Three-Stage Heat Transfer Pathways in the Latent Heat Thermal Energy Storage System With Solid–Liquid Phase-Change Materials

Abstract

The latent heat thermal energy storage system with solid–liquid phase-change material (SLPCM-LHTES) as energy storage medium provides outstanding advantages such as system simplicity, stable temperature control, and high energy storage density, showing great potential toward addressing the energy storage problems associated with decentralized, intermittent, and unstable renewable energy sources. Notably, effective heat transfer within the SLPCM-LHTES is crucial for extending its application potential. Therefore, a comprehensive understanding of the heat transfer processes in SLPCM-LHTES from a theoretical perspective is necessary. In this review, we propose a three-stage heat transfer pathway in SLPCM-LHTES, including external heating, interfacial heat transfer, and intrinsic phase transition processes. From the perspective of this three-stage pathway, the theoretical basis of heat transfer processes and typical efficiency enhancement strategies in SLPCM-LHTES are summarized. Moreover, an overview of the typical applications of SLPCM-LHTES in various fields, such as building energy efficiency, textiles and garments, and battery thermal management, is presented. Finally, the remaining challenges and possible avenues of research in this burgeoning field will also be discussed.

Keywords

heat transfer efficiency / latent heat thermal energy storage / phase-change material / three-stage heat transfer pathway

References

[1] H. Fang, Y. Zhou, X. Peng, et al., “Challenges and Prospects in Artificial Nitrogen Cycle for Energy Decarbonization,” National Science Open 2, no. 2 (2023): 20220040.

[2] Z. Meng, Z. Qiu, Y. Shi, et al., “Micro/Nano Metal–Organic Frameworks Meet Energy Chemistry: A Review of Materials Synthesis and Applications,” eScience 3, no. 2 (2023): 100092.

[3] S. Wang, J. He, Q. Li, et al., “Highly Elastic Energy Storage Device Based on Intrinsically Super-Stretchable Polymer Lithium-Ion Conductor With High Conductivity,” Fundamental Research 4, no. 1 (2024): 140–146.

[4] R. Zhang, Z. Xu, Z. Hao, Z. Meng, X. Hao, and H. Tian, “Research Advances of Metal Fluoride for Energy Conversion and Storage,” Carbon Energy 7, no. 1 (2025): e630.

[5] C. Chabot and L. Gosselin, “Solid-Liquid Phase Change Around a Tube With Periodic Heating and Cooling: Scale Analysis, Numerical Simulations and Correlations,” International Journal of Thermal Sciences 112 (2017): 345–357.

[6] M. Tawalbeh, H. A. Khan, A. Al-Othman, F. Almomani, and S. Ajith, “A Comprehensive Review on the Recent Advances in Materials for Thermal Energy Storage Applications,” International Journal of Thermofluids 18 (2023): 100326.

[7] Z. Hu, Y. Zou, C. Xiang, et al., “Stabilized Multifunctional Phase Change Materials Based on Carbonized Cu-Coated Melamine Foam/Reduced Graphene Oxide Framework for Multiple Energy Conversion and Storage,” Carbon Energy 4, no. 6 (2022): 1214–1227.

[8] M. M. Farid, A. M. Khudhair, S. A. K. Razack, and S. Al-Hallaj, “A Review on Phase Change Energy Storage: Materials and Applications,” Energy Conversion and Management 45, no. 9 (2004): 1597–1615.

[9] K. Velmurugan, S. Kumarasamy, T. Wongwuttanasatian, and V. Seithtanabutara, “Review of PCM Types and Suggestions for an Applicable Cascaded PCM for Passive PV Module Cooling Under Tropical Climate Conditions,” Journal of Cleaner Production 293 (2021): 126065.

[10] F. L. Rashid, M. A. Al-Obaidi, N. S. Dhaidan, et al., “Bio-Based Phase Change Materials for Thermal Energy Storage and Release: A Review,” Journal of Energy Storage 73 (2023): 109219.

[11] X. Wu, C. Li, Z. Zhang, et al., “Nitrogen-Doped Microporous Graphite-Enhanced Copper Plasmonic Effect for Solar Evaporation,” Carbon Energy 6, no. 3 (2024): 466.

[12] N. I. Ibrahim, F. A. Al-Sulaiman, S. Rahman, B. S. Yilbas, and A. Z. Sahin, “Heat Transfer Enhancement of Phase Change Materials for Thermal Energy Storage Applications: A Critical Review,” Renewable and Sustainable Energy Reviews 74 (2017): 26–50.

[13] M. M. Kenisarin, K. Mahkamov, S. C. Costa, and I. Makhkamova, “Melting and Solidification of PCMs Inside a Spherical Capsule: A Critical Review,” Journal of Energy Storage 27 (2020): 101082.

[14] S. Jegadheeswaran and S. D. Pohekar, “Performance Enhancement in Latent Heat Thermal Storage System: A Review,” Renewable and Sustainable Energy Reviews 13, no. 9 (2009): 2225–2244.

[15] V. R. Voller, M. Cross, and N. C. Markatos, “An Enthalpy Method for Convection/Diffusion Phase Change,” International Journal for Numerical Methods in Engineering 24, no. 1 (1987): 271–284.

[16] A. Prasad and S. Sengupta, “Numerical Investigation of Melting Inside a Horizontal Cylinder Including the Effects of Natural Convection,” Journal of Heat Transfer 109, no. 3 (1987): 803–806.

[17] N. W. Hale and R. Viskanta, “Photographic Observation of the Solid-Liquid Interface Motion During Melting of a Solid Heated From an Isothermal Vertical Wall,” Letters in Heat & Mass Transfer 5, no. 6 (1978): 329–337.

[18] E. M. Sparrow, R. R. Schmidt, and J. W. Ramsey, “Experiments on the Role of Natural Convection in the Melting of Solids,” Journal of Heat Transfer 100, no. 1 (1978): 11–16.

[19] F. E. Moore and Y. Bayazitoglu, “Melting Within a Spherical Enclosure,” ASME Journal of Heat and Mass Transfer 104, no. 1 (1982): 19–23.

[20] A. D. Brent, V. R. Voller, K. J. Reid, A. D. Brent, V. R. Voller, and K. J. Reid, “Enthalpy-Porosity Technique for Modeling Convection-Diffusion Phase Change: Application to the Melting of a Pure Metal,” Numerical Heat Transfer, Part B: Fundamentals 13, no. 3 (1988): 297–318.

[21] C. Chen, H. Guo, Y. Liu, H. Yue, and C. Wang, “A New Kind of Phase Change Material (PCM) for Energy-Storing Wallboard,” Energy and Buildings 40, no. 5 (2008): 882–890.

[22] A. F. Elmozughi, L. Solomon, A. Oztekin, and S. Neti, “Encapsulated Phase Change Material for High Temperature Thermal Energy Storage—Heat Transfer Analysis,” International Journal of Heat and Mass Transfer 78 (2014): 1135–1144.

[23] T. S. Saitoh and A. Hoshi, “Experimental Investigation on Combined Close-Contact and Natural Convection Melting in Horizontal Cylindrical and Spherical Capsules,” in Proceedings of the IECEC 96 Proceedings of the 31st Intersociety Energy Conversion Engineering Conference, February 11–August 16 (1996).

[24] Y. Wang, A. Amiri, and K. Vafai, “An Experimental Investigation of the Melting Process in a Rectangular Enclosure,” International Journal of Heat and Mass Transfer 42, no. 19 (1999): 3659–3672.

[25] Y. Asako, M. Faghri, M. Charmchi, and P. A. Bahrami, “Numerical Solution for Melting of Unfixed Rectangular Phase-Change Material Under Low-Gravity Environment,” Numerical Heat Transfer, Part A: Applications 25, no. 2 (1994): 191–208.

[26] J. Duan, Y. Xiong, and D. Yang, “On the Melting Process of the Phase Change Material in Horizontal Rectangular Enclosures,” Energies 12, no. 16 (2019): 3100.

[27] Y. K. Wu and M. Lacroix, “Melting of a PCM Inside a Vertical Cylindrical Capsule,” International Journal for Numerical Methods in Fluids 20, no. 6 (1995): 559–572.

[28] F. L. Tan, “Constrained and Unconstrained Melting Inside a Sphere,” International Communications in Heat and Mass Transfer 35, no. 4 (2008): 466–475.

[29] J. Zhou, Z. Chen, D. Liu, and J. Li, “Experimental Study on Melting in a Rectangular Enclosure Heated Below With Discrete Heat Sources,” Journal of Thermal Science 10, no. 3 (2001): 254–259.

[30] B. Kamkari, H. Shokouhmand, and F. Bruno, “Experimental Investigation of the Effect of Inclination Angle on Convection-Driven Melting of Phase Change Material in a Rectangular Enclosure,” International Journal of Heat and Mass Transfer 72 (2014): 186–200.

[31] B. W. Webb and R. Viskanta, “Natural-Convection-Dominated Melting Heat Transfer in an Inclined Rectangular Enclosure,” International Journal of Heat and Mass Transfer 29, no. 2 (1986): 183–192.

[32] A. M. Elshaer, A. M. A. Soliman, M. Kassab, and A. A. Hawwash, “Boosting the Thermal Management Performance of a PCM-Based Module Using Novel Metallic Pin Fin Geometries: Numerical Study,” Scientific Reports 13, no. 1 (2023): 10955.

[33] G. A. Lane, Solar Heat Storage: Latent Heat Materials (CRC Press, 1983).

[34] S. F. Hosseinizadeh, A. A. R. Darzi, and F. L. Tan, “Numerical Investigations of Unconstrained Melting of Nano-Enhanced Phase Change Material (NEPCM) Inside a Spherical Container,” International Journal of Thermal Sciences 51 (2012): 77–83.

[35] V. De Matteis, A. Cannavale, F. Martellotta, et al., “Nano-Encapsulation of Phase Change Materials: From Design to Thermal Performance, Simulations and Toxicological Assessment,” Energy and Buildings 188–189 (2019): 1–11.

[36] E. Sparrow and T. Myrum, Inclination-Induced Direct-Contact Melting in a Circular Tube,” ASME Journal of Heat and Mass Transfer 107, no. 3 (1985): 533–540.

[37] M. K. Moallemi and R. Viskanta, “Experiments on Fluid Flow Induced by Melting Around a Migrating Heat Source,” Journal of Fluid Mechanics 157 (1985): 35–51.

[38] M. Bareiss and H. Beer, “An Analytical Solution of the Heat Transfer Process During Melting of an Unfixed Solid Phase Change Material Inside a Horizontal Tube,” International Journal of Heat and Mass Transfer 27, no. 5 (1984): 739–746.

[39] M. Bareiss and H. Beer, “Experimental Investigation of Melting Heat Transfer With Regard to Different Geometric Arrangements,” International Communications in Heat and Mass Transfer 11, no. 4 (1984): 323–333.

[40] J. Zhao, J. Zhai, Y. Lu, and N. Liu, “Theory and Experiment of Contact Melting of Phase Change Materials in a Rectangular Cavity at Different Tilt Angles,” International Journal of Heat and Mass Transfer 120 (2018): 241–249.

[41] N. W. Hale and R. Viskanta, “Solid-Liquid Phase-Change Heat Transfer and Interface Motion in Materials Cooled or Heated From Above or Below,” International Journal of Heat and Mass Transfer 23, no. 3 (1980): 283–292.

[42] V. Voile and C. Prakash, “A Fixed Grid Numerical Modeling Methodology for Convection Diffusion Mushy Region Phase-Change Problem,” International Journal Heat Mass Transfer 30, no. 9 (1987): 1709–1719.

[43] Z. X. Gong and A. S. Mujumdar, “A Finite Element Model for Convection-Dominated Melting and Solidification Problems,” International Journal of Numerical Methods for Heat & Fluid Flow 8, no. 4 (1998): 393–408.

[44] Z. Chen and G. Fang, “Preparation and Heat Transfer Characteristics of Microencapsulated Phase Change Material Slurry: A Review,” Renewable and Sustainable Energy Reviews 15, no. 9 (2011): 4624–4632.

[45] M. Bechiri and K. Mansouri, “Study of Heat and Fluid Flow During Melting of PCM Inside Vertical Cylindrical Tube,” International Journal of Thermal Sciences 135 (2019): 235–246.

[46] Y. Li, S. Yu, P. Chen, R. Rojas, A. Hajian, and L. Berglund, “Cellulose Nanofibers Enable Paraffin Encapsulation and the Formation of Stable Thermal Regulation Nanocomposites,” Nano Energy 34 (2017): 541–548.

[47] J. Singh, J. R. Vennapusa, and S. Chattopadhyay, “Protein-Polysaccharide Based Microencapsulated Phase Change Material Composites for Thermal Energy Storage,” Carbohydrate Polymers 229 (2020): 115531.

[48] C. Liu, Z. Ma, J. Wang, Y. Li, and Z. Rao, “Experimental Research on Flow and Heat Transfer Characteristics of Latent Functional Thermal Fluid With Microencapsulated Phase Change Materials,” International Journal of Heat and Mass Transfer 115 (2017): 737–742.

[49] H. Liao, S. Guo, Y. Liu, and Q. Wang, “Form-Stable Phase Change Composites With High Thermal Conductivity and Adjustable Thermal Management Capacity,” Solar Energy Materials and Solar Cells 221 (2021): 110881.

[50] A. Abdou and I. Budaiwi, “The Variation of Thermal Conductivity of Fibrous Insulation Materials Under Different Levels of Moisture Content,” Construction and Building Materials 43 (2013): 533–544.

[51] G. E. Timbers, G. D. Robertson, and T. A. Gochnauer, “Thermal Properties of Beeswax and Beeswax-Paraffin Mixtures,” Journal of Apicultural Research 16, no. 1 (1977): 49–55.

[52] F. Agyenim, N. Hewitt, P. Eames, and M. Smyth, “A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS),” Renewable and Sustainable Energy Reviews 14, no. 2 (2010): 615–628.

[53] T. Saitoh and A. Hoshi, “Analysis of Close-Contact Melting With Inner Wall Temperature Variation in a Horizontal Cylindrical Capsule; Proceedings of the IECEC-97,” in Proceedings of the Thirty-Second Intersociety Energy Conversion Engineering Conference (Cat No 97CH6203) (IEEE, 1997).

[54] T. Kawanami, S. Fukusako, and M. Yamada, “Experiments on Melting of Slush Ice in a Horizontal Cylindrical Capsule,” International Journal of Heat and Mass Transfer 42, no. 15 (1998): 2981–2990.

[55] B. Zivkovic and I. Fujii, “An Analysis of Isothermal Phase Change of Phase Change Material Within Rectangular and Cylindrical Containers,” Solar Energy 70, no. 1 (2001): 51–61.

[56] C. Gau and R. Viskanta, “Effect of Natural Convection on Solidification From Above and Melting From Below of a Pure Metal,” International Journal of Heat & Mass Transfer 28, no. 3 (1985): 573–587.

[57] A. R. Archibold, J. Gonzalez-Aguilar, M. M. Rahman, D. Yogi Goswami, M. Romero, and E. K. Stefanakos, “The Melting Process of Storage Materials With Relatively High Phase Change Temperatures in Partially Filled Spherical Shells,” Applied Energy 116 (2014): 243–252.

[58] E. Assis, L. Katsman, G. Ziskind, and R. Letan, “Numerical and Experimental Study of Melting in a Spherical Shell,” International Journal of Heat and Mass Transfer 50, no. 9–10 (2007): 1790–1804.

[59] W. Li, S.-G. Li, S. Guan, Y. Wang, X. Zhang, and X. Liu, “Numerical Study on Melt Fraction During Melting of Phase Change Material Inside a Sphere,” International Journal of Hydrogen Energy 42, no. 29 (2017): 18232–18239.

[60] B. J. Jones, D. Sun, S. Krishnan, and S. V. Garimella, “Experimental and Numerical Study of Melting in a Cylinder,” International Journal of Heat and Mass Transfer 49, no. 15–16 (2006): 2724–2738.

[61] H. Sattari, A. Mohebbi, M. M. Afsahi, and A. Azimi Yancheshme, “CFD Simulation of Melting Process of Phase Change Materials (PCMs) in a Spherical Capsule,” International Journal of Refrigeration 73 (2017): 209–218.

[62] P. Jany and A. Bejan, “Scaling Theory of Melting With Natural Convection in an Enclosure,” International Journal of Heat & Mass Transfer 31, no. 6 (1988): 1221–1235.

[63] A. K. Yadav, T. Donepudi, and B. S. Siddani, “Numerical and Experimental Investigation of Melting Characteristics of Phase Change Material-RT58,” Thermal Science and Engineering Progress 17 (2020): 100378.

[64] T. Hirata, Y. Makino, and Y. Kaneko, “Analysis of Close-Contact Melting for Octadecane and Ice Inside Isothermally Heated Horizontal Rectangular Capsule,” International Journal of Heat and Mass Transfer 34 (1991): 3097–3106.

[65] Y. Kozak and G. Ziskind, “Novel Enthalpy Method for Modeling of PCM Melting Accompanied by Sinking of the Solid Phase,” International Journal of Heat and Mass Transfer 112 (2017): 568–586.

[66] C. Pan, J. Charles, N. Vermaak, et al., “Experimental, Numerical and Analytic Study of Unconstrained Melting in a Vertical Cylinder With a Focus on Mushy Region Effects,” International Journal of Heat and Mass Transfer 124 (2018): 1015–1024.

[67] S. Ebadi, S. H. Tasnim, A. A. Aliabadi, and S. Mahmud, “Melting of Nano-PCM Inside a Cylindrical Thermal Energy Storage System: Numerical Study With Experimental Verification,” Energy Conversion and Management 166 (2018): 241–259.

[68] Z. Yan, T. Yang, S. Li, Z. Yang, Z. Yu, and G. Zhang, “Unconstrained Melting of Phase Change Material in Cylindrical Containers Inside Hot Water Tanks: Numerical Investigation and Effect of Aspect Ratios,” Journal of Energy Storage 47 (2022): 103647.

[69] M. Z. M. Rizan, F. L. Tan, and C. P. Tso, “An Experimental Study of n-Octadecane Melting Inside a Sphere Subjected to Constant Heat Rate at Surface,” International Communications in Heat and Mass Transfer 39, no. 10 (2012): 1624–1630.

[70] M. Fadl and P. Eames, “A Numerical Investigation Into the Heat Transfer and Melting Process of Lauric Acid in a Rectangular Enclosure With Three Values of Wall Heat Flux,” Energy Procedia 158 (2019): 4502–4509.

[71] D. Pal and Y. K. Joshi, “Melting in a Side Heated Tall Enclosure by a Uniformly Dissipating Heat Source,” International Journal of Heat and Mass Transfer 44, no. 2 (2001): 375–387.

[72] V. Shatikian, G. Ziskind, and R. Letan, “Numerical Investigation of a PCM-Based Heat Sink With Internal Fins: Constant Heat Flux,” International Journal of Heat and Mass Transfer 51, no. 5–6 (2008): 1488–1493.

[73] M. Fadl and P. C. Eames, “A Comparative Study of the Effect of Varying Wall Heat Flux on Melting Characteristics of Phase Change Material RT44HC in Rectangular Test Cells,” International Journal of Heat and Mass Transfer 141 (2019): 731–747.

[74] A. S. Soliman, S. Zhu, L. Xu, J. Dong, and P. Cheng, “Numerical Simulation and Experimental Verification of Constrained Melting of Phase Change Material in Cylindrical Enclosure Subjected to a Constant Heat Flux,” Journal of Energy Storage 35 (2021): 102312.

[75] A. S. Soliman, S. Zhu, L. Xu, J. Dong, and P. Cheng, “Melting Enhancement of Nano-Phase Change Material in Cylindrical Enclosure Using Convex/Concave Dimples: Numerical Simulation With Experimental Validation,” Journal of Energy Storage 44 (2021): 103470.

[76] M. Akgün, O. Aydın, and K. Kaygusuz, “Experimental Study on Melting/Solidification Characteristics of a Paraffin as PCM,” Energy Conversion and Management 48, no. 2 (2007): 669–678.

[77] F. Agyenim, P. Eames, and M. Smyth, “A Comparison of Heat Transfer Enhancement in a Medium Temperature Thermal Energy Storage Heat Exchanger Using Fins,” Solar Energy 83, no. 9 (2009): 1509–1520.

[78] G.-S. Han, H.-S. Ding, Y. Huang, L. G. Tong, and Y. L. Ding, “A Comparative Study on the Performances of Different Shell-And-Tube Type Latent Heat Thermal Energy Storage Units Including the Effects of Natural Convection,” International Communications in Heat and Mass Transfer 88 (2017): 228–235.

[79] M. S. Mahdi, H. B. Mahood, A. F. Hasan, A. A. Khadom, and A. N. Campbell, “Numerical Study on the Effect of the Location of the Phase Change Material in a Concentric Double Pipe Latent Heat Thermal Energy Storage Unit,” Thermal Science and Engineering Progress 11 (2019): 40–49.

[80] R. Qi, Z. Wang, J. Ren, and Y. Wu, “Numerical Investigation on Heat Transfer Characteristics During Melting of Lauric Acid in a Slender Rectangular Cavity With Flow Boundary Condition,” International Journal of Heat and Mass Transfer 157 (2020): 119927.

[81] J. F. R. Junior, R. D. C. Oliveski, L. A. O. Rocha, and C. Biserni, “Numerical Investigation on Phase Change Materials (PCM): The Melting Process of Erythritol in Spheres Under Different Thermal Conditions,” International Journal of Mechanical Sciences 148 (2018): 20–30.

[82] P. Li, Z. Wang, Z. Liu, W. Heng, and H. Qin, “Convective Heat Transfer Mechanisms of Molten Phase Change Material in a Vertical Slender Rectangular Cavity: A Numerical Case Study,” Case Studies in Thermal Engineering 26 (2021): 101139.

[83] E. Alptekin, M. Özer, M. Top, et al., “A Numerical Study on Phase Change Inside a Spherical Capsule.” Exergetic, Energetic and Environmental Dimensions (Elsevier, 2018), 613–625.

[84] N. S. Dhaidan and A. F. Khalaf, “Experimental Evaluation of the Melting Behaviours of Paraffin Within a Hemicylindrical Storage Cell,” International Communications in Heat and Mass Transfer 111 (2020): 104476.

[85] Z. Gao, Y. Yao, and H. Wu, “A Visualization Study on the Unconstrained Melting of Paraffin in Spherical Container,” Applied Thermal Engineering 155 (2019): 428–436.

[86] S. Huang, J. Lu, Y. Li, et al., “Experimental Study on the Influence of PCM Container Height on Heat Transfer Characteristics Under Constant Heat Flux Condition,” Applied Thermal Engineering 172 (2020): 115159.

[87] A. F. Regin, S. C. Solanki, and J. S. Saini, “Experimental and Numerical Analysis of Melting of PCM Inside a Spherical Capsule,” in 9th AIAA/ASME Joint Thermophysics and Heat Transfer Conference (2006).

[88] W.-B. Ye, “Thermal and Hydraulic Performance of Natural Convection in a Rectangular Storage Cavity,” Applied Thermal Engineering 93 (2016): 1114–1123.

[89] E. Sparrow and J. Broadbent, “Inward Melting in a Vertical Tube Which Allows Free Expansion of the Phase-Change Medium,” Journal of Heat and Mass Transfer 104, no. 2 (1982): 309–315.

[90] T. Shockner and G. Ziskind, “Combined Close-Contact and Convective Melting in a Vertical Cylindrical Enclosure,” International Journal of Heat and Mass Transfer 177 (2021): 121492.

[91] B. Kamkari and H. J. Amlashi, “Numerical Simulation and Experimental Verification of Constrained Melting of Phase Change Material in Inclined Rectangular Enclosures,” International Communications in Heat and Mass Transfer 88 (2017): 211–219.

[92] A. R. Abdulmunem, P. M. Samin, H. A. Rahman, H. A. Hussien, I. I. Mazali, and H. Ghazali, “Experimental and Numerical Investigations on the Effects of Different Tilt Angles on the Phase Change Material Melting Process in a Rectangular Container,” Journal of Energy Storage 32 (2020): 101914.

[93] D. Liu, K. Xie, H. Zhang, et al., “Numerical Evaluation of Convective Heat Transfer Properties of Two-Dimensional Rotating PCM Melt in the Unilaterally Heated Rectangular Container,” Renewable Energy 193 (2022): 920–940.

[94] T. Sathe and A. S. Dhoble, “Experimental Investigations of Phase Change Material Filled Rectangular Enclosure With Inclined Top and Side Heating Mode,” Journal of Energy Storage 32 (2020): 101799.

[95] N. Kousha, M. J. Hosseini, M. R. Aligoodarz, R. Pakrouh, and R. Bahrampoury, “Effect of Inclination Angle on the Performance of a Shell and Tube Heat Storage Unit—An Experimental Study,” Applied Thermal Engineering 112 (2017): 1497–1509.

[96] A. S. Mallya and P. Srinivasan, “Numerical Simulations and Experimental Investigations to Study the Melting Behavior of Beeswax in a Cylindrical Container at Different Angular Positions,” Journal of Energy Storage 44 (2021): 103435.

[97] R. Y. Farsani, F. Raeiszadeh, M. Jahangiri, and M. Afrand, “Melting Characteristics of Paraffin Wax in a Rectangular Cavity Under Steady Rotations,” Journal of the Taiwan Institute of Chemical Engineers 113 (2020): 135–141.

[98] B. K. Choure, T. Alam, and R. Kumar, “Optimization of Heat Transfer in PCM Based Triple Tube Heat Exchanger Using Multitudinous Fins and Eccentric Tube,” Journal of Energy Storage 102 (2024): 113981.

[99] F. L. Rashid, N. S. Dhaidan, A. J. Mahdi, et al., “Heat Transfer Enhancement of Phase Change Materials Using Letters-Shaped Fins: A Review,” International Communications in Heat and Mass Transfer 159 (2024): 108096.

[100] Ç. Yıldız, M. Arıcı, S. Nižetić, and A. Shahsavar, “Numerical Investigation of Natural Convection Behavior of Molten PCM in an Enclosure Having Rectangular and Tree-Like Branching Fins,” Energy 207 (2020): 118223.

[101] M. Alizadeh, M. H. Pahlavanian, M. Tohidi, and D. D. Ganji, “Solidification Expedition of Phase Change Material in a Triplex-Tube Storage Unit via Novel Fins and SWCNT Nanoparticles,” Journal of Energy Storage 28 (2020): 101188.

[102] M. Sheikholeslami, S. Lohrasbi, and D. D. Ganji, “Response Surface Method Optimization of Innovative Fin Structure for Expediting Discharging Process in Latent Heat Thermal Energy Storage System Containing Nano-Enhanced Phase Change Material,” Journal of the Taiwan Institute of Chemical Engineers 67 (2016): 115–125.

[103] S. Wu, Y. Huang, C. Zhang, and Y. Chen, “Role of Tree-Shaped Fins in Charging Performance of a Latent Heat Storage Unit,” International Journal of Energy Research 44, no. 6 (2020): 4800–4811.

[104] L. Pu, S. Zhang, L. Xu, and Y. Li, “Thermal Performance Optimization and Evaluation of a Radial Finned Shell-and-Tube Latent Heat Thermal Energy Storage Unit,” Applied Thermal Engineering 166 (2020): 114753.

[105] T. Bouhal, S. Ed-Dîn fertahi, T. Kousksou, and A. Jamil, “CFD Thermal Energy Storage Enhancement of PCM Filling a Cylindrical Cavity Equipped With Submerged Heating Sources,” Journal of Energy Storage 18 (2018): 360–370.

[106] D. S. Mehta, B. Vaghela, M. K. Rathod, and J. Banerjee, “Thermal Performance Augmentation in Latent Heat Storage Unit Using Spiral Fin: An Experimental Analysis,” Journal of Energy Storage 31 (2020): 101776.

[107] B. Kamkari and H. Shokouhmand, “Experimental Investigation of Phase Change Material Melting in Rectangular Enclosures With Horizontal Partial Fins,” International Journal of Heat and Mass Transfer 78 (2014): 839–851.

[108] C. Ji, Z. Qin, Z. Low, S. Dubey, F. H. Choo, and F. Duan, “Non-Uniform Heat Transfer Suppression to Enhance PCM Melting by Angled Fins,” Applied Thermal Engineering 129 (2018): 269–279.

[109] L.-L. Tian, X. Liu, S. Chen, and Z. G. Shen, “Effect of Fin Material on PCM Melting in a Rectangular Enclosure,” Applied Thermal Engineering 167 (2020): 114764.

[110] Y. Lin, Q. Kang, Y. Liu, et al., “Flexible, Highly Thermally Conductive and Electrically Insulating Phase Change Materials for Advanced Thermal Management of 5G Base Stations and Thermoelectric Generators,” Nano-Micro Letters 15, no. 1 (2023): 31.

[111] D. Zhou and C. Y. Zhao, “Experimental Investigations on Heat Transfer in Phase Change Materials (PCMs) Embedded in Porous Materials,” Applied Thermal Engineering 31, no. 5 (2011): 970–977.

[112] B. Zhao, C. Li, R. Zhu, N. Sheng, and C. Zhu, “Facile Synthesis of Porous AlN@C Supporting Material for Stabilizing Phase Change Thermal Storage Material,” Materials Chemistry and Physics 301 (2023): 127708.

[113] S. Motahar, N. Nikkam, A. A. Alemrajabi, R. Khodabandeh, M. S. Toprak, and M. Muhammed, “Experimental Investigation on Thermal and Rheological Properties of n-Octadecane With Dispersed TiO₂ Nanoparticles,” International Communications in Heat and Mass Transfer 59 (2014): 68–74.

[114] S. Motahar, A. A. Alemrajabi, and R. Khodabandeh, “Experimental Investigation on Heat Transfer Characteristics During Melting of a Phase Change Material With Dispersed TiO₂ Nanoparticles in a Rectangular Enclosure,” International Journal of Heat and Mass Transfer 109 (2017): 134–146.

[115] X. Xiao, P. Zhang, and M. Li, “Experimental and Numerical Study of Heat Transfer Performance of Nitrate/Expanded Graphite Composite PCM for Solar Energy Storage,” Energy Conversion and Management 105 (2015): 272–284.

[116] R. Prabakaran, J. Prasanna Naveen Kumar, D. Mohan Lal, C. Selvam, and S. Harish, “Constrained Melting of Graphene-Based Phase Change Nanocomposites Inside a Sphere,” Journal of Thermal Analysis and Calorimetry 139 (2020): 941–952.

[117] A. S. Abdelrazik, R. Saidur, F. A. Al-Sulaiman, A. Al-Ahmed, and R. Ben-Mansour, “Multiwalled CNT and Graphene Nanoplatelets Based Nano-Enhanced PCMs: Evaluation for the Thermal Performance and Its Implications on the Performance of Hybrid PV/Thermal Systems,” Materials Today Communications 31 (2022): 103618.

[118] H. Zhang, X. Wang, and D. Wu, “Silica Encapsulation of n-Octadecane via Sol–Gel Process: A Novel Microencapsulated Phase-Change Material With Enhanced Thermal Conductivity and Performance,” Journal of Colloid and Interface Science 343, no. 1 (2010): 246–255.

[119] S. Yu, X. Wang, and D. Wu, “Microencapsulation of n-Octadecane Phase Change Material With Calcium Carbonate Shell for Enhancement of Thermal Conductivity and Serving Durability: Synthesis, Microstructure, and Performance Evaluation,” Applied Energy 114, no. feb(2014): 632–643.

[120] Y. Zhang, X. Wang, and D. Wu, “Microencapsulation of n-Dodecane Into Zirconia Shell Doped With Rare Earth: Design and Synthesis of Bifunctional Microcapsules for Photoluminescence Enhancement and Thermal Energy Storage,” Energy 97 (2016): 113–126.

[121] S. Tahan Latibari, M. Mehrali, M. Mehrali, T. M. Indra Mahlia, and H. S. Cornelis Metselaar, “Synthesis, Characterization and Thermal Properties of Nanoencapsulated Phase Change Materials via Sol–Gel Method,” Energy 61 (2013): 664–672.

[122] L. Pan, Q. Tao, S. Zhang, et al., “Preparation, Characterization and Thermal Properties of Micro-Encapsulated Phase Change Materials,” Solar Energy Materials and Solar Cells 98 (2012): 66–70.

[123] N. Dhaidan and M. Al-Jethelah, “Study on the Effect of Nanoparticle Dispersion on the Melting of PCM in Hemicylindrical Cell,” 12th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning (PCM 2018)—At Orford (Québec), Canada (2018), 240–247.

[124] T. Qian, J. Li, X. Min, Y. Deng, W. Guan, and L. Ning, “Radial-Like Mesoporous Silica Sphere: A Promising New Candidate of Supporting Material for Storage of Low-, Middle-, and High-Temperature Heat,” Energy 112 (2016): 1074–1083.

[125] D. Sharma, B. K. Pandey, R. L. Jaiswal, J. Gupta, and S. Shukla, “Studies on Thermal Conductivity of Metallic Nanoparticles With Varying Shape and Size,” Chemical Physics Letters 846 (2024): 141363.

[126] M. Rajabipour Shirkouhi and M. M. Heyhat, “On the Effect of Nanoparticles in Different PCM Configurations in the Thermal Performance of a Packed Bed Energy Storage System,” Results in Engineering 23 (2024): 102441.

[127] W. Li, X. Zhang, X. Wang, G. Tang, and H. Shi, “Fabrication and Morphological Characterization of Microencapsulated Phase Change Materials (MicroPCMs) and Macrocapsules Containing MicroPCMs for Thermal Energy Storage,” Energy 38, no. 1 (2012): 249–254.

[128] W. Su, J. Darkwa, and G. Kokogiannakis, “Review of Solid–Liquid Phase Change Materials and Their Encapsulation Technologies,” Renewable and Sustainable Energy Reviews 48 (2015): 373–391.

[129] N. Sarier, E. Onder, and G. Ukuser, “Silver Incorporated Microencapsulation of n-Hexadecane and n-Octadecane Appropriate for Dynamic Thermal Management in Textiles,” Thermochimica Acta 613 (2015): 17–27.

[130] A. M. Borreguero, J. L. Valverde, J. F. Rodríguez, A. H. Barber, J. J. Cubillo, and M. Carmona, “Synthesis and Characterization of Microcapsules Containing Rubitherm®RT27 Obtained by Spray Drying,” Chemical Engineering Journal 166, no. 1 (2011): 384–390.

[131] S. Park, Y. Lee, Y. S. Kim, et al., “Magnetic Nanoparticle-Embedded PCM Nanocapsules Based on Paraffin Core and Polyurea Shell,” Colloids and Surfaces, A: Physicochemical and Engineering Aspects 450 (2014): 46–51.

[132] Y. Hu, P. K. Heiselberg, C. Drivsholm, A. S. Søvsø, P. J. C. Vogler-Finck, and K. Kronby, “Experimental and Numerical Study of PCM Storage Integrated With HVAC System for Energy Flexibility,” Energy and Buildings 255 (2022): 111651.

[133] A. El-Sawi, F. Haghighat, and H. Akbari, “Assessing Long-Term Performance of Centralized Thermal Energy Storage System,” Applied Thermal Engineering 62, no. 2 (2014): 313–321.

[134] Y. Yang, W. Wu, S. Fu, and H. Zhang, “Study of a Novel Ceramsite-Based Shape-Stabilized Composite Phase Change Material (PCM) for Energy Conservation in Buildings,” Construction and Building Materials 246 (2020): 118479.

[135] H. Bagheri-Esfeh, H. Safikhani, and S. Motahar, “Multi-Objective Optimization of Cooling and Heating Loads in Residential Buildings Integrated With Phase Change Materials Using the Artificial Neural Network and Genetic Algorithm,” Journal of Energy Storage 32 (2020): 101772.

[136] W. Cheng, B. Xie, R. Zhang, Z. Xu, and Y. Xia, “Effect of Thermal Conductivities of Shape Stabilized PCM on Under-Floor Heating System,” Applied Energy 144 (2015): 10–18.

[137] Y. Jung, M. Kim, T. Kim, J. Ahn, J. Lee, and S. H. Ko, “Functional Materials and Innovative Strategies for Wearable Thermal Management Applications,” Nano-Micro Letters 15, no. 1 (2023): 160.

[138] M. Zhao, C. Gao, F. Wang, K. Kuklane, I. Holmér, and J. Li, “The Torso Cooling of Vests Incorporated With Phase Change Materials: A Sweat Evaporation Perspective,” Textile Research Journal 83, no. 4 (2013): 418–425.

[139] M. Itani, N. Ghaddar, K. Ghali, D. Ouahrani, and W. Chakroun, “Cooling Vest With Optimized PCM Arrangement Targeting Torso Sensitive Areas That Trigger Comfort When Cooled for Improving Human Comfort in Hot Conditions,” Energy and Buildings 139, no. March(2017): 417–425.

[140] J. W. Choi, M. J. Kim, and J. Y. Lee, “Alleviation of Heat Strain by Cooling Different Body Areas During Red Pepper Harvest Work at WBGT 33°C,” Industrial Health 46, no. 6 (2008): 620–628.

[141] P. Sanchez, M. Sanchez-Fernandez, A. Romero, et al., “Development of Thereto-Regulating Textiles Using Paraffin Wax Microcapsules,” Thermochimica Acta: An International Journal Concerned With the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems 498, no. 1/2 (2010): 16–21.

[142] X. Wan, F. Wang, and Udayraj, “Numerical Analysis of Cooling Effect of Hybrid Cooling Clothing Incorporated With Phase Change Material (PCM) Packs and Air Ventilation Fans,” International Journal of Heat and Mass Transfer 126 (2018): 636–648.

[143] C. Gao, K. Kuklane, and I. Holmér, “Cooling Vests With Phase Change Material Packs: The Effects of Temperature Gradient, Mass and Covering Area,” Ergonomics 53, no. 5 (2010): 716–723.

[144] Y. Bao, J. Lyu, Z. Liu, Y. Ding, and X. Zhang, “Bending Stiffness-Directed Fabricating of Kevlar Aerogel-Confined Organic Phase-Change Fibers,” ACS Nano 15, no. 9 (2021): 15180–15190.

[145] K. Zhu, L. Li, P. Xue, et al., “Three-in-One” Strategy: Heat Regulation and Conversion Enhancement of a Multifunctional Separator for Safer Lithium–Sulfur Batteries,” Carbon Energy 5, no. 11 (2023): e352.

[146] F. Bai, M. Chen, W. Song, Z. Feng, Y. Li, and Y. Ding, “Thermal Management Performances of PCM/Water Cooling-Plate Using for Lithium-Ion Battery Module Based on Non-Uniform Internal Heat Source,” Applied Thermal Engineering 126 (2017): 17–27.

[147] C. Lin, S. Xu, G. Chang, and J. Liu, “Experiment and Simulation of a LiFePO₄ Battery Pack With a Passive Thermal Management System Using Composite Phase Change Material and Graphite Sheets,” Journal of Power Sources 275 (2015): 742–749.

[148] G. Jiang, J. Huang, Y. Fu, M. Cao, and M. Liu, “Thermal Optimization of Composite Phase Change Material/Expanded Graphite for Li-Ion Battery Thermal Management,” Applied Thermal Engineering 108 (2016): 1119–1125.

[149] Z. Rao, Q. Wang, and C. Huang, “Investigation of the Thermal Performance of Phase Change Material/Mini-Channel Coupled Battery Thermal Management System,” Applied Energy 164 (2016): 659–669.

[150] X. Duan and G. F. Naterer, “Heat Transfer in Phase Change Materials for Thermal Management of Electric Vehicle Battery Modules,” International Journal of Heat and Mass Transfer 53, no. 23 (2010): 5176–5182.

[151] F. Samimi, A. Babapoor, M. Azizi, and G. Karimi, “Thermal Management Analysis of a Li-Ion Battery Cell Using Phase Change Material Loaded With Carbon Fibers,” Energy 96 (2016): 355–371.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.