Solvent-Driven Pore Engineering in Coffee-Derived Activated Hydrochar: Implications for Post-Combustion CO₂ Capture

Abstract

Engineering the pore structure of biomass-derived activated carbons is critical for optimizing their performance in adsorption-based applications. This study demonstrates for the first time that washing hydrochars in solvents of different polarity before activation is a simple yet powerful strategy to tailor pore size distribution. Hydrochar is produced from spent coffee grounds via hydrothermal carbonization, followed by washing in various solvents and activation in KOH. This results in carbons with a very large surface area (∼2700 m²/g), and washing is demonstrated to significantly increase product yield. Furthermore, washing in non-polar or mixed-polarity solvents removes long-chain carboxylic acids and esters from the hydrochar, promoting the development of narrow micropores while suppressing mesopore formation. To illustrate the impact of this structural control of porous carbons, post-combustion CO₂ capture is investigated as a case study. Narrower pore size distribution enhances CO₂ uptake, significantly improving capacity from 2.8 mmol/g for unwashed samples to 3.8 mmol/g for acetone-washed samples. Interestingly, moderate pore size (9–12 Å) is shown to be optimal for CO₂:N₂ selectivity, while smaller pores result in lower selectivity due to stronger interactions between N₂ and the pore walls. These findings highlight the potential role of solvent washing in directing pore architecture of hydrochars for adsorption-based carbon capture technologies and beyond.

Keywords

activated carbon / pore size distribution / porous materials / post-combustion CO₂ capture / pressure swing adsorption

References

[1] World Resources Institute, Climate Watch Historical GHG Emissions (2022), https://www.climatewatchdata.org/ghg-emissions.

[2] S. Paltsev, J. Morris, H. Kheshgi, and H. Herzog, “Hard-to-Abate Sectors: The Role of Industrial Carbon Capture and Storage (CCS) in Emission Mitigation,” Applied Energy 300 (2021): 117322.

[3] A. Cousins, P. Feron, J. Hayward, K. Jiang, and R. Zhai, Further Assessment of Emerging CO₂ Capture Technologies. Tech. Rep. 2019-09 (IEA Greenhouse Gas R&D Programme, 2019).

[4] National Petroleum Council, Meeting the Dual Challenge: A Roadmap to At-Scale Deployment of Carbon Capture, Use, and Storage: Volume III – Analysis of CCUS Technologies (National Petroleum Council, 2019).

[5] F. A. Chowdhury, K. Goto, H. Yamada, and Y. Matsuzaki, “A Screening Study of Alcohol Solvents for Alkanolamine-Based CO₂ Capture,” International Journal of Greenhouse Gas Control 99 (2020): 103081.

[6] Offshore Technology, Quest Carbon Capture and Storage Project, Alberta (2016), https://www.offshore-technology.com/projects/quest-carbon-capture-and-storage-project-alberta/.

[7] D. Patiño-Echeverri and D. C. Hoppock, “Reducing the Energy Penalty Costs of Postcombustion CCS Systems With Amine-Storage,” Environmental Science & Technology 46, no. 2 (2012): 1243–1252.

[8] N. Kladkaew, R. Idem, P. Tontiwachwuthikul, and C. Saiwan, “Corrosion Behavior of Carbon Steel in the Monoethanolamine-H₂O-CO₂-O₂-SO₂ System: Products, Reaction Pathways, and Kinetics,” Industrial & Engineering Chemistry Research 48, no. 23 (2009): 10169–10179.

[9] A. Bello and R. O. Idem, “Pathways for the Formation of Products of the Oxidative Degradation of CO₂-Loaded Concentrated Aqueous Monoethanolamine Solutions During CO₂ Absorption From Flue Gases,” Industrial & Engineering Chemistry Research 44, no. 4 (2005): 945–969.

[10] A. Kogler, N. Rauch, S. Bönisch, M. Derntl, I. Kofler, and A. Haider, “Post-Combustion CO₂ Capture Using Amine-Scrubbing at an Integrated Steel Mill,” BHM Berg- und Hüttenmännische Monatshefte 170, no. 7 (2025): 428–433.

[11] X. Cao, S. Chen, and W. Xiang, “Life Cycle Assessment of Post-Combustion Carbon Capture and Storage for the Ultra-Supercritical Pulverized Coal Power Plant,” Science of the Total Environment 927 (2024): 172047.

[12] A. E. Geweda, M. E. Zayed, M. Y. Khan, and A. B. S. Alquaity, “Mitigating CO₂ Emissions: A Review on Emerging Technologies/Strategies for CO₂ Capture,” Journal of the Energy Institute 118 (2025): 101911.

[13] J. Wu, F. Hillman, C. Z. Liang, Y. Jia, and S. Zhang, “Progressing Thin-Film Membrane Designs for Post-Combustion CO₂ Capture: Performance or Practicality?,” Journal of Materials Chemistry A 11, no. 33 (2023): 17452–17478.

[14] R. Selyanchyn and S. Fujikawa, “Membrane Thinning for Efficient CO₂ Capture,” Science and Technology of Advanced Materials 18, no. 1 (2017): 816–827.

[15] T. A. Barckholtz, K. M. Taylor, S. Narayanan, S. Jolly, and H. Ghezel-Ayagh, “Molten Carbonate Fuel Cells for Simultaneous CO₂ Capture, Power Generation, and H₂ Generation,” Applied Energy 313 (2022): 118553.

[16] E. Antolini, “The Stability of Molten Carbonate Fuel Cell Electrodes: A Review of Recent Improvements,” Applied Energy 88, no. 12 (2011): 4274–4293.

[17] R. Sharifian, R. M. Wagterveld, I. A. Digdaya, C. Xiang, and D. A. Vermaas, “Electrochemical Carbon Dioxide Capture to Close the Carbon Cycle,” Energy & Environmental Science 14, no. 2 (2021): 781–814.

[18] A. Ozden, “CO₂ Capture via Electrochemical pH-Mediated Systems,” ACS Energy Letters 10, no. 4 (2025): 1550–1576.

[19] M. J. Tuinier, H. P. Hamers, and M. van Sint Annaland, “Techno-Economic Evaluation of Cryogenic CO₂ Capture—A Comparison With Absorption and Membrane Technology,” International Journal of Greenhouse Gas Control 5, no. 6 (2011): 1559–1565.

[20] A. Al Moinee, A. A. Rownaghi, and F. Rezaei, “Process Development and Techno-Economic Analysis for Combined and Separated CO₂ Capture-Electrochemical Utilization,” Chemical Engineering Journal 499 (2024): 155909.

[21] A. Pettinau, F. Ferrara, V. Tola, and G. Cau, “Techno-Economic Comparison Between Different Technologies for CO₂-Free Power Generation From Coal,” Applied Energy 193 (2017): 426–439.

[22] F. Sabatino, A. Grimm, F. Gallucci, M. van Sint Annaland, G. J. Kramer, and M. Gazzani, “A Comparative Energy and Costs Assessment and Optimization for Direct Air Capture Technologies,” Joule 5, no. 8 (2021): 2047–2076.

[23] W. A. Algozeeb, P. E. Savas, Z. Yuan, et al., “Plastic Waste Product Captures Carbon Dioxide in Nanometer Pores,” ACS Nano 16, no. 5 (2022): 7284–7290.

[24] Z. Zhou, T. Ma, H. Zhang, et al., “Carbon Dioxide Capture From Open Air Using Covalent Organic Frameworks,” Nature 635, no. 8037 (2024): 96–101.

[25] Linde, “HISORP CC.” in State of the Art: CCS Technologies 2024, eds. H. Barlow and S. Shahi (Global CCS Institute, 2024), 98.

[26] World Oil, Linde to Provide Carbon Capture Technology for Offshore ADNOC Project (2024), https://worldoil.com/news/2024/10/31/linde-to-provide-carbon-capture-technology-for-offshore-adnoc-project/.

[27] Air Products, Hydrogen Pressure Swing Adsorption Experience List (2020).

[28] A. Majid, Linde Will Supply Clean Hydrogen to Dow's ‘World-First’ Net Zero Ethylene Cracker (2024), https://www.thechemicalengineer.com/news/linde-will-supply-clean-hydrogen-to-dow-s-world-first-net-zero-ethylene-cracker/.

[29] K. Haruna, M. Miyake, and H. Sasano, Development of PSA Gas Separation Technology to Reduce Greenhouse Effect. Tech. Rep. vol. 2005-II (Sumitomo Seika Chemicals Co. Ltd., Gas Division, 2005).

[30] S. Akila, UNICEF Hands Over First Fully Solar-Powered Oxygen Plant to Oyo State Government (2024), https://www.unicef.org/nigeria/press-releases/unicef-hands-over-first-fully-solar-powered-oxygen-plant-oyo-state-government.

[31] S. Mann, ETW Commissions First Biomethane Plant in Italy (2025), https://www.wastetodaymagazine.com/news/etw-commissions-first-biomethane-plant-in-italy/.

[32] M. Burgess, Air Liquide, Xebec Ink Supply Deal for Two Helium Purification Projects (2022), https://www.gasworld.com/story/air-liquide-xebec-ink-supply-deal-for-two-helium-purification-projects/2093545.article/.

[33] C. A. Grande, R. P. P. L. Ribeiro, and A. E. Rodrigues, “Challenges of Electric Swing Adsorption for CO₂ Capture,” ChemSuschem 3, no. 8 (2010): 892–898.

[34] B. Ray, S. R. Churipard, and S. C. Peter, “An Overview of the Materials and Methodologies for CO₂ Capture Under Humid Conditions,” Journal of Materials Chemistry A 9, no. 47 (2021): 26498–26527.

[35] H. Miyajima, T. Hirose, and M. Goto, “Heat Effect and Performance in Pressure Swing Adsorption,” in Fundamentals of Adsorption: Proceedings of the Fifth International Conference on Fundamentals of Adsorption, ed. M. D. LeVan (Springer US, 1996), 643–650.

[36] T. Yokoyama, “Japanese R&D on Large-Scale CO₂ Capture,” in Separations Technology VI: New Perspectives on Very Large-Scale Operations (Engineering Conferences International, 2004), 71–82.

[37] R. K. N. New, Series of Nitrogen Generators Cut Consumption of Electricity by Up to 40%, and Are 40% More Compact (Kuraray Chemical Co. Ltd., 2006), https://www.kuraray.com/global-en/news/2006/0113/.

[38] M. L. Gray, K. J. Champagne, D. Fauth, J. P. Baltrus, and H. Pennline, “Performance of Immobilized Tertiary Amine Solid Sorbents for the Capture of Carbon Dioxide,” International Journal of Greenhouse Gas Control 2, no. 1 (2008): 3–8.

[39] A. Samanta, A. Zhao, G. K. H. Shimizu, P. Sarkar, and R. Gupta, “Post-Combustion CO₂ Capture Using Solid Sorbents: A Review,” Industrial & Engineering Chemistry Research 51, no. 4 (2012): 1438–1463.

[40] T. Otowa, R. Tanibata, and M. Itoh, “Production and Adsorption Characteristics of MAXSORB: High-Surface-Area Active Carbon,” Gas Separation & Purification 7, no. 4 (1993): 241–245.

[41] Netherlands Authority for Nuclear Safety and Radiation Protection, Norit B.V. Receives Permission for the Processing and Storage of Radioactive Materials in the Production of Activated Carbon (2024), https://english.autoriteitnvs.nl/latest/news/2024/01/25/norit-b.v.-receives-permission-for-the-processing-and-storage-of-radioactive-materials-in-the-production-of-activated-carbon.

[42] G. Singh, K. S. Lakhi, S. Sil, et al., “Biomass Derived Porous Carbon for CO₂ Capture,” Carbon 148 (2019): 164–186.

[43] CarboTech, Carbon Molecular Sieves (CMS) for Nitrogen Production (2025), https://www.carbotech.de/en/applications/carbon-molecular-sieves-cms/.

[44] A. Aldawsari, M. A. Khan, B. H. Hameed, et al., “Development of Activated Carbon From Phoenix dactylifera Fruit Pits: Process Optimization, Characterization, and Methylene Blue Adsorption,” Desalination and Water Treatment 62 (2017): 273–281.

[45] Y. Liu, Y. Guo, Y. Zhu, et al., “A Sustainable Route for the Preparation of Activated Carbon and Silica From Rice Husk Ash,” Journal of Hazardous Materials 186, no. 2 (2011): 1314–1319.

[46] A. Fletcher, T. Somorin, and O. Aladeokin, “Production of High Surface Area Activated Carbon From Peanut Shell by Chemical Activation With Zinc Chloride: Optimisation and Characterization,” BioEnergy Research 17, no. 1 (2024): 467–478.

[47] M. U. Jamal, A. Fletcher, A. Baby, I. Maso, and L. Šiller, “Scottish Softwood Biochar for Water Remediation Targeting Selected Persistent Organic Pollutants,” Adsorption Science & Technology 42 (2024): 02636174241256854.

[48] T. Tokimoto, N. Kawasaki, T. Nakamura, J. Akutagawa, and S. Tanada, “Removal of Lead Ions in Drinking Water by Coffee Grounds as Vegetable Biomass,” Journal of Colloid and Interface Science 281, no. 1 (2005): 56–61.

[49] S. Andueza, M. P. de Peña, and C. Cid, “Chemical and Sensorial Characteristics of Espresso Coffee as Affected by Grinding and Torrefacto Roast,” Journal of Agricultural and Food Chemistry 51, no. 24 (2003): 7034–7039.

[50] M. Melikoglu, C. Lin, and C. Webb, “Analysing Global Food Waste Problem: Pinpointing the Facts and Estimating the Energy Content,” Open Engineering 3, no. 2 (2013): 157–164.

[51] Instant Coffee-Worldwide|Statista Market Forecast (2025), http://frontend.xmo.prod.aws.statista.com/outlook/cmo/hot-drinks/coffee/instant-coffee/worldwide.

[52] B. Kim, J. Park, S. Baik, and J. W. Lee, “Spent Coffee Derived Hierarchical Porous Carbon and Its Application for Energy Storage,” Journal of Porous Materials 27, no. 2 (2020): 451–463.

[53] Y. H. Hung, T. Y. Liu, and H. Y. Chen, “Renewable Coffee Waste-Derived Porous Carbons as Anode Materials for High-Performance Sustainable Microbial Fuel Cells,” ACS Sustainable Chemistry & Engineering 7, no. 20 (2019): 16991–16999.

[54] D. Y. Chung, Y. J. Son, J. M. Yoo, et al., “Coffee Waste-Derived Hierarchical Porous Carbon as a Highly Active and Durable Electrocatalyst for Electrochemical Energy Applications,” ACS Applied Materials & Interfaces 9, no. 47 (2017): 41303–41313.

[55] L. S. Blankenship and R. Mokaya, “Modulating the Porosity of Carbons for Improved Adsorption of Hydrogen, Carbon Dioxide, and Methane: A Review,” Materials Advances 3, no. 4 (2022): 1905–1930.

[56] M. M. Titirici, R. J. White, C. Falco, and M. Sevilla, “Black Perspectives for a Green Future: Hydrothermal Carbons for Environment Protection and Energy Storage,” Energy & Environmental Science 5, no. 5 (2012): 6796–6822.

[57] A. Cervera-Mata, L. Lara, A. Fernández-Arteaga, J. Ángel Rufián-Henares, and G. Delgado, “Washed Hydrochar From Spent Coffee Grounds: A Second Generation of Coffee Residues. Evaluation as Organic Amendment,” Waste Management 120 (2021): 322–329.

[58] H. Chen, J. Wu, S. Zhang, et al., “Role of Accumulated Alkali and Alkaline-Earth Chloride Salts in Hydrochar Formation Produced From Lignocellulosic Biomass,” ACS Sustainable Chemistry & Engineering 11, no. 23 (2023): 8524–8532.

[59] X. Zhu, Y. Liu, F. Qian, et al., “Demethanation Trend of Hydrochar Induced by Organic Solvent Washing and Its Influence on Hydrochar Activation,” Environmental Science & Technology 51, no. 18 (2017): 10756–10764.

[60] A. Kruse and T. Zevaco, “Properties of Hydrochar as Function of Feedstock, Reaction Conditions and Post-Treatment,” Energies 11, no. 3 (2018): 674.

[61] E. Danso-Boateng, A. B. Ross, T. Mariner, J. Hammerton, and M. Fitzsimmons, “Hydrochars Produced by Hydrothermal Carbonisation of Seaweed, Coconut Shell and Oak: Effect of Processing Temperature on Physicochemical Adsorbent Characteristics,” SN Applied Sciences 4, no. 8 (2022): 203.

[62] S. Mopoung and N. Dejang, “Activated Carbon Preparation From Eucalyptus Wood Chips Using Continuous Carbonization–Steam Activation Process in a Batch Intermittent Rotary Kiln,” Scientific Reports 11, no. 1 (2021): 13948.

[63] M. Cox and R. Mokaya, “Ultra-High Surface Area Mesoporous Carbons for Colossal Pre Combustion CO₂ Capture and Storage as Materials for Hydrogen Purification,” Sustainable Energy & Fuels 1, no. 6 (2017): 1414–1424.

[64] Y. Gao, Q. Yue, B. Gao, and A. Li, “Insight Into Activated Carbon From Different Kinds of Chemical Activating Agents: A Review,” Science of the Total Environment 746 (2020): 141094.

[65] X. Yuan, J. Wang, S. Deng, et al., “Sustainable Food Waste Management: Synthesizing Engineered Biochar for CO₂ Capture,” ACS Sustainable Chemistry & Engineering 10, no. 39 (2022): 13026–13036.

[66] J. F. R. Flora, X. Lu, L. Li, J. R. V. Flora, and N. D. Berge, “The Effects of Alkalinity and Acidity of Process Water and Hydrochar Washing on the Adsorption of Atrazine on Hydrothermally Produced Hydrochar,” Chemosphere 93, no. 9 (2013): 1989–1996.

[67] C. R. C. Jensen and N. A. Seaton, “An Isotherm Equation for Adsorption to High Pressures in Microporous Adsorbents,” Langmuir 12, no. 11 (1996): 2866–2867.

[68] S. Yu, J. He, Z. Zhang, et al., “Towards Negative Emissions: Hydrothermal Carbonization of Biomass for Sustainable Carbon Materials,” Advanced Materials 36, no. 18 (2024): 2307412.

[69] C. Falco, N. Baccile, and M. M. Titirici, “Morphological and Structural Differences Between Glucose, Cellulose and Lignocellulosic Biomass Derived Hydrothermal Carbons,” Green Chemistry 13, no. 11 (2011): 3273–3281.

[70] A. Funke and F. Ziegler, “Hydrothermal Carbonization of Biomass: A Summary and Discussion of Chemical Mechanisms for Process Engineering,” Biofuels, Bioproducts and Biorefining 4, no. 2 (2010): 160–177.

[71] W. Sangchoom and R. Mokaya, “Valorization of Lignin Waste: Carbons From Hydrothermal Carbonization of Renewable Lignin as Superior Sorbents for CO₂ and Hydrogen Storage,” ACS Sustainable Chemistry & Engineering 3, no. 7 (2015): 1658–1667.

[72] M. Sevilla and A. B. Fuertes, “Chemical and Structural Properties of Carbonaceous Products Obtained by Hydrothermal Carbonization of Saccharides,” Chemistry – A European Journal 15, no. 16 (2009): 4195–4203.

[73] O. O. D. Afolabi, M. Sohail, and Y. L. Cheng, “Optimisation and Characterisation of Hydrochar Production From Spent Coffee Grounds by Hydrothermal Carbonisation,” Renewable Energy 147 (2020): 1380–1391.

[74] J. S. Woodman, “Carboxylic Acids,” in Coffee: Volume 1: Chemistry, eds. R. J. Clarke and R. Macrae (Springer Netherlands, 1985), 266–289.

[75] F. Battista, S. Zanzoni, G. Strazzera, M. Andreolli, and D. Bolzonella, “The Cascade Biorefinery Approach for the Valorization of the Spent Coffee Grounds,” Renewable Energy 157 (2020): 1203–1211.

[76] R. Campos-Vega, G. Loarca-Piña, H. A. Vergara-Castañeda, and B. D. Oomah, “Spent Coffee Grounds: A Review on Current Research and Future Prospects,” Trends in Food Science & Technology 45, no. 1 (2015): 24–36.

[77] A. N. A. El-Hendawy, “Variation in the FTIR Spectra of a Biomass Under Impregnation, Carbonization and Oxidation Conditions,” Journal of Analytical and Applied Pyrolysis 75, no. 2 (2006): 159–166.

[78] J. Coates, “Interpretation of Infrared Spectra, A Practical Approach,” in Encyclopedia of Analytical Chemistry (1st ed.), ed. R. A. Meyers (Wiley, 2000).

[79] B. H. Stuart, Infrared Spectroscopy: Fundamentals and Applications. Analytical Techniques in the Sciences (1st ed.) (Wiley, 2004).

[80] N. A. M. Barakat, M. S. Mahmoud, and H. M. Moustafa, “Comparing Specific Capacitance in Rice Husk-Derived Activated Carbon Through Phosphoric Acid and Potassium Hydroxide Activation Order Variations,” Scientific Reports 14, no. 1 (2024): 1460.

[81] K. Artyushkova, “Misconceptions in Interpretation of Nitrogen Chemistry From X-Ray Photoelectron Spectra,” Journal of Vacuum Science & Technology. A 38, no. 3 (2020): 031002.

[82] M. Smith, L. Scudiero, J. Espinal, J. S. McEwen, and M. Garcia-Perez, “Improving the Deconvolution and Interpretation of XPS Spectra From Chars by Ab Initio Calculations,” Carbon 110 (2016): 155–171.

[83] M. S. Dresselhaus, A. Jorio, A. G. Souza Filho, and R. Saito, “Defect Characterization in Graphene and Carbon Nanotubes Using Raman Spectroscopy,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 368, no. 1932 (2010): 5355–5377.

[84] M. Vorokhta, M. I. M. Kusdhany, M. Švábová, M. Nishihara, K. Sasaki, and S. M. Lyth, “Hierarchically Porous Carbon Foams Coated With Carbon Nitride: Insights Into Adsorbents for Pre-Combustion and Post-Combustion CO₂ Separation,” Separation and Purification Technology 354 (2025): 129054.

[85] A. B. Brown, B. J. McKeogh, G. A. Tompsett, R. Lewis, N. A. Deskins, and M. T. Timko, “Structural Analysis of Hydrothermal Char and Its Models by Density Functional Theory Simulation of Vibrational Spectroscopy,” Carbon 125 (2017): 614–629.

[86] S. Yuan, A. Brown, Z. Zheng, et al., “Glucose Hydrochar Consists of Linked Phenol, Furan, Arene, Alkyl, and Ketone Structures Revealed by Advanced Solid-State Nuclear Magnetic Resonance,” Solid State Nuclear Magnetic Resonance 134 (2024): 101973.

[87] L. S. Blankenship, N. Balahmar, and R. Mokaya, “Oxygen-Rich Microporous Carbons With Exceptional Hydrogen Storage Capacity,” Nature Communications 8, no. 1 (2017): 1545.

[88] A. Altwala and R. Mokaya, “Predictable and Targeted Activation of Biomass to Carbons With High Surface Area Density and Enhanced Methane Storage Capacity,” Energy & Environmental Science 13, no. 9 (2020): 2967–2978.

[89] J. L. Rowlandson, K. J. Edler, M. Tian, and V. P. Ting, “Toward Process-Resilient Lignin-Derived Activated Carbons for Hydrogen Storage Applications,” ACS Sustainable Chemistry & Engineering 8, no. 5 (2020): 2186–2195.

[90] M. Thommes, K. Kaneko, A. V. Neimark, et al., “Physisorption of Gases, With Special Reference to the Evaluation of Surface Area and Pore Size Distribution (IUPAC Technical Report),” Pure and Applied Chemistry 87, no. 9–10 (2015): 1051–1069.

[91] J. Song, Q. Meng, J. Wang, et al., “Length Exclusion Separation of Acetone/Butanol Using ZIF-302 Derivatives With Adjustable Ellipsoidal Cage Sizes,” Separation and Purification Technology 312 (2023): 123371.

[92] B. L. Suh and J. Kim, “Reverse Shape Selectivity of Hexane Isomer in Ligand Inserted MOF-74,” RSC Advances 10, no. 38 (2020): 22601–22605.

[93] F. Rodriguez-Reinoso, J. M. Martin-Martinez, C. Prado-Burguete, and B. McEnaney, “A Standard Adsorption Isotherm for the Characterization of Activated Carbons,” Journal of Physical Chemistry 91, no. 3 (1987): 515–516.

[94] V. Bejenari, A. Marcu, A. M. Ipate, et al., “Physicochemical Characterization and Energy Recovery of Spent Coffee Grounds,” Journal of Materials Research and Technology 15 (2021): 4437–4451.

[95] H. Yang, R. Yan, H. Chen, D. H. Lee, and C. Zheng, “Characteristics of Hemicellulose, Cellulose and Lignin Pyrolysis,” Fuel 86, no. 12 (2007): 1781–1788.

[96] M. P. Olszewski, P. J. Arauzo, P. A. Maziarka, F. Ronsse, and A. Kruse, “Pyrolysis Kinetics of Hydrochars Produced From Brewer's Spent Grains,” Catalysts 9, no. 7 (2019): 625.

[97] C. H. Dang and T. D. Nguyen, “Physicochemical Characterization of Robusta Spent Coffee Ground Oil for Biodiesel Manufacturing,” Waste and Biomass Valorization 10, no. 9 (2019): 2703–2712.

[98] W. Tu, Y. Liu, Z. Xie, et al., “A Novel Activation-Hydrochar via Hydrothermal Carbonization and KOH Activation of Sewage Sludge and Coconut Shell for Biomass Wastes: Preparation, Characterization and Adsorption Properties,” Journal of Colloid and Interface Science 593 (2021): 390–407.

[99] J. Wang and S. Kaskel, “KOH Activation of Carbon-Based Materials for Energy Storage,” Journal of Materials Chemistry 22, no. 45 (2012): 23710–23725.

[100] S. Gál, T. Meisel, and L. Erdey, “On the Thermal Analysis of Aliphatic Carboxylic Acids and Their Salts,” Journal of Thermal Analysis 1, no. 2 (1969): 159–170.

[101] L. H. Bui and A. de Klerk, “Thermal Behavior of Potassium C1–C12 n-Alkanoates and Its Relevance to Fischer–Tropsch,” Journal of Chemical & Engineering Data 59, no. 2 (2014): 400–411.

[102] D. E. Rogers, “Thermal Analysis of Octadecanoic Acid and Some of Its Salts,” Thermochimica Acta 77, no. 1 (1984): 123–132.

[103] N. Montoya Sánchez and A. de Klerk, “Oxidative Ring-Opening of Aromatics: Thermochemistry of Sodium, Potassium and Magnesium Biphenyl Carboxylates,” Thermochimica Acta 645 (2016): 31–42.

[104] Y. Guo and Q. Wang, “Fabrication and Characterization of Activated Carbon From Phyllostachys edulis Using Single-Step KOH Activation With Different Temperatures,” Processes 10, no. 9 (2022): 1712.

[105] F. Kapteijn, G. Abbel, and J. A. Moulijn, “CO₂ Gasification of Carbon Catalysed by Alkali Metals,” Fuel 63, no. 8 (1984): 1036–1042.

[106] Y. Fang, L. Yin, H. Yang, X. Gong, Y. Chen, and H. Chen, “Catalytic Mechanisms of Potassium Salts on Pyrolysis of β-O-4 Type Lignin Model Polymer Based on DFT Study,” Proceedings of the Combustion Institute 38, no. 3 (2021): 3969–3976.

[107] M. Xia, W. Chen, J. Wu, et al., “Organic Salt-Assisted Pyrolysis for Preparation of Porous Carbon From Cellulose, Hemicellulose and Lignin: New Insight From Structure Evolution,” Fuel 291 (2021): 120185.

[108] M. A. Lillo-Ródenas, J. Juan-Juan, D. Cazorla-Amorós, and A. Linares-Solano, “About Reactions Occurring During Chemical Activation With Hydroxides,” Carbon 42, no. 7 (2004): 1371–1375.

[109] E. Raymundo-Piñero, P. Azaïs, T. Cacciaguerra, D. Cazorla-Amorós, A. Linares-Solano, and F. Béguin, “KOH and NaOH Activation Mechanisms of Multiwalled Carbon Nanotubes With Different Structural Organisation,” Carbon 43, no. 4 (2005): 786–795.

[110] Y. Zhang, X. Xu, Q. Geng, et al., “Redefining the Roles of Alkali Activators for Porous Carbon,” Chemical Science 16, no. 4 (2025): 2034–2043.

[111] H. Laksaci, A. Khelifi, B. Belhamdi, and M. Trari, “Valorization of Coffee Grounds into Activated Carbon Using Physic—Chemical Activation by KOH/CO₂,” Journal of Environmental Chemical Engineering 5, no. 5 (2017): 5061–5066.

[112] M. Jagtoyen and F. Derbyshire, “Activated Carbons From Yellow Poplar and White Oak by H₃PO₄ Activation,” Carbon 36, no. 7 (1998): 1085–1097.

[113] S. M. Lyth, “Doped and Decorated Carbon Foams for Energy Applications,” in Nanocarbons for Energy Conversion: Supramolecular Approaches, ed. N. Nakashima (Springer International Publishing, 2019), 175–203.

[114] J. Alcañiz-Monge, M. Pérez-Cadenas, and D. Lozano-Castelló, “Influence of Pore Size Distribution on Water Adsorption on Silica Gels,” Journal of Porous Materials 17, no. 4 (2010): 409–416.

[115] M. M. Kohonen, D. Geromichalos, M. Scheel, C. Schier, and S. Herminghaus, “On Capillary Bridges in Wet Granular Materials,” Physica A: Statistical Mechanics and its Applications 339, no. 1 (2004): 7–15.

[116] F. G. Baddour, L. Snowden-Swan, J. D. Super, and K. M. Van Allsburg, “Estimating Precommercial Heterogeneous Catalyst Price: A Simple Step-Based Method,” Organic Process Research & Development 22, no. 12 (2018): 1599–1605.

[117] K. Kwac, J. H. Lee, J. W. Choi, and Y. Jung, “Computational Analysis of Pressure-Dependent Optimal Pore Size for CO₂ Capture With Graphitic Surfaces,” Journal of Physical Chemistry C 120, no. 7 (2016): 3978–3985.

[118] J. B. Lin, T. T. T. Nguyen, R. Vaidhyanathan, et al., “A Scalable Metal-Organic Framework as a Durable Physisorbent for Carbon Dioxide Capture,” Science 374, no. 6574 (2021): 1464–1469.

[119] R. Banerjee, H. Furukawa, D. Britt, C. Knobler, M. O'Keeffe, and O. M. Yaghi, “Control of Pore Size and Functionality in Isoreticular Zeolitic Imidazolate Frameworks and Their Carbon Dioxide Selective Capture Properties,” Journal of the American Chemical Society 131, no. 11 (2009): 3875–3877.

[120] W. Lu, D. Yuan, D. Zhao, et al., “Porous Polymer Networks: Synthesis, Porosity, and Applications in Gas Storage/Separation,” Chemistry of Materials 22, no. 21 (2010): 5964–5972.

[121] L. S. Blankenship, N. Albeladi, T. Alkhaldi, A. Madkhali, and R. Mokaya, “Brute Force Determination of the Optimum Pore Sizes for CO₂ Uptake in Turbostratic Carbons,” Energy Advances 1, no. 12 (2022): 1009–1020.

[122] X. Wu, B. Xiao, R. Li, C. Wang, J. Huang, and Z. Wang, “Mechanisms and Factors Affecting Sorption of Microcystins Onto Natural Sediments,” Environmental Science & Technology 45, no. 7 (2011): 2641–2647.

[123] A. Nuhnen and C. Janiak, “A Practical Guide to Calculate the Isosteric Heat/Enthalpy of Adsorption via Adsorption Isotherms in Metal–Organic Frameworks, MOFs,” Dalton Transactions 49, no. 30 (2020): 10295–10307.

[124] X. Ren, H. Li, J. Chen, et al., “N-Doped Porous Carbons With Exceptionally High CO₂ Selectivity for CO₂ Capture,” Carbon 114 (2017): 473–481.

[125] M. Vorokhta, M. I. M. Kusdhany, D. Vöröš, M. Nishihara, K. Sasaki, and S. M. Lyth, “Microporous Carbon Foams: The Effect of Nitrogen-Doping on CO₂ Capture and Separation via Pressure Swing Adsorption,” Chemical Engineering Journal 471 (2023): 144524.

[126] M. I. M. Kusdhany, Z. Ma, A. Mufundirwa, et al., “Hydrogen and Carbon Dioxide Uptake on Scalable and Inexpensive Microporous Carbon Foams,” Microporous and Mesoporous Materials 343 (2022): 112141.

[127] B. Dziejarski, J. Serafin, K. Andersson, and R. Krzyżyńska, “CO₂ Capture Materials: A Review of Current Trends and Future Challenges,” Materials Today Sustainability 24 (2023): 100483.

[128] I. Kochetygov, S. Bulut, M. Asgari, and W. L. Queen, “Selective CO₂ Adsorption by a New Metal– Organic Framework: Synergy Between Open Metal Sites and a Charged Imidazolinium Backbone,” Dalton Transactions 47, no. 31 (2018): 10527–10535.

[129] H. Chen, Y. Guo, K. Zhou, J. Wang, Z. Zeng, and L. Li, “Mechanism Exploration of Surface Functional Groups and Pore Sizes on CO₂ Adsorptive Separation by GCMC and DFT Simulations,” Separation and Purification Technology 318 (2023): 123993.

[130] E. M. Rundquist, C. J. Pink, and A. G. Livingston, “Organic Solvent Nanofiltration: A Potential Alternative to Distillation for Solvent Recovery From Crystallisation Mother Liquors,” Green Chemistry 14, no. 8 (2012): 2197–2205.

[131] A. I. Sultana and M. T. Reza, “Techno-Economic Assessment of Superactivated Hydrochar Production by KOH Impregnation Compared to Direct Chemical Activation,” Biomass Conversion and Biorefinery 15, no. 2 (2025): 1957–1969.

[132] Producer Price Indexes for Chemical Manufacturing. Tech. Rep. PCU325—325 (U.S. Bureau of Labor Statistics, 2025).

[133] J. Rouquerol, P. Llewellyn, and F. Rouquerol, “Is the BET Equation Applicable to Microporous Adsorbents? (Vol. 160),” in Studies in Surface Science and Catalysis, eds. P. L. Llewellyn, F. Rodriquez-Reinoso, J. Rouqerol, and N. Seaton (Elsevier, 2007), 49–56.

[134] S. Brunauer, P. H. Emmett, and E. Teller, “Adsorption of Gases in Multimolecular Layers,” Journal of the American Chemical Society 60, no. 2 (1938): 309–319.

[135] P. Iacomi and P. L. Llewellyn, “pyGAPS: A Python-Based Framework for Adsorption Isotherm Processing and Material Characterisation,” Adsorption 25, no. 8 (2019): 1533–1542.

[136] J. Jagiello, “Stable Numerical Solution of the Adsorption Integral Equation Using Splines,” Langmuir 10, no. 8 (1994): 2778–2785.

[137] J. Jagiello and J. P. Olivier, “2D-NLDFT Adsorption Models for Carbon Slit-Shaped Pores With Surface Energetical Heterogeneity and Geometrical Corrugation,” Carbon 55 (2013): 70–80.

[138] J. Jagiello and J. P. Olivier, “A Simple Two-Dimensional NLDFT Model of Gas Adsorption in Finite Carbon Pores. Application to Pore Structure Analysis,” Journal of Physical Chemistry C 113, no. 45 (2009): 19382–19385.

[139] J. Jagiello, C. Ania, J. B. Parra, and C. Cook, “Dual Gas Analysis of Microporous Carbons Using 2D-NLDFT Heterogeneous Surface Model and Combined Adsorption Data of N₂ and CO₂,” Carbon 91 (2015): 330–337.

[140] W. Henry, III, “Experiments on the Quantity of Gases Absorbed by Water, at Different Temperatures, and Under Different Pressures,” Philosophical Transactions of the Royal Society of London 93 (1803): 29–274.

[141] C. M. Simon, B. Smit, and M. Haranczyk, “pyIAST: Ideal Adsorbed Solution Theory (IAST) Python Package,” Computer Physics Communications 200 (2016): 364–380.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.