.-X. Thivel, H. Idrissi, and L. Roué, “In-Situ Acoustic Emission Study of Si-Based Electrodes for Li-Ion Batteries,” Journal of Power Sources 279 (2015): 259–266.

[4] R. E. Ruther, K. A. Hays, S. J. An, J. Li, D. L. Wood, and J. Nanda, “Chemical Evolution in Silicon–Graphite Composite Anodes Investigated by Vibrational Spectroscopy,” ACS Applied Materials & Interfaces 10 (2018): 18641–18649.

[5] M. Wetjen, S. Solchenbach, D. Pritzl, J. Hou, V. Tileli, and H. A. Gasteiger, “Morphological Changes of Silicon Nanoparticles and the Influence of Cutoff Potentials in Silicon–Graphite Electrodes,” Journal of the Electrochemical Society 165 (2018): A1503–A1514.

[6] D. Ma, Z. Cao, and A. Hu, “Si-Based Anode Materials for Li-Ion Batteries: A Mini Review,” Nano-Micro Letters 6 (2014): 347–358.

[7] G. Wu, Y. Gao, Z. Weng, et al., “Binder-Induced Inorganic-Rich Solid Electrolyte Interphase and Physicochemical Dual Cross-Linked Network for High-Performance Sioxanode,” Carbon Neutralization 3 (2024): 857–872.

[8] X. Li, L. Yuan, M. Li, et al., “Ag-Doped Hollow ZIFs-Derived Si@C Composite Based on Waste Silicon for Lithium-Ion Battery Anodes,” Journal of the American Ceramic Society 108 (2025): e20568.

[9] L. Shen, S. Li, Y. Wang, et al., “Upcycling Photovoltaic Silicon Waste Into Cost-Effectiveness Si/C Anode Materials,” Carbon Energy 7 (2025): e70004.

[10] J. Lu, J. Liu, X. Gong, et al., “Upcycling of Photovoltaic Silicon Waste Into Ultrahigh Areal-Loaded Silicon Nanowire Electrodes Through Electrothermal Shock,” Energy Storage Materials 46 (2022): 594–604.

[11] B. Scrosati, J. Hassoun, and Y.-K. Sun, “Lithium-Ion Batteries. A Look Into the Future,” Energy & Environmental Science 4 (2011): 3287–3295.

[12] P. Li, J.-Y. Hwang, and Y.-K. Sun, “Nano/Microstructured Silicon–Graphite Composite Anode for High-Energy-Density Li-Ion Battery,” ACS Nano 13 (2019): 2624–2633.

[13] T. Placke, R. Kloepsch, S. Dühnen, and M. Winter, “Lithium Ion, Lithium Metal, and Alternative Rechargeable Battery Technologies: The Odyssey for High Energy Density,” Journal of Solid State Electrochemistry 21 (2017): 1939–1964.

[14] G. G. Eshetu, H. Zhang, X. Judez, et al., “Production of High-Energy Li-Ion Batteries Comprising Silicon-Containing Anodes and Insertion-Type Cathodes,” Nature Communications 12 (2021): 5459.

[15] P. Li, H. Kim, S.-T. Myung, and Y.-K. Sun, “Diverting Exploration of Silicon Anode Into Practical Way: A Review Focused on Silicon–Graphite Composite for Lithium Ion Batteries,” Energy Storage Materials 35 (2021): 550–576.

[16] S. Zhu, J. Zhou, Y. Guan, et al., “Hierarchical Graphene-Scaffolded Silicon/Graphite Composites as High Performance Anodes for Lithium-Ion Batteries,” Small 14 (2018): 1802457.

[17] L. Zhang, C. Wang, Y. Dou, et al., “A Yolk–Shell Structured Silicon Anode With Superior Conductivity and High Tap Density for Full Lithium-Ion Batteries,” Angewandte Chemie International Edition 58 (2019): 8824–8828.

[18] L. Zhang, R. Rajagopalan, H. Guo, X. Hu, S. Dou, and H. Liu, “A Green and Facile Way to Prepare Granadilla-Like Silicon-Based Anode Materials for Li-Ion Batteries,” Advanced Functional Materials 26 (2016): 440–446.

[19] A. Nelson, S. Mateti, Y. Chen, N. Sharma, Q. Han, and M. M. Rahman, “Creating Value Added Nano Silicon Anodes From End-of-Life Photovoltaic Modules: Recovery, Nano Structuring, and the Impact of Ball Milling and Binder on Its Electrochemical Performance,” Energy Materials 4 (2024): 400064.

[20] H. Shang, Z. Zuo, L. Yu, F. Wang, F. He, and Y. Li, “Low-Temperature Growth of All-Carbon Graphdiyne on a Silicon Anode for High-Performance Lithium-Ion Batteries,” Advanced Materials 30 (2018): 1801459.

[21] W. Deng, Y. L. Wang, W. Guo, et al., “Universal Layer-by-Layer Assembly of Integrated Electrode for High-Rate Lithium-Ion Batteries by Carbon Nanotube Socks,” Carbon 178 (2021): 573–580.

[22] Y. Hu, B. Yu, X. Qi, et al., “The Preparation of Graphite/Silicon@Carbon Composites for Lithium-Ion Batteries Through Molten Salts Electrolysis,” Journal of Materials Science 55 (2020): 10155–10167.

[23] J. Zhang, X. Zhang, C. Zhang, et al., “Facile and Efficient Synthesis of a Microsized SiO_x/C Core–Shell Composite as Anode Material for Lithium Ion Batteries,” Energy & Fuels 31 (2017): 8758–8763.

[24] J. H. Yom, S. W. Hwang, S. M. Cho, and W. Y. Yoon, “Improvement of Irreversible Behavior of SiO Anodes for Lithium Ion Batteries by a Solid State Reaction at High Temperature,” Journal of Power Sources 311 (2016): 159–166.

[25] X. Meng, H. Huo, Z. Cui, X. Guo, and S. Dong, “Influences of Oxygen Content on the Electrochemical Performance of a-SiO_x Thin-Film Anodes,” Electrochimica Acta 283 (2018): 183–189.

[26] Z. Liu, Q. Yu, Y. Zhao, et al., “Silicon Oxides: A Promising Family of Anode Materials for Lithium-Ion Batteries,” Chemical Society Reviews 48 (2019): 285–309.

[27] M. M. Rahman, I. Sultana, T. Yang, et al., “Lithium Germanate (Li₂GeO₃): A High-Performance Anode Material for Lithium-Ion Batteries,” Angewandte Chemie 128 (2016): 16293–16297.

[28] A. C. Ferrari, “Raman Spectroscopy of Graphene and Graphite: Disorder, Electron–Phonon Coupling, Doping and Nonadiabatic Effects,” Solid State Communications 143 (2007): 47–57.

[29] S. Reich and C. Thomsen, “Raman Spectroscopy of Graphite,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 362 (2004): 2271–2288.

[30] K. Uchinokura, T. Sekine, and E. Matsuura, “Raman Scattering by Silicon,” Solid State Communications 11 (1972): 47–49.

[31] S. Yoo, J. Kim, and B. Kang, “Characterizing Local Structure of SiO_x Using Confocal μ-Raman Spectroscopy and Its Effects on Electrochemical Property,” Electrochimica Acta 212 (2016): 68–75.

[32] I. Sultana, M. M. Rahman, T. Ramireddy, Y. Chen, and A. M. Glushenkov, “High Capacity Potassium-Ion Battery Anodes Based on Black Phosphorus,” Journal of Materials Chemistry A 5 (2017): 23506–23512.

[33] Y. Chen, T. Halstead, and J. S. Williams, “Influence of Milling Temperature and Atmosphere on the Synthesis of Iron Nitrides by Ball Milling,” Materials Science and Engineering: A 206 (1996): 24–29.

[34] T. Xing, T. Ramireddy, L. H. Li, et al., “Lithium Storage in Disordered Graphitic Materials: A Semi-Quantitative Study of the Relationship Between Structure Disordering and Capacity,” Physical Chemistry Chemical Physics 17 (2015): 5084–5089.

[35] M. M. Rahman, C. Hou, S. Mateti, et al., “Documenting Capacity and Cyclic Stability Enhancements in Synthetic Graphite Potassium-Ion Battery Anode Material Modified by Low-Energy Liquid Phase Ball Milling,” Journal of Power Sources 476 (2020): 228733.

[36] M. M. Rahman, S. Mateti, I. Sultana, et al., “End-of-Life Photovoltaic Recycled Silicon: A Sustainable Circular Materials Source for Electronic Industries,” Advanced Energy and Sustainability Research 2 (2021): 2100081.

[37] J. Lee, G. Oh, H.-Y. Jung, and J.-Y. Hwang, “Silicon Anode: A Perspective on Fast Charging Lithium-Ion Battery,” Inorganics 11 (2023): 182.

[38] D. Zhuang, Y. Zhang, R. He, et al., “Converting Bulk MoSi₂ Alloy to a SiO_x Based Anode Material Through Controlled Oxidation Induced Sublimation,” Materials Chemistry Frontiers 7 (2023): 3650–3656.

[39] J. Saint, M. Morcrette, D. Larcher, et al., “Towards a Fundamental Understanding of the Improved Electrochemical Performance of Silicon–Carbon Composites,” Advanced Functional Materials 17 (2007): 1765–1774.

[40] V. Ghanooni Ahmadabadi, M. M. Rahman, and Y. Chen, “A Study on High-Rate Performance of Graphite Nanostructures Produced by Ball Milling as Anode for Lithium-Ion Batteries,” Micromachines 14 (2023): 191.

[41] Y. Zhao, Z. Liu, Y. Zhang, et al., “Facile Synthesis of SiO₂@C Nanoparticles Anchored on MWNT as High-Performance Anode Materials for Li-Ion Batteries,” Nanoscale Research Letters 12 (2017): 1–7.

[42] M. Li, Y. Zeng, Y. Ren, et al., “Fabrication and Lithium Storage Performance of Sugar Apple-Shaped SiO_x @C Nanocomposite Spheres,” Journal of Power Sources 288 (2015): 53–61.

[43] J. Ji, H. Ji, L. L. Zhang, et al., “Graphene-Encapsulated Si on Ultrathin-Graphite Foam as Anode for High Capacity Lithium-Ion Batteries,” Advanced Materials 25 (2013): 4673–4677.

[44] R. Mukherjee, R. Krishnan, T.-M. Lu, and N. Koratkar, “Nanostructured Electrodes for High-Power Lithium Ion Batteries,” Nano Energy 1 (2012): 518–533.

[45] M. Jiao, J. Qi, Z. Shi, and C. Wang, “Three-Dimensional Si/Hard-Carbon/Graphene Network as High-Performance Anode Material for Lithium Ion Batteries,” Journal of Materials Science 53 (2018): 2149–2160.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Neutralization published by Wenzhou University and John Wiley & Sons Australia, Ltd.