Synergistic Role of Viscoelasticity and Amphiphilicity in Binder Design for High-Performance Silicon Electrodes

Abstract

Silicon is a promising anode material for lithium-ion batteries because of its high theoretical capacity. However, their practical application is hindered by substantial volume expansion during lithiation/delithiation, which leads to mechanical degradation and capacity fading. To address this challenge, we propose a stress-dissipative binder system based on UV-induced cross-linking of viscoelastic poly(dimethyl siloxane) (PDMS) with rigid linear poly(acrylic acid) (PAA). The resulting PAA–PDMS binder can reversibly deform and recover in response to external stress due to the flexible siloxane backbone in PDMS, thereby accommodating the substantial volume expansion of Si electrode. Furthermore, the amphiphilic nature of the PDMS molecule increases its affinity for both carbon and Si particles, resulting in enhanced mechanical integrity of the Si electrode. These inherent characteristics of PDMS can effectively compensate for the rigidity of PAA, resulting in a well-balanced binder system tailored for Si electrodes. Consequently, the PAA–PDMS electrode exhibited a discharge capacity of 2072.68 mAh g⁻¹ after 100 cycles at 0.5 C−rate, whereas the PAA−based electrode reached failure after only 70 cycles. Post-mortem analyses reveal that the improved electrochemical performance of the PAA–PDMS electrode arises from its ability to mitigate Si electrode degradation by suppressing volume expansion and stabilizing the electrode–electrolyte interface.

Keywords

poly(acrylic acid) / poly(dimethyl siloxane) / silicon anode / UV cross-linked binder / viscoelastic

References

[1] J. W. Choi and D. Aurbach, “Promise and Reality of Post-Lithium-Ion Batteries With High Energy Densities,” Nature Reviews Materials 1 (2016): 16013.

[2] B. L. Ellis, K. T. Lee, and L. F. Nazar, “Positive Electrode Materials for Li-Ion and Li-Batteries,” Chemistry of Materials 22 (2010): 691–714.

[3] H. Ji, J. Wu, Z. Cai, et al., “Ultrahigh Power and Energy Density in Partially Ordered Lithium-Ion Cathode Materials,” Nature Energy 5 (2020): 213–221.

[4] T. Yim, H. J. Ha, M. S. Park, K. J. Kim, J. S. Yu, and Y. J. Kim, “A Facile Method for Construction of a Functionalized Multi-Layered Separator to Enhance Cycle Performance of Lithium Manganese Oxide,” RSC Advances 3, no. 48 (2013): 25657–25661.

[5] S. J. Sim, B. S. Jin, J. H. Park, and H. S. Kim, “A Study on Long-Term Cycling Performance by External Pressure Change for Pouch-Type Lithium Metal Batteries,” Journal of Electrochemical Science and Technology 15, no. 2 (2024): 314–320.

[6] Y. J. Jeon, J. Park, and T. Yim, “Poly(Imide) Separator Functionalized by Melamine Phosphonic Acid for Regulating Structural and Thermal Stabilities of Lithium-Ion Batteries,” Journal of Electrochemical Science and Technology 15, no. 3 (2024): 365–372.

[7] M. S. Park, N. J. Lee, S. W. Lee, K. J. Kim, D. J. Oh, and Y. J. Kim, “High-Energy Redox-Flow Batteries With Hybrid Metal Foam Electrodes,” ACS Applied Materials & Interfaces 6, no. 13 (July 2014): 10729–10735.

[8] S. J. Park, Y. J. Choi, H. Kim, et al., “Stable Immobilization of Lithium Polysulfides Using Three-Dimensional Ordered Mesoporous Mn₂O₃ as the Host Material In Lithium–Sulfur Batteries,” Carbon Energy 6 (2024): e487.

[9] S. J. Park, Y. J. Choi, J. Cheon, et al., “A Sacrificial Separator Facilitating In Situ Creation of a Durable CEI Layer and Tailoring Lithium Dendrites for Practical Lithium Metal Batteries,” Journal of Materials Chemistry A 12 (2024): 11551–11562.

[10] Z. Zhao, F. Chen, J. Han, et al., “Revival of Microparticular Silicon for Superior Lithium Storage,” Advanced Energy Materials 13 (2023): 2300367.

[11] W. Yan, Z. Mu, Z. Wang, et al., “Hard-Carbon-Stabilized Li–Si Anodes for High-Performance All-Solid-State Li-Ion Batteries,” Nature Energy 8 (2023): 800–813.

[12] T. Lee, M. J. Seong, H. C. Ahn, et al., “Fast-Chargeable Lithium-Ion Batteries by μ-Si Anode-Tailored Full-Cell Design,” Proceedings of the National Academy of Sciences of the United States of America 122 (2025): e2417053121.

[13] S. C. Jung, J. W. Choi, and Y. K. Han, “Anisotropic Volume Expansion of Crystalline Silicon During Electrochemical Lithium Insertion: An Atomic Level Rationale,” Nano Letters 12 (2012): 5342–5347.

[14] J. R. Szczech and S. Jin, “Nanostructured Silicon for High Capacity Lithium Battery Anodes,” Energy & Environmental Science 4 (2011): 56–72.

[15] J. H. Yoo, S. J. Park, C. Bak, Y. M. Lee, and K. J. Kim, “Addressing Fundamental Challenges of Si/Gr Electrodes With High Silicon Contents Using Innovative Bilayer Electrode Structure Design,” Small Structures 6 (2025): 2400433.

[16] F. Wu, Y. Dong, Y. Su, et al., “Benchmarking the Effect of Particle Size on Silicon Anode Materials for Lithium-Ion Batteries,” Small 19 (2023): 2301301.

[17] Y. Li, K. Yan, H.-W. Lee, et al., “Growth of Conformal Graphene Cages on Micrometre-Sized Silicon Particles as Stable Battery Anodes,” Nature Energy 1 (2016): 15029.

[18] S. Wu, L. He, Y. Lu, et al., “Volumetric Stress Managements on Silicon Anode of Lithium-Ion Batteries by a Self-Adaptable Binder,” Energy & Environmental Materials 8 (2024): e12859.

[19] Y. Yang, S. Wu, Y. Zhang, et al., “Towards Efficient Binders for Silicon Based Lithium-Ion Battery Anodes,” Chemical Engineering Journal 406 (2021): 126807.

[20] X. Su, Q. Wu, J. Li, et al., “Silicon-Based Nanomaterials for Lithium-Ion Batteries: A Review,” Advanced Energy Materials 4 (2014): 130082.

[21] W. Porcher, S. Chazelle, A. Boulineau, et al., “Understanding Polyacrylic Acid and Lithium Polyacrylate Binder Behavior in Silicon Based Electrodes for Li-Ion Batteries,” Journal of the Electrochemical Society 164 (2017): A3633–A3640.

[22] P. Parikh, M. Sina, A. Banerjee, et al., “Role of Polyacrylic Acid (PAA) Binder on the Solid Electrolyte Interphase in Silicon Anodes,” Chemistry of Materials 31 (2019): 2535–2544.

[23] I. Kovalenko, B. Zdyrko, A. Magasinski, et al., “A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries,” Science 334 (2011): 75–79.

[24] B. Koo, H. Kim, Y. Cho, K. T. Lee, N. S. Choi, and J. Cho, “A Highly Cross-Linked Polymeric Binder for High-Performance Silicon Negative Electrodes in Lithium Ion Batteries,” Angewandte Chemie International Edition 51 (2012): 8762–8767.

[25] C. Wang, H. Wu, Z. Chen, M. T. Mcdowell, Y. Cui, and Z. Bao, “Self-Healing Chemistry Enables the Stable Operation of Silicon Microparticle Anodes for High-Energy Lithium-Ion Batteries,” Nature Chemistry 5 (2013): 1042–1048.

[26] S. Choi, T. Kwon, A. Coskun, and J. W. Choi, “Highly Elastic Binders Integrating Polyrotaxanes for Silicon Microparticle Anodes in Lithium Ion Batteries,” Science 357 (2017): 279–283.

[27] M. G. Nam, J. Moon, M. Kim, et al., “p-Phenylenediamine-Bridged Binder-Electrolyte-Unified Supramolecules for Versatile Lithium Secondary Batteries,” Advanced Materials 36 (2024): 2304803.

[28] B. Sun, X. Jiao, J. Liu, et al., “Neural Network Inspired Binder Enables Fast Li-Ion Transport and High Stress Adaptation for Si Anode,” Nano Letters 24 (2024): 7662–7671.

[29] R. Ariati, F. Sales, A. Souza, R. A. Lima, and J. Ribeiro, “Polydimethylsiloxane Composites Characterization and Its Applications: A Review,” Polymers 13 (2021): 4258.

[30] S. Seethapathy and T. Górecki, “Applications of Polydimethylsiloxane in Analytical Chemistry: A Review,” Analytica Chimica Acta 750 (2012): 48–62.

[31] A. Mata, A. J. Fleischman, and S. Roy, “Characterization of Polydimethylsiloxane (PDMS) Properties for Biomedical Micro/Nanosystems,” Biomedical Microdevices 7 (2005): 281–293.

[32] H. Xu, X. Liu, W. Sun, et al., “A Semi-Fluid Multi-Functional Binder for a High-Performance Silicon Anode of Lithium-Ion Batteries,” Nanoscale 15 (2023): 791–801.

[33] G. T. Kim, G. B. Appetecchi, M. Carewska, et al., “UV Cross-Linked, Lithium-Conducting Ternary Polymer Electrolytes Containing Ionic Liquids,” Journal of Power Sources 195 (2010): 6130–6137.

[34] Y. Yao, H. Tai, D. Wang, Y. Jiang, Z. Yuan, and Y. Zheng, “One-Pot Preparation and Applications of Self-Healing, Self-Adhesive PAA-PDMS Elastomers,” Journal of Semiconductors 40 (2019): 112602.

[35] İ. Uzun, “Methods of Determining the Degree of Crystallinity of Polymers With X-Ray Diffraction: A Review,” Journal of Polymer Research 30 (2023): 394.

[36] S. Sathya, C. Soosaimanickam, F. Bella, D. J. Yoo, and A. M. Stephan, “Cycling Performance of SiOx-Si-C Composite Anode With Different Blend Ratios of PAA-CMC as Binder for Lithium Sulfur Batteries,” Journal of Polymer Research 31 (2024): 205.

[37] H. Stutz, K. H. Illers, and J. Mertes, “A Generalized Theory for the Glass Transition Temperature of Crosslinked and Uncrosslinked Polymers,” Journal of Polymer Science, Part B: Polymer Physics 28 (1990): 1483–1498.

[38] P. González Cortes, R. Araya-Hermosilla, K. Wrighton-Araneda, et al., “Effect of Intermolecular Interactions on the Glass Transition Temperature of Chemically Modified Alternating Polyketones,” Materials Today Chemistry 34 (2023): 101771.

[39] D. Jones, “Dynamic Mechanical Analysis of Polymeric Systems of Pharmaceutical and Biomedical Significance,” International Journal of Pharmaceutics 179 (1999): 167–178.

[40] T. Yim, S. J. Choi, Y. N. Jo, et al., “Effect of Binder Properties on Electrochemical Performance for Silicon-Graphite Anode: Method and Application of Binder Screening,” Electrochimica Acta 136 (2014): 112–120.

[41] Y. Wang, D. Dang, D. Li, J. Hu, and Y. T. Cheng, “Influence of Polymeric Binders on Mechanical Properties and Microstructure Evolution of Silicon Composite Electrodes During Electrochemical Cycling,” Journal of Power Sources 425 (2019): 170–178.

[42] R. Dominko, M. Gaberscek, J. Drofenik, M. Bele, S. Pejovnik, and J. Jamnik, “The Role of Carbon Black Distribution in Cathodes for Li Ion Batteries,” Journal of Power Sources 119–121 (2003): 770–773.

[43] V. Wenzel, H. Nirschl, and D. Nötzel, “Challenges in Lithium-Ion-Battery Slurry Preparation and Potential of Modifying Electrode Structures by Different Mixing Processes,” Energy Technology 3 (2015): 692–698.

[44] H. Ma, M. Wang, J. Hou, X. Wang, P. Sun, and F. Wang, “Strong and Tough Water-Tolerant Conductive Eutectogels With Phase-Separated Hydrophilic/Hydrophobic Dual Ionic Channels,” Advanced Materials 37 (2025): 2500770.

[45] J. Kim, J. Choi, K. Park, et al., “Host–Guest Interlocked Complex Binder for Silicon–Graphite Composite Electrodes in Lithium Ion Batteries,” Advanced Energy Materials 12 (2022): 2103718.

[46] L. Zhang, X. Jiao, Z. Feng, B. Li, Y. Feng, and J. Song, “A Nature-Inspired Binder With Three-Dimensional Cross-Linked Networks for Silicon-Based Anodes in Lithium-Ion Batteries,” Journal of Power Sources 484 (2021): 229198.

[47] S. J. Park, M. J. Hong, Y. J. Ha, J. I. Choi, and K. J. Kim, “Two-In-One Strategy for Optimizing Chemical and Structural Properties of Carbon Felt Electrodes for Vanadium Redox Flow Batteries,” Science and Technology of Advanced Materials 25 (2024): 2327274.

[48] B. Chen, D. Xu, S. Chai, Z. Chang, and A. Pan, “Enhanced Silicon Anodes With Robust SEI Formation Enabled by Functional Conductive Binder,” Advanced Functional Materials 34 (2024): 2401794.

[49] L. Li, T. Li, Y. Sha, B. Ren, L. Zhang, and S. Zhang, “A Web-Like Three-Dimensional Binder for Silicon Anode in Lithium-Ion Batteries,” Energy & Environmental Materials 7 (2024): e12482.

[50] M. Y. Yan, Y. H. Zhu, J. Y. Liang, et al., “Electrochemical Interface Engineering on a Silicon-Based Anode via Fluorinated-Additive-Assisted Interplay With the Electric Double Layer,” Advanced Functional Materials 35 (2025): 2424674.

[51] C. Cao, I. I. Abate, E. Sivonxay, et al., “Solid Electrolyte Interphase on Native Oxide-Terminated Silicon Anodes for Li-Ion Batteries,” Joule 3 (2019): 762–781.

[52] Y. Sohn, J. Oh, J. Lee, et al., “Dual-Seed Strategy for High-Performance Anode-Less All-Solid-State Batteries,” Advanced Materials 36 (2024): 2407443.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Neutralization published by Wenzhou University and John Wiley & Sons Australia, Ltd.