Strontium encapsulated molybdenum diselenide as an enhanced electron transport layer for high efficiency perovskite solar cells

Abstract

Perovskite solar cells (PSCs) have emerged as a transformative technology in photovoltaics due to their high absorption coefficient and potential for low-cost, high-efficiency solar energy conversion. Optimizing the electron transport layer (ETL) remains a critical challenge, as it significantly influences charge carrier dynamics and overall device performance. This study explores strontium (Sr) doped hydrothermally synthesized molybdenum diselenide (MoSe₂) as ETL to enhance the power conversation efficiency (PCE) of the PSCs. The encapsulation of Sr within MoSe₂ (Sr@MoSe₂) demonstrates a notable enhancement in photovoltaic parameters, achieving a short-circuit current density ( J_sc) of 13.73 mA/cm², an open-circuit voltage ( V_oc) of 1.04 V, a fill factor (FF) of 82%, and a power conversion efficiency (PCE) of 10.12%, compared to pristine MoSe₂ ( J_sc = 11.05 mA/cm², V_oc = 1.03 V, FF = 70%, PCE = 7.97%). Transient photovoltage and impedance spectroscopy analysis confirm that Sr modification facilitates improved charge extraction and reduces recombination losses at the ETL perovskite interface. These results underscore the effectiveness of Sr incorporation in enhancing both the efficiency and operational stability of perovskite solar cells. This work not only provides a promising strategy for ETL optimization but also opens avenues for future research into tailored material engineering for next-generation photovoltaic devices.

Keywords

Perovskite solar cells / Electron transport layer / Strontium / Molybdenum diselenide / Power conversion efficiency

Declaration of Competing Interest

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

CRediT authorship contribution statement

B.A. Anandh: Writing – original draft. A. Shankar Ganesh: Methodology. P. Nandakumar: Resources. D. Saranya: Visualization.

References

[1] T. Seyisi, B.G. Fouda-Mbanga, J.I. Mnyango, Y.B. Nthwane, B. Nyoni, S. Mhlanga, S.P. Hlangothi, Z.Tywabi Ngeva, Major challenges for commercialization of perovskite solar cells: A critical review, Energy Rep. 13 (2025) 1400-1415, doi: 10.1016/j.egyr.2025.01.019.

[2] J.W. Tan, S.L. Tong, T. Zhou, J. Lin, Y.S. Liu, Research and development of modification strategies based on all inorganic perovskite solar cells, Nano Energy 138 (2025) 110815, doi: 10.1016/j.nanoen.2025.110815.

[3] C.Y. Shi, N.X. Gu, Z.Y. Sun, J. Xiong, P.F. Du, L.X. Song, Interface engineering for efficient ETL-free perovskite solar cells via self-assembled bifunctional monolayer, Appl. Surf. Sci. 684 (2025) 161950, doi: 10.1016/j.apsusc.2024.161950.

[4] N.K. Sinha, P. Roy, D.S. Ghosh, A. Khare, Performance optimization of ETL-free bifacial perovskite solar cells for flexible devices: A simulation study, Next Energy 4 (2024) 100143, doi: 10.1016/j.nxener.2024.100143.

[5] A. Raj, M. Kumar, D.V. Singh, A. Anshul, A critical review on transition metal dichalcogenides (TMDs): An efficiency booster for perovskite solar cells, Flat. Chem. 44 (2024) 100629, doi: 10.1016/j.flatc.2024.100629.

[6] V. Vanathi, M. Sathishkumar, S. Kannan, A. Balamurugan, Optimisation of MoSe₂ synthesis for enhanced electron transport layer performance in perovskite solar cells , Mater. Lett. 355 (2024) 135550, doi: 10.1016/j.matlet.2023.135550.

[7] A. Ghosh, A.A. Hassan, H.A. Alrafai, S.K.A. Abdelrahim, A comprehensive study on electron and hole transport layers for designing and optimizing the efficiency of MoSe₂ based solar cells using numerical simulation techniques , Heliyon 10 (2024) e35061, doi: 10.1016/j.heliyon.2024.e35061.

[8] G.Q. Wang, Z.M. Guo, C. Chen, W.L. Yu, B. Xu, B. Lin, Exploring a high-carrier-mobility black phosphorus/MoSe₂ heterostructure for high-efficiency thin film solar cells , Sol. Energy. 236 (2022) 576-585, doi: 10.1016/j.solener.2022.03.008.

[9] K. Ahmad, R.A.Khan Abdullah, H.K. Seo, T.H. Oh, Fabrication of lead halide perovskite solar cells with improved photovoltaic performance using MoSe₂ additive strategies , Opt. Mater. 157 (2024) 116382, doi: 10.1016/j.optmat.2024.116382.

[10] M. Sathishkumar, T. Dhanalakshmi, S.Esath Natheer, A. Balamurugan, S. Kannan, Fabrication of novel SrMoSe₂ photocatalysts for enhanced oxytetracycline degradation , J. Mol. Struct. 1280 (2023) 135027, doi: 10.1016/j.molstruc.2023.135027.

[11] M. Sakthivel, R. Sukanya, S.M. Chen, B. Dinesh, Synthesis of two-dimensional Sr-doped MoSe₂ nanosheets and their application for efficient electrochemical reduction of metronidazole , J. Phy. Chem. C 122 (2018) 12474-12484, doi: 10.1021/acs.jpcc.8b02188.

[12] M. Szkoda, A. Ilnicka, Enhanced electrochemical capacitance of TiO₂ nanotubes/MoSe₂ composite obtained by hydrothermal route , Appl. Surf. Sci. 681 (2025) 161490, doi: 10.1016/j.apsusc.2024.161490.

[13] N. Dogra, P. Agrawal, S. Pathak, R. Saini, S. Sharma, Hydrothermally synthesized MoSe₂/ZnO composite with enhanced hydrogen evolution reaction , Int. J. Hydrog. Energy. 48 (2023) 26210-26220, doi: 10.1016/j.ijhydene.2023.03.352.

[14] V. Salarvand, M.A. Mohammadi, A. Yousefifar, M.S. Yazdi, A. Mostafaei, Facile hydrothermal synthesis of combined MoSe₂ PS nanostructures on nickel foam with superior electrocatalytic properties for hydrogen evolution reaction , Int. J. Hydrog. Energy. 48 (2023) 10038-10050, doi: 10.1016/j.ijhydene.2022.11.231.

[15] V. Vanathi, M. Sathishkumar, S. Kannan, A. Balamurugan, Enhanced hydrogen evolution performance of MoSe₂ photocatalysts synthesized by hydrothermal and ultrasonic methods , Mater. Lett. 356 (2024) 135595, doi: 10.1016/j.matlet.2023.135595.

[16] Z.W. Wu, S.Y. Sang, J.J. Zheng, Q. Gao, B. Huang, F. Li, K. Sun, S.S. Chen, Crystallization kinetics of hybrid perovskite solar cells, Angew. Chem. Int. Ed. 63 (2024) e202319170, doi: 10.1002/anie.202319170.

[17] V. Singh, D.J. Late, A. Goyal, S. Rath, Raman spectroscopic investigations of the selenization of MoO₃ in the chemical vapor deposition process to form two-dimensional MoSe₂ , Appl. Surf. Sci. 538 (2021) 147946, doi: 10.1016/j.apsusc.2020.147946.

[18] C.T. Wu, S.Y. Hu, K.K. Tiong, Y.C. Lee, Anisotropic effects in the Raman scattering of re-doped 2H-MoSe₂ layered semiconductors , Results Phys. 7 (2017) 4096-4100, doi: 10.1016/j.rinp.2017.10.033.

[19] M.Q. Jiang, K. Zheng, G.P. Chen, Z.H. Yang, L. Xiong, Y.Q. Hu, F. Miao, 3D/2D lead-free halide perovskite CsSnBr₃/MoX (X = Se₂, SSe, S₂) heterostructures for high-efficiency solar cell: Interface engineering strategies and transition of band alignments , Appl. Surf. Sci. 680 (2025) 161448, doi: 10.1016/j.apsusc.2024.161448.

[20] P. Roy, A.Ul-Hamid Saifullah, M.R. Islam, Improved photocatalytic performance by interface functionalized defect-mediated V₂O₅ incorporated MoSe₂ nanoflowers , Surf. Interfaces. 59 (2025) 105929, doi: 10.1016/j.surfin.2025.105929.

[21] L.S. Huang, H.G. Gu, M.S. Fang, S.Y. Liu, Substrate-tuned dielectric screening effect on optical properties of monolayer MoSe₂ , Appl. Surf. Sci. 644 (2024) 158748, doi: 10.1016/j.apsusc.2023.158748.

[22] Y. Xie, N.N. Jiang, W. Han, S.F. Wang, L.Y. Chen, X.W. Jin, Z.Y. Chen, X.S. Xiao, Z.X. Zhou, Y.L. Song, Electric field tunable electronic structures and ultrahigh power conversion efficiency of BC₆N/MoSe₂ van der Waals heterostructure: A promising material for high-efficiency solar cell applications , J. Phys. Chem. Solids 192 (2024) 112067, doi: 10.1016/j.jpcs.2024.112067.

[23] Z.G. Yuan, X. Sun, B. Gao, Z.G. Fan, P.X. Yang, Z.B. Feng, Regulating the electronic structure of Ni₃Se₄-MoSe₂ by coupling with ZIF-derived Co@C promotes boosted urea-assisted water splitting at industrial current density , Chem. Eng. J. 499 (2024) 156647, doi: 10.1016/j.cej.2024.156647.

[24] S.Y. Qin, J.P. Sun, X.C. Meng, Modulating the electronic structure at the interface of CoSe and MoSe₂ for enhanced electrocatalytic hydrogen evolution reaction , Int. J. Hydrog. Energy. 51 (2024) 415-422, doi: 10.1016/j.ijhydene.2023.10.070.

[25] J. Guo, J. Yang, J.P. Guan, X.H. Chen, Y. Zhu, H. Fu, Q. Liu, B. Wei, H.B. Geng, Interface and electronic structure dual-engineering on MoSe₂ with multi-ion/electron transportation channels for boosted sodium-ion half/full batteries , Chem. Eng. J. 450 (2022) 138007, doi: 10.1016/j.cej.2022.138007.

[26] R. Layek, K. Mondal, S. Karmakar, R. Sarkar, D. Chattopadhyay, P. Kumbhakar, Synergistic effect in chemically synthesized noble metal nanoparticles and 2D MoSe₂ nanocomposite for enhanced electrochemical performance , Mater. Today Commun. 38 (2024) 108342, doi: 10.1016/j.mtcomm.2024.108342.

[27] X. Li, S. Aftab, H.L. Liu, D. Vikraman, S. Hussain, J.W. Kang, A.A. Al-Kahtani, Enhancing perovskite solar cells and X-ray photodetectors with hybrid MoSe₂@CNT composites: A path to improved efficiency and sensitivity , J. Power Sources 624 (2024) 235588, doi: 10.1016/j.jpowsour.2024.235588.

[28] M. Theelen, R.J.P. Broos, A. Hovestad, The influence of atmospheric species on the degradation of the Mo/MoSe₂ back contact in CIGS solar cells , Mater. Chem. Phys. 279 (2022) 125686, doi: 10.1016/j.matchemphys.2021.125686.

[29] G.X. Guan, J.H. Wu, J. Huang, X. Qian, Polynary metal selenide CoSe₂/NiSe₂/MoSe₂ porous nanospheres as efficient electrocatalytic materials for high-efficiency dye-sensitized solar cells , J. Electroanal. Chem. 924 (2022) 116888, doi: 10.1016/j.jelechem.2022.116888.

[30] S. Ramírez-Velasco, J.R. González-Castillo, F. Ayala-Mató, V. Hernández-Calderón, D. Jiménez-Olarte, O. Vigil-Galán, Back contact modification in Sb₂Se₃ solar cells: the effect of a thin layer of MoSe₂ , Thin Solid Films 751 (2022) 139227, doi: 10.1016/j.tsf.2022.139227.

[31] V.M. Pathak, K.D. Patel, R.J. Pathak, R. Srivastava, Improved photoconversion from MoSe₂ based PEC solar cells , Sol. Energy Mate. Sol. Cells. 73 (2002) 117-123, doi: 10.1016/S0927-0248(01)00116-7.

[32] M. Moustafa, T. Al Zoubi, S. Yasin, Numerical analysis of the role of p-MoSe₂ interfacial layer in CZTSe thin-film solar cells using SCAPS simulation , Optik (Stuttg) 247 (2021) 167885, doi: 10.1016/j.ijleo.2021.167885.

[33] K. Ahmad, H. Kim, MoSe₂-nanoflowers as bi-functional electro-catalyst: An efficient counter electrode material for dye-sensitized solar cells and electrode modifier for hydrazine sensor , Mater. Chem. Phys. 296 (2023) 127260, doi: 10.1016/j.matchemphys.2022.127260.

[34] J. Maleki, M. Eskandari, D. Fathi, PbS-TBAI/MoSe₂-grating as new hole transport layer in perovskite solar cells: Superior efficiency enhancement thru simulation and optimization , J. Alloy. Compd. 960 (2023) 170653, doi: 10.1016/j.jallcom.2023.170653.

[35] M.S. Wang, K. Zheng, X.M. Cai, Stretchable organic solar cells based on ternary phase composition of active layer, Opt. Mater. 159 (2025) 116639, doi: 10.1016/j.optmat.2024.116639.

[36] X.M. Xiong, Y. Yang, C.T. Zhu, H. Zhang, L. Zhang, X.Y. Guo, Stability strategies for perovskite solar cells: From counter electrode materials aspect, Coordin. Chem. Rev. 532 (2025) 216499, doi: 10.1016/j.ccr.2025.216499.

[37] D.O. Idisi, B. Mwakikunga, Two-dimensional layered metal dichalcogenides-based heterostructures for solar cells applications: A review, Sol. Energy 263 (2023) 111981, doi: 10.1016/j.solener.2023.111981.

[38] H.L. Guan, S.Q. Fu, W.Q. Chen, W.J. Ke, G.J. Fang, W.L. Feng, Challenges and perspectives toward wide-bandgap perovskite subcell in four-terminal all-perovskite tandem solar cells, DeCarbon 8 (2025) 100098, doi: 10.1016/j.decarb.2025.100098.

[39] M. Rani, M.M. Khan, A. Numan, M. Khalid, S.M. Abbas, M. Iqbal, M.A. Mansoor, Breaking barriers: Addressing challenges in perovskite solar cell development, J. Alloy. Compd. 1010 (2025) 177648, doi: 10.1016/j.jallcom.2024.177648.

[40] H.C. Zai, P.F. Yang, J. Su, R.Y. Yin, R.D. Fan, Y.T. Wu, X. Zhu, Y. Ma, T. Zhou, W.T. Zhou, Y. Zhang, Z.J. Huang, Y.T. Jiang, N.X. Li, Y. Bai, C. Zhu, Z.H. Huang, J.J. Chang, Q. Chen, Y.F. Zhang, H.P. Zhou, Wafer-scale monolayer MoS₂ film integration for stable, efficient perovskite solar cells , Science 387 (2025) 186-192, doi: 10.1126/science.ado2351.