Research Progress on High-Energy Rechargeable Sn-Based Batteries

Abstract

Sn-based batteries have emerged as an optimal energy storage system owing to their abundant Sn resources, environmental compatibility, non-toxicity, corrosion resistance, and high hydrogen evolution overpotential. However, the practical application of these batteries is hindered by challenges such as “dead Sn” shedding and hydrogen evolution side reactions. Extensive research has focused on improving the performance of Sn-based batteries. This paper provides a comprehensive review of the recent advancements in Sn-based battery research, including the selection of current collectors, electrolyte optimization, and the development of new cathode materials. The energy storage mechanisms and challenges of Sn-based batteries are discussed. Overall, this paper presents future perspectives of high-performance rechargeable Sn-based batteries and provides valuable guidance for developing Sn-based energy storage technologies.

Keywords

cathode materials / current collectors / dead Sn shedding / electrolytes / Sn-based batteries

References

[1] Y. Zhao, C. Yang, and Y. Yu, “A Review on Covalent Organic Frameworks for Rechargeable Zinc-Ion Batteries,” Chinese Chemical Letters 35 (2024): 108865.

[2] Z. Liu, J. Liu, X. Xiao, et al., “Unraveling Paradoxical Effects of Large Current Density on Zn Deposition,” Advanced Materials 36 (2024): 2404140.

[3] D. H. Liu, C. Xu, F. Xu, et al., “Interphase Synergy Achieving Stable Cycling Performance for Aqueous Zn–MnO₂ Battery,” Carbon Neutralization 4 (2025): e70014.

[4] X. Chen, B. Wang, Y. Ye, J. Liang, and J. Kong, “Design of Electrodes and Electrolytes for Silicon-Based Anode Lithium-Ion Batteries,” Energy & Environmental Materials 8 (2025): e12838.

[5] B. Wu, Y. Mu, J. He, et al., “In Situ Characterizations for Aqueous Rechargeable Zinc Batteries,” Carbon Neutralization 2 (2023): 310–338.

[6] Z. Liu, X. Zhang, J. Luo, and Y. Yu, “Application of Metal–Organic Frameworks to the Anode Interface in Metal Batteries,” Chinese Chemical Letters 35 (2024): 109500.

[7] Z. Zhang, G. Li, X. Du, et al., “Rapid Thermal Shutdown of Deep-Eutectic-Polymer Electrolyte Enabling Overheating Self-Protection of Lithium Metal Batteries,” Advanced Science 11 (2024): 2409628.

[8] M. Zhang, C. Sun, G. Chen, et al., “Synergetic Bifunctional Cu–In Alloy Interface Enables Ah-Level Zn Metal Pouch Cells,” Nature Communications 15 (2024): 9455.

[9] Y. Zhao, Y. Han, and Y. Yu, “Design of Electronic Conductive Covalent–Organic Frameworks and Their Opportunities in Lithium Batteries,” Chemical Engineering Journal 497 (2024): 154997.

[10] T. Pan, Y. Li, Z. Yao, et al., “Research Advances on Lithium-Ion Batteries Calendar Life Prognostic Models,” Carbon Neutralization 4 (2025): e192.

[11] Y. Han and Y. Yu, “Ultralong Discharge Time Enabled Using Etched Germanium Anodes in Germanium–Air Batteries,” Chinese Chemical Letters 36 (2025): 110144.

[12] D. Du, L. Zeng, N. Lan, et al., “Understanding and Mastering Multiphysical Fields Toward Dendrite-Free Aqueous Zinc Batteries,” Advanced Energy Materials 14 (2024): 2403153.

[13] Z. Fan, Z. Hou, W. Lu, et al., “Combination Displacement/Intercalation Reaction of Ag_0.11V₂O₅ Cathode Realizes Efficient Manganese Ion Storage Properties,” Small 21 (2025): 2406501.

[14] H. Liu, J. Zhang, P. Xiang, S. Zhang, S. Shi, and W. Liu, “Mobius Strip-Like’ FeSn Alloy: A Novel Highly-Distorted 3D Hierarchical Porous Anode for Ultrafast and Stable Li Storage,” Energy Storage Materials 66 (2024): 103234.

[15] Y. Zhao, K. Feng, and Y. Yu, “A Review on Covalent Organic Frameworks as Artificial Interface Layers for Li and Zn Metal Anodes in Rechargeable Batteries,” Advanced Science 11 (2024): 2308087.

[16] Z. Zhao, X. Xiao, Z. Zhang, et al., “Quasi/All Solid-State Electrolytes for Lithium–Carbon Dioxide Batteries,” Carbon Neutralization 4 (2025): e70026.

[17] J. Lin, P. Huang, T. Naren, et al., “Salt-Assisted Recovery of Sodium Metal Anodes for High-Rate Capability Sodium Batteries,” Advanced Materials 36 (2024): 2409976.

[18] T. Ji, X. Liu, T. Zhang, et al., “Potassium Metal Underpotential Deposition in Crystalline Carbon of Potassium-Ion Batteries,” Advanced Energy Materials 14 (2024): 2401908.

[19] Z. Chen, Z. Huang, C. Wang, et al., “Supramolecular Crystals Based Fast Single Ion Conductor for Long-Cycling Solid Zinc Batteries,” Angewandte Chemie International Edition 63 (2024): e202406683.

[20] C. Yang, Y. Xiang, and Y. Yu, “Electronic Conductive Metal–Organic Frameworks for Aqueous Rechargeable Zinc-Ion Battery Cathodes: Design, Progress, and Prospects,” Carbon Energy 7 (2025): e70012.

[21] X. Zhang, F. Deng, Z. Liu, and Y. Yu, “Long-Lifetime Aqueous Si–Air Batteries Prepared by Growing Multi-Dimensionally Tunable ZIF-8 Crystals on Si Anodes,” Journal of Colloid and Interface Science 674 (2024): 722–734.

[22] J. Bi, Y. Liu, Z. Du, et al., “Bottom-Up Magnesium Deposition Induced by Paper-Based Triple-Gradient Scaffolds Toward Flexible Magnesium Metal Batteries,” Advanced Materials 36 (2024): 2309339.

[23] C. Xu, T. Diemant, X. Liu, and S. Passerini, “Locally Concentrated Deep Eutectic Liquids Electrolytes for Low-Polarization Aluminum Metal Batteries,” Advanced Materials 36 (2024): 2400263.

[24] F. Deng, T. Zhao, X. Zhang, et al., “Reduced Graphene Oxide Assembled on the Si Nanowire Anode Enabling Low Passivation and Hydrogen Evolution for Long-Life Aqueous Si–Air Batteries,” Chinese Chemical Letters 36 (2025): 109897.

[25] C. Chu, C. Wang, W. Meng, et al., “Interfacial Chemistry and Structural Engineering Modified Carbon Fibers for Stable Sodium Metal Anodes,” Carbon Energy 6 (2024): e601.

[26] B. Long, F. Wu, Y. Li, et al., “Manipulating the Corrosion Homogeneity of Aluminum Anode Toward Long-Life Rechargeable Aluminum Battery,” Carbon Neutralization 3 (2024): 64–73.

[27] W. Cao, M. Liu, W. Song, et al., “Regulating Sodium Deposition Behavior by a Triple-Gradient Framework for High-Performance Sodium Metal Batteries,” Advanced Science 11 (2024): 2402321.

[28] H. Lin, J. Meng, W. Guo, et al., “Deciphering the Dynamic Interfacial Chemistry of Calcium Metal Anodes,” Energy & Environmental Science 17 (2024): 6548–6558.

[29] W. Lyu, X. Yu, Y. Lv, A. M. Rao, J. Zhou, and B. Lu, “Building Stable Solid-State Potassium Metal Batteries,” Advanced Materials 36 (2024): 2305795.

[30] L. Yan, Q. Zhai, S. Zhang, et al., “The Burgeoning Zinc Powder Anode for Aqueous Zinc Metal Batteries: From Electrode Preparation to Performance Enhancement,” Advanced Energy Materials 14 (2024): 2401328.

[31] S. Wang, Y. Guo, X. Du, et al., “Preferred Crystal Plane Electrodeposition of Aluminum Anode With High Lattice-Matching for Long-Life Aluminum Batteries,” Nature Communications 15 (2024): 6476.

[32] L. Wang, S. Riedel, and Z. Zhao-Karger, “Challenges and Progress in Anode-Electrolyte Interfaces for Rechargeable Divalent Metal Batteries,” Advanced Energy Materials 14 (2024): 2470164.

[33] M. Radi, T. Purkait, D. S. Tchitchekova, et al., “A Comprehensive Study on the Parameters Affecting Magnesium Plating/Stripping Kinetics in Rechargeable Mg Batteries,” Advanced Energy Materials 14 (2024): 2401587.

[34] K. Feng, Y. Zhao, Z. Liu, and Y. Yu, “Long Cycle Life Aqueous Zinc-Ion Battery Enabled by a ZIF-N Protective Layer With Electron-Withdrawing Group and Zincophilicity on the Zn Anode,” Journal of Colloid and Interface Science 678 (2025): 76–87.

[35] J. Long, Y. Liu, Z. He, et al., “Redesigning Solvation Structure Toward Passivation-Free Magnesium Metal Batteries,” ACS Nano 18 (2024): 15239–15248.

[36] D. Yu, Z. Wang, J. Yang, et al., “Low-Temperature and Fast-Charge Sodium Metal Batteries,” Small 20 (2024): 2311810.

[37] C. Kim, H. Kim, M. K. Sadan, et al., “Development and Evaluation of Sn Foil Anode for Sodium-Ion Batteries,” Small 17 (2021): 2102618.

[38] G. Wang, M. Aubin, A. Mehta, et al., “Anode Materials: Stabilization of Sn Anode Through Structural Reconstruction of a Cu–Sn Intermetallic Coating Layer,” Advanced Materials 32 (2020): 2003684.

[39] W. Li, X. Sun, and Y. Yu, “Si-, Ge-, Sn-Based Anode Materials for Lithium-Ion Batteries: From Structure Design to Electrochemical Performance,” Small Methods 1 (2017): 1600037.

[40] W. Zhou, M. Song, P. Liang, et al., “High-Energy Sn–Ni and Sn–Air Aqueous Batteries via Stannite-Ion Electrochemistry,” Journal of the American Chemical Society 145 (2023): 10880–10889.

[41] L. Tang, H. Peng, J. Kang, et al., “Zn-Based Batteries for Sustainable Energy Storage: Strategies and Mechanisms,” Chemical Society Reviews 53 (2024): 4877–4925.

[42] X. Liu, F. Yang, W. Xu, Y. Zeng, J. He, and X. Lu, “Zeolitic Imidazolate Frameworks as Zn²⁺ Modulation Layers to Enable Dendrite-Free Zn Anodes,” Advanced Science 7 (2020): 2002173.

[43] Z. Pan, Q. Cao, W. Gong, et al., “Zincophilic 3D ZnOHF Nanowire Arrays With Ordered and Continuous Zn²⁺ Ion Modulation Layer Enable Long-Term Stable Zn Metal Anodes,” Energy Storage Materials 50 (2022): 435–443.

[44] W. Zhou, S. Ding, D. Zhao, and D. Chao, “An Energetic Sn Metal Aqueous Battery,” Joule 7 (2023): 1104–1107.

[45] H. Wang, K. Wang, Y. Zhuo, et al., “Magnetoelectric Coupling for Metal–Air Batteries,” Advanced Functional Materials 33 (2023): 2210127.

[46] C. Tang, W. Shan, Y. Zheng, et al., “Recovery of Li/Co From Spent Lithium-Ion Battery Through Iron–Air Batteries,” Chemical Engineering Journal 502 (2024): 157578.

[47] X. Liu, K. Wang, Y. Liu, et al., “Constructing an Ion-Oriented Channel on a Zinc Electrode Through Surface Engineering,” Carbon Energy 5 (2023): e343.

[48] F. Chen, Q. Sun, W. Gao, J. Liu, C. Yan, and Q. Liu, “Study on a High Current Density Redox Flow Battery With Tin(II)/Tin as Negative Couple,” Journal of Power Sources 280 (2015): 227–230.

[49] X. Zhou, L. Lin, Y. Lv, X. Zhang, and Q. Wu, “A Sn–Fe Flow Battery With Excellent Rate and Cycle Performance,” Journal of Power Sources 404 (2018): 89–95.

[50] Y. Zeng, Z. Yang, F. Lu, and Y. Xie, “A Novel Tin–Bromine Redox Flow Battery for Large-Scale Energy Storage,” Applied Energy 255 (2019): 113756.

[51] L. Wei, H. R. Jiang, Y. X. Ren, M. C. Wu, J. B. Xu, and T. S. Zhao, “Investigation of an Aqueous Rechargeable Battery Consisting of Manganese Tin Redox Chemistries for Energy Storage,” Journal of Power Sources 437 (2019): 226918.

[52] J. Ouyang, Y. Wang, N. Wu, et al., “Dendrite-Free Sn Anode With High Reversibility for Aqueous Batteries Enabled by ‘Water-in-Salt’ Electrolyte,” ACS Applied Energy Materials 3 (2020): 5031–5038.

[53] Y. Yao, Z. Wang, Z. Li, and Y. C. Lu, “A Dendrite-Free Tin Anode for High-Energy Aqueous Redox Flow Batteries,” Advanced Materials 33 (2021): 2008095.

[54] H. Chen, Z. Wang, S. Zhang, et al., “A Low-Cost Neutral Aqueous Redox Flow Battery With Dendrite-Free Tin Anode,” Journal of the Electrochemical Society 168 (2021): 110547.

[55] H. Zhang, D. Xu, F. Yang, et al., “A High-Capacity Sn Metal Anode for Aqueous Acidic Batteries,” Joule 7 (2023): 971–985.

[56] Q. Guo, Y. Yang, L. Wang, N. Chen, and L. Qu, “The Feasible Design of Quasi-Solid-State Aqueous Tin–Iodine Batteries,” Renewables 1 (2023): 474–483.

[57] X. Li, Y. Tang, C. Han, et al., “A Static Tin–Manganese Battery With 30000-cycle Lifespan Based on Stabilized Mn³⁺/Mn²⁺ Redox Chemistry,” ACS Nano 17 (2023): 5083–5094.

[58] D. Xu, J. Xie, L. Zhou, et al., “Tendency Regulation of Competing Reactions Toward Highly Reversible Tin Anode for Aqueous Alkaline Batteries,” Small 19 (2023): 2301931.

[59] Z. Yu, Q. Wang, Y. Li, et al., “Highly Reversible Tin Redox Chemistry for Stable Anode-Free Acidic Proton Battery,” Joule 8 (2024): 1063–1079.

[60] D. Xu, H. Zhang, J. Xie, et al., “Highly Reversible Tin Film Anode Guided via Interfacial Coordination Effect for High Energy Aqueous Acidic Batteries,” Advanced Materials 36 (2024): 2408067.

[61] J. Wang, S. K. Catalina, Z. Jiang, et al., “A Reversible Four-Electron Sn Metal Aqueous Battery,” Joule 8 (2024): 3386–3396.

[62] S. Chang, W. Hou, A. Del Valle-Perez, et al., “A Low-Acidity Chloride Electrolyte Enables Exceptional Reversibility and Stability in Aqueous Tin Metal Batteries,” Angewandte Chemie International Edition 64 (2025): e202414346.

[63] X. Lan, Z. Zhang, G. Liao, et al., “Recent Advances in Metallic Tin Anodes: An Emerging Field of Rechargeable Aqueous Batteries,” ACS Applied Materials & Interfaces 17 (2025): 24763–24777.

[64] H. Zhang, D. J. Liu, K. Xu, and Y. S. Meng, “Challenges and Opportunities for Rechargeable Aqueous Sn Metal Batteries,” Advanced Materials 37 (2025): 2417757.

[65] M. Gao, R. Wang, X. Lu, Y. Fan, Z. Guo, and Y. Wang, “A Highly Reversible Sn–Air Battery Possessing the Ultra-Low Charging Potential With the Assistance of Light,” Angewandte Chemie International Edition 63 (2024): e202407856.

[66] M. Xu, J. Chen, Y. Zhang, B. Raza, C. Lai, and J. Wang, “Electrolyte Design Strategies Towards Long-Term Zn Metal Anode for Rechargeable Batteries,” Journal of Energy Chemistry 73 (2022): 575–587.

[67] F.-Q. Xue, Y.-L. Wang, W.-H. Wang, and X.-D. Wang, “Investigation on the Electrode Process of the Mn(II)/Mn(III) Couple in Redox Flow Battery,” Electrochimica Acta 53 (2008): 6636–6642.

[68] C. Xie, T. Li, C. Deng, Y. Song, H. Zhang, and X. Li, “A Highly Reversible Neutral Zinc/Manganese Battery for Stationary Energy Storage,” Energy & Environmental Science 13 (2020): 135–143.

[69] A. R. Mainar, J. A. Blázquez, D. Frattini, et al., “High Performance Carbon Free Bifunctional Air Electrode for Advanced Zinc–Air Batteries,” Electrochimica Acta 446 (2023): 142075.

[70] Y. Han, Y. Zhao, and Y. Yu, “Research Progress of Zn–Air Batteries Suitable for Extreme Temperatures,” Energy Storage Materials 69 (2024): 103429.

[71] Z. P. Cano, M. G. Park, D. U. Lee, et al., “New Interpretation of the Performance of Nickel-Based Air Electrodes for Rechargeable Zinc–Air Batteries,” Journal of Physical Chemistry C 122 (2018): 20153–20166.

[72] T. Wang, M. Kunimoto, T. Mori, et al., “Carbonate Formation on Carbon Electrode in Rechargeable Zinc–Air Battery Revealed by In-Situ Raman Measurements,” Journal of Power Sources 533 (2022): 231237.

[73] Z. Zheng, X. Zhong, Q. Zhang, et al., “An Extended Substrate Screening Strategy Enabling a Low Lattice Mismatch for Highly Reversible Zinc Anodes,” Nature Communications 15 (2024): 753.

[74] Z. Li, Y. Wang, H. Liu, et al., “Electroreduction-Driven Distorted Nanotwins Activate Pure Cu for Efficient Hydrogen Evolution,” Nature Materials 24 (2025): 424–432.

[75] S. Liang, Y. J. Cheng, J. Zhu, Y. Xia, and P. Müller-Buschbaum, “A Chronicle Review of Nonsilicon (Sn, Sb, Ge)-Based Lithium/Sodium-Ion Battery Alloying Anodes,” Small Methods 4 (2020): 2000218.

[76] M. Gan, M. Zhu, J. Tu, X. Wang, and C. Gu, “Phytic-Acid-Modified Copper Foil as a Current Collector for Lithium-Ion Batteries,” Metals 14 (2024): 247.

[77] R. Lin, S. Zhang, Z. Du, H. Fang, Y. Ren, and X. Wu, “Copper Nanowires Based Current Collector for Light-Weight and Flexible Composite Silicon Anode With High Stability and Specific Capacity,” RSC Advances 5 (2015): 87090–87097.

[78] S. Chang, L. Lu, I. Ullah, et al., “Copper Foil Substrate Enables Planar Indium Plating for Ultrahigh-Efficiency and Long-Lifespan Aqueous Trivalent Metal Batteries,” Advanced Functional Materials 34 (2024): 2407342.

[79] G. Liu, S. Zhang, X. Wu, and R. Lin, “Fabrication of Rutile TiO₂ Nanorod Arrays on a Copper Substrate for High-Performance Lithium-Ion Batteries,” RSC Advances 6 (2016): 55671–55675.

[80] H. Li, C. Han, Y. Huang, et al., “An Extremely Safe and Wearable Solid-State Zinc Ion Battery Based on a Hierarchical Structured Polymer Electrolyte,” Energy & Environmental Science 11 (2018): 941–951.

[81] W. Chen, G. Li, A. Pei, et al., “A Manganese–Hydrogen Battery With Potential for Grid-Scale Energy Storage,” Nature Energy 3 (2018): 428–435.

[82] M. Li, Q. He, Z. Li, et al., “A Novel Dendrite-Free Mn²⁺/Zn²⁺ Hybrid Battery With 2.3 V Voltage Window and 11000-cycle Lifespan,” Advanced Energy Materials 9 (2019): 1901469.

[83] S. Bi, S. Wang, F. Yue, Z. Tie, and Z. Niu, “A Rechargeable Aqueous Manganese-Ion Battery Based on Intercalation Chemistry,” Nature Communications 12 (2021): 6991.

[84] C. Wang, Y. Zeng, X. Xiao, et al., “γ-MnO₂ Nanorods/Graphene Composite as Efficient Cathode for Advanced Rechargeable Aqueous Zinc-Ion Battery,” Journal of Energy Chemistry 43 (2020): 182–187.

[85] M. Wang, X. Zheng, X. Zhang, et al., “Opportunities of Aqueous Manganese-Based Batteries With Deposition and Stripping Chemistry,” Advanced Energy Materials 11 (2021): 2002904.

[86] D. Wang, L. Wang, G. Liang, et al., “A Superior δ-MnO₂ Cathode and a Self-Healing Zn-δ-MnO₂ Battery,” ACS Nano 13 (2019): 10643–10652.

[87] J. Yao, X. Wang, P. Hu, et al., “Local Electron Spin-State Modulation at Mn Site for Advanced Sodium-Ion Batteries With Fast-Kinetic Na-Ni_0.33Fe_0.33Mn_0.33O₂ Cathode,” Advanced Functional Materials 34 (2024): 2419967.

[88] Z. Zhang, J. Zheng, X. Chen, et al., “Achieving Ultra-Long Cycling Life for MnO₂ Cathode: Modulating Mn³⁺ Spin State to Suppress Jahn–Teller Distortion and Manganese Dissolution,” Energy Storage Materials 76 (2025): 104128.

[89] S. S. Hassan Zaidi, S. Rajendran, A. Sekar, A. Elangovan, J. Li, and X. Li, “Binder-Free Li–O₂ Battery Cathodes Using Ni- and PtRu-Coated Vertically Aligned Carbon Nanofibers as Electrocatalysts for Enhanced Stability,” Nano Research Energy 2 (2023): e9120055.

[90] Z. Guo, S. Zhao, T. Li, D. Su, S. Guo, and G. Wang, “Recent Advances in Rechargeable Magnesium-Based Batteries for High-Efficiency Energy Storage, Advanced Energy,” Materials 10 (2020): 1903591.

[91] H. Li, F. Wang, C. Zhang, et al., “A Temperature-Sensitive Poly(3-octylpyrrole)/Carbon Composite as a Conductive Matrix of Cathodes for Building Safer Li-Ion Batteries,” Energy Storage Materials 17 (2019): 275–283.

[92] H. W. Park, D. U. Lee, P. Zamani, M. H. Seo, L. F. Nazar, and Z. Chen, “Electrospun Porous Nanorod Perovskite Oxide/Nitrogen-Doped Graphene Composite as a Bi-Functional Catalyst for Metal Air Batteries,” Nano Energy 10 (2014): 192–200.

[93] J. Guo, L. Kang, X. Lu, et al., “Self-Activated Cathode Substrates in Rechargeable Zinc–Air Batteries,” Energy Storage Materials 35 (2021): 530–537.

[94] R. Cao, J. S. Lee, M. Liu, and J. Cho, “Recent Progress in Non-Precious Catalysts for Metal–Air Batteries,” Advanced Energy Materials 2 (2012): 816–829.

[95] Y. Liu, Z. Chen, Z. Li, et al., “Coni Nanoalloy–Co–N₄ Composite Active Sites Embedded in Hierarchical Porous Carbon as Bi-Functional Catalysts for Flexible Zn–Air Battery,” Nano Energy 99 (2022): 107325.

[96] M. Xiong and D. G. Ivey, “Synthesis of Bifunctional Catalysts for Metal–Air Batteries Through Direct Deposition Methods,” Batteries & Supercaps 2 (2019): 326–335.

[97] Q. Zhang, Z. Zheng, R. Gao, et al., “Constructing Bipolar Dual-Active Sites Through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox,” Advanced Materials 36 (2024): 2401018.

[98] Z. Cai, M. Xu, Y. Li, et al., “Photo-Promoted Rapid Reconstruction Induced Alterations in Active Site of Ag@Amorphous NiFe Hydroxides for Enhanced Oxygen Evolution Reaction,” Carbon Energy 6 (2024): e543.

[99] M. Chen, R. Abazari, S. Sanati, et al., “Compositional Engineering of HKUST-1/sulfidized NiMn-LDH on Functionalized MWCNTs as Remarkable Bifunctional Electrocatalysts for Water Splitting,” Carbon Energy 5 (2023): e459.

[100] R. Ren, G. Liu, J. Y. Kim, et al., “Photoactive g-C₃N₄/CuZIF-67 Bifunctional Electrocatalyst With Staggered P–N Heterojunction for Rechargeable Zn–Air Batteries,” Applied Catalysis, B: Environmental 306 (2022): 121096.

[101] J. Li, K. Zhang, B. Wang, and H. Peng, “Light-Assisted Metal–Air Batteries: Progress, Challenges, and Perspectives,” Angewandte Chemie 134 (2022): e202213026.

[102] J. Chen, Z. Liu, K. Feng, F. Deng, and Y. Yu, “Electrostatically Connected Fe₂O₃@Ni-MOF Nanosheet Array Heterojunction for High-Performance Light-Assisted Zinc–Air Batteries,” Composites, Part B: Engineering 289 (2025): 111936.

[103] F. Zhao, K. Yang, Y. Liu, et al., “Developing a Multifunctional Cathode for Photoassisted Lithium–Sulfur Battery,” Advanced Science 11 (2024): 2402978.

[104] Y. Zhang, Y. Han, F. Deng, et al., “Enhancement of the Performance of Ge–Air Batteries Under High Temperatures Using Conductive MOF-Modified Ge Anodes,” Carbon Energy 6 (2024): e580.

[105] K. Jin and Y. Yu, “Principles, Progress, and Prospects of Photo-Rechargeable Zinc-Ion Batteries,” Journal of Energy Chemistry 104 (2025): 382–396.

[106] M. Li, X. Wang, F. Li, L. Zheng, J. Xu, and J. Yu, “A Bifunctional Photo-Assisted Li–O₂ Battery Based on a Hierarchical Heterostructured Cathode,” Advanced Materials 32 (2020): 1907098.

[107] M. Wang, J. Chen, Z. Tian, et al., “Facet-Controlled Bifunctional WO₃ Photocathodes for High-Performance Photo-Assisted Li–O₂ Batteries,” Energy & Environmental Science 16 (2023): 523–534.

[108] J. Chen, J. Luo, Y. Xiang, and Y. Yu, “Light-Assisted Rechargeable Zinc–Air Battery: Mechanism, Progress, and Prospects,” Journal of Energy Chemistry 91 (2024): 178–193.

[109] S. Liang, L. J. Zheng, L. N. Song, X. X. Wang, W. B. Tu, and J. J. Xu, “Accelerated Confined Mass Transfer of MoS₂ 1D Nanotube in Photo-Assisted Metal–Air Batteries,” Advanced Materials 36 (2024): 2307790.

[110] X.-X. Wang, D.-H. Guan, C.-L. Miao, D.-C. Kong, L.-J. Zheng, and J.-J. Xu, “Metal–Organic Framework-Based Mixed Conductors Achieve Highly Stable Photo-Assisted Solid-State Lithium–Oxygen Batteries,” Journal of the American Chemical Society 145 (2023): 5718–5729.

[111] D. Bu, M. Batmunkh, Y. Zhang, et al., “Rechargeable Sunlight-Promoted Zn–Air Battery Constructed by Bifunctional Oxygen Photoelectrodes: Energy-Band Switching Between ZnO/Cu₂O and ZnO/CuO in Charge–Discharge Cycles,” Chemical Engineering Journal 433 (2022): 133559.

[112] Z. Zhu, Q. Lv, Y. Ni, et al., “Internal Electric Field and Interfacial Bonding Engineered Step-Scheme Junction for a Visible-Light-Involved Lithium–Oxygen Battery,” Angewandte Chemie 134 (2022): e202116699.

[113] Y. He, M. Gao, W. Wang, et al., “Oriented Assembly of Unique Mesoporous Titania Conoids for Photo-Assisted Sn–Air Battery,” Advanced Functional Materials 35 (2025): 2424225.

[114] K. Tang, H. Hu, Y. Xiong, et al., “Hydrophobization Engineering of the Air–Cathode Catalyst for Improved Oxygen Diffusion Towards Efficient Zinc–Air Batteries,” Angewandte Chemie International Edition 61 (2022): e202202671.

[115] Q. Cao, L. Wan, Z. Xu, et al., “A Fluorinated Covalent Organic Framework With Accelerated Oxygen Transfer Nanochannels for High-Performance Zinc–Air Batteries,” Advanced Materials 35 (2023): 2210550.

[116] M. Sun, Z. Wang, J. Jiang, X. Wang, and C. Yu, “Gelation Mechanisms of Gel Polymer Electrolytes for Zinc-Based Batteries,” Chinese Chemical Letters 35 (2024): 109393.

[117] D. Ruiz, V. F. Michel, M. Niederberger, and E. Lizundia, “Chitin Nanofibrils From Fungi for Hierarchical Gel Polymer Electrolytes for Transient Zinc-Ion Batteries With Stable Zn Electrodeposition,” Small 19 (2023): 2303394.

[118] W. Zeng, S. Zhang, J. Lan, et al., “Double Network Gel Electrolyte With High Ionic Conductivity and Mechanical Strength for Zinc-Ion Batteries,” ACS Nano 18 (2024): 26391–26400.

[119] C. Liu, X. Xie, B. Lu, J. Zhou, and S. Liang, “Electrolyte Strategies Toward Better Zinc-Ion Batteries,” ACS Energy Letters 6 (2021): 1015–1033.

[120] Y. Yang, J. Ding, J. Poisson, et al., “Design of Hydrogel Electrolytes Using Strong Bacterial Cellulose With Weak Ionic Interactions,” ACS Nano 19 (2025): 15963–15973.

[121] Y. Wang, B. Liang, D. Li, et al., “Hydrogel Electrolyte Design for Long-Lifespan Aqueous Zinc Batteries to Realize a 99% Coulombic Efficiency at 90°C,” Joule 9 (2025): 101944.

[122] T. Zhang, Y. Tang, S. Guo, et al., “Fundamentals and Perspectives in Developing Zinc-Ion Battery Electrolytes: A Comprehensive Review,” Energy & Environmental Science 13 (2020): 4625–4665.

[123] S. Chen, M. Zhang, P. Zou, B. Sun, and S. Tao, “Historical Development and Novel Concepts on Electrolytes for Aqueous Rechargeable Batteries,” Energy & Environmental Science 15 (2022): 1805–1839.

[124] D. Pinheiro, M. Pineiro, and J. S. S. De Melo, “Sulfonated Tryptanthrin Anolyte Increases Performance in pH Neutral Aqueous Redox Flow Batteries,” Communications Chemistry 4 (2021): 89.

[125] P. Zhu, J. Tang, Q. Tao, et al., “The Kinetics Study of Dissolving SnPb Solder by Hydrometallurgy,” Environmental Engineering Science 36 (2019): 1236–1243.

[126] S. Kim, J. Lee, J. Jeong, and K. Yoo, “The Effect of Oxygen and Hydroxide Ion on Electrochemical Leaching Behavior of Tin,” Materials Transactions 53 (2012): 2208–2210.

[127] F. F. Oplinger and F. Bauch, “Alkaline Tin Plating,” Transactions of the Electrochemical Society 80 (1941): 617–629.

[128] A. Palacios-Padrós, F. Caballero-Briones, I. Díez-Pérez, and F. Sanz, “Tin Passivation in Alkaline Media: Formation of SnO Microcrystals as Hydroxyl Etching Product,” Electrochimica Acta 111 (2013): 837–845.

[129] M. Tao, J. Chen, H. Lin, et al., “Recent Advances in Quantifying the Inactive Lithium and Failure Mechanism of Li Anodes in Rechargeable Lithium Metal Batteries,” Journal of Energy Chemistry 96 (2024): 226–248.

[130] X. Zhang, Y. Li, H. Zhang, and G. Li, “Fast Capture and Stabilization of Li-Ions via Physicochemical Dual Effects for an Ultra-Stable Self-Supporting Li Metal Anode,” Carbon Energy 5 (2023): e348.

[131] C. Jin, T. Liu, O. Sheng, et al., “Rejuvenating Dead Lithium Supply in Lithium Metal Anodes by Iodine Redox,” Nature Energy 6 (2021): 378–387.

[132] J. Chen, Z. Cheng, Y. Liao, L. Yuan, Z. Li, and Y. Huang, “Selection of Redox Mediators for Reactivating Dead Li in Lithium Metal Batteries,” Advanced Energy Materials 12 (2022): 2201800.

[133] Y. Zhao, K. Feng, and Y. Yu, “In Situ Preparation of Zincophilic Covalent–Organic Frameworks With Low Surface Work Function and High Rigidity to Stabilize Zinc Metal Anodes,” Journal of Energy Chemistry 102 (2025): 524–533.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.