Interphase Synergy Achieving Stable Cycling Performance for Aqueous Zn-MnO₂ Battery

Abstract

The lattice distortion resulting from the Jahn–Teller effect (JTE) at the Mn redox center typically induces irreversible phase transitions and structural degradation, which in turn diminishes the reversible capacity and long-term cycling performance. Here, N-doped carbon quantum dots (N-CDs) grafted to the surface of 3 × 3 tunnel todorokite-type MnO₂ (TMO) nanosheet (abbreviated to TMO@N-CDs) are designed. The adsorption of N-CDs promoted the charge transfer and redistribution between Mn and O and promoted the closer electron cloud overlap between Mn and O, thus enhancing the bonding strength of Mn–O bonds, stabilizing the lattice structure, inhibiting JTE, and realizing reversible H⁺/Zn²⁺ storage. Meanwhile, a significant amount of N-CDs can increase active sites of TMO nanosheet, enhance the binding ability with metal ions, and accelerate the ion diffusion kinetics, thus realizing stable electrochemical performances. The density functional theory (DFT) calculation shows that there is obvious orbital overlap between Mn and O in [MnO6] octahedron, which further quantifies the strong interaction between Mn and O through interphase synergy between N-CDs and TMO. The reversible (de)insertion behavior dominated by H⁺ during charging and discharging was proved by operando XRD and ex-situ SEM. As expected, the obtained TMO@N-CDs cathode exhibits remarkable electrochemical properties in terms of high reversible capacity, good rate performance, and satisfactory cycling stability (after 1000 cycles, the specific capacity remains 96.02%).

Keywords

aqueous zinc-ion batteries / interphase synergy / low-/high-rate cycling / N-doped carbon quantum dots / TMO@N-CDs cathode

References

[1] Y. Zhao, S. Zhang, Y. Zhang, et al., “Vacancy-Rich Al-Doped MnO₂ Cathodes Break the Trade-Off between Kinetics and Stability for High-Performance Aqueous Zn-Ion Batteries,” Energy & Environmental Science 17 (2024): 1279.

[2] Q. Zou, Z. Liang, W. Wang, D. Dong, and Y.-C. Lu, “A Nuclei-Rich Strategy for Highly Reversible Dendrite-Free Zinc Metal Anodes,” Energy & Environmental Science 16 (2023): 6026.

[3] Y. Li, Y. Li, Q. Liu, et al., “Revealing the Dominance of the Dissolution-Deposition Mechanism in Aqueous Zn−MnO₂ Batteries,” Angewandte Chemie International Edition 63 (2024): 2318444.

[4] T. Xue, Y. Mu, X. Wei, et al., “From Fundamentals to Practice: Electrolyte Strategies for Zinc-Ion Batteries in Extreme Temperature,” Carbon Neutralization 4 (2024): e183.

[5] A. Zhang, R. Zhao, Y. Wang, et al., “Hybrid Superlattice-Triggered Selective Proton Grotthuss Intercalation in δ-MnO₂ for High-Performance Zinc-Ion Battery,” Angewandte Chemie International Edition 62 (2023): e202313163.

[6] Y. Tang, J. H. Li, C. L. Xu, M. Liu, B. Xiao, and P. F. Wang, “Electrode/Electrolyte Interfacial Engineering for Aqueous Zn-Ion Batteries,” Carbon Neutralization 2 (2023): 186–212.

[7] B. Xie, Q. Hu, X. Liao, et al., “Multifunctional Electrolyte Toward Long-Life Zinc-Ion Batteries: Synchronous Regulation of Solvation,” Advanced Functional Materials 33 (2023): 2311961.

[8] W. Li and D. Wang, “Conversion-Type Cathode Materials for Aqueous Zn Metal Batteries in Nonalkaline Aqueous Electrolytes: Progress, Challenges, and Solutions,” Advanced Materials 35 (2023): 2304983.

[9] J. Yao, X. Wang, P. Hu, et al., “Local Electron Spin-State Modulation at Mn Site for Advanced Sodium-Ion Batteries With Fast-Kinetic NaNi_0.33Fe_0.33Mn_0.33O₂ Cathode,” Advanced Functional Materials 34 (2024): 2419967.

[10] J. Luan, H. Yuan, J. Liu, and C. Zhong, “Recent Advances on Charge Storage Mechanisms and Optimization Strategies of Mn-Based Cathode in Zinc–Manganese Oxides Batteries,” Energy Storage Materials 66 (2024): 103206.

[11] J. Hao, S. Zhang, H. Wu, L. Yuan, K. Davey, and S.-Z. Qiao, “Advanced Cathodes for Aqueous Zn Batteries Beyond Zn²⁺ Intercalation,” Chemical Society Reviews 53 (2024): 4312–4332.

[12] H. Yao, H. Yu, Y. Zheng, et al., “Pre-Intercalation of Ammonium Ions in Layered δ-MnO₂ Nanosheets for High-Performance Aqueous Zinc-Ion Batteries,” Angewandte Chemie International Edition 62 (2023): e202315257.

[13] S. Cheng, L. Yang, D. Chen, et al., “Phase Evolution of an Alpha MnO₂ -Based Electrode for Pseudo-Capacitors Probed by in Operando Raman Spectroscopy,” Nano Energy 9 (2014): 161–167.

[14] J. Zeng, H. Xie, Z. Liu, X. Liu, G. Zhou, and Y. Jiang, “Oxygen Vacancy Induced MnO₂ Catalysts for Efficient Toluene Catalytic Oxidation,” Catalysis Science & Technology 11 (2021): 6708.

[15] M. Du, K.-D. Du, J.-Z. Guo, et al., “Direct Reuse of Oxide Scrap From Retired Lithium-Ion Batteries: Advanced Cathode Materials for Sodium-Ion Batteries,” Rare Metals 42 (2023): 1603–1613.

[16] C. He, Y. Wang, Z. Li, et al., “Facet Engineered α-MnO(2) for Efficient Catalytic Ozonation of Odor CH(3)SH: Oxygen Vacancy-Induced Active Centers and Catalytic Mechanism,” Environmental Science & Technology 54 (2020): 12771–12783.

[17] N. Sinan and E. Unur, “PEDOT:PSS Enhanced Electrochemical Capacitive Performance of Graphene-Templated δ-MnO₂,” Journal of Electrochemical Science and Technology 11 (2020): 50–59.

[18] Y. He, S. Du, H. Li, Q. Cheng, V. Pavlinek, and P. Saha, “MnO₂/polyaniline Hybrid Nanostructures on Carbon Cloth for Supercapacitor Electrodes,” Journal of Solid State Electrochemistry 20 (2016): 1459–1467.

[19] V. P. Santos, O. S. G. P. Soares, J. J. W. Bakker, et al., “Structural and Chemical Disorder of Cryptomelane Promoted by Alkali Doping: Influence on Catalytic Properties,” Journal of Catalysis 293 (2012): 165–174.

[20] F. Liu, M. Zeng, Y. Li, Y. Yang, M. Mao, and X. Zhao, “UV–Vis–Infrared Light Driven Thermocatalytic Activity of Octahedral Layered Birnessite Nanoflowers Enhanced by a Novel Photoactivation,” Advanced Functional Materials 26 (2016): 4518–4526.

[21] X. Wang, X. Wang, Y. Wang, Q. Zhai, Y. Jiang, and S. Li, “The Protonated 2 × 4 Tunnel Manganese Oxide Nanobelts for High-Efficient Electrochemical Rubidium Enrichment,” Separation and Purification Technology 288 (2022): 120635.

[22] S. Deng, Z. Tie, F. Yue, H. Cao, M. Yao, and Z. Niu, “Rational Design of ZnMn₂O₄ Quantum Dots in a Carbon Framework for Durable Aqueous Zinc-Ion Batteries,” Angewandte Chemie International Edition 61 (2022): 2115877.

[23] F. N. I. Sari, P. R. So, and J. M. Ting, “MnO₂ With Controlled Phase for Use in Supercapacitors,” Journal of the American Ceramic Society 100 (2017): 1642–1652.

[24] N. An, J. Xin, W. Li, et al., “3D Binder-Free Conjugated Microporous Polymer Carbon Aerogels@MnO₂ Cathode for High-Performance Aqueous Zinc Ion Batteries,” Applied Surface Science 599 (2022): 153881.

[25] H. Jia, Y. Li, U. Ali, et al., “High-Entropy Doping Strategy Towards Reinforced Mn-O Bond for Durable Aqueous Zinc Ion Batteries,” Nano Energy 122 (2024): 109348.

[26] L. He, X. Ge, X. Wang, J. Fang, Y. Lai, and Z. Zhang, “Bond Structure Engineering Induced the Mn Redox Stabilization Toward High-Energy Mn-Based Phosphate Cathode,” Advanced Functional Materials 34 (2024): 2406488.

[27] M. Wang, C. Cao, F. Su, et al., “The Electrochemical Properties and Reaction Mechanism of Orthorhombic Mn₂SiO₄ Cathode for Aqueous Rechargeable Zinc Ion Batteries,” Journal of Power Sources 477 (2020): 229013.

[28] S. Min and Y. Kim, “Adsorption Characteristics of Cs and Cation Selectivity of Todorokite,” Colloids and Surfaces, A: Physicochemical and Engineering Aspects 650 (2022): 129652.

[29] L. Ding, L. Wang, J. Gao, et al., “Facile Zn²⁺ Desolvation Enabled by Local Coordination Engineering for Long-Cycling Aqueous Zinc-Ion Batteries,” Advanced Functional Materials 33 (2023): 2301648.

[30] Z.-Y. Gu, X.-T. Wang, X.-X. Zhao, et al., “Advanced K₃V₂(PO₄)₂O₂F Cathode for Rechargeable Potassium-Ion Batteries With High Energy Density,” Applied Physics Letters 124 (2024): 183904.

[31] Y. Ma, M. Xu, R. Liu, et al., “Molecular Tailoring of MnO₂ by Bismuth Doping to Achieve Aqueous Zinc-Ion Battery With Capacitor-Level Durability,” Energy Storage Materials 48 (2022): 212–222.

[32] Q. Zhao, X. Huang, M. Zhou, et al., “Proton Insertion Promoted a Polyfurfural/MnO(2) Nanocomposite Cathode for a Rechargeable Aqueous Zn-MnO(2) Battery,” ACS Applied Materials & Interfaces 12 (2020): 36072–36081.

[33] J. Wang, J.-G. Wang, H. Liu, C. Wei, and F. Kang, “Zinc Ion Stabilized MnO₂ Nanospheres for High Capacity and Long Lifespan Aqueous Zinc-Ion Batteries,” Journal of Materials Chemistry A 7 (2019): 13727–13735.

[34] Y. Kim, Y. Park, M. Kim, J. Lee, K. J. Kim, and J. W. Choi, “Corrosion as the Origin of Limited Lifetime of Vanadium Oxide-Based Aqueous Zinc Ion Batteries,” Nature Communications 13 (2022): 29987-x.

[35] R. Sun, P. Xia, X. Guo, et al., “Ternary Zn₃V₃O₈ Superstructure and Synergistic Modification of Separator Promote High Performance and Stable Zinc Ion Battery,” Chemical Engineering Journal 486 (2024): 150377.

[36] K. Han, Z. Wang, F. An, et al., “Boosting Aqueous Zn/MnO₂ Batteries via a Synergy of Edge/Defect-Rich Cathode and Dendrite-Free Anode,” ACS Applied Materials & Interfaces 14 (2022): 4316–4325.

[37] J. Huang, Z. Wang, M. Hou, et al., “Polyaniline-Intercalated Manganese Dioxide Nanolayers as a High-Performance Cathode Material for an Aqueous Zinc-Ion Battery,” Nature Communications 9 (2018): 2906.

[38] C. Guo, H. Liu, J. Li, et al., “Ultrathin δ-MnO₂ Nanosheets as Cathode for Aqueous Rechargeable Zinc Ion Battery,” Electrochimica Acta 304 (2019): 370–377.

[39] Q. Zhao, A. Song, W. Zhao, et al., “Boosting the Energy Density of Aqueous Batteries via Facile Grotthuss Proton Transport,” Angewandte Chemie International Edition 60 (2020): 4169–4174.

[40] S. Bi, H. Wang, Y. Zhang, et al., “Six-Electron-Redox Iodine Electrodes for High-Energy Aqueous Batteries,” Angewandte Chemie International Edition 62 (2023): 2312982.

[41] X. Shi, X. Liu, E. Wang, et al., “Boosting the Zn Ion Storage Ability of Amorphous MnO₂ via Surface Engineering and Valence Modulation,” Carbon Neutralization 2 (2022): 28–36.

[42] T. Zhang, Y. Tang, G. Fang, et al., “Electrochemical Activation of Manganese-Based Cathode in Aqueous Zinc-Ion Electrolyte,” Advanced Functional Materials 30 (2020): 2002711.

[43] J. Huang, X. Xie, K. Liu, S. Liang, and G. Fang, “Perspectives in Electrochemical In Situ Structural Reconstruction of Cathode Materials for Multivalent-Ion Storage,” Energy & Environmental Materials 6 (2022): e12309.

[44] H. Tu, Y. Zhang, J. Wu, et al., “Revealing Electrochemical Process of Functional Carbon Dots Stabilized Sodium Metal Anode: Co-Deposition and Strengthened SEI Films,” Advanced Functional Materials 34 (2024): 2413488.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Neutralization published by Wenzhou University and John Wiley & Sons Australia, Ltd.