Intercalation of chitosan into montmorillonite nanocomposites with experimental and molecular dynamics study toward sustainable functional materials

Abstract

The growing demand for sustainable and functional nanocomposites in biomedicine and environmental remediation motivates this study on the structural and thermal evolution of chitosan–montmorillonite systems. Using a combined experimental–computational approach, nanocomposites were synthesized at pH = 4.1 with varying chitosan-to-clay ratios and systematically characterized. X-ray diffraction revealed an expansion of basal spacing from 12.0 Å (pure montmorillonite) to 20.3 Å at the highest chitosan content, aligning with theoretical predictions (19.18 Å) for monolayer and bilayer intercalation. FTIR spectra confirmed strong hydrogen bonding and electrostatic interactions between chitosan and clay layers. Thermogravimetric analysis indicated a slight decrease in decomposition temperature (198 → 182–186 °C) but improved overall thermal stability, evidenced by reduced mass loss and higher residual content. Molecular dynamics simulations further elucidated intercalation mechanisms, with a 5.06% theoretical deviation for bilayer formation and RDF peaks at 1 Å (53.4 Å for monolayer and 68.7 Å for bilayer), highlighting stabilizing molecular forces. These findings establish a predictive framework for tailoring chitosan–montmorillonite nanocomposites with enhanced structural and thermal performance, underscoring their promise for sustainable applications such as food packaging and edible films.

Keywords

Montmorillonite / Chitosan / Molecular dynamics / Intercalation

Declaration of Competing Interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

CRediT authorship contribution statement

Amina Amrani: Writing – original draft, Investigation, Formal analysis, Conceptualization. Mohammed Elkabous: Methodology, Investigation, Formal analysis, Conceptualization. Kamal Essifi: Validation, Software, Formal analysis. Dounia Azerkane: Visualization, Software. Yasser Karzazi: Visualization, Validation, Supervision. Elkhadir Gharibi: Visualization, Validation, Supervision. Sandrine Delpeux Ouldriane: Visualization, Validation. Abdesselam Tahani: Supervision, Resources, Project administration, Funding acquisition, Conceptualization.

Acknowledgements

The authors gratefully acknowledge the financial support provided by Mohamed First University. They also extend their sincere thanks to Professor Abdelmonaem Talhaoui, Head of the Department of Chemistry, for providing the analytical platform essential to this research.

References

[1] D.R. Paul, L.M. Robeson, Polymer nanotechnology: Nanocomposites, Polymer 49 (2008) 3187-3204, doi: 10.1016/j.polymer.2008.04.017.

[2] V.K. Thammannagowda, K.G.G. Shivanna, S.A. Shankaregowda, S. Panier, P. Kalappa, Poly(butylene adipate-co-terephthalate) (PBAT)/AgFe₂O₄ biopolymer nanocomposite-based flexible triboelectric nanogenerator as a self-powered touch sensor , Express Polym. Lett. 19 (2025) 670-685, doi: 10.3144/EXPRESSPOLYM-LETT.2025.51.

[3] S. Pavlidou, C.D. Papaspyrides, A review on polymer-layered silicate nanocomposites, Prog. Polym. Sci. 33 (2008) 1119-1198, doi: 10.1016/j.progpolymsci.2008.07.008.

[4] A.K. Parameshwarappa, N.Y. Puttaswamy, V.K. Thammannagowda, K.G.G. Shivanna, A.S. Manchaiah, V.M. Yomakeshaiah, A. Krishnappa, P. Kalappa, Poly(lactic acid)/poly(butylene adipate-co-terephthalate) blends compatibilized with epoxidized linseed oil for biomedical applications, Polym. Compos. 33 (2025), doi: 10.1177/09673911251357387.

[5] K.P. Ajeya, Y.P. Naveen, K.T. Vishnu, G.S.K. Gowda, S.M. Anush, K. Amita, K. Prashantha, Development of toughened poly (lactic acid) by melt blending with poly (butylene adipate-co-terephthalate) using epoxidized castor oil as a compatibilizer for biomedical applications, Biomed. Mater. Devices 4 (2025) 672-682, doi: 10.1007/S44174-025-00308-2/METRICS.

[6] K.G. Guddenahalli Shivanna, V.K. Thammannagowda, S.A. Shankaregowda, S. Panier, P. Kalappa, Poly (lactic acid)-based triboelectric nanogenerators: Pathways toward sustainable energy harvesting, Hybrid Adv. 9 (2025) 100395, doi: 10.1016/J.HYBADV.2025.100395.

[7] H.M.C. de Azeredo, Nanocomposites for food packaging applications, Food Res. Int. 42 (2009) 1240-1253, doi: 10.1016/j.foodres.2009.03.019.

[8] K.G.G. Shivanna, V.K. Thammannagowda, P. Hanumesh, P. Kalappa, Multifunctional hydrothermally synthesized MgFe₂O₄-Ag₂WO₄ nanocomposite for enhanced photocatalytic and antibacterial applications , Chem. Phys. Lett. 877 (2025) 142265, doi: 10.1016/J.CPLETT.2025.142265.

[9] D. Krajišnik, S. Uskoković-Marković, A. Daković, Chitosan-clay mineral nanocomposites with antibacterial activity for biomedical application: Advantages and future perspectives, Int. J. Mol. Sci. 25 (2024) 10377, doi: 10.3390/IJMS251910377.

[10] W. Wang, C. Xue, X. Mao, Chitosan: Structural modification, biological activity and application, Int. J. Biol. Macromol. 164 (2020) 4532-4546, doi: 10.1016/j.ijbiomac.2020.09.042.

[11] M. Azmana, S. Mahmood, A.R. Hilles, A. Rahman, M.A. Bin Arifin, S. Ahmed, A review on chitosan and chitosan-based bionanocomposites: Promising material for combatting global issues and its applications, Int. J. Biol. Macromol. 185 (2021) 832-848, doi: 10.1016/j.ijbiomac.2021.07.023.

[12] Z. Dou, X. Xie, Chitosan-montmorillonite-Fe nanocomposite hydrogel for phosphate recovery and reuse, ACS EST Eng. 3 (2023) 682-689, doi: 10.1021/ACSESTENGG.2C00390.

[13] R. Wang, H. Li, G. Ge, N. Dai, J. Rao, H. Ran, Y. Zhang, Montmorillonite-based two-dimensional nanocomposites: Preparation and applications, Molecules 26 (2021), doi: 10.3390/molecules26092521.

[14] S.F. Wang, L. Shen, Y.J. Tong, L. Chen, I.Y. Phang, P.Q. Lim, T.X. Liu, Biopolymer chitosan/montmorillonite nanocomposites: Preparation and characterization, Polym. Degrad. Stab. 90 (2005) 123-131, doi: 10.1016/j.polymdegradstab.2005.03.001.

[15] F. Guo, S. Aryana, Y. Han, Y. Jiao, A review of the synthesis and applications of polymer-nanoclay composites, Appl. Sci. 8 (2018), doi: 10.3390/app8091696.

[16] H. Baniasadi, A. Ramazani, S.Javan Nikkhah, Investigation of in situ prepared polypropylene/clay nanocomposites properties and comparing to melt blending method, Mater. Des. 31 (2010) 76-84, doi: 10.1016/j.matdes.2009.07.014.

[17] E. Guibal, Interactions of metal ions with chitosan-based sorbents: A review, Sep. Purif. Technol. 38 (2004) 43-74, doi: 10.1016/j.seppur.2003.10.004.

[18] E. Ruiz-Hitzky, C. Ruiz-Garcia, X. Wang, MXenes and clay minerals in the framework of the 2D organic-inorganic hybrid nanomaterials, Chem. Mater. 35 (2023) 10295-10315, doi: 10.1021/acs.chemmater.3c01759.

[19] Y. Qu, L. Lin, S. Gao, Y. Yang, H. Huang, X. Li, H. Ren, W. Luo, A molecular dynamics study on adsorption mechanisms of polar, cationic, and anionic polymers on montmorillonite, RSC Adv. 13 (2023) 2010-2023, doi: 10.1039/D2RA07341B.

[20] J.L. Suter, D. Groen, P.V. Coveney, Chemically specific multiscale modeling of clay-polymer nanocomposites reveals intercalation dynamics, tactoid self-assembly and emergent materials properties, Adv. Mater. 27 (2015) 966-984, doi: 10.1002/adma.201403361.

[21] J. Mijović, H.K. Lee, J. Kenny, J. Mays, Dynamics in polymer-silicate nanocomposites as studied by dielectric relaxation spectroscopy and dynamic mechanical spectroscopy, Macromolecules 39 (2006) 2172-2182, doi: 10.1021/ma051995e.

[22] A. Sharma, S. Payne, K.S. Katti, D.R. Katti, Evaluating molecular interactions in polycaprolactone-biomineralized hydroxyapatite nanocomposites using steered molecular dynamics, JOM 67 (2015) 733-743, doi: 10.1007/s11837-015-1361-4.

[23] Y. Wang, J. Wohlert, L.A. Berglund, Y. Tu, H. Ågren, Molecular dynamics simulation of strong interaction mechanisms at wet interfaces in clay-polysaccharide nanocomposites, J. Mater. Chem. A Mater. 2 (2014) 9541-9547, doi: 10.1039/c4ta01459f.

[24] W.H. Bragg, W.L. Bragg, The reflection of X-rays by crystals, Proc. R. Soc. Lond. A 88 (1913) 428-438, doi: 10.1098/RSPA.1913.0040.

[25] R. Yuan, W.M. Wang, Y. He, Y. Fang, X.L. Huang, Molecular dynamics modelling of Na-montmorillonite subjected to uniaxial compression and unidirectional shearing, Clay Miner. 57 (2022) 241-252, doi: 10.1180/CLM.2022.42.

[26] S. Kim, J. Chen, T. Cheng, A. Gindulyte, J. He, S. He, Q. Li, B.A. Shoemaker, P.A. Thiessen, B. Yu, L. Zaslavsky, J. Zhang, E.E. Bolton, PubChem 2023 update, Nucleic Acids Res. 51 (2023) D1373-D1380, doi: 10.1093/NAR/GKAC956.

[27] H. Sun, COMPASS: an ab initio force-field optimized for condensed-phase applications overview with details on alkane and benzene compounds, J. Phys. Chem. B 102 (1998) 7338-7364, doi: 10.1021/JP980939V.

[28] M. Elkabous, Y. Karzazi, Theoretical study of new 3-(methylthio)-8-phenyl-8H-thieno[2,3-b]indole derivatives for application in DSSC: Solvent effect, adsorption process on the surface of TiO₂ , Arab. J. Chem. 17 (2024) 105457, doi: 10.1016/J.ARABJC.2023.105457.

[29] M. Elkabous, M. Ouachekradi, Y. Karzazi, Computational analysis of charge transfer and optoelectronic properties in triphenylamine-based molecules for high-efficiency organic solar cells, ChemPhysMater (2025), doi: 10.1016/J.CHPHMA.2025.08.003.

[30] M. El Miz, H. Akichoh, D. Berraaouan, S. Salhi, A. Tahani, Chemical and physical characterization of moroccan bentonite taken from Nador (north of Morocco), Am. J. Chem. 7 (2017) 105-112, doi: 10.5923/j.chemistry.20170704.01.

[31] R. Wang, H. Li, G. Ge, N. Dai, J. Rao, H. Ran, Y. Zhang, Montmorillonite-based two-dimensional nanocomposites: Preparation and applications, Molecules 26 (2021) 2521, doi: 10.3390/molecules26092521.

[32] M. Segad, B. Jönsson, T. Åkesson, B. Cabane, Ca/Na montmorillonite: Structure, forces and swelling properties, Langmuir 26 (2010) 5782-5790, doi: 10.1021/la9036293.

[33] A.C.S. Alcântara, M. Darder, P. Aranda, E. Ruiz-Hitzky, Polysaccharide-fibrous clay bionanocomposites, Appl. Clay Sci. 96 (2014) 2-8, doi: 10.1016/j.clay.2014.02.018.

[34] A. Abarkan, N. Achalhi, R. El Yousfi, S. Moumnassi, Z. Aissaoui, A. Asehraou, A. El Idrissi, State-of-the-art phosphorylation of water-soluble allyl cellulose via a green radical-mediated “click” reaction pathway with enhanced antifungal activity, Carbohydr. Polym. 349 (2025) 123014, doi: 10.1016/j.carbpol.2024.123014.

[35] C. Branca, G. D’Angelo, C. Crupi, K. Khouzami, S. Rifici, G. Ruello, U. Wanderlingh, Role of the OH and NH vibrational groups in polysaccharide-nanocomposite interactions: A FTIR-ATR study on chitosan and chitosan/clay films, Polymer 99 (2016) 614-622, doi: 10.1016/j.polymer.2016.07.086.

[36] K. Lewandowska, A. Sionkowska, G. Furtos, S. Grabska, M. Michalska, Structure and interactions in chitosan composites, Key Eng. Mater. 672 (2015) 257-260, doi: 10.4028/www.scientific.net/KEM.672.257.

[37] A. Leszczyńska, J. Njuguna, K. Pielichowski, J.R. Banerjee, Polymer/montmorillonite nanocomposites with improved thermal properties. Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement, Thermochim. Acta 453 (2007) 75-96, doi: 10.1016/j.tca.2006.11.002.

[38] K. Majeed, A. Ahmed, M.S. Abu Bakar, T.M.I. Mahlia, N. Saba, A. Hassan, M. Jawaid, M. Hussain, J. Iqbal, Z. Ali, Mechanical and thermal properties of montmorillonite-reinforced polypropylene/rice husk hybrid nanocomposites, Polymers 11 (2019) 1557, doi: 10.3390/polym11101557.

[39] A. Smitha Alex, R.S. Rajeev, K. Krishnaraj, N. Sreenivas, S.K. Manu, C. Gouri, V. Sekkar, Thermal protection characteristics of polydimethylsiloxane-organoclay nanocomposite, Polym. Degrad. Stab. 144 (2017) 281-291, doi: 10.1016/J.POLYMDEGRADSTAB.2017.08.026.

[40] S. Ghazanfari, A. Alesadi, Y. Liao, Y. Zhang, W. Xia, Molecular insights into the temperature and pressure dependence of mechanical behavior and dynamics of Na-montmorillonite clay, Nanoscale Adv. 5 (2023) 5449-5459, doi: 10.1039/D3NA00365E.