Mar 2016, Volume 17 Issue 03
    

  • Select all
  • Wei ZHANG,You-de HU,Li-rong ZHENG
    2016, 17(03): 258-264. https://doi.org/10.1631/FITEE.1500210

    A standing wave oscillator (SWO) is a perfect clock source which can be used to produce a high frequency clock signal with a low skew and high reliability. However, it is difficult to tune the SWO in a wide range of frequencies. We introduce a frequency tunable SWO which uses an inversion mode metal-oxide-semiconductor (IMOS) field-effect transistor as a varactor, and give the simulation results of the frequency tuning range and power dissipation. Based on the frequency tunable SWO, a new phase locked loop (PLL) architecture is presented. This PLL can be used not only as a clock source, but also as a clock distribution network to provide high quality clock signals. The PLL achieves an approximately 50% frequency tuning range when designed in Global Foundry 65 nm 1P9M complementary metal-oxide-semiconductor (CMOS) technology, and can be used directly in a high performance multi-core microprocessor.

  • Jin WANG,Feng SHU,Ri-qing CHEN,Yu-di CUI,Yu CHEN,Jun LI
    2016, 17(03): 265-280. https://doi.org/10.1631/FITEE.1500134

    In wideband multi-pair two-way relay networks, the performance of beamforming at a relay station (RS) is intimately related to the accuracy of the channel state information (CSI) available. The accuracy of CSI is determined by Doppler spread, delay between beamforming and channel estimation, and density of pilot symbols, including transmit power of pilot symbols. The coefficient of the Gaussian-Markov CSI error model is modeled as a function of CSI delay, Doppler spread, and signal-to-noise ratio, and can be estimated in real time. In accordance with the real-time estimated coefficients of the error model, an adaptive robust maximum signal-to-interferenceand- noise ratio (Max-SINR) plus maximum signal-to-leakage-and-noise ratio (Max-SLNR) beamformer at an RS is proposed to track the variation of the CSI error. From simulation results and analysis, it is shown that: compared to existing non-adaptive beamformers, the proposed adaptive beamformer is more robust and performs much better in the sense of bit error rate (BER); with increase in the density of transmit pilot symbols, its BER and sum-rate performances tend to those of the beamformer of Max-SINR plus Max-SLNR with ideal CSI.