Recycled graphite for more sustainable lithium-ion batteries

Abstract

The demand for lithium-ion batteries (LIBs) is driven largely by their use in electric vehicles, which is projected to increase dramatically in the future. This great success, however, urgently calls for the efficient recycling of LIBs at the end of their life. Herein, we describe a froth flotation-based process to recycle graphite—the predominant active material for the negative electrode—from spent LIBs and investigate its reuse in newly assembled LIBs. It has been found that the structure and morphology of the recycled graphite are essentially unchanged compared to pristine commercial anode-grade graphite, and despite some minor impurities from the recycling process, the recycled graphite provides a remarkable reversible specific capacity of more than 350 mAh g⁻¹. Even more importantly, newly assembled graphite‖NMC₅₃₂ cells show excellent cycling stability with a capacity retention of 80% after 1000 cycles, that is, comparable to the performance of reference full cells comprising pristine commercial graphite.

Keywords

anode / graphite / lithium-ion battery / recycling / sustainability

References

[1] Li M, Lu J, Chen Z, Amine K. 30 Years of lithium-ion batteries. Adv Mater. 2018; 30 (33): 1800561.

[2] Marinaro M, Bresser D, Beyer E, et al. Bringing forward the development of battery cells for automotive applications: perspective of R&D activities in China, Japan, the EU and the USA. J Power Sources. 2020; 459: 228073.

[3] Armand M, Axmann P, Bresser D, et al. Lithium-ion batteries—current state of the art and anticipated developments. J Power Sources. 2020; 479: 228708.

[4] Bai Y, Muralidharan N, Sun YK, Passerini S, Stanley Whittingham M, Belharouak I. Energy and environmental aspects in recycling lithium-ion batteries: concept of battery identity global passport. Mater Today. 2020; 41: 304- 315.

[5] Velázquez-Martínez O, Valio J, Santasalo-Aarnio A, Reuter M, Serna-Guerrero R. A critical review of lithium-ion battery recycling processes from a circular economy perspective. Batteries. 2019; 5 (4): 68.

[6] Werner D, Peuker UA, Mütze T. Recycling chain for spent lithium-ion batteries. Metals. 2020; 10 (3): 316.

[7] Porvali A, Aaltonen M, Ojanen S, et al. Mechanical and hydrometallurgical processes in HCl media for the recycling of valuable metals from Li-ion battery waste. Resour Conserv Recycl. 2019; 142: 257- 266.

[8] Vanderbruggen A, Hayagan N, Bachmann K, et al. Lithium-ion battery recycling─influence of recycling processes on component liberation and flotation separation efficiency. ACS ES&T Eng. 2022; 2 (11): 2130- 2141.

[9] Salces AM, Bremerstein I, Rudolph M, Vanderbruggen A. Joint recovery of graphite and lithium metal oxides from spent lithium-ion batteries using froth flotation and investigation on process water re-use. Miner Eng. 2022; 184: 107670.

[10] Kim Y, Matsuda M, Shibayama A, Fujita T. Recovery of LiCoO₂ from wasted lithium ion batteries by using mineral processing technology. Resour Process. 2004; 51 (1): 3- 7.

[11] Traore N, Kelebek S. Characteristics of spent lithium ion batteries and their recycling potential using flotation separation: a review. Miner Process Extr Metall Rev. 2022; 44 (3): 231- 259.

[12] Zhan R, Yang Z, Bloom I, Pan L. Significance of a solid electrolyte interphase on separation of anode and cathode materials from spent Li-ion batteries by froth flotation. ACS Sustainable Chem Eng. 2021; 9 (1): 531- 540.

[13] Vanderbruggen A, Sygusch J, Rudolph M, Serna-Guerrero R. A contribution to understanding the flotation behavior of lithium metal oxides and spheroidized graphite for lithium-ion battery recycling. Colloids Surf A. 2021; 626: 127111.

[14] Ruismäki R, Rinne T, Dańczak A, Taskinen P, Serna-Guerrero R, Jokilaakso A. Integrating flotation and pyrometallurgy for recovering graphite and valuable metals from battery scrap. Metals. 2020; 10 (5): 680.

[15] European Parliament. EU Legislation in progress: new EU regulatory framework for batteries setting sustainability requirements. 2021.

[16] Asenbauer J, Eisenmann T, Kuenzel M, Kazzazi A, Chen Z, Bresser D. The success story of graphite as a lithium-ion anode material—fundamentals, remaining challenges, and recent developments including silicon (oxide) composites. Sustainable Energy Fuels. 2020; 4 (11): 5387- 5416.

[17] European Commission. Critical raw materials resilience: charting a path towards greater security and sustainability. 2020.

[18] Vanderbruggen A, Salces A, Ferreira A, Rudolph M, Serna-Guerrero R. Improving separation efficiency in end-of-life lithium-ion batteries flotation using attrition pre-treatment. Minerals. 2022; 12 (1): 72.

[19] Vanderbruggen A, Gugala E, Blannin R, Bachmann K, Serna-Guerrero R, Rudolph M. Automated mineralogy as a novel approach for the compositional and textural characterization of spent lithium-ion batteries. Miner Eng. 2021; 169: 106924.

[20] Blyth RIR, Buqa H, Netzer FP, et al. XPS studies of graphite electrode materials for lithium ion batteries. Appl Surf Sci. 2000; 167 (1-2): 99- 106.

[21] Tuinstra F, Koenig JL. Raman spectrum of graphite. J Chem Phys. 1970; 53 (3): 1126- 1130.

[22] Ferrari AC, Robertson J. Interpretation of Raman spectra of disordered and amorphous carbon. Phys Rev B. 2000; 61 (20): 14095- 14107.

[23] Pimenta MA, Dresselhaus G, Dresselhaus MS, Cançado LG, Jorio A, Saito R. Studying disorder in graphite-based systems by Raman spectroscopy. Phys Chem Chem Phys. 2007; 9 (11): 1276- 1290.

[24] Nemanich RJ, Solin SA. First- and second-order Raman scattering from finite-size crystals of graphite. Phys Rev B. 1979; 20 (2): 392- 401.

[25] Foss CEL, Svensson AM, Sunde S, Vullum-Bruer F. Edge/basal/defect ratios in graphite and their influence on the thermal stability of lithium ion batteries. J Power Sources. 2016; 317: 177- 183.

[26] Placke T, Siozios V, Schmitz R, et al. Influence of graphite surface modifications on the ratio of basal plane to “non-basal plane” surface area and on the anode performance in lithium ion batteries. J Power Sources. 2012; 200: 83- 91.

[27] Markevich E, Salitra G, Aurbach D. Fluoroethylene carbonate as an important component for the formation of an effective solid electrolyte interphase on anodes and cathodes for advanced Li-ion batteries. ACS Energy Lett. 2017; 2 (6): 1337- 1345.

[28] Zhang XQ, Cheng XB, Chen X, Yan C, Zhang Q. Fluoroethylene carbonate additives to render uniform Li deposits in lithium metal batteries. Adv Funct Mater. 2017; 27 (10): 1605989.

[29] Dahn JR. Phase diagram of Li_xC₆. Phys Rev B. 1991; 44 (17): 9170- 9177.

[30] Heß M, Novák P. Shrinking annuli mechanism and stage-dependent rate capability of thin-layer graphite electrodes for lithium-ion batteries. Electrochim Acta. 2013; 106: 149- 158.

[31] Sivakkumar SR, Nerkar JY, Pandolfo AG. Rate capability of graphite materials as negative electrodes in lithium-ion capacitors. Electrochim Acta. 2010; 55 (9): 3330- 3335.

RIGHTS & PERMISSIONS

2024 The Authors. Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.