Bony contouring in head and neck microvascular reconstruction

Abstract

Head and neck reconstruction has evolved substantially in the last three decades to rely heavily on microvascular free tissue transfer, including bony composite flaps that improve form and functional outcomes. The technologies available for planning and executing bony reconstruction have undergone concurrent innovation, leaving the modern surgeons with a host of options to consider. In this review, the techniques of external fixation, virtual surgical planning and rapid prototyping are discussed with the aim of familiarizing surgeons and comparing these approaches. External fixation, though not new to head and neck surgery, has seen a revival and has considerable utility in vascularized bony reconstruction with the potential for improved efficiency and cost control. We explore the clinical situations in which virtual surgical planning is best employed, and the varying levels to which it can be applied throughout the reconstructive process. The ever-expanding realm of rapid prototyping, or 3D printing, is also examined to explore potential applications for surgical modeling, tissue engineering and even clinical training. Finally, we present a discussion of the cost-effectiveness of the technologies and future directions for research in the field.

Keywords

Head and neck / microvascular reconstruction / external fixation / virtual surgical planning / rapid prototyping

References

[1] Hernigou P.History of external fixation for treatment of fractures.Int Orthop2017;41:845-53

[2] Roberts WR.Control of mandibular fragments by external fixation.Br Dent J1946;80:257

[3] Kazi AA,Vincent A,Sheen D.The role of external fixation in trauma and reconstruction of the mandible in the age of rigid fixation.Facial Plast Surg2019;35:614-22

[4] Marmulla R.Surgical planning of computer-assisted repositioning osteotomies.Plast Reconstr Surg1999:104:938-44

[5] Culie D,Poissonnet G,Fernandez J.Virtual planning and guided surgery in fibular free-flap mandibular reconstruction: a 29-case series.Eur Ann Otorhinolaryngol Head Neck Dis 2016;133:175-8

[6] Azuma M,Ishibashi-Kanno N.Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity.Head Face Med 2014;10:45 PMCID:PMC4213462

[7] Yan R,Qin X,Rong Q.Digital modeling for the individual mandibular 3D mesh scaffold based on 3D printing technology.Zhonghua Kou Qiang Yi Xue Za Zhi2016;51:280-5

[8] Shehab M, Hamid NMA, Askar NA, Elmardenly AM. Immediate mandibular reconstruction via patient-specific titanium mesh tray using electron beam melting/CAD/rapid prototyping techniques: One-year follow-up. Int J Med Robot 2018;14:e1895

[9] Bergman SA,Didolkar MS.Maintenance of function and esthetics after partial mandibulectomy without bone grafting.J Oral Surg1981;39:421-5

[10] Louis PJ.Temporary stabilization of the mandible with an external fixation device.J Oral Maxillofac Surg2001;59:1374-5

[11] Urken ML,Vickery C,Lawson W.Oromandibular reconstruction using microvascular composite free flaps. Report of 71 cases and a new classification scheme for bony, soft-tissue, and neurologic defects.Arch Otolaryngol Head Neck Surg1991;117:733-44

[12] Foster RD,Sharma A.Vascularized bone flaps versus nonvascularized bone grafts for mandibular reconstruction: An outcome analysis of primary bony union and endosseous implant success.Head Neck 1999;21:66-71

[13] Cordeiro PG,Hidalgo DA.Reconstruction of the mandible with osseous free flaps: a 10-year experience with 150 consecutive patients.Plast Reconstr Surg1999;104:1314-20

[14] Ung F,Deschler DG.Temporary intraoperative external fixation in mandibular reconstruction.Laryngoscope2002;112:1569-73

[15] Cornelius CP,Sailer LK.External pin fixation for stabilization of the mandible--comeback of a method: historical review and first experiences with the 'mandible external fixator'.Oral Maxillofac Surg2009;13:1-14

[16] Witjes MJH,Kraeima J.Impact of 3D virtual planning on reconstruction of mandibular and maxillary surgical defects in head and neck oncology. Curr Opin Otolaryngol Head Neck Surg2018;26:108-14

[17] Vural E.Combining use of resin models with external fixation in mandibular reconstruction.Arch Otolaryngol Head Neck Surg2007;133:603-7

[18] Schouman T,Chaine C,Goudot P.Surgery guided by customized devices: reconstruction with a free fibula flap.Rev Stomatol Chir Maxillofac Chir Orale 2014;115:28-36

[19] Hanasono MM.Computer-assisted design and rapid prototype modeling in microvascular mandible reconstruction.Laryngoscope 2013;123:597-604

[20] Seruya M,Rodriguez ED.Computer-assisted versus conventional free fibula flap technique for craniofacial reconstruction: an outcomes comparison.Plast Reconstr Surg2013;132:1219-28

[21] Chang EI,Patel SA.Long-term operative outcomes of preoperative computed tomography-guided virtual surgical planning for osteocutaneous free flap mandible reconstruction.Plast Reconstr Surg2016;137:619-23

[22] Zhang L,Li B,Shen SG.Evaluation of computer-assisted mandibular reconstruction with vascularized fibular flap compared to conventional surgery.Oral Surg Oral Med Oral Pathol Oral Radiol2016;121:139-48

[23] Fatima A,Wood JS.Cost-effectiveness analysis of virtual surgical planning in mandibular reconstruction.Plast Reconstr Surg 2019;143:1185-94

[24] Zweifel DF,Hoarau R,Broome M.Are virtual planning and guided surgery for head and neck reconstruction economically viable?.J Oral Maxillofac Surg 2015;73:170-5

[25] Toto JM,Agag R,Patel SA.Improved operative efficiency of free fibula flap mandible reconstruction with patient-specific, computer-guided preoperative planning.Head Neck 2015;37:1660-4

[26] Mazzola F,Cheng K.Time and cost-analysis of virtual surgical planning for head and neck reconstruction: A matched pair analysis.Oral Oncol 2020;100:104491

[27] Saad A,Wise MW,St Hilaire H.Virtual surgical planning in complex composite maxillofacial reconstruction. Plast Reconstr Surg 2013;132:626-33

[28] Largo RD.Updates in head and neck reconstruction.Plast Reconstr Surg2018;141:271e-85e

[29] Matros E,Cordeiro PG.Standardized templates for shaping the fibula free flap in mandible reconstruction. J Reconstr Microsurg 2013;29:619-22.

[30] Kaye R,Zeltsman D,Smith LP.Three dimensional printing: A review on the utility within medicine and otolaryngology.Int J Pediatr Otorhinolaryngol2016;89:145-8

[31] D'urso PS,Earwaker WJ.Stereolithographic biomodelling in cranio-maxillofacial surgery: a prospective trial.J Craniomaxillofac Surg1999;27:30-7

[32] Velasco I,Ramos H.Low-cost method for obtaining medical rapid prototyping using desktop 3D printing: a novel technique for mandibular reconstruction planning.J Clin Exp Dent2017;9:e1103-8 PMCID:PMC5650212

[33] Hong CJ,Hong BY.Clinical applications of three-dimensional printing in otolaryngology-head and neck surgery: A systematic review.Laryngoscope2019;129:2045-52

[34] Chan HH,Vescan A,Prisman E.3D rapid prototyping for otolaryngology-head and neck surgery: applications in image-guidance, surgical simulation and patient-specific modeling.PLoS One2015;10:e0136370 PMCID:PMC4557980

[35] Suzuki M,Kawano A,Yamaguchi H.Rapid prototyping of temporal bone for surgical training and medical education.Acta Otolaryngol2004;124:400-2