Demonstration of a small-scale power generator using supercritical CO₂

Abstract

The supercritical CO₂ (sCO₂) power cycle could improve efficiencies for a wide range of thermal power plants. The sCO₂ turbine generator plays an important role in the sCO₂ power cycle by directly converting thermal energy into mechanical work and electric power. The operation of the generator encounters challenges, including high temperature, high pressure, high rotational speed, and other engineering problems, such as leakage. Experimental studies of sCO₂ turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction. Unlike most experimental investigations that primarily focus on 100 kW- or MW-scale power generation systems, we consider, for the first time, a small-scale power generator using sCO₂. A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm, and a CO₂ transcritical power cycle test loop was constructed to validate the performance of our manufactured generator. A resistant gas was proposed in the constructed turbine expander to solve the leakage issue. Both dynamic and steady performances were investigated. The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm. The maximum total efficiency of the turbo-generator was 58.98%, which was affected by both the turbine rotational speed and pressure ratio, according to the proposed performance map.

Keywords

generator / performance map / power generation / supercritical CO₂ / turbine

References

[1] Varshil P, Deshmukh D. A comprehensive review of waste heat recovery from a diesel engine using organic Rankine cycle. Energy Rep. 2021; 7: 3951- 3970.

[2] IEA. World Energy Outlook 2020, License: CC BY 4.0. 2020. https://www.iea.org/reports/world-energy-outlook-2020

[3] Hata S, Maeshiro K, Shiraishi M, et al. Water-resistant organic thermoelectric generator with >10 μW output. Carbon Energy. 2022; 5 (4): e285.

[4] Wang L, Wang D, Li Y. Single-atom catalysis for carbon neutrality. Carbon Energy. 2022; 4 (6): 1021- 1079.

[5] Li Z, Liu X, Shao Y, Zhong W. Research and development of supercritical carbon dioxide coal-fired power systems. J Therm Sci. 2020; 29 (3): 546- 575.

[6] Wu P, Ma Y, Gao C, et al. A review of research and development of supercritical carbon dioxide Brayton cycle technology in nuclear engineering applications. Nucl Eng Des. 2020; 368: 110767.

[7] Ehsan MM, Guan Z, Gurgenci H, Klimenko A. Feasibility of dry cooling in supercritical CO₂ power cycle in concentrated solar power application: review and a case study. Renewable Sustainable Energy Rev. 2020; 132: 110055.

[8] Liu L, Yang Q, Cui G. Supercritical carbon dioxide(s-CO₂) power cycle for waste heat recovery: a review from thermodynamic perspective. Processes. 2020; 8 (11): 1461- 1472.

[9] Baronci A, Messina G, McPhail SJ, Moreno A. Numerical investigation of a MCFC (molten carbonate fuel cell) system hybridized with a supercritical CO₂ Brayton cycle and compared with a bottoming organic Rankine cycle. Energy. 2015; 93: 1063- 1073.

[10] White MT, Bianchi G, Chai L, Tassou SA, Sayma AI. Review of supercritical CO₂ technologies and systems for power generation. Appl Therm Eng. 2021; 185: 116447.

[11] Sarkar J. Review and future trends of supercritical CO₂ Rankine cycle for low-grade heat conversion. Renewable Sustainable Energy Rev. 2015; 48: 434- 451.

[12] Wen Q, Liu G, Rao Z, Liao S. Applications, evaluations and supportive strategies of distributed energy systems: a review. Energy Build. 2020; 225: 110314.

[13] Ren F, Wei Z, Zhai X. A review on the integration and optimization of distributed energy systems. Renewable Sustainable Energy Rev. 2022 162: 112440.

[14] Liu M, Shi Y, Fang F. Combined cooling, heating and power systems: a survey. Renewable Sustainable Energy Rev. 2014; 35: 1- 22.

[15] Lu Q, Chai J, Wang S, Zhang ZG, Sun XC. Potential energy conservation and CO₂ emissions reduction related to China's road transportation. J Clean Prod. 2020; 245: 118892.

[16] Huang G, Shu G, Tian H, et al. Development and experimental study of a supercritical CO₂ axial turbine applied for engine waste heat recovery. Appl Energy. 2020; 257: 113997.

[17] Crespi F, Gavagnin G, Sánchez D, Martínez GS. Supercritical carbon dioxide cycles for power generation: a review. Appl Energy. 2017; 195: 152- 183.

[18] Utamura M, Hasuike H, Yamamoto T. Demonstration test plant of closed cycle gas turbine with supercritical CO₂ as working fluid. Strojarstvo. 2011; 52 (4): 459- 465.

[19] Mounier V, Olmedo LE, Schiffmann J. Small scale radial inflow turbine performance and pre-design maps for organic Rankine cycles. Energy. 2018; 143: 1072- 1084.

[20] Shao W, Du J, Yang J, Wang X, Lyu G. Investigation on onedimensional loss models for predicting performance of multistage centrifugal compressors in supercritical CO₂ Brayton cycle. J Therm Sci. 2020; 30 (1): 133- 148.

[21] Qi J, Reddell T, Qin K, Hooman K, Jahn IHJ. Supercritical CO₂ radial turbine design performance as a function of turbine size parameters. J Turbomach. 2017; 139 (8): 1191.

[22] Cho SK, Lee J, Lee JI, Cha JE. S-CO₂ turbine design for decay heat removal system of sodium cooled fast reactor. ASME Turbo Expo 2016: Yutbomachinery Technical Conference and Exposition. 2016; 49873: V009T36A006.

[23] Unglaube T, Chiang H-WD. Preliminary design of small-scale supercritical CO₂ radial inflow turbines. J Eng Gas Turbines Power. 2020; 142 (2): 021011.

[24] Janke C, Bestle D, Becker B. Compressor map computation based on 3D CFD analysis. CEAS Aeronaut J. 2015; 6 (4): 515- 527.

[25] Zhou A, Song J, Li X, Ren X, Gu C. Aerodynamic design and numerical analysis of a radial inflow turbine for the supercritical carbon dioxide Brayton cycle. Appl Therm Eng. 2018; 132: 245- 255.

[26] Pham HS, Alpy N, Ferrasse JH, et al. An approach for establishing the performance maps of the sc-CO₂ compressor: development and qualification by means of CFD simulations. Int J Heat Fluid Flow. 2016; 61: 379- 394.

[27] Yu Y, Chen L, Sun F, Wu C. Neural-network based analysis and prediction of a compressor's characteristic performance map. Appl Energy. 2007; 84 (1): 48- 55.

[28] Bao C, Ouyang M, Yi B. Modeling and optimization of the air system in polymer exchange membrane fuel cell systems. J Power Sources. 2006; 156 (2): 232- 243.

[29] Wu B. Dynamic performance simulation analysis method of split shaft gas turbine based on RBF neural network. Energy Rep. 2021; 7: 947- 958.

[30] Saeed M, Berrouk AS, Burhani BM, Alatyar AM, Wahedi YFA. Turbine design and optimization for a supercritical CO₂ cycle using a multifaceted approach based on deep neural network. Energies. 2021; 14 (22): 7807.

[31] Pasch J, Stapp D. Testing of a new turbocompressor for supercritical carbon dioxide closed Brayton cycles. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 2018; 51180: V009T38A024.

[32] Wright SA, Conboy TM, Radel RF, Rochau GE. Modeling and Experimental Results for Condensing Supercritical CO₂ Power Cycles (SAND2010-8840, TRN: US201201%%299). United States. 2011. https://www.osti.gov/servlets/purl/1030354

[33] Wright SA, Conboy TM, Rochau GE. Break-even power transients for two simple recuperated s-CO₂ Brayton cycle test configurations. Paper presented at: Supercritcal CO₂ Power Cycle Symposium; May 24-25, 2011; Boulder, CO. https://www.osti.gov/biblio/1108096

[34] Conboy T, Wright S, Pasch J, Fleming D, Rochau G, Fuller R. Performance characteristics of an operating supercritical CO₂ Brayton cycle. J Eng Gas Turbines Power. 2012; 134 (11): 111703.

[35] Pasch J, Carlson M, Fleming D, Rochau G. Evaluation of recent data from the Sandia National Laboratories closed Brayton cycle testing. ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition. 2016; 49873: V009T36A015.

[36] Walker M, Fleming DD, Pasch JJ. Gas foil bearing coating behavior in environments relevant to s-CO₂ power system turbomachinery. Paper presented at: The 6th International Supercritical CO₂ Power Cycles Symposium; March 27-29, 2018; Pittsburgh, PA. https://www.osti.gov/biblio/1513648

[37] Rapp LM. Experimental testing of a 1MW sCO₂ turbocompressor. Paper presented at: The 7th International Supercritical CO₂ Power Cycles Symposium; March 31-April 2, 2020; San Antonio, TX. https://www.osti.gov/biblio/1513648

[38] Fleming D, Holschuh T, Conboy T, Rochau G, Fuller R. Scaling considerations for a multi-megawatt class supercritical CO₂ Brayton cycle and path forward for commercialization. Paper presented at: ASME Turbo Expo 2012: Turbine Technical Conference and Exposition; June 2012, pp. 953- 960.

[39] Clementoni EM, Cox TL, Sprague CP. Startup and operation of a supercritical carbon dioxide Brayton cycle. J Eng Gas Turbines Power. 2014; 136 (7): 94275.

[40] Clementoni EM, Cox TL. Practical aspects of supercritical carbon dioxide Brayton system testing. Paper presented at: The 4th International Symposium; September 9-10, 2014; Pittsburgh, PA.

[41] Clementoni EM, Cox TL, King MA. Off-nominal component performance in a supercritical carbon dioxide Brayton cycle. J Eng Gas Turbines Power. 2016; 138 (1): 011703.

[42] Clementoni EM, Cox TL. Effect of compressor inlet pressure on cycle performance for a supercritical carbon dioxide Brayton cycle. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 2018; 9: 75182.

[43] Ahn Y, Lee J, Kim SG, Lee JI, Cha JE, Lee S-W. Design consideration of supercritical CO₂ power cycle integral experiment loop. Energy. 2015; 86: 115- 127.

[44] Bae SJ, Ahn Y, Lee J, Kim SG, Baik S, Lee JI. Experimental and numerical investigation of supercritical CO₂ test loop transient behavior near the critical point operation. Appl Therm Eng. 2016; 99: 572- 582.

[45] Cha JE. Operation results of a closed supercritical CO₂ simple Brayton cycle. Paper presented at: The 5th International Symposium; March 28-31, 2016; San Antonio, Texas.

[46] Park JH, Cha JE, Lee SW. Experimental investigation on performance test of 150-kW-class supercritical CO₂ centrifugal compressor. Appl Therm Eng. 2022; 210: 118310.

[47] Cha JE, Park JH, Lee G, et al. 500 kW supercritical CO₂ power generation system for waste heat recovery: system design and compressor performance test results. Appl Therm Eng. 2021; 194: 117028.

[48] Cho J, Shin H, Cho J, et al. Development of the supercritical carbon dioxide power cycle experimental loop with a turbo-generator. ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. 2017; 9: 64287.

[49] Cho J, Choi M, Baik Y-J, et al. Development of the turbomachinery for the supercritical carbon dioxide power cycle. Int J Energy Res. 2016; 40 (5): 587- 599.

[50] Muhammad HA, Lee B, Imran M, et al. Investigating supercritical carbon dioxide power cycles and the potential of improvement of turbine leakage characteristics via a barrier gas. Appl Therm Eng. 2021; 188: 116601.

[51] Cho J, Shin H, Cho J, et al. Development and operation of supercritical carbon dioxide power cycle test loop with axial turbo-generator. ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. 2018; 9: 76488.

[52] Choi B, Cho J, Cho J, et al. Development of a 500℃ semi-pilot scale supercritical CO₂ power cycle test loop. AIP Conf Proc. 2022; 2445 (1): 090003.

[53] Held TJ. Initial test results of a megawatt-class supercritical CO₂ heat engine. Paper presented at: The 4th International Symposium-supercritical CO₂ power cycles; September 9-10, 2014; Pittsburgh, PA.

[54] Miller H, Sedlacko H. Test results of a 1.5 MW high speed motor-generator in a pressurized CO₂ environment. Paper presented at: The 6th International Supercritical CO₂ Power Cycles Symposium; March 27-29, 2018; Pittsburgh, PA.

[55] Moore J, Brun K, Evans N, Kalra C. Development of 1 MWe supercritical CO₂ test loop. Paper presented at: The 4th International Symposium-Supercritical CO₂ Power Cycles; September 9-10, 2014; Pittsburgh, PA.

[56] Kalra CS, Sevincer E, Brun K, Antonio S, Hofer DC, Moore JJ. Development of high efficiency hot gas turboexpander for optimized CSP supercritical CO₂ power block operation. Paper presented at: The 4th International Symposium-Supercritical CO₂ Power Cycles; September 9-10, 2014; Pittsburgh, PA.

[57] Moore J, Cich S, Towler M, et al. Commissioning of a 1 MWe supercritical CO₂ test loop. Paper presented at: The 6th International Supercritical CO₂ Power Cycles Symposium; March 27-29, 2018; Pittsburgh, PA.

[58] Bianchi G, Saravi SS, Loeb R, et al. Design of a hightemperature heat to power conversion facility for testing supercritical CO₂ equipment and packaged power units. Energy Procedia. 2019; 161: 421- 428.

[59] Marchionni M, Bianchi G, Tassou SA. Transient analysis and control of a heat to power conversion unit based on a simple regenerative supercritical CO₂ Joule-Brayton cycle. Appl Therm Eng. 2021; 183: 116214.

[60] Huang G, Shu G, Tian H, Shi L, Zhuge W, Tao L. Experiments on a small-scale axial turbine expander used in CO₂ transcritical power cycle. Appl Energy. 2019; 255: 113853.

[61] Chu S, Majumdar A. Opportunities and challenges for a sustainable energy future. Nature. 2012; 488 (7411): 294- 303.

[62] Wright SA, Radel RF, Vernon ME, Pickard PS, Rochau GE. Operation and analysis of a supercritical CO₂ Brayton cycle (SAND2010-0171). 2010. https://www.osti.gov/biblio/984129

[63] Dyreby JJ. Modeling the supercritical carbon dioxide Brayton cycle with recompression. ProQuest LLC; 2014.

[64] Hasuike H, Yamamoto T, Fukushima T, Watanabe T, Utamura M, Aritomi M. Test plan and preliminary test results of a bench scale closed cycle gas turbine with supercritical CO₂ as working fluid: Proceedings of the ASME Turbo Expo 2010: Power for Land, Sea, and Air. Volume 3: Controls, Diagnostics and Instrumentation; Cycle Innovations; Marine, Glasgow, UK, 14-18 June, 2010. ASME; 2010.

[65] Utamura M, Hasuike H, Ogawa K, et al. Demonstration of supercritical CO₂ closed regenerative Brayton cycle in a bench scale experiment: Proceedings of the ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. Volume 3: Cycle Innovations; Education; Electric Power; Fans and Blowers; Industrial and Cogeneration, Copenhagen, Denmark, 11-15 June 2012. ASME; 2012.

[66] Li L, Tian H, Shi L, et al. Experimental investigation of a splitting CO₂ transcritical power cycle in engine waste heat recovery. Energy. 2022; 244: 123126.

[67] Bell IH, Wronski J, Quoilin S, Lemort V. Pure and pseudopure fluid thermophysical property evaluation and the opensource thermophysical property library CoolProp. Ind Eng Chem Res. 2014; 53 (6): 2498- 2508.

[68] Wang X, Wang R, Jin M, Shu G, Tian H, Pan J. Control of superheat of organic rankine cycle under transient heat source based on deep reinforcement learning. Appl Energy. 2020; 278: 115637.

[69] Kimball KJ, Rahner KD, Nehrbauer JP, Clementoni EM. Supercritical carbon dioxide Brayton cycle development overview. ASME Turbo Expo 2013: Turbomachinery Technical Conference and Exposition. 2013; 8: 94268.

[70] Cich SD, Moore JJ, Day Towler M, Mortzheim J, Hofer D. Loop filling and start up with a closed loop sCO₂ Brayton cycle: Proceedings of the ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition. Volume 9: Oil and Gas Applications; Supercritical CO₂ Power Cycles; Wind Energy, Phoenix, AZ, 17-21 June 2021. ASME; 2019.

[71] Uusitalo A, Ameli A, Turunen-Saaresti T. Thermodynamic and turbomachinery design analysis of supercritical Brayton cycles for exhaust gas heat recovery. Energy. 2019; 167: 60- 79.

RIGHTS & PERMISSIONS

2024 2024 The Authors. Carbon Energy published by Wenzhou University and John Wiley & Sons Australia, Ltd.