Recent Advances in NASICON-Type Electrolytes for Solid-State Metal Batteries

Abstract

Compared to traditional liquid electrolyte batteries, solid metal batteries offer advantages such as a wide operating temperature range, high energy density, and improved safety, making them a promising energy storage technology. Solid electrolytes, as the core components of solid-state batteries, are key factors in advancing solid-state battery technology. Among various solid electrolytes, Na super ionic conductor (NASICON)-type solid electrolytes exhibit high ionic conductivity (10⁻³ S·cm⁻¹), a wide electrochemical window, and good thermal stability, providing room for the development of high energy-density solid metal batteries. Since the discovery of NASICON-type solid electrolytes in 1976, interest in their use in all-solid-state battery development has grown significantly. In this review, we comprehensively analyze the common features of NASICON lithium-ion conductors and NASICON sodium-ion conductors, review the historical development of NASICON-type solid electrolytes, systematically summarize the transport mechanisms of metal cations in NASICON-type solid electrolytes, discuss the latest strategies for enhancing ionic conductivity, elaborate on the latest methods for improving mechanical stability and interface stability, and point out the requirements of high energy density devices for NASICON-type solid electrolytes as well as three types of in situ characterization techniques for interfaces. Finally, we highlight the challenges and potential solutions for the future development of NASICON-type solid electrolytes and solid-state metal batteries.

Keywords

energy density / interfaces / NASICON / solid electrolytes / solid metal batteries

References

[1] Y. Lu, C. Z. Zhao, H. Yuan, X. Cheng, J. Huang, and Q. Zhang, “Critical Current Density in Solid-State Lithium Metal Batteries: Mechanism, Influences, and Strategies,” Advanced Functional Materials 31, no. 18 (2021): 2009925.

[2] X. Guo, L. Hao, Y. Yang, Y. Wang, Y. Lu, and H. Yu, “High Cathode Utilization Efficiency Through Interface Engineering in All-Solid-State Lithium-Metal Batteries,” Journal of Materials Chemistry A 7, no. 45 (2019): 25915–25924.

[3] T. Krauskopf, F. H. Richter, W. G. Zeier, and J. Janek, “Physicochemical Concepts of the Lithium Metal Anode in Solid-State Batteries,” Chemical Reviews 120, no. 15 (2020): 7745–7794.

[4] B. H. Zhang, Y. Wu, Y. L. Hou, J. Chen, Z. Ma, and D. Zhao, “Contributing to the Revolution of Electrolyte Systems via in Situ Polymerization at Different Scales: A Review,” Small 20, no. 1 (2024): 2305322.

[5] H. Yuan, J. Liu, Y. Lu, et al., “Toward Practical All-Solid-State Batteries With Sulfide Electrolyte: A Review,” Chemical Research in Chinese Universities 36, no. 3 (2020): 377–385.

[6] X. Nie, J. Hu, and C. Li, “Halide-Based Solid Electrolytes: The History, Progress, and Challenges,” Interdisciplinary Materials 2, no. 3 (2023): 365–389.

[7] L. Yang, Z. Lu, Y. Qin, et al., “Interrelated Interfacial Issues Between a Li₇La₃Zr₂O₁₂-Based Garnet Electrolyte and Li Anode in the Solid-State Lithium Battery: A Review,” Journal of Materials Chemistry A 9, no. 10 (2021): 5952–5979.

[8] Y. Gao, H. Zhang, J. Peng, et al., “A 30-Year Overview of Sodium-Ion Batteries,” Carbon Energy 6, no. 6 (2024): e464.

[9] Q. Wang, N. Bai, Y. Wang, et al., “Optimization and Progress of Interface Construction of Ceramic Oxide Solid-State Electrolytes in Li-Metal Batteries,” Energy Storage Materials 71 (2024): 103589.

[10] J. Wu, “Understanding the Electric Double-Layer Structure, Capacitance, and Charging Dynamics,” Chemical Reviews 122, no. 12 (2022): 10821–10859.

[11] W. Xiao, J. Wang, L. Fan, J. Zhang, and X. Li, “Recent Advances in Li_1+xAl_xTi_2−x(PO₄)₃ Solid-State Electrolyte for Safe Lithium Batteries,” Energy Storage Materials 19 (2019): 379–400.

[12] L. Ye and X. Li, “A Dynamic Stability Design Strategy for Lithium Metal Solid State Batteries,” Nature 593, no. 7858 (2021): 218–222.

[13] M. Zhong, M. Zhang, and X. Li, “Carbon Nanomaterials and Their Composites for Supercapacitors,” Carbon Energy 4, no. 5 (2022): 950–985.

[14] R. DeWees and H. Wang, “Synthesis and Properties of NaSICON-Type LATP and LAGP Solid Electrolytes,” ChemSusChem 12, no. 16 (2019): 3713–3725.

[15] Y. Li, M. Li, Z. Sun, Q. Ni, H. Jin, and Y. Zhao, “Recent Advance on NASICON Electrolyte in Solid-State Sodium Metal Batteries,” Energy Storage Materials 56 (2023): 582–599.

[16] J. H. Yin, H. Zhu, S. J. Yu, et al., “Recent Advances of LATP and Their NASICON Structure as a Solid-State Electrolyte for Lithium-Ion Batteries,” Advanced Engineering Materials 25, no. 20 (2023): 2300566.

[17] Z. Jian, Y. S. Hu, X. Ji, and W. Chen, “NASICON-Structured Materials for Energy Storage,” Advanced Materials 29, no. 20 (2017): 1601925.

[18] C. Luo, M. Yi, Z. Cao, W. Hui, and Y. Wang, “Review of Ionic Conductivity Properties of NASICON Type Inorganic Solid Electrolyte Latp,” ACS Applied Electronic Materials 6, no. 2 (2024): 641–657.

[19] Y. Zhang, H. Liu, Z. Xie, W. Qu, D. J. Freschi, and J. Liu, “Progress and Perspectives of Lithium Aluminum Germanium Phosphate-Based Solid Electrolytes for Lithium Batteries,” Advanced Functional Materials 33, no. 32 (2023): 2300973.

[20] Z. Guo, S. Zhao, T. Li, D. Su, S. Guo, and G. Wang, “Recent Advances in Rechargeable Magnesium-Based Batteries for High-Efficiency Energy Storage,” Advanced Energy Materials 10, no. 21 (2020): 1903591.

[21] P. Hu, Z. Zou, X. Sun, et al., “Uncovering the Potential of M1-Site-Activated NASICON Cathodes for Zn-Ion Batteries,” Advanced Materials 32, no. 14 (2020): 1907526.

[22] J. Wang, T. He, X. Yang, et al., “Design Principles for NASICON Super-Ionic Conductors,” Nature Communications 14, no. 1 (2023): 5210.

[23] X. Zhao, J. Yan, H. Hong, et al., “Ligand-Substitution Chemistry Enabling Wide-Voltage Aqueous Hybrid Electrolyte for Ultrafast-Charging Batteries,” Advanced Energy Materials 12, no. 45 (2022): 2202478.

[24] J. B. Goodenough, H. Y. P. Hong, and J. A. Kafalas, “Fast Na⁺-Ion Transport in Skeleton Structures,” Materials Research Bulletin 11, no. 2 (1976): 203–220.

[25] H. Aono, “Ionic-Conductivity and Sinterability of Lithium Titanium Phosphate System,” Solid State Ionics 40–41, no. 1 (1990): 38–42.

[26] J. Fu, “Superionic Conductivity of Glass-Ceramics in the System Li₂O-Al₂O₃-TiO₂-P₂O₅,” Solid State Ionics 96, no. 3–4 (1997): 195–200.

[27] Y. Noguchi, E. Kobayashi, L. S. Plashnitsa, S. Okada, and J. Yamaki, “Fabrication and Performances of All Solid-State Symmetric Sodium Battery Based on NASICON-Related Compounds,” Electrochimica Acta 101 (2013): 59–65.

[28] Y. Li, W. Zhou, X. Chen, et al., “Mastering the Interface for Advanced All-Solid-State Lithium Rechargeable Batteries,” Proceedings of the National Academy of Sciences of the United States of America 113, no. 47 (2016): 13313–13317.

[29] S. Susman, C. Delbecq, J. McMillan, and M. Roche, “Nasiglas—A New Vitreous Electrolyte,” Solid State Ionics 9–10 (1983): 667–673.

[30] H. Y. P. Hong, “Crystal Structures and Crystal Chemistry in the System Na_1+xZr₂Si_xP_3−xO₁₂,” Materials Research Bulletin 11, no. 2 (1976): 173–182.

[31] A. Serghini, R. Brochu, M. Ziyad, M. Loukah, and J. C. Védrine, “Behaviour of Copper-Zirconium Nasicon-Type Phosphate, Cu^IZr₂(PO₄)₃, in the Decomposition of Isopropyl Alcohol,” Journal of the Chemical Society, Faraday Transactions 87 (1991): 2487–2491.

[32] M. D. Singh, G. Kaur, S. Sharma, and A. Dalvi, “All-Solid-State Na⁺ Ion Supercapacitors Using Na₃Zr₂Si₂PO₁₂-Polymer Hybrid Films as Electrolyte,” Journal of Energy Storage 41 (2021): 102984.

[33] M. Subramanian, R. Subramanian, and A. Clearfield, “Lithium Ion Conductors in the System AB(IV)₂(PO₄)₃ (B = Ti, Zr and Hf),” Solid State Ionics 18–19 (1986): 562–569.

[34] H. Aono, E. Sugimoto, Y. Sadaoka, N. Imanaka, and G. Adachi, “Electrical Property and Sinterability of LiTi₂(PO₄)₃ Mixed With Lithium Salt (Li₃PO₄ or Li₃BO₃),” Solid State Ionics 47, no. 3–4 (1991): 257–264.

[35] J. Fu, “Fast Li⁺ Ion Conducting Glass-Ceramics in the System Li₂O-Al₂O₃-GeO₂-P₂O₅,” Solid State Ionics 104, no. 3–4 (1997): 191–194.

[36] P. Birke, “A First Approach to a Monolithic All Solid State Inorganic Lithium Battery,” Solid State Ionics 118, no. 1–2 (1999): 149–157.

[37] Y. Zhang, T. Zhan, Y. Sun, L. Lu, and B. Chen, “Revolutionizing Solid-State NASICON Sodium Batteries: Enhanced Ionic Conductivity Estimation Through Multivariate Experimental Parameters Leveraging Machine Learning,” ChemSusChem 17, no. 6 (2024): e202301284.

[38] Q. Zhou, L. Wang, W. Li, et al., “Sodium Superionic Conductors (NASICONs) as Cathode Materials for Sodium-Ion Batteries,” Electrochemical Energy Reviews 4, no. 4 (2021): 793–823.

[39] P. Maldonado-Manso, M. A. G. Aranda, S. Bruque, J. Sanz, and E. R. Losilla, “Nominal vs. Actual Stoichiometries in Al-Doped Nasicons: A Study of the Na_1.4Al_0.4M_1.6(PO₄)₃ (M = Ge, Sn, Ti, Hf, Zr) Family,” Solid State Ionics 176, no. 17–18 (2005): 1613–1625.

[40] K. Arbi, J. M. Rojo, and J. Sanz, “Lithium Mobility in Titanium Based Nasicon Li_1+xTi_2−xAl_x(PO₄)₃ and LiTi_2−xZr_x(PO₄)₃ Materials Followed by NMR and Impedance Spectroscopy,” Journal of the European Ceramic Society 27, no. 13–15 (2007): 4215–4218.

[41] M. Zhang, K. Takahashi, I. Uechi, et al., “Water-Stable Lithium Anode With Li_1.4Al_0.4Ge_1.6(PO₄)₃-TiO₂ Sheet Prepared by Tape Casting Method for Lithium-Air Batteries,” Journal of Power Sources 235 (2013): 117–121.

[42] A. Paolella, X. Liu, A. Daali, et al., “Enabling High-Performance NASICON-Based Solid-State Lithium Metal Batteries Towards Practical Conditions,” Advanced Functional Materials 31, no. 30 (2021): 2102765.

[43] M. Cretin and P. Fabry, “Comparative Study of Lithium Ion Conductors in the System Li_1+xAl_xA_2x^IV (PO₄)₃ With A^IV = Ti or Ge and 0 ≤ x ≤ 0.7 for Use as Li⁺ Sensitive Membranes,” Journal of the European Ceramic Society 19, no. 16 (1999): 2931–2940.

[44] V. Epp, Q. Ma, E. M. Hammer, F. Tietz, and M. Wilkening, “Very Fast Bulk Li Ion Diffusivity in Crystalline Li_1.5Al_0.5Ti_1.5(PO₄)₃ as Seen Using NMR Relaxometry,” Physical Chemistry Chemical Physics 17, no. 48 (2015): 32115–32121.

[45] B. E. Francisco, C. R. Stoldt, and J. C. M'Peko, “Lithium-Ion Trapping From Local Structural Distortions in Sodium Super Ionic Conductor (NASICON) Electrolytes,” Chemistry of Materials 26, no. 16 (2014): 4741–4749.

[46] C. Li, R. Li, K. Liu, R. Si, Z. Zhang, and Y. Hu, “NASICON: A Promising Solid Electrolytefor Solid-State Sodium Batteries,” Interdisciplinary Materials 1 (2022): 396–416.

[47] X. Lu, S. Wang, R. Xiao, S. Shi, H. Li, and L. Chen, “First-Principles Insight Into the Structural Fundamental of Super Ionic Conducting in NASICON MTi₂(PO₄)₃ (M = Li, Na) Materials for Rechargeable Batteries,” Nano Energy 41 (2017): 626–633.

[48] X. He, Y. Zhu, and Y. Mo, “Origin of Fast Ion Diffusion in Super-Ionic Conductors,” Nature Communications 8 (2017): 15893.

[49] M. Monchak, T. Hupfer, A. Senyshyn, et al., “Lithium Diffusion Pathway In Li_1.3Al_0.3Ti_1.7(PO₄)₃ (LATP) Superionic Conductor,” Inorganic Chemistry 55, no. 6 (2016): 2941–2945.

[50] L. Hallopeau, D. Bregiroux, G. Rousse, et al., “Microwave-Assisted Reactive Sintering and Lithium Ion Conductivity of Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolyte,” Journal of Power Sources 378 (2018): 48–52.

[51] J. Kang, H. Chung, C. Doh, B. Kang, and B. Han, “Integrated Study of First Principles Calculations and Experimental Measurements for Li-Ionic Conductivity in Al-Doped Solid-State LiGe₂(PO₄)₃ Electrolyte,” Journal of Power Sources 293 (2015): 11–16.

[52] M. Weiss, D. A. Weber, A. Senyshyn, J. Janek, and W. G. Zeier, “Correlating Transport and Structural Properties In Li_1+xAl_xGe_2−x(PO₄)₃ (LAGP) Prepared From Aqueous Solution,” ACS Applied Materials & Interfaces 10, no. 13 (2018): 10935–10944.

[53] P. H. Kuo and J. Du, “Lithium Ion Diffusion Mechanism and Associated Defect Behaviors in Crystalline Li_1+xAl_xGe_2−x(PO₄)₃ Solid-State Electrolytes,” Journal of Physical Chemistry C 123, no. 45 (2019): 27385–27398.

[54] Z. Zhang, Z. Zou, K. Kaup, et al., “Correlated Migration Invokes Higher Na⁺-Ion Conductivity in NaSICON-Type Solid Electrolytes,” Advanced Energy Materials 9, no. 42 (2019): 1902373.

[55] Z. Zou, N. Ma, A. Wang, et al., “Relationships Between Na⁺ Distribution, Concerted Migration, and Diffusion Properties in Rhombohedral NASICON,” Advanced Energy Materials 10, no. 30 (2020): 2001486.

[56] D. Rettenwander, A. Welzl, S. Pristat, et al., “A Microcontact Impedance Study on NASICON-Type Li_1+xAl_xTi_2−x(PO₄)₃ (0 ≤ x ≤ 0.5) Single Crystals,” Journal of Materials Chemistry A 4, no. 4 (2016): 1506–1513.

[57] Y. Gao, A. M. Nolan, P. Du, et al., “Classical and Emerging Characterization Techniques for Investigation of Ion Transport Mechanisms in Crystalline Fast Ionic Conductors,” Chemical Reviews 120, no. 13 (2020): 5954–6008.

[58] G. J. Redhammer, D. Rettenwander, S. Pristat, et al., “A Single Crystal X-Ray and Powder Neutron Diffraction Study on NASICON-Type Li_1+xAl_xTi_2−x(PO₄)₃ (0 ≤ x ≤ 0.5) Crystals: Implications on Ionic Conductivity,” Solid State Sciences 60 (2016): 99–107.

[59] X. Zhang, D. Butenko, L. Gao, et al., “Synergistic Ion Diffusion in Lithium Titanium Phosphate Conductors: A Tale From Solo to Ensemble,” Chemistry of Materials 35, no. 11 (2023): 4541–4548.

[60] F. Yin, Z. Zhang, Y. Fang, and C. Sun, “Insight Into the Mechanism of Li Ion Diffusion in Fluorine-Doped Li_1.3Al_0.3Ti_1.7(PO₄)₃ as an Electrolyte for Solid Lithium Metal Batteries,” Journal of Energy Storage 73 (2023): 108950.

[61] M. Fan, X. Deng, A. Zheng, and S. Yuan, “Solvothermal Synthesis High Lithium Ionic Conductivity of Gd-Doped Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolyte,” Functional Materials Letters 14, no. 03 (2021): 2140002.

[62] H. Tian, S. Liu, L. Deng, L. Wang, and L. Dai, “New-Type Hf-Based NASICON Electrolyte for Solid-State Na-Ion Batteries With Superior Long-Cycling Stability and Rate Capability,” Energy Storage Materials 39 (2021): 232–238.

[63] N. Zhao, R. Fang, M. H. He, et al., “Cycle Stability of Lithium/Garnet/Lithium Cells With Different Intermediate Layers,” Rare Metals 37 (2018): 473–479.

[64] Y. Nikodimos, L. H. Abrha, H. H. Weldeyohannes, et al., “A New High-Li⁺-Conductivity Mg-Doped Li_1.5Al_0.5Ge_1.5(PO₄)₃ Solid Electrolyte With Enhanced Electrochemical Performance for Solid-State Lithium Metal Batteries,” Journal of Materials Chemistry A 8, no. 48 (2020): 26055–26065.

[65] M. Illbeigi, A. Fazlali, M. Kazazi, and A. H. Mohammadi, “Effect of Simultaneous Addition of Aluminum and Chromium on the Lithium Ionic Conductivity of LiGe₂(PO₄)₃ NASICON-Type Glass-Ceramics,” Solid State Ionics 289 (2016): 180–187.

[66] L. Liu, X. Cui, Z. Jie, et al., “Improved Ion Conductivity and Interface Characteristics of the Te-Doped Solid NASICON Electrolyte Li_1.5Al_0.5Ge_1.5(PO₄)₃ With Graphite Coating,” Journal of Power Sources 575 (2023): 233137.

[67] Q. Wang, L. Liu, B. Zhao, et al., “Transport and Interface Characteristics of Te-Doped NASICON Solid Electrolyte Li_1.3Al_0.3Ti_1.7(PO₄)₃,” Electrochimica Acta 399 (2021): 139367.

[68] P. Wang, Y. Niu, K. Zhang, W. Hou, X. Yao, and Y. Xu, “Adapting Crystal Structure and Grain Boundaries Through Sm³⁺ Doping in Na₃Zr₂Si₂PO for Boosting Applicability in Sodium Solid-State Batteries,” ACS Applied Materials & Interfaces 16, no. 2 (2024): 2877–2887.

[69] Y. Lu, J. A. Alonso, Q. Yi, L. Lu, Z. L. Wang, and C. Sun, “A High-Performance Monolithic Solid-State Sodium Battery With Ca²⁺ Doped Na₃Zr₂Si₂PO₁₂ Electrolyte,” Advanced Energy Materials 9, no. 28 (2019): 1901205.

[70] J. Wang, J. Kang, X. Guo, et al., “Enhanced Ionic Conductivity in Na₃Zr₂Si₂PO₁₂ NASICON-Type Solid Electrolytes by Adding Mg²⁺-Ions,” Journal of Alloys and Compounds 988 (2024): 174327.

[71] B. Yan, L. Kang, M. Kotobuki, et al., “NASICON-Structured Solid-State Electrolyte Li_1.5Al_0.5-xGa_xGe_1.5(PO₄)₃ Prepared by Microwave Sintering,” Materials Technology 34, no. 6 (2019): 356–360.

[72] B. Yan, L. Kang, M. Kotobuki, L. He, B. Liu, and K. Jiang, “Boron Group Element Doping of Li_1.5Al_0.5Ge_1.5(PO₄)₃ Based on Microwave Sintering,” Journal of Solid State Electrochemistry 25, no. 2 (2021): 527–534.

[73] X. Lu, Z. Li, S. Liu, K. Huang, and J. Hai, “Influence of Rare-Earth Elements on the Ionic Conductivity of LATP Electrolyte and Its Application in Assembled Cells,” Journal of the American Ceramic Society 107, no. 4 (2024): 2407–2420.

[74] J. Li, C. Liu, C. Miao, Z. Kou, and W. Xiao, “Enhanced Ionic Conductivity and Electrochemical Stability of Indium Doping Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolytes for All-Solid-State Lithium-Ion Batteries,” Ionics 28, no. 1 (2022): 63–72.

[75] O. L. Andreev, K. V. Druzhinin, P. Y. Shevelin, and N. N. Batalov, “Influence of Solid Electrolyte Particles Size on Ionic Transport in Model Composite System (PVdF-HFP-Li_1.3Al_0.3Ti_1.7(PO₄)₃),” Ionics 19, no. 1 (2012): 33–39.

[76] W. Wang, W. Yuan, Z. Zhao, et al., “Enhanced Ionic Conductivity of Cu-Doped NASICON Solid Electrolyte for Solid-State Sodium Batteries,” Journal of Electroanalytical Chemistry 937 (2023): 117405.

[77] Y. Liu, L. Liu, J. Peng, et al., “A Niobium-Substituted Sodium Superionic Conductor With Conductivity Higher Than 5.5 mS cm⁻¹ Prepared by Solution-Assisted Solid-State Reaction Method,” Journal of Power Sources 518 (2022): 230765.

[78] D. Wu, L. Chen, H. Li, and F. Wu, “Solid-State Lithium Batteries-From Fundamental Research to Industrial Progress,” Progress in Materials Science 139 (2023): 101182.

[79] J. Kang, X. Guo, R. Gu, et al., “Enhanced Electrochemical Performance of Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolyte by Anion Doping,” Nano Research 17, no. 3 (2024): 1465–1472.

[80] K. Kwatek, W. Ślubowska, J. Trébosc, O. Lafon, and J. L. Nowiński, “Structural and Electrical Properties of Ceramic Li-Ion Conductors Based on Li_1.3Al_0.3Ti_1.7(PO₄)₃-LiF,” Journal of the European Ceramic Society 40, no. 1 (2020): 85–93.

[81] V. A. Vizgalov, T. Nestler, L. A. Trusov, et al., “Enhancing Lithium-Ion Conductivity in NASICON Glass-Ceramics by Adding Yttria,” CrystEngComm 20, no. 10 (2018): 1375–1382.

[82] S. Le, D. Chi, Y. Li, et al., “Na₃Zr₂Si₂PO₁₂ Solid Electrolyte With Bi₂O₃ as Sintering Aid for Solid-State Sodium Batteries,” Journal of Solid State Electrochemistry 28, no. 7 (2024): 2341–2349.

[83] L. Liu, D. Liang, X. Zhou, et al., “Enhancing Na-Ion Conducting Capacity of NASICON Ceramic Electrolyte Na_3.4Zr₂Si_2.4P_0.6O₁₂ by NaF Sintering Aid,” Journal of Materials Science 57, no. 25 (2022): 11774–11782.

[84] Y. C. Kim, K. N. Jung, J. W. Lee, and M. S. Park, “Improving the Ionic Conductivity of Li_1+xAl_xGe_2-x(PO₄)₃ Solid Electrolyte for All-Solid-State Batteries Using Microstructural Modifiers,” Ceramics International 46, no. 14 (2020): 23200–23207.

[85] J. Zhu, Y. Xiang, J. Zhao, et al., “Insights Into the Local Structure, Microstructure and Ionic Conductivity of Silicon Doped NASICON-Type Solid Electrolyte Li_1.3Al_0.3Ti_1.7P₃O₁₂,” Energy Storage Materials 44 (2022): 190–196.

[86] Y. Li, Z. Sun, C. Sun, H. Jin, and Y. Zhao, “Exploring the Origin of ZrO₂ Phase in Na₃Zr₂Si₂PO₁₂ Ceramic Electrolyte,” Ceramics International 49, no. 2 (2023): 3094–3098.

[87] T. Hupfer, E. C. Bucharsky, K. G. Schell, and M. J. Hoffmann, “Influence of the Secondary Phase LiTiOPO₄ on the Properties of Li_1+xAl_xTi_2−x(PO₄)₃ (x = 0; 0.3),” Solid State Ionics 302 (2017): 49–53.

[88] M. Shi mao-Lei, L. Liu Lei, F. Tian fang-Hui, Wang Peng-Fei, Li Jia-Jun, and Ma Lei, “Effect of Lithium-Free Flux B₂O₃ on the Ion Conductivity of Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolyte,” Acta Physica Sinica 66, no. 20 (2017): 208201.

[89] C. Gao, J. Zhou, Q. Zhang, P. Cui, Q. Zhang, and W. Wei, “Influence of LiBF₄ Sintering Aid on the Grain Boundary and Conductivity of LAGP Electrolyte,” Functional Materials Letters 16, no. 01 (2023): 2350001.

[90] L. Dai, J. Wang, Z. Shi, L. Yu, and J. Shi, “Influence of LiBF₄ Sintering Aid on the Microstructure and Conductivity of LATP Solid Electrolyte,” Ceramics International 47, no. 8 (2021): 11662–11667.

[91] J. S. Thokchom, N. Gupta, and B. Kumar, “Superionic Conductivity in a Lithium Aluminum Germanium Phosphate Glass-Ceramic,” Journal of the Electrochemical Society 155, no. 12 (2008): A915–A920.

[92] K. Zou, Z. Cai, X. Ke, et al., “Electrochemical Properties of LATP Ceramic Electrolyte Doped With LiBiO₃ Sintering Additive and Its Derived Sandwich Structure Composite Solid Electrolyte,” Ionics 29, no. 7 (2023): 2665–2678.

[93] W. Zhang, M. Weng, M. Zhang, et al., “Rapid Mining of Fast Ion Conductors via Subgraph Isomorphism Matching,” Journal of the American Chemical Society 146, no. 27 (2024): 18535–18543.

[94] Z. Zhao, X. Wang, S. Wu, et al., “Deep Learning-Driven Evaluation and Prediction of Ion-Doped NASICON Materials for Enhanced Solid-State Battery Performance,” Aapps Bulletin 34, no. 1 (2024): 26.

[95] P. Zhou, Z. Zhao, K. Sun, et al., “Machine Learning Guided Cobalt-Doping Strategy for Solid-State NASICON Electrolytes,” European Journal of Inorganic Chemistry 26, no. 26 (2023): e202300382.

[96] Y. Zeng, B. Ouyang, J. Liu, et al., “High-Entropy Mechanism to Boost Ionic Conductivity,” Science 378, no. 6626 (2022): 1320–1324.

[97] Y. H. Liang and L. Z. Fan, “Mechanical Failures in Solid-State Lithium Batteries and Their Solution,” Acta Physica Sinica 69, no. 22 (2020): 226201.

[98] H. Wang, H. An, H. Shan, L. Zhao, and J. Wang, “Research Progress on Interfaces of All-Solid-State Batteries,” Acta Physico Chimica Sinica 37, no. 11 (2021): 2007070.

[99] W. Z. Cao, Q. Li, S. B. Wang, W. J. Li, and H. Li, “Mechanism, Strategies, and Characterizations of Li Plating in Solid State Batteries,” Acta Physica Sinica 69, no. 22 (2020): 228204.

[100] J. J. Wortman and R. A. Evans, “Young's Modulus, Shear Modulus, and Poisson's Ratio in Silicon and Germanium,” Journal of Applied Physics 36, no. 1 (1965): 153–156.

[101] Z. Gao, J. Yang, G. Li, et al., “TiO₂ as Second Phase in Na₃Zr₂Si₂PO₁₂ to Suppress Dendrite Growth in Sodium Metal Solid-State Batteries,” Advanced Energy Materials 12, no. 9 (2022): 2103607.

[102] G. Yan, S. Yu, W. Yang, et al., “Anisotropy of the Mechanical Properties of Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid Electrolyte Material,” Journal of Power Sources 437 (2019): 226940.

[103] X. Sun, Y. Zhou, D. Li, et al., “A Review of Electrospun Separators for Lithium-Based Batteries: Progress and Application Prospects,” Carbon Energy 6, no. 9 (2024): e539.

[104] X. Xu, Y. Liu, O. O. Kapitanova, Z. Song, J. Sun, and S. Xiong, “Electro-Chemo-Mechanical Failure of Solid Electrolytes Induced by Growth of Internal Lithium Filaments,” Advanced Materials 34, no. 49 (2022): 2207232.

[105] S. D. Jackman and R. A. Cutler, “Effect of Microcracking on Ionic Conductivity in LATP,” Journal of Power Sources 218 (2012): 65–72.

[106] C. Yuan, X. Gao, Y. Jia, W. Zhang, Q. Wu, and J. Xu, “Coupled Crack Propagation and Dendrite Growth in Solid Electrolyte of All-Solid-State Battery,” Nano Energy 86 (2021): 106057.

[107] J. P. Gross, J. Malzbender, E. Dashjav, F. Tietz, and R. Schwaiger, “Conductivity, Microstructure and Mechanical Properties of Tape-Cast LATP With LiF and SiO₂ Additives,” Journal of Materials Science 57, no. 2 (2022): 925–938.

[108] W. Liu, Q. Wang, Q. Ouyang, et al., “NaF Interfacial Riveting and Lattice Doping Enable High-Density NZSP Solid Electrolyte With Long-Cycle Performance,” Journal of Alloys and Compounds 985 (2024): 174065.

[109] M. D. Tikekar, S. Choudhury, Z. Tu, and L. A. Archer, “Design Principles for Electrolytes and Interfaces for Stable Lithium-Metal Batteries,” Nature Energy 1, no. 9 (2016): 16114.

[110] K. A. Acord, A. D. Dupuy, X. Wang, et al., “Microstructure, Mechanical Properties, and Ionic Conductivity of a Solid-State Electrolyte Prepared Using Binderless Laser Powder Bed Fusion,” Journal of Materials Research 36, no. 22 (2021): 4565–4577.

[111] Z. Sun, Y. Zhao, Q. Ni, et al., “Solid-State Na Metal Batteries With Superior Cycling Stability Enabled by Ferroelectric Enhanced Na/Na₃Zr₂Si₂PO₁₂ Interface,” Small 18, no. 16 (2022): 2200716.

[112] S. Yi, T. Xu, L. Li, et al., “Fast Ion Conductor Modified Double-Polymer (PVDF and PEO) Matrix Electrolyte for Solid Lithium-Ion Batteries,” Solid State Ionics 355 (2020): 115419.

[113] W. Ling, N. Fu, J. Yue, et al., “A Flexible Solid Electrolyte With Multilayer Structure for Sodium Metal Batteries,” Advanced Energy Materials 10, no. 9 (2020): 1903966.

[114] Y. Lin, K. Liu, C. Xiong, M. Wu, and T. Zhao, “A Composite Solid Electrolyte With an Asymmetric Ceramic Framework for Dendrite-Free All-Solid-State Li Metal Batteries,” Journal of Materials Chemistry A 9, no. 15 (2021): 9665–9674.

[115] H. Wang, Y. Sun, Q. Liu, et al., “An Asymmetric Bilayer Polymer-Ceramic Solid Electrolyte for High-Performance Sodium Metal Batteries,” Journal of Energy Chemistry 74 (2022): 18–25.

[116] J. Li, J. Chen, X. Xu, et al., “Stabilizing the LAGP/Li Interface and in Situ Visualizing the Interfacial Structure Evolution for High-Performance Solid-State Lithium Metal Batteries,” Energy & Environmental Science 17, no. 15 (2024): 5521–5531.

[117] Q. Lu, J. Fang, J. Yang, G. Yan, S. Liu, and J. Wang, “A Novel Solid Composite Polymer Electrolyte Based on Poly(Ethylene Oxide) Segmented Polysulfone Copolymers for Rechargeable Lithium Batteries,” Journal of Membrane Science 425–426 (2013): 105–112.

[118] D. Cao, X. Sun, Q. Li, A. Natan, P. Xiang, and H. Zhu, “Lithium Dendrite in All-Solid-State Batteries: Growth Mechanisms, Suppression Strategies, and Characterizations,” Matter 3, no. 1 (2020): 57–94.

[119] A. Parejiya, R. Amin, M. B. Dixit, et al., “Improving Contact Impedance via Electrochemical Pulses Applied to Lithium-Solid Electrolyte Interface in Solid-State Batteries,” ACS Energy Letters 6, no. 10 (2021): 3669–3675.

[120] Z. Li, L. Kong, C. Peng, and W. Feng, “Gas-Phase Fluorination of Conjugated Microporous Polymer Microspheres for Effective Interfacial Stabilization in Lithium Metal Anodes,” Carbon Energy 5, no. 10 (2023): e354.

[121] L. Porz, T. Swamy, B. W. Sheldon, et al., “Mechanism of Lithium Metal Penetration Through Inorganic Solid Electrolytes,” Advanced Energy Materials 7, no. 20 (2017): 1701003.

[122] A. La Monaca, G. Girard, S. Savoie, et al., “Synthesis of Electrospun NASICON Li_1.5Al_0.5Ge_1.5(PO₄)₃ Solid Electrolyte Nanofibers by Control of Germanium Hydrolysis,” Journal of the Electrochemical Society 168, no. 11 (2021): 110512.

[123] M. Wang, S. Lv, M. Li, et al., “A Heterogeneous Quasi-Solid-State Hybrid Electrolyte Constructed From Electrospun Nanofibers Enables Robust Electrode/Electrolyte Interfaces for Stable Lithium Metal Batteries,” Advanced Fiber Materials 6, no. 3 (2024): 727–738.

[124] G. S. Hegde and R. Sundara, “A Flexible, Ceramic-Rich Solid Electrolyte for Room-Temperature Sodium-Sulfur Batteries,” Chemical Communications 58, no. 63 (2022): 8794–8797.

[125] C. Ou, H. Zhang, D. Ma, et al., “Li_1.3Al_0.3Ti_1.7P₃O₁₂ Activated PVDF Solid Electrolyte for Advanced Lithium-Oxygen Batteries,” Ecomat 6, no. 8 (2024): e12481.

[126] S. Zekoll, C. Marriner-Edwards, A. K. O. Hekselman, et al., “Hybrid Electrolytes With 3D Bicontinuous Ordered Ceramic and Polymer Microchannels for All-Solid-State Batteries,” Energy & Environmental Science 11, no. 1 (2018): 185–201.

[127] X. Wang, H. Zhai, B. Qie, et al., “Rechargeable Solid-State Lithium Metal Batteries With Vertically Aligned Ceramic Nanoparticle/Polymer Composite Electrolyte,” Nano Energy 60 (2019): 205–212.

[128] C. Yan, X. B. Cheng, Y. X. Yao, et al., “An Armored Mixed Conductor Interphase on a Dendrite-Free Lithium-Metal Anode,” Advanced Materials 30, no. 45 (2018): 1804461.

[129] T. Gu, L. Chen, Y. Huang, et al, “Engineering Ferroelectric Interlayer Between Li_1.3Al_0.3Ti_1.7(PO₄)₃ and Lithium Metal for Stable Solid-State Batteries Operating At Room Temperature,” Energy & Environmental Materials 6, no. 6 (2023): e12531.

[130] K. Cao, Q. Ma, F. Tietz, B. B. Xu, M. Yan, and Y. Jiang, “A Robust, Highly Reversible, Mixed Conducting Sodium Metal Anode,” Science Bulletin 66, no. 2 (2021): 179–186.

[131] D. Ding, H. Tao, X. Fan, X. Yang, and L. Z. Fan, “A Hybrid LiCl/Li_xSn Conductive Interlayer to Unlock the Potential of Solid-State Lithium Metal Batteries,” Advanced Functional Materials 34, no. 29 (2024): 2401457.

[132] S. Li, J. Lu, Z. Geng, et al., “Solid Polymer Electrolyte Reinforced With a Li_1.3Al_0.3Ti_1.7(PO₄)₃-Coated Separator for All-Solid-State Lithium Batteries,” ACS Applied Materials & Interfaces 14, no. 1 (2022): 1195–1202.

[133] S. Li, S. J. Yang, G. X. Liu, et al., “A Dynamically Stable Mixed Conducting Interphase for All-Solid-State Lithium Metal Batteries,” Advanced Materials 36, no. 3 (2024): 2307768.

[134] S. Lee, S. Park, W. Lee, et al., “In Situ Techniques for Li-Rechargeable Battery Analysis,” Carbon Energy 6, no. 12 (2024): e549.

[135] S. Zhou, M. Li, P. Wang, et al., “Liquid Metal as an Efficient Protective Layer for Lithium Metal Anodes in All-Solid-State Batteries,” Carbon Energy 6, no. 7 (2024): e464.

[136] C. Yan, R. Xu, Y. Xiao, et al., “Toward Critical Electrode/Electrolyte Interfaces in Rechargeable Batteries,” Advanced Functional Materials 30, no. 23 (2020): 1909887.

[137] Q. Liu, J. Yu, W. Guo, et al., “Boosting the Li|LAGP Interfacial Compatibility With Trace Nonflammable All-Fluorinated Electrolyte: The Role of Solid Electrolyte Interphase,” Ecomat 5, no. 4 (2023): e12322.

[138] Q. Zhang, Y. Lu, W. Guo, et al., “Hunting Sodium Dendrites in NASICON-Based Solid-State Electrolytes,” Energy Material Advances 2021 (2021): 9870879.

[139] L. Zhu, Y. Wang, Y. Wu, et al., “Boron Nitride-Based Release Agent Coating Stabilizes Li_1.3Al_0.3Ti_1.7(PO₄)₃/Li Interface With Superior Lean-Lithium Electrochemical Performance and Thermal Stability,” Advanced Functional Materials 32, no. 29 (2022): 2201136.

[140] X. Miao, H. Di, X. Ge, et al., “AlF₃-Modified Anode-Electrolyte Interface for Effective Na Dendrites Restriction in NASICON-Based Solid-State Electrolyte,” Energy Storage Materials 30 (2020): 170–178.

[141] C. Huang, S. Huang, A. Wang, et al., “Correction: Stabilizing the Li_1.4Al_0.4Ti_1.6(PO₄)₃/Li Interface With Anin Situconstructed Multifunctional Interlayer for High Energy Density Batteries,” Journal of Materials Chemistry A 11, no. 32 (2023): 17316–17317.

[142] Y. Li, Q. Shi, X. Yin, et al., “Construction Nasicon-Type NaTi₂(PO₄)₃ Nanoshell on the Surface of P2-Type Na_0.67Co_0.2Mn_0.8O₂ Cathode for Superior Room/Low-Temperature Sodium Storage,” Chemical Engineering Journal 402 (2020): 126181.

[143] P. Zhang, C. Xie, G. Han, et al., “Stable Cycling of LiCoO₂ at 4.55 V Enabled by Combined Mg Doping and Surface Coating of NASICON-Type Electrolyte,” Materials Today Nano 15 (2021): 100122.

[144] M. Ihrig, E. Dashjav, A. M. Laptev, et al., “Increasing the Performance of All-Solid-State Li Batteries by Infiltration of Li-Ion Conducting Polymer Into LFP-LATP Composite Cathode,” Journal of Power Sources 543 (2022): 231822.

[145] Z. Chen, H. Zhang, H. Xu, et al., “In Situ Generated Polymer Electrolyte Coating-Based Janus Interfaces for Long-Life LAGP-Based NMC811/Li Metal Batteries,” Chemical Engineering Journal 433 (2022): 133589.

[146] B. Yan, Y. Wang, H. Ren, et al., “Interface Modification of NASICON-Structured Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP) by Femtosecond Laser Structuring and Ionic Liquid,” International Journal of Electrochemical Science 17, no. 5 (2022): 220513.

[147] Z. Yang, H. Yuan, C. Zhou, et al., “Facile Interfacial Adhesion Enabled LATP-Based Solid-State Lithium Metal Battery,” Chemical Engineering Journal 392 (2020): 123650.

[148] Y. Zhu, J. Li, and J. Liu, “A Bifunctional Ion-Electron Conducting Interlayer for High Energy Density All-Solid-State Lithium-Sulfur Battery,” Journal of Power Sources 351 (2017): 17–25.

[149] Q. Zhang, K. Pan, M. Jia, X. Zhang, and S. Zhang, “Ionic Liquid Additive Stabilized Cathode/Electrolyte Interface in LiCoO₂ Based Solid-State Lithium Metal Batteries,” Electrochimica Acta 368 (2020): 137593.

[150] D. T. Nguyen, J. Kim, and Y. Lee, “Design of Interfacial Li-Ion Transfer Channels for Practical Improvement of a Multicomponent High-Voltage Olivine Cathode,” Ceramics International 50, no. 7 (2024): 12351–12360.

[151] F. Lalère, J. B. Leriche, M. Courty, et al., “An All-Solid State NASICON Sodium Battery Operating at 200°C,” Journal of Power Sources 247 (2014): 975–980.

[152] X. Yi, X. Liu, B. Qin, et al., “High-Energy Composite Cathode for Solid-State Lithium-Oxygen Battery Boosted by Ultrafine Carbon Nanotube Catalysts and Amorphous Lithium Peroxide,” Materials Today Chemistry 29 (2023): 101430.

[153] M. Guo, L. Yang, Z. Yang, et al., “Tribological Behaviors of Oxygen-Doped Carbon Coatings Deposited by Ion-Irradiation-Assisted Growth,” Surface and Coatings Technology 425 (2021): 127689.

[154] T. Lan, C. L. Tsai, F. Tietz, et al., “Room-Temperature All-Solid-State Sodium Batteries With Robust Ceramic Interface Between Rigid Electrolyte and Electrode Materials,” Nano Energy 65 (2019): 104040.

[155] Z. Zhang, S. Chen, X. Yao, et al., “Enabling High-Areal-Capacity All-Solid-State Lithium-Metal Batteries by Tri-Layer Electrolyte Architectures,” Energy Storage Materials 24 (2020): 714–718.

[156] J. Kriegler, E. Jaimez-Farnham, M. Scheller, et al., “Design, Production, and Characterization of Three-Dimensionally-Structured Oxide-Polymer Composite Cathodes for All-Solid-State Batteries,” Energy Storage Materials 57 (2023): 607–617.

[157] J. Suo, Q. Zhao, H. Tian, et al., “Designing a Quasi-Liquid Alloy Interface for Solid Na-Ion Battery,” ACS Nano 17, no. 11 (2023): 10229–10235.

[158] X. Tang, W. Han, Y. Zhang, and S. Liu, “Interface Engineering of Sodium Metal Anode for All-Solid-State Sodium Batteries,” Journal of Power Sources 623 (2024): 235397.

[159] Y. Shi, Z. Guo, C. Wang, et al, “Design of Multifunctional Interfaces on Ceramic Solid Electrolytes for High-Performance Lithium-Air Batteries,” Green Energy & Environment 10, no. 1 (2025): 183–192.

[160] J. Yang, G. Liu, M. Avdeev, et al., “Ultrastable All-Solid-State Sodium Rechargeable Batteries,” ACS Energy Letters 5, no. 9 (2020): 2835–2841.

[161] Q. Liu, D. Zhou, D. Shanmukaraj, et al., “Self-Healing Janus Interfaces for High-Performance LAGP-Based Lithium Metal Batteries,” ACS Energy Letters 5, no. 5 (2020): 1456–1464.

[162] H. Li, X. Zhang, H. Huang, et al., “Ionic Liquid Reinforced NaSICON-Type Oxide Electrolyte Films Enabling Solid State Conversion Metal Fluoride-Lithium Batteries,” Energy Storage Materials 70 (2024): 103452.

[163] Z. Zhang, Q. Zhang, J. Shi, et al., “A Self-Forming Composite Electrolyte for Solid-State Sodium Battery With Ultralong Cycle Life,” Advanced Energy Materials 7, no. 4 (2016): 1601196.

[164] L. Wang, S. Fang, H. Wang, et al., “Flexible Self-Supporting Organic Cathode With Interface Engineering for High-Performance and Wide-Temperature Sodium-Ion Batteries,” Carbon Energy 6, no. 11 (2024): e632.

[165] M. Jia, N. Zhao, H. Huo, and X. Guo, “Comprehensive Investigation Into Garnet Electrolytes Toward Application-Oriented Solid Lithium Batteries,” Electrochemical Energy Reviews 3, no. 4 (2020): 656–689.

[166] S. Wang, Z. Jiang, X. Chen, et al., “Tape-Casting Li_0.34La_0.56TiO₃ Ceramic Electrolyte Films Permit High Energy Density of Lithium-Metal Batteries,” Advanced Materials 32, no. 6 (2020): 1906221.

[167] J. A. S. Oh, X. Xu, Z. Zeng, et al., “Thin NASICON Electrolyte to Realize High Energy Density Solid-State Sodium Metal Battery,” Energy & Environmental Materials 6, no. 6 (2023): e12472.

[168] W. Meng, J. Liu, L. Wang, L. Dai, and S. Liu, “In Situ Construction of a Liquid Film Interface With Fast Ion Transport for Solid Sodium-Ion Batteries,” Nano Letters 22, no. 13 (2022): 5214–5220.

[169] Y. Zou, H. Weng, Z. Jiang, et al., “Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery,” Journal of Power Sources 591 (2024): 233850.

[170] C. Shi, W. Jianyuan, X. Jianfang, H. Wei, and C. Songyan, “Preparation and Properties Study of Magnetron Sputtered Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid-State Electrolyte Thin Film,” Joumal of Xiamen University (Natural Science) 61, no. 5 (2022): 800–807.

[171] Z. Sun, L. Liu, B. Yang, et al., “Preparation and Ion Conduction of Li_1.5Al_0.5Ge_1.5(PO₄)₃ Solid Electrolyte Films Using Radio Frequency Sputtering,” Solid State Ionics 346 (2020): 115224.

[172] T. Mousavi, I. Slattery, B. Jagger, J. Liu, S. Speller, and C. Grovenor, “Development of Sputtered Nitrogen-Doped Li_1+xAl_xGe_2−x(PO₄)₃ Thin Films for Solid State Batteries,” Solid State Ionics 364 (2021): 115613.

[173] K. Zhang, F. Wu, X. Wang, et al., “8.5 µm-Thick Flexible-Rigid Hybrid Solid–Electrolyte/Lithium Integration for Air-Stable and Interface-Compatible All-Solid-State Lithium Metal Batteries,” Advanced Energy Materials 12, no. 24 (2022): 2200368.

[174] Q. Liu, Y. Liu, X. Jiao, et al., “Enhanced Ionic Conductivity and Interface Stability of Hybrid Solid-State Polymer Electrolyte for Rechargeable Lithium Metal Batteries,” Energy Storage Materials 23 (2019): 105–111.

[175] V. Siller, A. Morata, M. N. Eroles, et al., “High Performance LATP Thin Film Electrolytes for All-Solid-State Microbattery Applications,” Journal of Materials Chemistry A 9, no. 33 (2021): 17760–17769.

[176] P. Hofmann, F. Walther, M. Rohnke, J. Sann, W. G. Zeier, and J. Janek, “LATP and LiCoPO₄ Thin Film Preparation–Illustrating Interfacial Issues on the Way to All-Phosphate SSBS,” Solid State Ionics 342 (2019): 115054.

[177] L. Yuxiao, L. Lei, S. guangyue, et al., “Film-Forming and Ionic Conductivity Characteristics of LATP-PEO Composite Electrolyte,” China Powder Science and technology 26, no. 1 (2020): 8.

[178] H. Chen, H. Tao, X. Zhao, and Q. Wu, “Fabrication and Ionic Conductivity of Amorphous Li-Al-Ti-P-O Thin Film,” Journal of Non-Crystalline Solids 357, no. 16–17 (2011): 3267–3271.

[179] S. Takase, C. Kubo, R. Aono, and Y. Shimizu, “Sol-Gel Processing of Li_1.5Al_0.5Ti_1.5(PO₄)₃ Solid Electrolyte Thin Films via Polymeric Complex Precursor,” Journal of Sol-Gel Science and Technology 79, no. 3 (2016): 564–572.

[180] M. Zhang, Z. Huang, J. Cheng, et al., “Solid State Lithium Ionic Conducting Thin Film Li_1.4Al_0.4Ge_1.6(PO₄)₃ Prepared by Tape Casting,” Journal of Alloys and Compounds 590 (2014): 147–152.

[181] T. Mousavi, X. Chen, C. Doerrer, B. Jagger, S. C. Speller, and C. Grovenor, “Fabrication of Li_1+xAl_xGe_2−x(PO₄)₃ Thin Films by Sputtering for Solid Electrolytes,” Solid State Ionics 354 (2020): 115397.

[182] R. Inada, K. Ishida, M. Tojo, T. Okada, T. Tojo, and Y. Sakurai, “Properties of Aerosol Deposited NASICON-Type Li_1.5Al_0.5Ge_1.5(PO₄)₃ Solid Electrolyte Thin Films,” Ceramics International 41, no. 9 (2015): 11136–11142.

[183] Y. Liu, J. Li, Q. Shen, et al., “Advanced Characterizations and Measurements for Sodium-Ion Batteries With NASICON-Type Cathode Materials,” eScience 2, no. 1 (2022): 10–31.

[184] J. Kim, S. H. Jo, S. Bhavaraju, A. Eccleston, and S. O. Kang, “Low Temperature Performance of Sodium-Nickel Chloride Batteries With NaSICON Solid Electrolyte,” Journal of Electroanalytical Chemistry 759 (2015): 201–206.

[185] Z. Zhang, S. Wenzel, Y. Zhu, et al., “Na₃Zr₂Si₂PO₁₂: A Stable Na⁺-Ion Solid Electrolyte for Solid-State Batteries,” ACS Applied Energy Materials 3, no. 8 (2020): 7427–7437.

[186] J. Yang, Z. Gao, T. Ferber, et al., “Guided-Formation of a Favorable Interface for Stabilizing Na Metal Solid-State Batteries,” Journal of Materials Chemistry A 8, no. 16 (2020): 7828–7835.

[187] D. Liu, Z. Shadike, R. Lin, et al., “Review of Recent Development of In Situ/Operando Characterization Techniques for Lithium Battery Research,” Advanced Materials 31, no. 28 (2019): e1806620.

[188] W. C. West, J. F. Whitacre, and J. R. Lim, “Chemical Stability Enhancement of Lithium Conducting Solid Electrolyte Plates Using Sputtered LiPON Thin Films,” Journal of Power Sources 126, no. 1–2 (2004): 134–138.

[189] I. D. Johnson, T. E. Ashton, E. Blagovidova, et al., “Mechanistic Insights of Li⁺ Diffusion Within Doped LiFePO₄ From Muon Spectroscopy,” Scientific Reports 8 (2018): 4114.

[190] G. Liang, C. Didier, Z. Guo, W. K. Pang, and V. K. Peterson, “Understanding Rechargeable Battery Function Using in Operando Neutron Powder Diffraction,” Advanced Materials 32, no. 18 (2020): 1904528.

[191] I. Tomandl, T. Kobayashi, A. Cannavó, et al., “Investigation of Lithiation/Delithiation Processes in Ceramic Solid Electrolyte by Means of Neutron Depth Profiling,” Journal of Power Sources 542 (2022): 231719.

[192] J. S. Kim, K. W. Lee, J. J. Kweon, et al., “Structural Defects in LiCoO₂ Studied by ⁷Li Nuclear Magnetic Relaxation,” Applied Physics Letters 96, no. 6 (2010): 359.

[193] Y. Jin, N. J. H. Kneusels, P. C. M. M. Magusin, et al., “Identifying the Structural Basis for the Increased Stability of the Solid Electrolyte Interphase Formed on Silicon With the Additive Fluoroethylene Carbonate,” Journal of the American Chemical Society 139, no. 42 (2017): 14992–15004.

[194] Z. Wei, D. K. Singh, K. Helmbrecht, et al., “In Situ Observation of Room-Temperature Magnesium Metal Deposition on a NASICON/IL Hybrid Solid Electrolyte,” Advanced Energy Materials 13, no. 44 (2023): 2302525.

[195] S. Kaboli, G. Girard, W. Zhu, et al., “Thermal Evolution of NASICON Type Solid-State Electrolytes With Lithium at High Temperature via In Situ Scanning Electron Microscopy,” Chemical Communications 57, no. 84 (2021): 11076–11079.

[196] J. Zhu, J. Zhao, Y. Xiang, et al., “Chemo-Mechanical Failure Mechanism Study in NASICON-Type Li_1.3Al_0.3Ti_1.7(PO₄)₃ Solid-State Lithium Batteries,” Chemistry of Materials 32, no. 12 (2020): 4998–5008.

[197] H. Masuda, N. Ishida, Y. Ogata, D. Ito, and D. Fujita, “In Situ Visualization of Li Concentration in All-Solid-State Lithium Ion Batteries Using Time-of-Flight Secondary Ion Mass Spectrometry,” Journal of Power Sources 400 (2018): 527–532.

[198] L. He, J. A. S. Oh, K. Watarai, et al., “Electromechanical Failure of NASICON-Type Solid-State Electrolyte-Based All-Solid-State Li-Ion Batteries,” Chemistry of Materials 33, no. 17 (2021): 6841–6852.

[199] Y. Lin, M. Zhou, X. Tai, H. Li, X. Han, and J. Yu, “Analytical Transmission Electron Microscopy for Emerging Advanced Materials,” Matter 4, no. 7 (2021): 2309–2339.

[200] Z. Zhu, Y. Zhou, P. Yan, et al., “In Situ Mass Spectrometric Determination of Molecular Structural Evolution at the Solid Electrolyte Interphase in Lithium-Ion Batteries,” Nano Letters 15, no. 9 (2015): 6170–6176.

RIGHTS & PERMISSIONS

2025 The Author(s). Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.