Locking Surface Dimensionality for Endurable Interface in Perovskite Photovoltaics

Abstract

Surface passivation with organic ammoniums improves perovskite solar cell performance by forming 2D/quasi-2D structures or adsorbing onto surfaces. However, complexity from mixed phases can trigger phase transitions, compromising stability. The control of surface dimensionality after organic ammonium passivation presents significant importance to device stability. In this study, we developed a poly-fluorination strategy for surface treatment in perovskite solar cells, which enabled a high and durable interfacial phase purity after surface passivation. The locked surface dimensionality of perovskite was achieved through robust interaction between the poly-fluorinated ammoniums and the perovskite surface, along with the steric hindrance imparted by fluorine atoms, reducing its reactivity and penetration capabilities. The high hydrophobicity of the poly-fluorinated surface also aids in moisture resistance of the perovskite layer. The champion device achieved a power conversion efficiency (PCE) of 25.2% with certified 24.6%, with 90% of its initial PCE retained after approximately 1200 h under continuous 1-sun illumination, and over 14,400 h storage stability and superior stability under high-temperature operation.

Keywords

interface / long-term stability / perovskite solar cells / poly-fluorination / surface modification

References

[1] National Renewable Energy Laboratory (NREL). Best Research-Cell Efficiency Chart (NREL, 2024). Accessed October 8, 2024, https://www.nrel.gov/pv/cell-efficiency.html.

[2] C. Wang, Y. Ding, Y. Wang, et al., “Metal Halide Perovskites for Solar-To-Chemical Energy Conversion in Aqueous Media,” Carbon Energy 6, no. 11 (2024): e500.

[3] L. Zhang, Y. Wang, X. Meng, et al., “The Issues on the Commercialization of Perovskite Solar Cells,” Materials Futures 3, no. 2 (2024): 022101.

[4] Q. Jiang, Y. Zhao, X. Zhang, et al., “Surface Passivation of Perovskite Film for Efficient Solar Cells,” Nature Photonics 13, no. 7 (2019): 460-466.

[5] L. Zhang, H. Li, K. Zhang, et al., “Major Strategies for Improving the Performance of Perovskite Solar Cells,” iEnergy 2, no. 3 (2023): 172-199.

[6] R. Xu, F. Pan, J. Chen, et al., “Optimizing the Buried Interface in Flexible Perovskite Solar Cells to Achieve Over 24% Efficiency and Long-Term Stability,” Advanced Materials 36, no. 7 (2023): 2308039.

[7] M. Li, J. Zhou, L. Tan, et al, “Brominated PEAI As Multi-Functional Passivator for High-Efficiency Perovskite Solar Cell,” Energy & Environmental Materials 6, no. 3 (2023): e12360.

[8] Y. Tian, X. Zhang, K. Zhao, et al., “High-Entropy Hybrid Perovskites With Disordered Organic Moieties for Perovskite Solar Cells,” Nature Photonics 18, no. 9 (2024): 960-966.

[9] A. H. Proppe, A. Johnston, S. Teale, et al., “Multication Perovskite 2D/3D Interfaces Form via Progressive Dimensional Reduction,” Nature Communications 12, no. 1 (2021): 3472.

[10] S. Teale, A. H. Proppe, E. H. Jung, et al., “Dimensional Mixing Increases the Efficiency of 2D/3D Perovskite Solar Cells,” Journal of Physical Chemistry Letters 11, no. 13 (2020): 5115-5119.

[11] T. Zhao, C.-C. Chueh, Q. Chen, A. Rajagopal, and A. K. Y. Jen, “Defect Passivation of Organic-Inorganic Hybrid Perovskites by Diammonium Iodide Toward High-Performance Photovoltaic Devices,” ACS Energy Letters 1, no. 4 (2016): 757-763.

[12] E. Ugur, E. Aydin, M. De Bastiani, et al., “Front-Contact Passivation Through 2D/3D Perovskite Heterojunctions Enables Efficient Bifacial Perovskite/Silicon Tandem Solar Cells,” Matter 6, no. 9 (2023): 2919-2934.

[13] G. Yan, Z. Ma, Q. Liu, et al., “Synergistic Passivation via Lewis Coordination and Electrostatic Interaction for Efficient Perovskite Solar Cells,” ACS Applied Energy Materials 6, no. 13 (2023): 7014-7024.

[14] D. Yu, Q. Wei, H. Li, et al., “Quasi-2D Bilayer Surface Passivation for High Efficiency Narrow Bandgap Perovskite Solar Cells,” Angewandte Chemie International Edition 61, no. 20 (2022): e202202346.

[15] H. Chen, S. Teale, B. Chen, et al., “Quantum-Size-Tuned Heterostructures Enable Efficient and Stable Inverted Perovskite Solar Cells,” Nature Photonics 16, no. 5 (2022): 352-358.

[16] W. Fu, H. Liu, X. Shi, L. Zuo, X. Li, and A. K. Y. Jen, “Tailoring the Functionality of Organic Spacer Cations for Efficient and Stable Quasi-2D Perovskite Solar Cells,” Advanced Functional Materials 29, no. 25 (2019): 1900221.

[17] T. Yang, L. Gao, J. Lu, et al., “One-Stone-For-Two-Birds Strategy to Attain Beyond 25% Perovskite Solar Cells,” Nature Communications 14, no. 1 (2023): 839.

[18] Q. Wang, J. Zhu, Y. Zhao, et al., “Cross-Layer All-Interface Defect Passivation With Pre-Buried Additive Toward Efficient All-Inorganic Perovskite Solar Cells,” Carbon Energy 6, no. 9 (2024).

[19] X. Huo, J. Lv, K. Wang, et al., “Surface Sulfidation Constructing Gradient Heterojunctions for High-Efficiency (Approaching 18%) Htl-Free Carbon-Based Inorganic Perovskite Solar Cells,” Carbon Energy 6, no. 12 (2024): e586.

[20] Y. Hao, X. Wang, M. Zhu, et al., “Sulfonyl Passivation Through Synergistic Hydrogen Bonding and Coordination Interactions for Efficient and Stable Perovskite Solar Cells,” Journal of Materials Chemistry A 10, no. 24 (2022): 13048-13054.

[21] Z. Ma, R. Yu, Z. Xu, et al., “Crosslinkable and Chelatable Organic Ligand Enables Interfaces and Grains Collaborative Passivation for Efficient and Stable Perovskite Solar Cells,” Small 18, no. 22 (2022): e2201820.

[22] Z. Feng, Z. Xia, Z. Wu, et al., “Efficient and Stable Perovskite Solar Cells Via Organic Surfactant Interfacial Passivation,” Solar Energy 227 (2021): 438-446.

[23] S. Ghosh, D. Pariari, T. Behera, et al., “Buried Interface Passivation of Perovskite Solar Cells by Atomic Layer Deposition of Al₂O₃,” ACS Energy Letters 8, no. 4 (2023): 2058-2065.

[24] L. N. Quan, M. Yuan, R. Comin, et al., “Ligand-Stabilized Reduced-Dimensionality Perovskites,” Journal of the American Chemical Society 138, no. 8 (2016): 2649-2655.

[25] Y. Zheng, T. Niu, X. Ran, et al., “Unique Characteristics of 2D Ruddlesden-Popper (2DRP) Perovskite for Future Photovoltaic Application,” Journal of Materials Chemistry A 7, no. 23 (2019): 13860-13872.

[26] A. Q. Alanazi, M. H. Almalki, A. Mishra, et al., “Benzylammonium-Mediated Formamidinium Lead Iodide Perovskite Phase Stabilization for Photovoltaics,” Advanced Functional Materials 31, no. 30 (2021): 2101163.

[27] M. Wang, Z. Shi, C. Fei, et al., “Ammonium Cations With High pK_a in Perovskite Solar Cells for Improved High-Temperature Photostability,” Nature Energy 8, no. 11 (2023): 1229-1239.

[28] J. Hou, W. Li, H. Zhang, et al., “Synthesis of 2D Perovskite Crystals Via Progressive Transformation of Quantum Well Thickness,” Nature Synthesis 3, no. 2 (2023): 265-275.

[29] S. M. Park, M. Wei, J. Xu, et al., “Engineering Ligand Reactivity Enables High-Temperature Operation of Stable Perovskite Solar Cells,” Science 381, no. 6654 (2023): 209-215.

[30] Q. Jiang, R. Tirawat, R. A. Kerner, et al., “Towards Linking Lab and Field Lifetimes of Perovskite Solar Cells,” Nature 623, no. 7986 (2023): 313-318.

[31] C. Zhang, H. Su, and S. Zhang, “Discussions on the Arrhenius Equation,” University Chemisrty 37, no. 7 (2022): 2204035.

[32] N. E. Courtier, “Interpreting Ideality Factors for Planar Perovskite Solar Cells: Ectypal Diode Theory for Steady-State Operation,” Physical Review Applied 14, no. 2 (2020): 024031.

[33] M. V. Khenkin, E. A. Katz, A. Abate, et al., “Consensus Statement for Stability Assessment and Reporting for Perovskite Photovoltaics Based on Isos Procedures,” Nature Energy 5, no. 1 (2020): 35-49.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.